Self Organization and Redox Behavior of Poly(vinylferrocene)-block-Poly(isobutylene)-block-Poly(vinylferrocene) Triblock Copolymer †

Self organization and redox behavior of a ferrocene containing triblock copolymer, poly(vinylferrocene)-block-poly(isobutylene)-block-poly(vinylferrocene), with narrow molecular weight distribution in solutions and in thin films were investigated. Dynamic light scattering studies of the block copolymer in dilute solutions indicated that the polymer chains aggregated at relatively low concentrations. The aggregations of polymer chains were observed in toluene, as well as in tetrahydrofuran at concentrations as low as 0.014 mg/mL and 0.0045 mg/mL, respectively. Thin films of the copolymer showed reversible single electron redox behavior, similar to that of ferrocene. Morphology and micro-phase separation of the copolymer was analyzed by transmission electron microscopy.     

Properties of a poly(ethylene glycol)-<Emphasis Type="Italic">block</Emphasis>-poly(<Emphasis Type="Italic">γ</Emphasis>-benzyl <Emphasis Type="SmallCaps">l</Emphasis>-glutamate)-<Emphasis Type="Italic">graft</Emphasis>-poly(ethylene glycol) copolymer membrane

Poly(ethylene glycol)-block-poly(γ-benzyl l-glutamate)-graft-poly(ethylene glycol) (PEG-block-PBLG-graft-PEG) copolymer was synthesized by the ester exchange reaction of PBLG-block-PEG copolymer with a PEG chain. Surface morphology of the PEG-block-PBLG-graft-PEG copolymer membrane was characterized by atomic force microscopy (AFM). Mechanical and chemical properties of the PEG-block-PBLG-graft-PEG copolymer membrane were investigated by tensile testing and contact angle testing. The effects of grafting ratio on the properties of PEG-block-PBLG-graft-PEG copolymer membrane were primarilly studied.     

Effects of denaturing acid on the self-association behaviour of poly(ethylene glycol)-block-poly(γ-benzyl l-glutamate)-graft-poly(ethylene glycol) copolymer in ethanol

Poly(ethylene glycol)-block-poly(γ-benzyl l-glutamate)-graft-poly(ethylene glycol) (PEG-b-PBLG-g-PEG) copolymer was synthesised by the ester exchange reaction of PEG-block-PBLG copolymer with mPEG. The self-association behaviour of PEG-b-PBLG-g-PEG in mixtures of ethanol, chloroform, and trifluoroacetic acid as denaturing acid was investigated by transmission electron microscopy, nuclear magnetic resonance spectroscopy, FT-IR spectroscopy, dynamic light scattering, and viscometry. It was revealed that the increase in denaturing acid content in the mixed system not only promoted the critical micelle concentration but also changed the morphology of the polymeric micelles from elliptical to spherical.     

Aggregation Behavior of Pluronic-L64 in Presence of Sodium Dodecyl Sulphate in Water

The effect of sodium dodecyl sulfate (SDS) on the micellization and aggregation behavior of a poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (PEO-PPO-PEO) amphiphilic copolymer (Pluronic L64: EO₁₃ PO₃₀ EO₁₃) have been investigated by various techniques like, cloud point, viscosity, isothermal titration calorimetry (ITC), differential scanning calorimetry (DSC), fluorescence spectroscopy, room temperature phosphorescence (RTP), and small angle neutron scattering (SANS). Addition of SDS in L64 solutions shows mark alteration of different properties. We observed synergistic interaction between SDS and Pluronic L64. The changes in the critical micelle concentration (CMC), critical micelle temperature (CMT), cloud point (CP), micelle size, and shape has been correlated and reported in terms of structure dynamics and mechanics. The ITC titrations have been used to explore the different stages of binding and interactions of SDS with L64. The enthalpies of aggregation for copolymer-SDS aggregates binding, organizational change of bound aggregates, and the threshold concentrations of SDS in the presence of copolymer were estimated directly from ITC titration curves. The effect of temperature on enthalpy values has been reported in terms of different aggregation state. Fluorescence and RTP for L64 were used to investigate the change in micellar environment on the addition of SDS at different temperature. Appearance and shifting of SANS peaks have been used to monitor the size and inter micellar interaction on addition of SDS in L64 solution. Cloud point and viscosity elaborate the penetration of SDS molecule in L64 micelle and hence changing the micellar architect.     

Synthesis and Characterization of Thermo-responsive Poly(N-vinyl-2-pyrrolidinone)-block-poly(N-isopropylacrylamide) Micelles

A novel thermo-responsive diblock copolymer of poly(N-vinyl-2-pyrrolidinone)-block-poly(N-isopropylacrylamide) (PNVP-b-PNIPAM) was synthesized. FT-IR, ¹H-NMR and SEC results confirmed the successful synthesis of PNVP-b-PNIPAM diblock copolymer via anionic polymerization. The polymeric micelles formed from PNVP-b-PNIPAM copolymer in aqueous solution were developed and characterized as a potential thermo-responsive and biocompatible drug delivery system. Micellization of the diblock copolymer in aqueous solution was characterized by dynamic laser scattering (DLS), turbidity measurement, tension measurement and transmission electron microscopy (TEM). The thermo-responsive polymeric micelles with the size ranges of 200 to 260 nm and thickness of 30 nm are localized, selected and targeted for drug release, having a great potential in response to external-stimulus such as temperatures from 35 to 39°C. The critical micellization concentration (cmc) of PNVP-b-PNIPAM in aqueous solution is 0.0026 wt% determined by turbidity measurement. The size of micelles determined by DLS increased from 163 to 329 nm with increasing concentration of PNVP-b-PNIPAM from 0.25 to 0.5 wt% in aqueous solution at 40°C, which is determined by DLS.     

Viscoelastic behavior,order-disorder transition,and phase equilibria in mixtures of a block copolymer and an endblock-associating resin

The viscoelastic behavior, order-disorder transition, and phase equilibria in mixtures of a block copolymer and an endblock-associating resin were investigated. The block copolymer was a polystyrene-block-polyisoprene-block-polystyrene (KRATON® D-1107, Shell Development Co.) copolymer. The endblock-associating resins investigated were two different grades of a commercially available random copolymer of poly(α-methyl styrene) and polystyrene, one with a weight-average molecular weight \[\bar M_{\rm w}\] of 710 (KRISTALEX® 3085, Hercules Inc.) and the other with \[\bar M_{\rm w}\] = 4100 (KRISTALEX® 5140, Hercules Inc.). Mixtures of various proportions of the block copolymer and the endblock-associating resin were prepared in toluene solvent. With the mixtures, measurements of dynamic viscoelastic properties were made, namely, dynamic storage modulus G″ and dynamic loss modulus G″ as a function of temperature from temperature scans of the samples using a Rheometrics Mechanical Spectrometer. The following observations were made. (1) The plateau modulus of the block copolymer increased with increasing amount of KRISTALEX 3085 or KRISTALEX 5140, indicating that the low-molecular-weight resin was associated with the polystyrene microdomains of the block copolymer. (2) When KRISTALEX 3085 (up to 30 wt %) was added to the block copolymer, the glass transition temperature (T_g) of the polyisoprene midblock of the SIS block copolymer was shifted toward higher temperatures, indicating that part of the KRISTALEX 3085 added had associated with the rubbery midblock of the block copolymer. Also investigated was the order-disorder transition behavior of the mixtures, using a rheological technique (log G′ versus log G″ plots) recently introduced by Han and Kim. It has been found that the order-disorder transition temperature T_r of mixtures of the SIS block copolymer and KRISTALEX 3085 decreased steadily with increasing amount of KRISTALEX 3085, whereas the addition of KRISTALEX 5140 increased the T_r of the block copolymer. It was found by light scattering and hot-stage microscopy that macrophase separation occurred in the KRATON 1107/KRISTALEX 5140 mixtures while microdomains of polystyrene were present in the block copolymer.     

Self-assembled tri-block terpolymer blend membranes reinforced with poly(methyl methacrylate)-coated gold nanoparticles obtained through phase inversion technique

The blend membranes of polystyrene-block-polyisoprene-block-polystyrene and polyethylene-block-poly(ethylene glycol)-block-polycaprolactone were designed using the phase inversion technique. The poly(methyl methacrylate)-coated gold nanoparticles are around 40–50 nm in size. The honeycomb-shaped nanopores were uniformly dispersed in polystyrene-block-polyisoprene-block-polystyrene/polyethylene-block-poly(ethylene glycol)-block-polycaprolactone/poly(methyl methacrylate)-coated gold nanoparticles blend membranes. There was a 16% increase in tensile strength and a 33% increase in tensile modulus of polystyrene-block-polyisoprene-block-polystyrene/polyethylene-block-poly(ethylene glycol)-block-polycaprolactone/poly(methyl methacrylate)-coated gold nanoparticles 1 relative to the neat membrane. With 1 wt% nanoparticles, the membrane showed a higher water flux of 59.2 mL cm^?2 min^?1 and a salt rejection ratio of 25.4%, while the polystyrene-block-polyisoprene-block-polystyrene/polyethylene-block-poly(ethylene glycol)-block-polycaprolactone membrane without poly(methyl methacrylate)-coated gold nanoparticles had lower flux (43.8 mL cm^?2 min^?1) and salt rejection (18.5%).     

Viscoelastic behavior and order-disorder transition in mixtures of a block copolymer and a midblock-associating resin

The viscoelastic behavior and order-disorder transition in mixtures of a block copolymer and a midblock-associating resin were investigated. The block copolymers investigated were polystyrene-block-polysioprene-block-polystyrene (SIS) copolymers (Shell Development Company), specifically Kraton D-1107, with the block molecular weights 10,000S-120,000I-10,000S, and Kraton D-1111, with the block molecular weights 15,000S-100,000I-15,000S. The midblock-associating resin investigated was a resin polymerized from C₅ hydrocarbon, referred to as Piccotac 95BHT (Hercules Inc.), which is an aliphatic hydrocarbon containing considerable amounts of cyclic structures, with a weight-average molecular weight of 1,100 and a glass transition temperature T_g of 43°C. In the investigation, mixtures of the block copolymer and Piccotac 95BHT were prepared with toluene as solvent. Temperature scans of the samples were made to obtain information on dynamic storage modulus G′, dynamic loss modulus G″, and loss tangent tan δ, using a Rheometrics dynamic mechanical spectrometer. It was found that Piccotac 95BHT decreased the plateau modulus G⁰_N and increased the T_g of the polyisoprene midblock of the SIS block copolymer in the mixture. This experimental observation led to the conclusion that Piccotac 95BHT associates (or is compatible) with the rubbery polyisoprene midblock of the SIS block copolymer. The order-disorder transition behavior of mixtures of SIS block copolymer and Piccotac 95BHT was also investigated by a rheological technique proposed by Han and Kim (Ref. 21). The order-disorder transition temperature T_r (i.e., the temperature at which the ordered microdomain structure of the block copolymer completely disappears) of the SIS block copolymer decreased steadily with increasing amount of Piccotac 95BHT in the mixture. With the information determined on T_r, a phase diagram for the mixture was constructed, showing the boundary between the mesophase and homogeneous phase in the mixture. The phase diagram is in qualitative agreement with the theoretical predictions of Whitmore and Noolandi (Ref. 28).     

Autonomous Volume Transitions of a Polybase Triblock Copolymer Gel in a Chemically Driven pH-Oscillator

Summary: A pH-responsive ABA triblock copolymer, comprising poly(methyl methacrylate)-block-poly(2-(diethylamino)ethyl methacrylate)-block-poly(methyl methacrylate) [PMMA-b-PDEA-b-PMMA], has been cast into thin films with a well-defined microstructure. Small Angle X-ray Scattering (SAXS) and Atomic Force Microscopy (AFM) studies confirm that this copolymer forms a hydrogel consisting of PMMA spheres embedded within a polybase PDEA matrix, with the PMMA domains acting as physical cross-links. The hydrogel has a pH-reversible coil-globule transition at around pH 4.5. This responsive physical property was exploited by immersing a sample of copolymer hydrogel in an aqueous solution containing a cyclic pH-oscillating reaction, whereby the pH was continuously oscillated above and below the transition pH so as to induce autonomous volume transitions. The changes in microscopic and macroscopic length scales correlate closely during (de)swelling cycles, with affine behaviour occurring over five orders of magnitude.     

Synthesis of Amphiphilic ABCBA-Type Pentablock Copolymer from Consecutive ATRPs and Self-Assembly in Aqueous Solution

Summary: A novel amphiphilic ABCBA-type pentablock copolymer with properties that are sensitive to temperature and pH, poly(2-dimethylaminoethyl methacrylate)-block-poly(2,2,2-trifluoroethyl methacrylate)-block-poly(ε-caprolactone)-block-poly(2,2,2- trifluoroethyl methacrylate)-block-poly(2-dimethylaminoethyl methacrylate) (PDMAEMA- b-PTFEMA-b-PCL-b-PTFEMA-b-PDMAEMA), was synthesized via consecutive atom transfer radical polymerizations (ATRPs). The copolymers obtained were characterized by gel permeation chromatography (GPC) and ¹H nuclear magnetic resonance (NMR) spectroscopy, respectively. The aggregation behaviors of the pentablock copolymers in aqueous solution with different pH (pH = 4.0, 7.0 and 8.5) were studied. Transmission electron microscopic images revealed that spherical micelles from self-assembly of the pentablock copolymer were prevalent in all cases. The mean diameters of these micelles increased from 34, 46, to 119 nm when the pH of the aqueous solution decreased from 8.5, 7.0, to 4.0, respectively.     

Study on Self-assembly of Poly(ethylene glycol)- block-poly(γ-benzyl L -glutamate)-graft-poly(ethylene glycol) Copolymer and Poly(γ-benzyl L -glutamate)- block-poly(ethylene glycol) Copolymer in Ethanol

Poly(ethylene glycol)-block-poly(γ-benzyl L-glutamate)-graft-poly(ethylene glycol) (PEG-b-PBLG-g-PEG) copolymer was synthesized by the ester exchange reaction of poly(γ-benzyl L-glutamate)-block-poly(ethylene glycol) (PBLG-block-PEG) copolymer with PEG chain, and PBLG-block-PEG copolymer was prepared by a standard N-carboxyl-γ-benzyl-L-glutamate anhydride (NCA) method. Nuclear magnetic resonance (NMR) spectroscopy was used to confirm the components of PBLG-block-PEG and PEG-b-PBLG-g-PEG. The self-association behaviors of PBLG-block-PEG and PEG-b-PBLG-g-PEG in ethanol were investigated by transmission electron microscopy (TEM), dynamic laser scattering (DLS), and viscometry. The experimental results revealed that the different molecular structures could exert marked effects on the self-assembly behaviors of PBLG-block-PEG and PEG-b-PBLG-g-PEG in ethanol. PBLG-block-PEG and PEG-b-PBLG-g-PEG could self-assemble to form polymeric micelles with a core-shell structure in the shapes of plump spherical and regular rice-like, respectively. Effects of the introduction of PBLG homopolymer on the average particle diameter of the micelles of PBLG-block-PEG and PEG-b-PBLG-g-PEG and influence of testing temperature on the critical micelle concentration of different copolymers were studied.     

Doubly thermoresponsive brush‐linear‐linear ABC triblock copolymer nanoparticles prepared through dispersion RAFT polymerization

Doubly thermoresponsive ABC brush‐linear‐linear triblock copolymer nanoparticles of poly[poly(ethylene glycol) methyl ether vinylphenyl]‐block‐poly(N‐isopropylacrylamide)‐block‐polystyrene [P(mPEGV)‐b‐PNIPAM‐b‐PS] containing two thermoresponsive blocks of poly[poly(ethylene glycol) methyl ether vinylphenyl] [P(mPEGV)] and poly(N‐isopropylacrylamide) (PNIPAM) are prepared by macro‐RAFT agent mediated dispersion polymerization. The P(mPEGV)‐b‐PNIPAM‐b‐PS nanoparticles exhibit two separate lower critical solution temperatures or phase‐transition temperatures (PTTs) corresponding to the linear PNIPAM block and the brush P(mPEGV) block in water. Upon temperature increasing above the first and then the second PTT, the hydrodynamic diameter (D_h) of the triblock copolymer nanoparticles undergoes an initial shrinkage at the first PTT and the subsequent shrinkage at the second PTT. The effect of the chain length of the PNIPAM block on the thermoresponsive behavior of the triblock copolymer nanoparticles is investigated. It is found that, the longer chains of the thermoresponsive PNIPAM block, the greater contribution on the transmittance change of the aqueous dispersion of the triblock copolymer nanoparticles. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2266–2278     

Novel synthesis of biodegradable poly(lactide-co-ethylene glycol) block copolymers

Biodegradable and amphiphilic diblock copolymers [polylactide-block-poly(ethylene glycol)] and triblock copolymers [polylactide-block-poly(ethylene glycol)-block-polylactide] were synthesized by the anionic ring-opening polymerization of lactides in the presence of poly(ethylene glycol) methyl ether or poly(ethylene glycol) and potassium hexamethyldisilazide as a catalyst. The polymerization in toluene at room temperature was very fast, yielding copolymers of controlled molecular weights and tailored molecular architectures. The chemical structure of the copolymers was investigated with ¹H and ¹³C NMR. The formation of block copolymers was confirmed by ¹³C NMR and differential scanning calorimetry investigations. The monomodal profile of the molecular weight distribution by gel permeation chromatography provided further evidence of block copolymer formation as well as the absence of cyclic species. Additional confirmation of the block copolymers was obtained by the substitution of 2-butanol for poly(ethylene glycol); butyl groups were clearly identified by ¹H NMR as polymer chain end groups. The effects of the copolymer composition and lactide stereochemistry on the copolymer properties were examined. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2235–2245, 2007     

Effect of hydrotropes on the solution behavior of PEO/PPO/PEO block copolymer L62 in aqueous solutions

Effect of hydrotropes viz. sodium benzene sulfonate (NaBS), sodium toluene sulfonate (NaTS) and sodium xylene sulfonate (NaXS) on the micellization, phase behavior and structure of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymer L62 in aqueous solution was studied by surface tension, dye spectral, cloud point and small angle neutron scattering measurements. The addition of hydrotropes increased the critical micelle concentration (CMC) of L62 which appears to be logistic as the added hydrotrope enhances the solubility of PPO moiety (and PEO) making it behave like a more hydrophilic block copolymer that would micellize at high copolymer concentration. Partial phase diagram of L62 in water shows two cloud point (CP) in the concentration range (0-10 wt.%). Addition of hydrotropes shifts the L62 concentration range showing double cloud points at lower side of concentration; sodium xylene sulfonate (NaXS) being more effective. SANS data for L62 in the presence of 0.4 and 0.8 M NaXS at temperatures <30 °C showed unimers which are fully dissolved Gaussian chains. The unimer-to-micelle transition takes place when temperature is increased. It is found that SANS data for L62 in the presence of 0.4 M NaXS (40 and 50 °C) and 0.8 M NaXS (45 and 50 °C) correspond to ellipsoidal structure of micelles.     

New side chain cholesterol-functionalised aliphatic polycarbonate copolymer: synthesis and phase behaviour

A new side cholesterol-functionalised liquid crystal (LC) copolymer based on aliphatic polycarbonate backbone was synthesised. The chemical structures of the block copolymers obtained in this study were characterised with Fourier Transform Infrared Spectroscopy (FT-IR) and Proton Nuclear Magnetic Resonance (¹H NMR) spectra. Their thermal stability and phase behaviours were investigated with thermogravimetric analysis (TGA) measurements, differential scanning calorimetry, and polarising optical microscopy. The molecular organisation in the mesophase was studied by temperature-dependent X-ray diffraction (XRD). As a result, the block copolymer bearing side cholesteryl groups showed a glass transition at 15.8°C and a smectic A (SmA) to isotropic phase transition at 151.3°C on heating cycle. XRD indicated that the block LC copolymer showed an interdigitated molecular arrangement of the mesogenic units within the smectic layers. This partial bilayer structure was similar to the SmA phase formed by polar mesogens.     

Crystallization-induced aggregation of block copolymer micelles: influence of crystallization kinetics on morphology

We present a systematic investigation of the crystallization and aggregation behavior of a poly(1,2-butadiene)-block-poly(ethylene oxide) diblock copolymer (PB-b-PEO) in n-heptane. n-Heptane is a poor solvent for PEO and at 70°C the block copolymer self-assembles into spherical micelles composed of a liquid PEO core and a soluble PB corona. Time- and temperature-dependent light scattering experiments revealed that when crystallization of the PEO cores is induced by cooling, the crystal morphology depends on the crystallization temperature (T _c ): Below 30°C, the high nucleation rate of the PEO core dictates the growth of the crystals by a fast aggregation of the micelles into meander-like (branched) structures due to a depletion of the micelles at the growth front. Above 30°C the nucleation rate is diminished and a relatively small crystal growth rate leads to the formation of twisted lamellae as imaged by scanning force microscopy. All data demonstrate that the formation mechanism of the crystals through micellar aggregation is dictated by two competitive effects, namely, by the nucleation and growth of the PEO core.     

Preparing a functionalized thermoplastic elastomer—bromination and synthesis of poly(p-methylstyrene-co-styrene)-block-poly(ethylene-co-butene)-block-poly(p-methylstyrene-co-styrene)

A poly(p-methylstyrene-co-styrene)-block-poly(ethylene-co-butene)-block-poly(p-methylstyrene-co-styrene) thermoplastic elastomer was prepared via anionic synthesis of poly(p-methylstyrene-co-styrene)-block-polybutadiene-block-poly(p-methylstyrene-co-styrene) followed by a hydrogenation of the polybutadiene midblock. The sequential method used for the synthesis has resulted in a nearly monodispersed polymer with a polydispersity of 1.03. Bromination of such synthesized copolymer was next, conducted using two different methods. In the presence of a FeCl₃ catalyst in CCl₄ solvent, bromination occurred through forming a carbocationic complex to undergo an electrophilic substitution reaction on the aromatic rings of the end blocks. Nevertheless, the bromination occurred exclusively on the p-methyl groups of the end blocks when conducted in cyclohexane using photoinitiated free radicals. The microstructure of the brominated molecules were analyzed using ¹H-NMR and ¹³C-NMR, and bromination efficiencies of 48 and 44% have been attained from the two methods, respectively. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4108–4116, 1999     

Structure and ordering kinetics of micelles in triblock copolymer solutions in selective solvents

We have used small-angle x-ray scattering (SAXS), and small-angle neutron scattering (SANS) to study the micelle structure of a polystyrene-block-poly(ethene-co-butene)-block-polystyrene triblock copolymer in dilute - semidilute solutions in solvents selective for either the outer styrene block (dioxane) or for the middle block (heptane or tetradecane). Measurements of equilibrium structure factors showed that micelles were formed in both types of selective solvents. In the case of dioxane, the micelles are isolated whereas in the case of heptane or tetradecane, a bridged micellar structure may be formed at higher copolymer concentrations. In both cases we observed an ordered cubic structure of insoluble domains (micellar cores) at high concentrations (> 8 %). The micellar scattering function was fit to the Percus-Yevick interacting hard-sphere model. The temperature dependence of the core radius, the hard-sphere interaction radius and the volume fraction of hard spheres were obtained. We also used synchrotron-based time-resolved SAXS to examine the kinetics of ordering of the micelles on a cubic lattice for many different temperature jumps into the ordered cubic phase starting from the disordered micellar fluid phase in different solvents at different concentrations. The time evolution of the structure changes was determined by fitting the data with Gaussians to describe the structure factor of the ordered Bragg peaks and the Percus-Yevick structure factor was used to describe the micellar fluid. The time dependence of the peak intensities and widths as well as of the micellar parameters will be presented. The results showing the kinetics of the transformation from the fluid to the ordered phase were analyzed using the Mehl-Johnson-Avrami theory of nucleation.     

Ring-Opening Polymerization of the Cyclic Ester Amide Derived from Adipic Anhydride and 1-Amino-6-hexanol in Melt and in Solution

The ring-opening polymerization (ROP) of the cyclic ester amide (cEA) 5 (systematic name, 1-oxa-8-aza-cyclotetradecane-9,14-dione) - prepared from adipic anhydride and 1-amino-6-hexanol - in the melt at 165 °C and in solution at 100 °C and 120 °C with Bu₂Sn(OMe)₂ or Ti(OBu)₄ as initiator yields the alternating poly(ester amide) (PEA) 4 (systematic name, poly(5-(6-oxyhexylcarbamoyl)-pentanoate) with regular microstructure. Kinetic studies for different monomer-to-initiator ratios, different reaction media, initiators and temperatures reveal that the ROP is a first-order reaction with respect to the monomer. Under suitable polymerization conditions termination and transfer reactions are suppressed. The elementary chain growth reaction proceeds by a coordination insertion mechanism in analogy to the polymerization of lactones. By using monohydroxy- and bishydroxy-functional telechelic poly(ethylene oxide) and Sn(octoate)₂ as the initiating system poly(ethylene oxide)-block-poly(ester amide)s and poly(ester amide)-block-poly(ethylene oxide)-block-poly(ester amide)s are obtained. The poly(ester amide) 4 is a semicrystalline material with a melting point of 140 °C, the block copolymers are phase separated systems showing two melting points characteristic for the respective homopolymers.     

Aggregation Behavior of Poly(ethylene glycol)-block-poly (γ-benzyl L-glutamate)-graft-poly(ethylene glycol) Copolymer and its Blends with Poly(γ-benzyl L-glutamate) Homopolymer in Mixed Solvents

Poly(ethylene glycol)-block-poly(γ-benzyl L-glutamate)-graft-poly(ethylene glycol) (PEG-b-PBLG-g-PEG) copolymer was synthesized by the ester exchange reaction of PBLG-block-PEG copolymer with mPEG. The self-association behaviors of PEG-b-PBLG-g-PEG and its blends with PBLG homopolymer in the mixtures of ethanol and dimethylformamide (DMF) were investigated by transmission electron microscopy (TEM), dynamic light scattering (DLS), and viscometry. Effects of the introduction of PBLG homopolymer, the grafting ratio, and the DMF content on the self-association behaviors of PEG-b-PBLG-g-PEG copolymer in the mixtures of ethanol and DMF were mainly researched. It was revealed that PEG-b-PBLG-g-PEG copolymer could self-assemble to form polymeric micelles with a core-shell structure in various shapes from different preparation conditions. The critical micelle concentration (CMC) and the average particle diameter of the micelles formed by PEG-b-PBLG-g-PEG copolymer in the mixed solvents also changed with different preparation conditions.