Pd/ZnO和Ag/ZnO复合纳米粒子的SPS和XPS研究

用焙烧前驱物碱式碳酸锌的方法制备了ZnO纳米粒子，采用光还原沉积贵金属的方法分别得到了质量分数为0.5％的Pd/ZnO和Ag/ZnO复合纳米粒子，并利用XRD、TEM、XPS和SPS等测试技术对样品进行表征.初步探讨了贵金属在ZnO纳米粒子表面形成原子簇的原因及沉积贵金属对ZnO纳米粒子表面光电压信号的影响.以光催化氧化气相正庚烷为模型反应，考察了沉积贵金属对ZnO纳米粒子光催化活性的影响，并探讨了光催化活性有所提高的内在原因.结果表明， ZnO纳米粒子沉积贵金属后，其表面光电压信号明显下降，而光催化活性却大大地提高，这说明可以通过表面光电压谱的测试来初步的评估纳米粒子的光催化活性，即粒子的表面光电压信号越弱，其光催化活性越高.     

Pd/ZnO和Ag/ZnO复合纳米粒子的制备、表征及光催化活性

 用焙烧前驱物碱式碳酸锌的方法制备了ZnO纳米粒子，采用光还原沉积贵金属的方法制备了Pd／ZnO和Ag／ZnO复合纳米粒子，并利用ICP，XRD，TEM和XPS等测试技术对样品进行了表征，初步探讨了贵金属在ZnO纳米粒子表面形成原子簇的原因．以光催化氧化气相正庚烷为模型反应，考察了样品的光催化活性以及贵金属沉积量对催化剂活性的影响．结果表明：沉积适量的贵金属，ZnO纳米粒子光催化剂的活性大幅度提高．同时，深入探讨了表面沉积贵金属的ZnO纳米粒子光催化剂活性有所提高的内在原因．     

ZnO纳米粒子的表面光电压谱和光催化性能

采用焙烧前驱物碱式碳酸锌的方法制备了不同粒径的ZnO纳米粒子，而用粒径 最小的作为光催化剂，通过光还原过程分别得了贵金属质量分数为0.5%和0.75%的 Pd/ZnO或Ag/ZnO复合纳米粒子。利用XRD，TEM，XPS，SPS和EFISPS等测试技术对样 品进行了表征，并通过光催化氧化气相正庚烷评估了样品的光催化活性，考察了微 晶尺寸和贵金属Pd或Ag的沉积对ZnO纳米粒子表面光电压信号以及光催化活性的影 响，探讨了样品表面光电压谱与其光催化活性的关系，说明了可以通过表面光电压 谱的测试来初步地评估纳米粒子的光催化活性。结果表明：随着ZnO纳米微晶尺寸 的减小，其SPS信号强度逐渐变弱，而光催化活性逐渐升高；沉积适量的贵金属Pd 或Ag后，ZnO纳米粒子的SPS信号强度明显下降，而其光催化活性却有所升高。此外 ，对ZnO纳米粒子光催化剂的失活机理进行了分析。     

Relationships of surface oxygen vacancies with photoluminescence and photocatalytic performance of ZnO nanoparticles

ZnO is one of important semiconductor materials,applied widely in the fields such as the cerams, piezo-electric sensors, catalysts and luminescence apparatus.ZnO nanoparticles not only are ideal materials to pre-pare newly electronic apparatus[1], but als…     

Ag／TiO2复合纳米催化剂的制备和表征及其光催化活性

 采用光还原沉积贵金属法，制备了Ag／TiO2复合纳米催化剂．通过调节溶液的pH值控制TiO2表面负载银的形貌，利用AAS，XRD，TEM和XPS等手段对样品进行了表征．以苯胺氧化为模型反应，考察了Ag／TiO2复合纳米催化剂样品的光催化活性以及银沉积量和沉积形貌对催化剂活性的影响．结果表明，通过调控光还原沉积条件，可在平均粒径为24nm左右的TiO2颗粒上获得3nm左右均匀分散的银粒子；在TiO2上沉积适量的具有较高分散度的金属Ag，能有效提高TiO2对苯胺氧化反应的光催化活性．     

Photocatalytic oxidation of organic dyes with nanostructured zinc dioxide modified with silver metals

Silver-doped nano-ZnO samples with different Ag loadings were prepared by a one-spot solvothermal method. The structure, physico-chemical and optical properties of the products are characterized by using X-ray diffraction (XRD), transmission electron microscope (TEM), energy dispersive X-ray analysis (EDS), diffuse reflectance spectroscopy (DRS) and photoluminescence spectra (PL). The photocatalytic activity of the as-prepared samples was examined by using photocatalytic oxidation of methyl orange (MO) as a model reaction, and the effects of the noble metal content on the photocatalytic activity were investigated. The results indicated that the photocatalytic activity of ZnO nanoparticles can be greatly improved by depositing appropriate amount of noble metal on their surface as electron scavengers. In addition, a key mechanism was proposed in order to account for the enhanced activity. The enhancement for the photocatalytic activities can be attributed to the interaction between Ag particles and ZnO, which made Ag particles act as electron traps to effectively separate the excited electron-hole pairs.     

Influence of the preparation conditions of Pd‐ZrO2 and AuPd‐ZrO2 nanoparticle–decorated functionalised MWCNTs: Electron spectroscopy study aided with the QUASES

The Pd, AuPd, and ZrO₂ nanoparticle–decorated functionalised multiwalled carbon nanotubes (f‐MWCNTs) were reported as efficient catalysts of formic acid (FA) electro‐oxidation. Different preparation conditions influence their chemical and structural properties analysed by X‐ray photoelectron spectroscopy aided with the quantitative analysis of surfaces by electron spectroscopy. Different reduction procedures such as NaBH₄, a polyol microwave‐assisted method (PMWA), and a high pressure microwave reactor (HPMWR) were applied for decorating ZrO₂/f‐MWCNTs with Pd and AuPd nanoparticles. The ZrO₂ nanoparticles are attached through oxygen groups to the surface of f‐MWCNTs. In NaBH₄ and HPMWR procedures, Pd nanoparticles precipitate predominantly on ZrO₂ of nearly nominal stoichiometry, whereas in PMWA procedure, Pd and AuPd nanoparticles precipitate predominantly on the surface of f‐MWCNTs, bridging with oxygen groups and ZrO_x (x < 2) and leading to Pd‐O‐Zr phase formation. Strong reducing procedures (NaBH₄ and FA) led to smaller Pd nanoparticle size, Pd oxide content, and PdO_x overlayer thickness in contrary to weak reduction procedures (HPMWR and PMWA). The highest content of Pd‐O‐Zr phase appeared for Pd predominant precipitation on ZrO₂ nanoparticles (HPMWR) in contrary to Pd and AuPd predominant precipitation on surface of f‐MWCNTs (NaBH₄ ~ FA > PMWA). Larger content of Pd‐O‐Zr phase in AuPd‐decorated ZrO₂/f‐MWCNTs in contrary to Pd‐decorated sample (PMWA) could be justified by different electronic properties of nanoparticles. The FA treatment of Pd and AuPd‐ZrO₂/f‐MWCNTs samples provided decreasing Pd oxide content, overlayer thickness, nanoparticle size, increasing nanoparticle surface coverage and density, amount of Pd‐O‐Zr, what results from reduction of oxygen groups bridging with Pd and ZrO_x nanoparticles, also through Pd‐O‐Zr phase.     

Superior Photostability and Photocatalytic Activity of ZnO Nanoparticles Coated with Ultrathin TiO2 Layers through Atomic‐Layer Deposition

Atomic‐layer deposition (ALD) is a thin‐film growth technology that allows for conformal growth of thin films with atomic‐level control over their thickness. Although ALD is successful in the semiconductor manufacturing industry, its feasibility for nanoparticle coating has been less explored. Herein, the ALD coating of TiO₂ layers on ZnO nanoparticles by employing a specialized rotary reactor is demonstrated. The photocatalytic activity and photostability of ZnO nanoparticles coated with TiO₂ layers by ALD and chemical methods were examined by the photodegradation of Rhodamine B dye under UV irradiation. Even though the photocatalytic activity of the presynthesized ZnO nanoparticles is higher than that of commercial P25 TiO₂ nanoparticles, their activity tends to decline due to severe photocorrosion. The chemically synthesized TiO₂ coating layer on ZnO resulted in severely declined photoactivity despite the improved photostability. However, ultrathin and conformal ALD TiO₂ coatings (≈0.75–1.5 nm) on ZnO improved its photostability without degradation of photocatalytic activity. Surprisingly, the photostability is comparable to that of pure TiO₂, and the photocatalytic activity to that of pure ZnO.     

Hydrothermal oxidation synthesis of rod‐like ZnO and the influence of oxygen vacancy on photocatalysis

Rod‐like ZnO nanoparticles (NPs ) were synthesized from zinc powder by a simple hydrothermal oxidation method. The presence of acetylacetone could promote the oxidation reaction of Zn and the formation of hexagonal nanorods. Then, the as‐prepared samples were annealed in N₂ , O₂ , and air atmosphere at 550°C for 2 h to control the number of oxygen vacancies in the samples. The samples were characterized by X‐ray diffraction, scanning electron microscopy, X‐ray photoelectron spectroscopy, and UV –vis spectroscopy. The correlation between the oxygen vacancies and the photocatalytic activity was investigated. The results reveal that the annealing process alters the samples’ bandgap and number of the oxygen vacancies, thereby improving the photocatalytic activity. The enhancement of photodegradation efficiency arising from the appropriate content of oxygen vacancies is discussed.     

掺Sn的纳米TiO2表面光致电荷分离及光催化活性

采用溶胶-凝胶法制备了不同掺Sn量的TiO₂纳米粒子, 主要利用表面光电压谱(SPS)和光致发光光谱(PL)对样品进行了表征, 并通过光催化降解苯酚实验来评估样品活性. 重点考察了热处理温度和掺Sn量对样品表面光生载流子的分离及光催化活性的影响, 并探讨了Sn使TiO₂纳米粒子改性的机制. 结果表明, 在适当温度处理下, 适量Sn的掺入能够有效促进TiO₂纳米粒子表面光生载流子的分离, 以至于使其光催化活性得到显著提高.     

Effects of surface oxygen vacancies on photophysical and photochemical processes of Zn-doped TiO2 nanoparticles and their relationships

In this paper, TiO(2) nanoparticles doped with different amounts of Zn were prepared by a sol-gel method and were mainly characterized by means of X-ray photoelectron spectroscopy (XPS), photoluminescence (PL), and surface photovoltage spectrum (SPS). The effects of surface oxygen vacancies (SOVs) of Zn-doped TiO(2) nanoparticles on photophysical and photocatalytic processes were investigated along with their inherent relationships. The results show that the SOVs easily bind photoinduced electrons to further give rise to PL signals. The SOVs can result in an interesting sub-band SPS response near the band edge in the TiO(2) sample consisting of much anatase and little rutile, except for an obvious band-to-band SPS response. Moreover, the intensities of PL and SPS signals of TiO(2), as well as the photocatalytic activity for degrading phenol solution, can be enhanced by doping an appropriate amount of Zn. These improvements are mainly attributed to the increase in the SOV amount. It can be suggested that the SOVs should play an important role during the processes of PL, surface photovoltage, and photocatalytic reactions, and, for the as-prepared TiO(2) samples doped with different amounts of Zn by thermal treatment at 550 degrees C, the larger the SOV amount, the stronger the PL and SPS signal, and the higher the photocatalytic activity.     

Selectivity in the Ligand Functionalization of Photocatalytic Metal Oxide Nanoparticles for Phase Transfer and Self-Assembly Applications

The functionalization of photocatalytic metal oxide nanoparticles of TiO₂, ZnO, WO₃ and CuO with amine-terminated (oleylamine) and thiol-terminated (dodecane-1-thiol) alkyl-chain ligands was studied under ambient conditions. A high selectivity was observed in the binding specificity of a ligand towards nanoparticles of these different oxides. It was observed that oleylamine binds stably to only TiO₂ and WO₃, whereas dodecane-1-thiol binds stably only to ZnO and CuO. Similarly, polar-to-nonpolar solvent phase transfer of TiO₂ and WO₃ nanoparticles could be achieved by using oleylamine, but not dodecane-1-thiol, whereas the opposite holds for ZnO and CuO. The surface chemistry of ligand-functionalized nanoparticles was probed by attenuated total reflectance (ATR)-FTIR spectroscopy, which enabled the occupation of the ligands at the active sites to be elucidated. The photostability of the ligands on the nanoparticle surface was determined by the photocatalytic self-cleaning properties of the material. Although TiO₂ and WO₃ degrade the ligands within 24 h under both UV and visible light, ligands on ZnO and CuO remain unaffected. The gathered insights are also highly relevant from an application point of view. As an example, because the ligand-functionalized nanoparticles are hydrophobic in nature, they can be self-assembled at the air-water interface to give nanoparticle films with demonstrated photocatalytic as well as anti-fogging properties.     

ZnO和TiO2纳米粒子的光致发光性能及其与光催化活性的关系

采用沉淀法和溶胶-凝胶法制备了ZnO和TiO2及掺Zn2+的TiO2纳米粒子,用XRD和荧光光谱(FS)等手段对样品进行了表征,重点探讨了样品光致发光机制及与光催化活性的关系.结果表明,ZnO和TiO2样品在大于带隙能的光激发下均表现出明显的FS信号,热处理温度升高,FS信号强度下降,并且二者的FS信号类似,这可能与二者具有类似的电子能带结构有关,同时也说明FS信号主要源于表面氧空位以及吸附氧物种等引起的激子或表面态能级.掺杂Zn2+使TiO2纳米粒子FS信号增强,这主要与表面氧空位和缺陷等量增加有关;此外,在光催化氧化苯酚实验中,样品光催化活性与其FS信号强度顺序一致,即FS信号越强,活性越高.这是由于在光致发光过程中,FS信号主要源于表面氧空位,而在光催化反应中,表面氧空位有利于氧化反应进行.     

掺Sn的纳米TiO2表面光生束缚激子的验证及其特性

采用溶胶-凝胶法制备了不同掺杂Sn的TiO₂纳米粒子, 并主要利用表面光电压谱(SPS)和电场诱导表面光电压谱(EFISPS)对样品进行了表征, 重点探讨了焙烧温度和掺Sn量对TiO₂光生电荷性质的影响. 同时揭示了样品结构与表面光生束缚激子的关系及其特性. 结果表明: 与束缚激子相关的光伏响应只在含有金红石相的TiO₂样品中出现, 且在混晶相中表现得更加显著. 掺杂适量Sn不仅提高了纳米TiO₂的与带带跃迁相关的SPS响应强度, 同时也使与束缚激子相关的SPS响应明显增强.     

The preparation and characterization of La doped TiO2 nanoparticles and their photocatalytic activity

In this paper, pure and La doped TiO₂ nanoparticles with different La content were prepared by a sol-gel process using Ti (OC₄H₉)₄ as raw material, and also were characterized by XRD, TG-DTA, TEM, XPS, DRS and Photoluminescence (PL) spectra. We mainly investigated the effects of calcining temperature and La content on the properties and the photocatalytic activity for degrading phenol of as-prepared TiO₂ samples, and also discussed the relationships between PL spectra and photocatalytic activity as well as the mechanisms of La doping on TiO₂ phase transformation. The results showed that La³⁺ did not enter into the crystal lattices of TiO₂ and was uniformly dispersed onto TiO₂ as the form of La₂O₃ particles with small size, which possibly made La dopant have a great inhibition on TiO₂ phase transformation; La dopant did not give rise to a new PL signal, but it could improve the intensity of PL spectra with a appropriate La content, which was possibly attributed to the increase in the content of surface oxygen vacancies and defects after doping La; La doped TiO₂ nanoparticles calcined at 600°C exhibited higher photocatalytic activity, indicating that 600°C was an appropriate calcination temperature. The order of photocatalytic activity of La doped TiO₂ samples with different La content was as following: 1>1.5>3>0.5>5>0 mol%, which was the same as the order of their PL intensity, namely, the stronger the PL intensity, the higher the photocatalytic activity, demonstrating that there were certain relationships between PL spectra and photocatalytic activity. This could be explained by the points that PL spectra mainly resulted from surface oxygen vacancies and defects during the process of PL, while surface oxygen vacancies and defects could be favorable in capturing the photoinduced electrons during the process of photocatalytic reactions.     

Au纳米粒子负载的ZnO空心球复合材料的光生电荷转移行为及光催化活性

通过简单的两步法合成了不同负载量的Au/ZnO空心球。采用扫描电子显微镜(SEM),X射线衍射(XRD),X射线光电子能谱(XPS)及紫外-可见漫反射光谱(UV-Vis DRS)对样品的形貌、结构、组成和晶相等进行一系列的表征。以罗丹明B (RhB)为目标降解物,探究了Au/ZnO空心球的光催化活性。结果表明,适量Au修饰的ZnO光催化剂在混合光下20 min内对RhB的降解率达到73%。利用表面光电压谱(SPS)和瞬态光电压(TPV)技术,探讨了Au修饰后对ZnO光诱导电荷转移行为与光催化性能之间的关系。结果表明,混合光照下Au/ZnO空心球光降解性能的提高主要归因于作为电子受体的Au纳米粒子与ZnO之间形成的强的电子相互作用。适量Au纳米粒子的负载能够提高ZnO空心球中光生载流子的分离效率,相应地延长载流子的传输时间,增加光生电荷的寿命,从而促进其光催化活性的提高。     

Enhanced photocatalytic activity of ZnO nanoparticles by surface modification with KF using thermal shock method

ZnO nanoparticles were modified with KF using thermal shock method at various temperatures in order to improve the photocatalytic activity of ZnO under both UVA and visible light irradiation. The influences of KF-modification on the crystal structure, morphology, UV–visible absorption, specific surface area as well as surface structure of ZnO were respectively characterized by XRD, FE-SEM, UV–Visible diffuse reflectance, N₂ adsorption and XPS spectroscopy. The photocatalytic activity was evaluated via the degradation of methylene blue under UVA irradiation. According to the results, the thermal shock process with KF did not modify the structure, the particle size and the optical properties of ZnO nanoparticles but successfully increase their UVA and visible light induced photocatalytic activity. This enhancement of activity may be attributed to the increase of surface hydroxyl groups and zinc vacancies of modified ZnO samples.     

镧系离子掺杂TiO2的制备及其对咪唑降解反应的光催化活性

 以TiCl4和镧系元素的氯化盐溶液为前驱体,采用溶胶-凝胶法制备了不同含量镧系离子掺杂的TiO2光催化剂,用X射线衍射(XRD)、 光致发光光谱(PLS)、 表面光电压谱(SPS)和X射线光电子能谱(XPS)对催化剂进行了表征. XRD结果表明,样品为锐钛矿和金红石的混晶相,镧系离子未进入到TiO2晶格中. PLS和SPS测定结果表明,随着掺杂离子的不同和掺杂含量的不同,样品的谱强度呈现有规律的变化. 在紫外光照射下,以咪唑为目标降解物比较了催化剂的光催化活性. 结果表明,适当含量的镧系离子掺杂可有效促进TiO2表面光生载流子的分离,从而显著提高其光催化活性.     

One pot synthesis of Ag nanoparticle modified ZnO microspheres in ethylene glycol medium and their enhanced photocatalytic performance

Ag nanoparticles (NPs) modified ZnO microspheres (Ag/ZnO microspheres) were prepared by a facile one pot strategy in ethylene glycol (EG) medium. The EG played two important roles in the synthesis: it could act as a reaction media for the formation of ZnO and reduce Ag⁺ to Ag⁰. A series of the characterizations indicated the successful combination of Ag NPs with ZnO microspheres. It was shown that Ag modification could greatly enhance the photocatalytic efficiency of ZnO microspheres by taking the photodegradation of Rhodamine B as a model reaction. With appropriate ratio of Ag and ZnO, Ag/ZnO microspheres showed the better photocatalytic performance than commercial Degussa P-25 TiO₂. Photoluminescence and surface photovoltage spectra demonstrated that Ag modification could effectively inhibit the recombination of the photoinduced electron and holes of ZnO. This is responsible for the higher photocatalytic activity of Ag/ZnO composites.     

Ag/ZnO heterostructure nanocrystals: synthesis, characterization, and photocatalysis

A high yield of the dimer-type heterostructure of Ag/ZnO nanocrystals with different Ag contents is successfully prepared through a simple solvothermal method in the absence of surfactants. The samples are characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, UV-vis spectroscopy, and IR spectroscopy. The results show that all samples are composed of metallic Ag and ZnO; Ag nanoparticles locate on the surface of ZnO nanorods; the binding energy of Ag 3d(5/2) for the Ag/ZnO sample with a Ag content of 5.0 atom % shifts remarkably to the lower binding energy compared with the corresponding value of pure metallic Ag because of the interaction between Ag and ZnO nanocrystals; the concentration of oxygen vacancy for the as-synthesized samples varies with the increasing Ag content, and the Ag/ZnO sample with a Ag content of 5.0 atom % has the largest density of oxygen vacancy. In addition, the relationship between their structure and photocatalytic property is investigated in detail. It is found that the photocatalytic property is closely related to its structure, such as heterostructure, oxygen defect, and crystallinity. The presence of metallic Ag nanoparticles and oxygen vacancy on the surface of ZnO nanorods promotes the separation of photogenerated electron-hole pairs and thus enhances the photocatalytic activity.