Determination of Cr(VI) by Catalytic Adsorptive Stripping Voltammetry with Application of Nitrilotriacetic Acid as a Masking Agent

A selective and sensitive method for determination of traces of Cr(VI) in the presence of a large excess of Cr(III) by differential pulse catalytic adsorptive stripping voltammetry is presented. For minimization of Cr(III) interference nitrilotriacetic acid was used as a masking agent. The determinations were performed in a flow system. The calibration plot was linear from 1×10⁻¹⁰ to 1×10⁻⁸ mol L⁻¹ for accumulation time 60 s. The relative standard deviation for 3×10⁻⁹ mol L⁻¹ Cr(VI) was 4.1% (n=5). The detection limit for an accumulation time of 60 s was 4×10⁻¹¹ mol L⁻¹. The influence of common foreign ions is also presented. The performance of the method was verified by analysis of certified reference material for Cr(VI) and comparing the results of analyses of natural water samples with those obtained by another accepted electrochemical method.     

A comparison study of adsorptive transfer voltammetry and solution phase voltammetry for the determination of caffeic acid

This study reports a comparison of adsorptive transfer and solution phase voltammetric methods for the study of caffeic acid. For this purpose, a platform was prepared by the modification of glassy carbon electrodes (GCEs) with MWCNTs and samarium nanoparticles (SmNPs) by means of an ultrasonic bath. The surface morphology of the platform was characterized using SEM, EDX and XRD. The adsorptive transfer voltammetric method was based on the adsorption of caffeic acid (CFA) at the surface of the modified electrode by keeping it into a solution of CFA. Afterwards, the modified electrode was transferred with the adsorbed species in a cell containing only 0.1 mol L⁻¹ phosphate buffer solution (PBS) for the analysis. The current response of CFA was found to be linear over a concentration from 5.0 × 10⁻¹⁰ mol L⁻¹ to 1.0 × 10⁻⁷ mol L⁻¹. The values of the limit of detection (LOD) and limit of quantification (LOQ) were 2.0 × 10⁻¹⁰ mol L⁻¹ and 6.67 × 10⁻¹⁰ mol L⁻¹, respectively. The adsorptive transfer method using the modified electrode (SmNPs/MWCNTs/GCE) has successfully been applied to food samples for determining CFA. The solution phase voltammetry was carried out by dipping the electrode into a voltammetric cell containing CFA. The plot of peak currents was linear over the concentration range of 5.0 × 10⁻⁹ mol L⁻¹ –8.0 × 10⁻⁸ mol L⁻¹. The values of LOD and LOQ were 2.0 × 10⁻⁹ mol L⁻¹ and 6.67 × 10⁻⁹ mol L⁻¹ for CFA using a classical solution phase voltammetry at the proposed platform. It was shown that the LOD obtained at adsorptive transfer voltammetry was 10-fold lower when compared to classical solution phase voltammetry.     

Novel Potentiometric Solid-contact Electrode for the Determination of Fe2+ Ions via MWCNTs-Gemifloxacin Composite

A novel electrode was fabricated for the quantitation of Fe²⁺ ion. It was based on the covalent attachment of the gemifloxacin molecule (the recognition element) to the surface of MWCNTs to be incorporated as an electroactive material. Linear response of Fe²⁺ ions was found in the concentration range of 1×10⁻² mol L⁻¹ to 1×10⁻⁸ mol L⁻¹ with a Nernstian slope of 30.37 ±0.3 (mV/decade) and attained a stable response within 5 s. The sensor exhibited LOD value of 4.8×10⁻⁹ mol L⁻¹. It was applied in the monitoring of Fe²⁺ concentration in multi-vitamins tablets, tap water and milk samples with acceptable recovery ranged from 94.00 % to 102.00 %.     

Application of Double Deposition and Stripping Steps System for Minimization of Interferences of Peaks’ Overlapping in Anodic Stripping Voltammetry

An anodic stripping voltammetric procedure for the determination of bismuth in the presence of excess of Cu²⁺ ions at two ex situ plated gold film electrodes was described. The procedure is based on utilization of two deposition and two stripping steps system. The presented procedure ensures increasing the sensitivity of Bi³⁺ determination and minimization of interferences related to peaks’ overlapping. The calibration graph for bismuth determination was linear from 2.5×10⁻⁹ to 2×10⁻⁸ mol L⁻¹ for deposition time of 300 s at both working electrodes while detection limit was 7.7×10⁻¹⁰ mol L⁻¹.     

Amperometric detection of indapamide on glassy carbon electrode

This work describes the development of a fast, precise and reliable voltammetric method for the quantification of indapamide, an orally active diuretic sulfonamide used for hypertensive treatment. This compound acts inhibiting sodium reabsorption and increasing the elimination of water. This characteristic was responsible for its banishment by the International Olympic Committee since 1999. The study begins by finding an adequate potential range (−0.20 to 0.30 V) to avoid poisoning the working glassy carbon electrode (GCE) in phosphate buffer 0.10 mol L⁻¹ (pH=12.0). Utilizing flow injection analysis, linear responses between 2.0 × 10⁻⁶ mol L⁻¹ to 2.5 × 10⁻⁵ mol L⁻¹ of indapamide (R²=0.995), and detection limit (LOD) 3.0 × 10⁻⁷ mol L⁻¹ were obtained. This method was applied for the quantification of indapamide in tablets and in synthetic urine. The same flow system was used for the analysis of commercial drugs and the response obtained corresponded to 98 % of the concentration indicated on the drug label. These tablets were also analyzed by high performance liquid chromatography (HPLC), obtaining a recovery of 103 % and LOD 4.0 × 10⁻⁷ mol L⁻¹. The velocity of analysis using flow methods compares advantageously to the classical chromatographic methods. For synthetic urine, linear responses were obtained in samples spiked in the region from 5.0 × 10⁻⁶ mol L⁻¹ to 30 × 10⁻⁶ mol L⁻¹ (R²=0.991) and LOD 3.0 × 10⁻⁷ mol L⁻¹.     

Fluorescence “turn-on” chemosensor for the selective detection of zinc ion based on Schiff-base derivative

N,N′-phenylenebis(salicylideaminato) (L) has been used to detect trace amounts of zinc ion in acetonitrile–water solution by fluorescence spectroscopy. The fluorescent probe undergoes fluorescent emission intensity enhancement upon binding to zinc ions in MeCN/H₂O (1:1, v/v) solution. The fluorescence enhancement of L is attributed to the 1:1 complex formation between L and Zn(II), which has been utilized as the basis for selective detection of Zn(II). The linear response range for Zn(II) covers a concentration range of 1.6 × 10^?7 to 1.0 × 10^?5 mol/L, and the detection limit is 1.5 × 10^?7 mol/L. The fluorescent probe exhibits high selectivity over other common metal ions, and the proposed fluorescent sensor was applied to determine zinc in water samples and waste water.     

Amperometric Tyrosinase Biosensor Based on Carbon Black Paste Electrode for Sensitive Detection of Catechol in Environmental Samples

In this work, a renewable tyrosinase-based biosensor was developed for the detection of catechol, using a carbon black paste electrode, without any mediator. The effect of pH, type of electrolyte, and amount of tyrosinase enzyme were explored for optimum analytical performance. The best-performing biosensor in amperometric experiments at potential −0.2 V vs. Ag/AgCl (3 mol L⁻¹ KCl) was obtained using a 0.1 mol L⁻¹ phosphate buffer solution (pH 7.0) as electrolyte. Under optimized conditions, the proposed biosensor had two concentration linear ranges from 5.0×10⁻⁹ to 4.8×10⁻⁸ and from 4.8×10⁻⁸ to 8.5×10⁻⁶ mol L⁻¹ and a limit of detection of 1.5×10⁻⁹ mol L⁻¹. The apparent Michaelis-Menten constant ( ) was calculated by the amperometric method, and the obtained value was 1.2×10⁻⁵ mol L⁻¹ whose result was similar when compared with other studies previously. The biosensor was applied in river water samples, and the results were very satisfactory, with recoveries near 100 %. In addition, the response of this biosensor for different compounds, taking into account their molecular structures was investigated and the results obtained showed no interference with the response potential of catechol. The electrochemical biosensor developed in this work can be considered highly advantageous because it does not require the use of a mediator (direct detection) for electrochemical response, and also because it is based on a low-cost materials that can be used with success to immobilise other enzymes and/or biomolecules.     

Square Wave‐Anodic Stripping Voltammetric Determination of Copper at a Bismuth Film/Glassy Carbon Electrode Using 3‐[(2‐Mercapto‐Vinyl)‐Hydrazono]‐ 1,3‐Dihydro‐Indol‐2‐One

This study reports a highly sensitive electrochemical sensor based on Bi film modified glassy carbon electrode (BiF/GCE) for total determination and speciation trace concentrations of copper(II) ions in environmental water samples. Square wave‐adsorptive anodic stripping voltammetric (SW‐ASV) experiment was performed for monitoring selective accumulation of copper(II) with reagent 3‐[(2‐mercapto‐vinyl)‐hydrazono]‐1,3‐dihydro‐indol‐2‐one (MHDI) at pH 9–10. The mechanism of the electrode reaction of Cu²⁺‐MHDI complex was safely assigned. The sensor exhibited a wide linear range (3.22×10⁻⁹–2.0×10⁻⁷ mol L⁻¹) with lower limits of detection (LOD) and quantitation (LOQ) of 9.6×1⁻¹⁰ and 3.22×10⁻⁹ mol L⁻¹, respectively (R²=0.9993). The proposed sensor exhibited interference from active metal ions e. g. Cd, Hg. The performance of the proposed method was compared successfully with most of the reported methods and comparable efficiencies were obtained. The analytical utility of the proposed SW‐ASV method has been successfully validated for trace analysis of copper(II) in environmental water samples. The method offers a precise, accurate approach with good reproducibility, robustness, ruggedness, and cost effectiveness.     

Voltammetric Method for the Simultaneous Determination of Melatonin and Pyridoxine in Dietary Supplements Using a Cathodically Pretreated Boron‐doped Diamond Electrode

The simultaneous voltammetric determination of melatonin (MT) and pyridoxine (PY) has been carried out at a cathodically pretreated boron‐doped diamond electrode. By using cyclic voltammetry, a separation of the oxidation peak potentials of both compounds present in mixture was about 0.47 V in Britton‐Robinson buffer, pH 2. The results obtained by square‐wave voltammetry allowed a method to be developed for determination of MT and PY simultaneously in the ranges 1–100 μg mL⁻¹ (4.3×10⁻⁶–4.3×10⁻⁴ mol L⁻¹) and 10–175 μg mL⁻¹ (4.9×10⁻⁵–8.5×10⁻⁴ mol L⁻¹), with detection limits of 0.14 μg mL⁻¹ (6.0×10⁻⁷ mol L⁻¹) and 1.35 μg mL⁻¹ (6.6×10⁻⁶ mol L⁻¹), respectively. The proposed method was successfully to the dietary supplements samples containing these compounds for health‐caring purposes.     

A new Approach for the Voltammetric Sensing of the Phytoestrogen Genistein at a Non-modified Boron-doped Diamond Electrode

An effective electrochemical sensor was constructed using an unmodified boron-doped diamond electrode for determination of genistein by square-wave voltammetry. Cyclic voltammetric investigations of genistein with HClO₄ solution indicated that irreversible behavior, adsorption-controlled and well-defined two oxidation peaks at about +0.92 (P_A1) & +1.27 V (P_A2). pH, as well as supporting electrolytes, are important in genistein oxidations. Quantification analyses of genistein were conducted using its two oxidation peaks. Using optimized experiments as well as instrumental conditions, the current response with genistein was proportionately linear in the concentrations range of 0.1 to 50.0 μg mL⁻¹ (3.7×10⁻⁷−1.9×10⁻⁴ mol L⁻¹), by the detection limit of 0.023 μg mL⁻¹ (8.5×10⁻⁸ mol L⁻¹) for P_A1 and 0.028 μg mL⁻¹ (1.1×10⁻⁷ mol L⁻¹) for P_A2 in 0.1 mol L⁻¹ HClO₄ solution (in the open circuit condition at 30 s accumulation time). Ultimately, the developed method was effectively applied to detect genistein in model human urine samples by using its second oxidation peak (P_A2).     

Spectroscopic analysis of pindolol irradiated in the solid state

Pindolol ((2RS)-(1-(1H-indol-4-iloxy)-3- [(1-metyloetylo)amino]-2-propanol) in substantia was exposed to ionising radiation emitted by high energy electrons from an accelerator, in the standard sterilisation dose of 25 kGy and in higher doses from the range 50–400 kGy. The effects of irradiation were checked by spectrometric methods (UV, MS, FT-IR, EPR) and hyphenated methods (HPLC-MS) and the results were referred to those obtained for non-irradiated sample. EPR results indicated the presence of free radicals in irradiated samples, in the amount of 1.36 × 10¹⁶ spin g^?1 for 25 kGy and 3.70×10¹⁶ spin g^?1 for 400 kGy. The loss of pindolol content determined by HPLC was 1.34% after irradiation with 400 kGy, while the radiolytic yield of the total radiolysis for this dose of irradiation was 2.69×10⁷ mol J^?1. By means of HPLC-MS it was possible to separate and identify one product of radiolytic decomposition, which probably is 2-((R)-3-(1H-indol-4-yloxy)-2-hydroxypropylamino)propan-1-ol formed upon oxidation. In the range of sterilisation doses (25–50 kGy), pindolol was found to show high radiochemical stability and would probably be safely sterilised by the standard dose of 25 kGy.      

3D‐printed Microfluidic Device Based on Cotton Threads for Amperometric Estimation of Antioxidants in Wine Samples

The present work describes the evaluation of microfluidic electroanalytical devices constructed by a 3D printer using ABS (acrylonitrile butadiene styrene) polymer combined with cotton threads as microchannels. Screen‐printed carbon electrodes (SPCEs) were used as electrochemical detector for amperometric determination of gallic and caffeic acid in wine samples. Using optimal experimental conditions (flow rate of 0.71 μL s⁻¹, applied potential of +0.30 V and volume of injection of 2.0 μL) the proposed method presented a linear response for a concentration range of 5.0×10⁻⁶ to 1.0×10⁻³ mol L⁻¹. The detection limits for gallic and caffeic acid were found to 1.5×10⁻⁶ mol L⁻¹ and 8.0×10⁻⁷ mol L⁻¹, respectively, with a sample throughput of 43 h⁻¹. The achieved results are in agreement with those found using the official Folin‐Ciocaulteu method.     

Application of Dipon, (1,4,8,11-Tetraazacyclotetradecane-4,11-bis(methylphosphonic acid) as Selective Complexing Agent for Determination of Copper(II)

A new macrocyclic ligand, 1,4,8,11-tetraazacyclotetradecane-1,8-bis(methylphosphonic acid)(dipon), is selective complexing agent for copper(II) over other transition metal ions. The ligand was tested for analytical applications of copper(II) determination. Spectrophotometric determination under optimal experimental conditions (?log [H⁺]= 5.5, c _L≈ 5 × 10^?4 mol L^?1, λ= 310 nm) is valid in dynamic range (5–200)× 10^?6 mol L^?1 with detection limit 2.2 × 10^?6 mol L^?1, i.e. 0.14 μg ml^?1. Volumetric determination of copper(II) with standardized dipon solution was used for copper(II) determination at micromolar concentration level without any necessity to sequester interfering metal ions. A sharp end point of titration was detected by UV/VIS spectrophotometry. Both methods were tested on artificial and real samples (spiked mineral water, alloys) and gave satisfactory results without any systematic error. The advantage of both methods is their simplicity, rapidity and no sensitivity to the presence of other metal ions.     

MDMA Electrochemical Determination and Behavior at Carbon Screen-printed Electrodes: Cheap Tools for Forensic Applications

This article describes a method that uses Carbon Screen-printed Electrodes (C-SPEs) to detect 3,4 – methylenedioxyamphetamine (MDMA) by Linear Sweep Voltammetry in aqueous medium. Major parameters of this technique were evaluated aiming improve the method sensibility. Amines interference were conducted in order to verify disturbs at the MDMA response. The method obtained a linear response from 1×10⁻⁵ mol L⁻¹ to 1×10⁻⁴ mol L⁻¹ with linear correlation coefficient of 0.996, Amperometric Sensitivity (AS) of 0.025 A×mol⁻¹ L, Limit of Detection (LOD) of 1,83×10⁻⁶ mol L⁻¹, and Limit of Quantification (LOQ) of 6,11×10⁻⁶ mol L⁻¹. The method applicability, reproducibility and reproducibility were carried over inter/intra days tests and its application on seized samples.     

Graphdiyne and Ionic Liquid Composite Modified Gold Electrode for Sensitive Voltammetric Analysis of Rutin

It is significant to develop a point-of-care testing (POCT) method for rapid detection of medicinal molecules. In this paper, a graphdiyne (GDY)-ionic liquid (IL) composite was prepared via one-step facile ultrasound preparation process and then modified on gold (Au) electrode surface by simple casting method. Scanning electron microscopy and transmission electron microscopy were used to characterize the morphology of GDY-IL composite. Cyclic voltammetric results proved that GDY-IL composite on the electrode surface could effectively improve electron transfer rate, which meant that GDY-IL composite had high conductivity with big surface area. Finally, the modified electrode exhibited excellent performances for rutin detection with wider linear range (8.0×10⁻⁹ mol L⁻¹–2.0×10⁻⁶ mol L⁻¹ and 2.0×10⁻⁶ mol L⁻¹–1.5×10⁻⁴ mol L⁻¹) and lower detection limit (2.7 nmol L⁻¹, 3S₀/S). The Nafion/GDY-IL/Au electrode showed good sensitivity and high selectivity, which was satisfactory in analytical application to real samples. Therefore, the GDY-IL composite modified electrode has the potential applications in the POCT for electrochemical analysis of various medicinal molecules.     

A new PVC matrix membrane sensor for determination of praseodymium(III) ion based on bis(salicylaldehyde)thiocarbohydrazone as an ion carrier

The sufficient amounts of bis(salicylaldehyde) thiocarbohydrazone (STCH) as a lipophilic selective element (3%, w/w), sodium nitrobenzene (NB) as a plasticizer (64%, w/w), tetraphenyl borate (NaTPB) as an anionic additive (3%, w/w), and poly vinyl chloride (PVC) as a polymeric matrix (30%, w/w) was employed to form a PVC membrane of a new Pr³⁺ ions selective sensor to apply as an indicator electrode in analytical applications. The best electrode response was observed in the slope (19.5 ± 0.7 mV per decade) over a wide concentrations from lower (1.0 × 10^?6 mol L^–1) to higher (1.0 × 10^?2 mol L^–1) of Pr³⁺ ion solution with a detection limit of 8.5 × 10^–7 mol L^–1. This electrode showed the fast response time about 10 second for praseodymium ion concentration range of 1.0 × 10^–6 to 1.0 × 10^–2 mol L^–1, in the pH range of 2.3–7.9. The matched potential method was applied to study the selectivity of electrode toward Pr³⁺ ions in comparison with many common cations. The results showed the negligible disturbance of all other cations on the proposed praseodymium(III) electrode. The making sensor has been employed successfully as an indicator electrode in the potentiometric titration of praseodymium(III) solution with EDTA at pH 6.0. Moreover the applicability of the sensor was studied in determination of Pr³⁺ ion in mixtures of different ions.     

Enhanced mass transfer during solid–liquid extraction of gamma-irradiated red beetroot

The exposure to gamma-irradiation pretreatment increases cell wall permeabilization, resulting in loss of turgor pressure, which led to the increase of extractability of betanin from red beetroot. The degree of extraction of betanin was investigated using gamma irradiation as a pretreatment prior to the solid–liquid extraction process and compared with control beetroot samples. The beetroot subjected to different doses of gamma irradiation (2.5, 5.0, 7.5, 10.0 kGy) and control was dipped in an acetic acid medium (1% v/v) to extract the betanin. The diffusion coefficients for betanin as well as ionic component were estimated considering Fickian diffusion. The results indicated an increase in the diffusion coefficient of betanin (0.302×10⁻⁹–0.463×10⁻⁹ m²/s) and ionic component (0.248×10⁻⁹–0.453×10⁻⁹ m²/s) as the dose rate increased (from 2.5 to 10.0 kGy). The degradation constant was found to increase (0.050–0.079 min⁻¹) with an increase gamma-irradiation doses (2.5–10.0 kGy), indicating lower stability of the betanin as compared to control sample at 65 °C.     

Behavior of cadmium(II) in irradiated aqueous solutions

Behavior of cadmium(II) in aqueous solutions irradiated by accelerated electrons was studied. A concentration of 8.8 × 10⁻⁴ mol L⁻¹ of cadmium dissolved from Cd(NO₃)₂ requires dose of 15 kGy to be effectively removed from the system containing 1 × 10⁻² mol L⁻¹ of HCOOK as a scavenger of OH radicals. The positive effect of deaeration with N₂O or N₂ was observed in the range of lower doses. The addition of solid modifiers (bentonite, active carbon, zeolite, Cu₂O, NiO, TiO₂ and CuO) reduced the effectivity of radiation removal of cadmium. Product of irradiation is CdCO₃. On the contrary, in the system with cadmium dissolved from CdCl₂ radiation reduction takes place. Systems contained organic complexants (ethylene diamine tetraacetic acid–EDTA, citric acid) were also studied. The solutions of Cd(NO₃)₂ containing initial concentration 2.37 × 10⁻⁴ mol L⁻¹ of Cd^II were mixed with 3 × 10⁻⁴ mol L⁻¹ EDTA. In this system the efficient degradation proceeds up to 90% at a dose of 45 kGy with addition of 5 × 10⁻³ mol L⁻¹ carbonate (pH 10.5). The product of irradiation is CdCO₃. The presence of 1 × 10⁻² mol L⁻¹ of HCOOK in the solution is necessary for radiation removal of cadmium complexed with citric acid (1 × 10⁻³ mol L⁻¹) at pH 8. With increasing concentration of HCOOK (up to 5 × 10⁻² mol L⁻¹) decreases the pH value necessary for the radiation induced precipitation of cadmium. The best result was obtained in the system containing zeolite as a solid modifier.     

Photoionization of Ru(bpy)32+ ions in aqueous solutions containing sodium dodecyl sulfate. Influence of ion binding

Sodium dodecyl sulfate (SDS) augments the yield of biphotonic ionization of tris-2,2′-bipyridyl ruthenium(II) ions (3.75×10⁻⁵ mol dm⁻³) in aqueous solution at room temperature to different extents at two different concentration ranges: by a factor 4 at [SDS] just below the critical concentration for precipitation (4.5×10⁻⁴ mol dm⁻³) and by a factor 1.4 at [SDS] above the critical micellar concentration (8×10⁻³ mol dm⁻³). The augmentation of the photoionization yield is explained in terms of ion binding, i.e. electrostatic interaction between Ru(bpy)₃²⁺ ions and dodecyl sulfate ions which results in a partial charge neutralization with the consequence of a decrease in the ionization potential.     

Complexing Polymer Films in The Preparation of Modified Electrodes for Detection of Metal Ions

Summary: The complexing properties of poly (3-(pyrrol-1-yl)propylmalonic acid) (poly1) and poly(N,N′-ethylenebis[N-[(3-(pyrrole-1-yl)propyl) carbamoyl) methyl]-glycine (poly2) coated electrodes (C|poly1 and C|poly2) towards Cu(II), Pb(II), Hg(II) and Cd(II) cations using the open circuit chemical preconcentration-anodic stripping technique were studied. Sorption process of metal cations onto complexing surfaces was readily investigated through the combination of a chemical pre-concentration-anodic stripping technique with a Langmuir isotherm model. The modified electrodes were used for the voltammetric determination of Cu(II), Pb(II), Hg(II) and Cd(II) ions, giving low detection limits for Cu(II) (5 × 10⁻⁹ mol L⁻¹) and Pb(II) (5 × 10⁻¹⁰ mol L⁻¹). The ability of the modified electrodes to analyze Cu(II) ions in natural sample has been demonstrated by the analysis of a tap water sample. The results of the preconcentration process under competitive conditions clearly shows that the selectivity of complexing molecular electrode materials can be subtly tuned upon playing on the accumulation time, polymer thickness and/or memory effect of the binding polymers, opening up new avenues towards evolutive and efficient smart sensing materials.