Amperometric detection of indapamide on glassy carbon electrode

This work describes the development of a fast, precise and reliable voltammetric method for the quantification of indapamide, an orally active diuretic sulfonamide used for hypertensive treatment. This compound acts inhibiting sodium reabsorption and increasing the elimination of water. This characteristic was responsible for its banishment by the International Olympic Committee since 1999. The study begins by finding an adequate potential range (−0.20 to 0.30 V) to avoid poisoning the working glassy carbon electrode (GCE) in phosphate buffer 0.10 mol L⁻¹ (pH=12.0). Utilizing flow injection analysis, linear responses between 2.0 × 10⁻⁶ mol L⁻¹ to 2.5 × 10⁻⁵ mol L⁻¹ of indapamide (R²=0.995), and detection limit (LOD) 3.0 × 10⁻⁷ mol L⁻¹ were obtained. This method was applied for the quantification of indapamide in tablets and in synthetic urine. The same flow system was used for the analysis of commercial drugs and the response obtained corresponded to 98 % of the concentration indicated on the drug label. These tablets were also analyzed by high performance liquid chromatography (HPLC), obtaining a recovery of 103 % and LOD 4.0 × 10⁻⁷ mol L⁻¹. The velocity of analysis using flow methods compares advantageously to the classical chromatographic methods. For synthetic urine, linear responses were obtained in samples spiked in the region from 5.0 × 10⁻⁶ mol L⁻¹ to 30 × 10⁻⁶ mol L⁻¹ (R²=0.991) and LOD 3.0 × 10⁻⁷ mol L⁻¹.     

Redox Properties and in Vivo Magnetic Resonance Imaging of Cyclodextrin-Polynitroxides Contrast Agents

This paper reports the synthesis, characterization and in vivo application of water-soluble supramolecular contrast agents (Mw: 5–5.6 kDa) for MRI obtained from β-cyclodextrin functionalized with different kinds of nitroxide radicals, both with piperidine structure ( CD2 and CD3 ) and with pyrrolidine structure ( CD4 and CD5 ). As to the stability of the radicals in presence of ascorbic acid, CD4 and CD5 have low second order kinetic constants (≤0.05 M⁻¹ s⁻¹) compared to CD2 (3.5 M⁻¹ s⁻¹) and CD3 (0.73 M⁻¹ s⁻¹). Relaxivity (r₁) measurements on compounds CD3 - CD5 were carried out at different magnetic field strength (0.7, 3, 7 and 9.4 T). At 0.7 T, r₁ values comprised between 1.5 mM⁻¹ s⁻¹ and 1.9 mM⁻¹ s⁻¹ were found while a significant reduction was observed at higher fields (r₁≈0.6-0.9 mM⁻¹ s⁻¹ at 9.4 T). Tests in vitro on HEK293 human embryonic kidney cells, L929 mouse fibroblasts and U87 glioblastoma cells indicated that all compounds were non-cytotoxic at concentrations below 1 μmol mL⁻¹. MRI in vivo was carried out at 9.4 T on glioma-bearing rats using the compounds CD3 - CD5 . The experiments showed a good lowering of T₁ relaxation in tumor with a retention of the contrast for at least 60 mins confirming improved stability also in vivo conditions.     

Amperometric Folic Acid Quantification Using a Supramolecular Tetraruthenated Nickel Porphyrin µ‐Peroxo‐Bridged Matrix Modified Electrode Associated to Batch Injection Analysis

A supramolecular Nickel (II) porphyrin complex containing four pyridyl‐bis(2,2′‐bipyridyl)chloro ruthenium meso substituents was submitted to successive voltammetric cycles in high alkaline media to produce a supramolecular matrix with Nickel centers linked by µ‐peroxo bridges, producing a highly stable thin film able to act as redox mediator for electrocatalytic oxidation of folic acid. The characterization of electrode surface material was performed by Scanning Electron Microscopy and Electrochemical Impedance Spectroscopy. The modified electrode was inserted into a batch injection electrochemical cell used for the rapid and precise quantification of folic acid in pharmaceutical products. The favorable hydrodynamic conditions provided by amperometry‐BIA association allowed a very high throughput with good linear range (1 to 200 µmol L^?1) and low detection limit (7.37×10^?7 mol L^?1). The electrochemical method was applied to the quantification of folic acid in different tablet samples. The results were comparable with values indicated by the manufacturer and those found using high HPLC according to the Brazilian Pharmacopoeia; commercial samples were submitted to a procedure in order to remove lactose of tablets, since carbohydrates act as interfering species. This procedure together with the electrochemical method showed to be simple, rapid, efficient and an appropriate alternative for quantifying this compound in real samples.     

Detection of explosives on the surface of banknotes by Raman hyperspectral imaging and independent component analysis

The aim of this study was to develop a methodology using Raman hyperspectral imaging and chemometric methods for identification of pre- and post-blast explosive residues on banknote surfaces. The explosives studied were of military, commercial and propellant uses. After the acquisition of the hyperspectral imaging, independent component analysis (ICA) was applied to extract the pure spectra and the distribution of the corresponding image constituents. The performance of the methodology was evaluated by the explained variance and the lack of fit of the models, by comparing the ICA recovered spectra with the reference spectra using correlation coefficients and by the presence of rotational ambiguity in the ICA solutions. The methodology was applied to forensic samples to solve an automated teller machine explosion case. Independent component analysis proved to be a suitable method of resolving curves, achieving equivalent performance with the multivariate curve resolution with alternating least squares (MCR-ALS) method. At low concentrations, MCR-ALS presents some limitations, as it did not provide the correct solution. The detection limit of the methodology presented in this study was 50 μg cm⁻².     

Product Markovian Quantization of a Diffusion Process with Applications to Finance

Methodology and Computing in Applied Probability - We introduce a new methodology for the quantization of the Euler scheme for a d-dimensional diffusion process. This method is based on a Markovian...     

History of accelerator neutrino beams

Neutrino beams obtained from proton accelerators were first operated in 1962. Since then, neutrino beams have been intensively used in particle physics and evolved in many different ways. We describe the characteristics of various neutrino beams, relating them to the historical development of the physics studies and discoveries. We also discuss some of the ideas still under consideration for future neutrino beams.

     

Enantioselective Synthesis of Phenylpropanetriols

The four stereomer 1-(4-hydroxy-3-methoxy)-phenyl-1,2,3-propanetriols were obtained in about 30% yields starting from ferulic acid by a synthesis based on osmium catalyzed asymmetric dihydroxylation.     

Suppressing the environmental dependence of the open‐circuit voltage in inverted polymer solar cells through a radical polymer anodic modifier

Developing stable, readily‐synthesized, and solution‐processable transparent conducting polymers for interfacial modifying layers in organic photovoltaic (OPV) devices has become of great importance. Here, the radical polymer, poly(2,2,6,6‐tetramethylpiperidinyloxy methacrylate (PTMA), is shown to not affect the absorption of the well‐studied poly(3‐hexylthiophene) (P3HT) and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) active layer when incorporated into inverted OPV devices, as it is highly transparent in the visible spectrum due to the non‐conjugated nature of the PTMA backbone. The inclusion of this radical polymer as an anode‐modifying layer enhanced the open‐circuit voltage and short‐circuit current density values over devices that did not contain an anodic modifier. Importantly, devices fabricated with the PTMA interlayer had performance metrics that were time‐independent over the entire course of multiples days of testing after exposing the OPV devices to ambient conditions. Furthermore, these high performance values were independent of the metal used as the top electrode contact in the inverted OPV devices. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 311–316