M+(12-crown-4) supramolecular cations (M+ = Na+, K+, Rb+, and NH4+) within Ni(2-thioxo-1,3-dithiole-4,5-dithiolate)2 molecular conductor

Monovalent cations (M+ = Na+, K+, Rb+, and NH4+) and 12-crown-4 were assembled to new supramolecular cation (SC+) structures of the M+(12-crown-4)n (n = 1 and 2), which were incorporated into the electrically conducting Ni(dmit)2 salts (dmit = 2-thioxo-1,3-dithiole-4,5-dithiolate). The Na+, K+, and Rb+ salts are isostructural with a stoichiometry of the M+(12-crown-4)2[Ni(dmit)2]4, while the NH4+ salt has a stoichiometry of NH4+(12-crown-4)[Ni(dmit)2]3(CH3CN)2. The electrical conductivities of the Na+, K+, Rb+, and NH4+ salts at room temperature are 7.87, 4.46, 0.78, and 0.14 S cm-1, respectively, with a semiconducting temperature dependence. The SC+ structures of the Na+, K+, and Rb+ salts have an ion-capturing sandwich-type cavity of M+(12-crown-4)2, in which the M+ ion is coordinated by eight oxygen atoms of the two 12-crown-4 molecules. On the other hand, the NH4+ ion is coordinated by four oxygen atoms of the 12-crown-4 molecule. Judging from the M(+)-O distances, thermal parameters of oxygen atoms, and vibration spectra, the thermal fluctuation of the Na+(12-crown-4)2 structure is larger than those of K+(12-crown-4)2 and Rb+(12-crown-4)2. The SC+ unit with the larger alkali metal cation gave a stress to the Ni(dmit)2 column, and the SC+ structure changed the pi-pi overlap mode and electrically conducting behavior.     

Na^+/CaO催化剂上的甲烷氧化偶联

研究了不同碱金属离子对CaO的促进作用,发现以Na~+的添加效果最好。在此基础上,研究了不同含钠化合物对CaO的促进作用,并用脉冲反应技术研究Na~+/CaO催化剂表面氧物种的特性及其作用。CaO表面上存在非选择性氧化的氧物种。Na~+对CaO的修饰作用是抑制非选择性氧化。当表面上的非选择性氧化的氧物种消耗后,体相的晶格氧会向表面迁移,以补充消耗掉的表面氧物种。消耗掉的表面氧物种也可由气相氧补充。CH_4脉冲和混合气脉冲说明仅靠[Na~+O~-]中心不足以使甲烷转化成C_2产物,必须有气相氧的参与才能使甲烷转化成C_2产物。     

SnO2基固溶体用于甲烷深度氧化：X射线衍射外推法测定 SnO2晶格容量

CH4和 CO是两种主要的温室效应气体和空气污染物,催化氧化是最有效的消除 CH4和 CO的方法.研发不含贵金属的金属氧化物催化剂或者减少催化剂中贵金属用量为该领域研究热点. SnO2是一种重要的宽禁带 n型半导体材料,广泛应用于气敏器件、锂离子电池以及光电设备. SnO2表面富含活泼的缺位氧且具有良好的热稳定性,因此其在催化方面的性能近年来逐渐受到人们关注.在过去的5年中,本团队深入研究了 SnO2材料在空气污染治理和绿色能源生产等领域的应用及其催化性质.发现通过其它阳离子如 Fe3+, Cr3+, Ta5+, Ce4+和Nb5+等的掺杂,替换晶格中部分 Sn4+,形成金红石型 SnO2固溶体结构,显著提高了催化剂氧物种的流动性、活性和催化剂本身的热稳定性.固溶体材料是一类重要的催化剂,受到广泛关注.一个典型的例子是铈锆固溶体,其作为储氧材料已广泛应用于汽车尾气净化器.形成固溶体结构后,氧化铈的储氧能力和热稳定性得到显著提高.为有效形成固溶体,两个阳离子需要具有相似的离子半径和电负性.以往,人们基于结构中金属阳离子和氧阴离子的离子半径提出了容忍因子的判别方法,以此来判断固溶体是否能有效形成及所生成固溶体的稳定性.我们在前期工作中,以 Sn-Nb固溶体为例,提出了简单的X射线衍射(XRD)外推法来计算固溶体晶格容量,即形成稳定固溶体时客体阳离子取代主体晶格阳离子的最大值.作为延续工作,本文采用共沉淀法制备了一系列 Sn/M (M = Mn, Zr, Ti, Pb)摩尔比为9/1的 SnO2基催化剂,并用于 CH4和 CO催化氧化.结果表明, Mn3+, Zr4+, Ti4+和 Pb4+均可以掺杂进四方金红石型 SnO2晶格中,形成稳定的固溶体结构.其中 Sn-Mn-O固溶体表现出最高活性.为了深入研究 Mn2O3在 SnO2中的晶格容量及最优催化剂配比,采用共沉淀法制备了一系列不同 Sn/Mn摩尔比的样品,采用 XRD, N2-BET, H2-TPR, SEM和XPS等手段对其物理化学性能进行了表征,并考察了对 CH4的催化氧化性能.通过 XRD外推法测定了 Mn3+离子在 SnO2中的晶格容量为0.135 g Mn2O3/g SnO2,相当于 Sn/Mn摩尔比为79/21.这表明形成稳定的固溶体后, SnO2晶格中最多只有21% Sn4+可以被 Mn3+替代;当 Mn3+含量超过晶格容量时,过量的 Mn3+在催化剂表面形成 Mn2O3,对催化剂活性不利.类似于 Sn-Nb-O固溶体,在 Sn-Mn-O催化剂体系中亦观察到明显的晶格容量效应.纯相的 Sn-Mn-O固溶体比含过量 Mn2O3晶相的 Sn-Mn-O催化剂具有更高活性.     

O-atom transport catalysis by atomic cations in the gas phase: reduction of N2O by CO

Atomic cations (26), M+, have been shown to lie within a thermodynamic window for O-atom transport catalysis of the reduction of N2O by CO and have been checked for catalytic activity at room temperature with kinetic measurements using an inductively-coupled plasma/selected-ion flow tube (ICP/SIFT) tandem mass spectrometer. Only 10 of these 26 atomic cations were seen to be catalytic: Ca+, Fe+, Ge+, Sr+, Ba+, Os+, Ir+, Pt+, Eu+, and Yb+. The remaining 16 cations that lie in the thermodynamic window (Cr+, Mn+, Co+, Ni+, Cu+, Se+, Mo+, Ru+, Rh+, Sn+, Te+, Re+, Pb+, Bi+, Tm+, and Lu+) react too slowly at room temperature either in the formation of MO+ or in its reduction by CO. Many of these reactions are known to be spin forbidden and a few actually may lie outside the thermodynamic window. A new measure of efficiency is introduced for catalytic cycles that allows the discrimination between catalytic cations on the basis of the efficiencies of the two legs of the catalytic cycle. Also, a potential-energy landscape is computed for the reduction of N2O by CO catalyzed by Fe+(6D) that vividly illustrates the operation of an ionic catalyst.     

Partial oxidation of propylene catalyzed by VO3 clusters: a density functional theory study

Density functional theory (DFT) calculations are carried out to investigate partial oxidation of propylene over neutral VO 3 clusters. C=C bond cleavage products CH 3CHO + VO 2CH 2 and HCHO + VO 2CHCH 3 can be formed overall barrierlessly from the reaction of propylene with VO 3 at room temperature. Formation of hydrogen transfer products H 2O + VO 2C 3H 4, CH 2=CHCHO + VO 2H 2, CH 3CH 2CHO + VO 2, and (CH 3) 2CO + VO 2 is subject to tiny (0.01 eV) or small (0.06 eV, 0.19 eV) overall free energy barriers, although their formation is thermodynamically more favorable than the formation of C=C bond cleavage products. These DFT results are in agreement with recent experimental observations. VO 3 regeneration processes at room temperature are also investigated through reaction of O 2 with the CC bond cleavage products VO 2CH 2 and VO 2CHCH 3. The following barrierless reaction channels are identified: VO 2CH 2 + O 2 --> VO 3 + CH 2O; VO 2CH 2 + O 2 --> VO 3C + H 2O, VO 3C + O 2 --> VO 3 + CO 2; VO 2CHCH 3 + O 2 --> VO 3 + CH 3CHO; and VO 2CHCH 3 + O 2 --> VO 3C + CH 3OH, VO 3C + O 2 --> VO 3 + CO 2. The kinetically most favorable reaction products are CH 3CHO, H 2O, and CO 2 in the gas phase model catalytic cycles. The results parallel similar behavior in the selective oxidation of propylene over condensed phase V 2O 5/SiO 2 catalysts.     

Nitric oxide as an electron donor, an atom donor, an atom acceptor, and a ligand in reactions with atomic transition-metal and main-group cations in the gas phase

The room-temperature reactions of nitric oxide with 46 atomic cations have been surveyed systematically across and down the periodic table using an inductively-coupled plasma/selected-ion flow tube (ICP/SIFT) tandem mass spectrometer. Rate coefficients and product distributions were measured for the reactions of first-row cations from K+ to Se+, of second-row cations from Rb+ to Te+ (excluding Tc+), and of third-row cations from Cs+ to Bi+. Reactions both first and second order in NO were identified. The observed bimolecular reactions were thermodynamically controlled. Efficient exothermic electron transfer was observed with Zn+, As+, Se+, Au+, and Hg+. Bimolecular O-atom transfer was observed with Sc+, Ti+, Y+, Zr+, Nb+, La+, Hf+, Ta+, and W+. Of the remaining 32 atomic ions, all but 8 react in novel termolecular reactions second order in NO to produce NO+ and the metal-nitrosyl molecule, the metal-monoxide cation and nitrous oxide, and/or the metal-nitrosyl cation. K+, Rb+, Cs+, Ga+, In+, Tl+, Pb+, and Bi+ are totally unreactive. Further reactions with NO produce the dioxide cations CaO2+, TiO2+, VO2+, CrO2+, SrO2+, ZrO2+, NbO2+, RuO2+, BaO2+, HfO2+, TaO2+, WO2+, ReO2+, and OsO2+ and the still higher order oxides WO3+, ReO3+, and ReO4+. NO ligation was observed in the formation of CaO+(NO), ScO+(NO), TiO+(NO), VO+(NO)(1-3), VO2+(NO)(1-3), SrO+(NO), SrO2+(NO)1,2, RuO+(NO)(1-3), RuO2+(NO)1,2, OsO+(NO)(1-3), and IrO+(NO). The reported reactivities for bare atomic ions provide a benchmark for reactivities of ligated atomic ions and point to possible second-order NO chemistry in biometallic and metal-surface environments leading to the conversion of NO to N2O and the production of metal-nitrosyl molecules.     

Role of surface defects in activation of O2 and N2O on ZrO2 and yttrium-stabilized ZrO2

The relationship between the structure of both yttrium-stabilized zirconia (YSZ) and ZrO2 catalysts and their ability to activate N2O and O2 is studied by determination of catalytic properties and characterization with TPD, SEM, and XRD. Furthermore, the role of oxygen species formed via dissociation of either O2 or N2O in catalytic partial oxidation of methane (CPOM) is determined. N2O can be activated at both structural defects (e.g., Zr cations located at corners) and intrinsic oxygen vacancies (Zr'(Zr)-V(O)**Zr'(Zr)) and forms two types of oxygen species (alpha-O and beta-O) on the surface, respectively. In contrast, molecular oxygen gives rise to only one type of oxygen species (beta-O), that is, surface lattice oxygen. This type of oxygen species can be extracted by reaction with methane, forming the intrinsic oxygen vacancies again during CPOM. However, the structural defects are not active for oxygen activation during CPOM. Doping ZrO2 with Y2O3 significantly decreases the number of structural defects via replacement of Zr4+ cations by Y3+ cations, located at corners, steps, kinks, and edges of the crystallites. Calcination at higher temperatures results in less structural defects due to both increasing crystallite size as well as transformation to more regular shaped crystallites. High temperature calcinations also increase the activity of YSZ in CPOM. This is attributed to the increase in the exposition of low index planes, especially those (111) with the lowest surface energy and the highest coordination numbers, induced by the thermal treatment.     

激光促进甲醇氧化偶联表面反应的规律

用沉淀法制备了Ｌｉ３ＰＯ４、ＢｉＰＯ４和Ｌｉ３ＰＯ４、ＢｉＰＯ４三种固体表面材料,并用ＸＲＤ、ＩＲ、ＴＰＤ和激光促进表面反应（ＬＳＳＲ）等技术研究了这些固体表面上甲醇氧化偶联生成乙二醇的反应规律。实验结果表明：甲醇在固体材料表面的Ｐ＝９键上产生Ｃ－Ｈ端的分子态吸附,在表面的Ｌｅｗｉｓ酸位（金属离子）上产生解离态吸附。Ｌｉ３ＰＯ４和ＢｉＰＯ４的相互作用可促进甲醇在固体表面上的分子态吸附而抑制解离态吸     

Ni2(OCH3)2/SiO2催化剂上CO2和CH3 OH的吸附和反应性能

采用表面改性和离子交换相结合的方法制备了Ni2(OCH3)2/SiO2负载型双核金属甲氧基配合物催化剂,利用红外光谱(IR)、程序升温脱附(TPD)、程序升温表面反应(TPSR)和微反技术考察了催化剂的表面结构以及CO2和CH3OH的化学吸附和反应性能.结果表明:Ni2(OCH3)2/SiO2中Ni2+与载体SiO2表面O2-以双齿配位形式键合,甲氧基以桥基形式联结双金属离子形成双核物种Ni2(OCH3)2;CO2在催化剂表面存在甲氧碳酸酯基物种和桥式两种吸附态,CH3OH则只有一种分子吸附态;在100～200℃条件下,CO2和CH3OH在催化剂上的反应产物主要是DMC和H2O;根据反应结果,讨论了催化反应机理.     

Selective catalytic reduction of NO by propane over CoO(x)/Al2O3: an investigation of the surface reactions using in situ infrared spectroscopy

The partial oxidation of propane and the mechanism of the selective catalytic reduction (SCR) of NO by C3H8 over CoO(x)/Al2O3 catalysts were investigated using in situ infrared spectroscopy. Emphases are placed on the formation and reactivity of surface oxygenates during the SCR reaction. The SCR reaction starts with partial oxidation of propane to adsorbed acetate and formate. Impregnation of cobalt onto alumina greatly enhanced this reaction. The as-formed acetate acts as an efficient reductant for NO reduction. Surface nitrates (nitrites) are also reactive to propane and to oxygenates generated from C3H8 + O2 reaction. Surface -NCO species are formed over CoO(x)/Al2O3 catalysts. These nitrogen containing organic species are believed to be the direct intermediates in the final formation of N2. On the basis of these investigations, a proposed reaction mechanism explains the formation and roles of all intermediates detected by IR spectroscopy in this study.     

Thioether complexes of palladium(II) and platinum(II) as artificial peptidases. residue-selective peptide cleavage by a palladium(II) complex

We report the synthesis and characterization of perchlorate salts containing the following three novel complex cations each with a bidentate thioether ligand: binuclear cis-[Pt(CH3SCH2CH2CH2SCH3)(mu-OH)]22+, mononuclear cis-[Pt(CH3SCH2CH2CH2SCH3)(H2O)2]2+, and mononuclear cis-[Pd(CH3SCH2CH2CH2SCH3)(H2O)2]2+. Despite their analogous compositions, the mononuclear Pt(II) and Pd(II) complexes differ in the selectivity with which they promote the hydrolysis of polypeptides. The complex cis-[Pt(CH3SCH2CH2CH2SCH3)(H2O)2]2+ promotes slow but selective cleavage of Met-Pro peptide bonds at pH 2.0. The selectivity of the complex cis-[Pd(CH3SCH2CH2CH2SCH3)(H2O)2]2+ is pH-dependent. At pH 2.0, this Pd(II) complex promotes residue-selective hydrolysis of the X-Y bond in X-Y-Met and X-Y-His sequences; the rate is enhanced when residue Y is proline. At pH 7.0, this kinetic preference becomes sequence-selective in that the Pd(II) complex exclusively cleaves the X-Pro bond in X-Pro-Met and X-Pro-His sequences. The enhanced reactivity of the X-Pro amide group is attributed to the high basicity of its carbonyl oxygen atom. Binding of the metal(II) atom enhances the electrophilicity of the carbonyl carbon atom and promotes nucleophilic attack by a solvent water molecule. The bidentate thioether ligand disfavors the formation of hydrolytically unreactive complexes, allowing the Pd(II) complex to promote the cleavage reaction.     

Effect of metal ions (Li+, Na+, K+, Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+) and water coordination on the structure of glycine and zwitterionic glycine

Interactions between metal ions and amino acids are common both in solution and in the gas phase. Here, the effect of metal ions and water on the structure of glycine is examined. The effect of metal ions (Li+, Na+, K+, Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+) and water on structures of Gly.Mn+(H2O)m and GlyZwitt.Mn+(H2O)m (m = 0, 2, 5) complexes have been determined theoretically by employing the hybrid B3LYP exchange-correlation functional and using extended basis sets. Selected calculations were carried out also by means of CBS-QB3 model chemistry. The interaction enthalpies, entropies, and Gibbs energies of eight complexes Gly.Mn+ (Mn+ = Li+, Na+, K+, Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+) were determined at the B3LYP density functional level of theory. The computed Gibbs energies DeltaG degrees are negative and span a rather broad energy interval (from -90 to -1100 kJ mol(-1)), meaning that the ions studied form strong complexes. The largest interaction Gibbs energy (-1076 kJ mol(-1)) was computed for the NiGly2+ complex. Calculations of the molecular structure and relative stability of the Gly.Mn+(H2O)m and GlyZwitt.Mn+(H2O)m (Mn+ = Li+, Na+, K+, Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+; m = 0, 2, and 5) systems indicate that in the complexes with monovalent metal cations the most stable species are the NO coordinated metal cations in non-zwitterionic glycine. Divalent cations Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+ prefer coordination via the OO bifurcated bonds of the zwitterionic glycine. Stepwise addition of two and five water molecules leads to considerable changes in the relative stability of the hydrated species. Addition of two water molecules at the metal ion in both Gly.Mn+ and GlyZwitt.Mn+ complexes reduces the relative stability of metallic complexes of glycine. For Mn+ = Li+ or Na+, the addition of five water molecules does not change the relative order of stability. In the Gly.K+ complex, the solvation shell of water molecules around K+ ion has, because of the larger size of the potassium cation, a different structure with a reduced number of hydrogen-bonded contacts. This results in a net preference (by 10.3 kJ mol(-1)) of the GlyZwitt.K+H2O5 system. Addition of five water molecules to the glycine complexes containing divalent cations Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+ results in a net preference for non-zwitterionic glycine species. The computed relative Gibbs energies are quite high (-10 to -38 kJ mol(-1)), and the NO coordination is preferred in the Gly.Mn+(H2O)5 (Mn+ = Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+) complexes over the OO coordination.     

Carbon disulfide reactions with atomic transition-metal and main-group cations: gas-phase room-temperature kinetics and periodicities in reactivity

The reactions of 46 atomic-metal cations with CS2 have been investigated at room temperature using an inductively-coupled plasma/selected-ion flow tube (ICP/SIFT) tandem mass spectrometer. Rate coefficients and products were measured for the reactions of fourth-period atomic ions from K+ to Se+, of fifth-period atomic ions from Rb+ to Te+ (excluding Tc+), and of sixth-period atomic ions from Cs+ to Bi+. Primary reaction channels were observed leading to S-atom transfer, CS2 addition and, with Hg+, electron transfer. S-atom transfer appears to be thermodynamically controlled and occurs exclusively, and with unit efficiency, in the reactions with most early transition-metal cations (Sc+, Ti+, Y+, Zr+, Nb+, La+, Hf+, Ta+, and W+) and with several main-group cations (As+, Sb+) and less efficiently with Se+, Re+ and Os+. Other ions, including most late transition and main-group metal cations, react with CS2 with measurable rates mostly through CS2 addition or not at all (K+, Rb+, Cs+). Traces of excited states (< 10%) were seen from an inspection of the observed product ions to be involved in the reactions with Mo+, Te+, Ba+ and Au+ and possibly Pt+ and Ir+. The primary products YS+, ZrS+, NbS+, HfS+, TaS+, WS+, ReS+ and OsS+ react further by S-atom transfer to form MS2(+), and TaS2(+) reacts further to form TaS3(+). CS2 addition occurs with the cations MCS2(+), MS+, MS2(+), CS2(+), and TaS3(+) to form M+(CS2)(n) (n < or = 4), MS+(CS2)(n) (n < or = 4), MS2(+)(CS2)(n) (n < or = 3), (CS2)2(+) and TaS3(+)(CS2). Up to four CS2 molecules add sequentially to bare metal cations and monosulfide cations, and three to disulfide cations. Equilibrium constant measurements are reported that provide some insight into the standard free energy change for CS2 ligation. Periodic variations in deltaG degrees are as expected from the variation in electrostatic attraction, which follows the trend in atomic-ion size and the trend in repulsion between the orbitals of the atomic cations and the occupied orbitals of CS2.     

Heavy water reactions with atomic transition-metal and main-group cations: gas phase room-temperature kinetics and periodicities in reactivity

Reactions of heavy water, D(2)O, have been measured with 46 atomic metal cations at room temperature in a helium bath gas at 0.35 Torr using an inductively coupled plasma/selected ion flow tube tandem mass spectrometer. The atomic cations were produced at ca. 5500 K in an ICP source and were allowed to decay radiatively and thermalize by collisions with Ar and He atoms prior to reaction. Rate coefficients and product distributions are reported for the reactions of fourth-row atomic cations from K+ to Se+, of fifth-row atomic cations from Rb+ to Te+ (excluding Tc+), and of sixth-row atomic cations from Cs+ to Bi+. Primary reaction channels were observed leading to O-atom transfer, OD transfer, and D2O addition. O-Atom transfer occurs almost exclusively (>or=90%) in the reactions with most early transition-metal cations (Sc+, Ti+, V+, Y+, Zr+, Nb+, Mo+, Hf+, Ta+, and W+) and to a minor extent (10%) with one main-group cation (As+). OD transfer is observed to occur only with three cations (Sr+, Ba+, and La+). Other cations, including most late transition and main-group cations, were observed to react with D2O exclusively and slowly by D2O addition or not at all. O-Atom transfer proceeds with rate coefficients in the range of 8.1 x 10(-13) (As+) to 9.5 x 10(-10) (Y+) cm3 molecule(-1)(s-1) and with efficiencies below 0.1 and even below 0.01 for the fourth-row atomic cations V+ (0.0032) and As+ (0.0036). These low efficiencies can be understood in terms of the change in spin required to proceed from the reactant to the product potential energy surfaces. Higher order reactions are also measured. The primary products, NbO+, TaO+, MoO+, and WO+, are observed to react further with D(2)O by O-atom transfer, and ZrO+ and HfO+ react further through OD group abstraction. Up to five D(2)O molecules were observed to add sequentially to selected M+ and MO+ as well as MO2+ cations and four to MO(2)D+. Equilibrium measurements for sequential D(2)O addition to M+ are also reported. The periodic variation in the efficiency (k/k(c)) of the first addition of D(2)O appears to be similar to the periodic variation in the standard free energy (DeltaG degrees) of hydration.     

FTIR spectroscopic study of low temperature NO adsorption and NO + O2 coadsorption on H-ZSM-5

Adsorption of NO and coadsorption of NO and O2 on H-ZSM-5 have been studied at low and room temperature by means of FTIR spectroscopy. For better interpretation of the spectra, experiments involving isotopic labeled molecules have been performed. Low temperature adsorption of NO on H-ZSM-5 results initially in formation of NO which is H-bonded to the zeolite acidic hydroxyls. A second NO molecule is inserted into the OH-NO species at higher coverages, thus forming OH(NO)2 complexes. Different kinds of NO dimers are also formed. Negligible amounts of oxygenated compounds have been detected. In the presence of oxygen, the (di)nitrosyl species are oxidized very fast even at 100 K to N2O3, NO+, NO2, and N2O4. Different kinds of adsorbed N2O3 species have been evidenced. With increasing temperature, NO+ migrates and occupies cationic positions. The latter species interacts with NO at low temperature to give an [ONNO]+ complex. This reaction is used to prove that the different bands in the 2206-2180 cm(-1) region are also due to NO+ species.     

Oxidation of propane over ammonium-transition metal mixed keggin phosphomolybdate salts

Mixed ammonium-transition metal salts with formula of (NH4)xMyHzPMo12O40 (M = Ni2+, Co2+ or Fe 3+) denoted as MPMo12 have been investigated for the oxidation of propane, with molecular oxygen, at temperature range between 380℃ and 420℃ after in-situ pre-treatment performed at two heating rate of 5 or 9℃/min. They were characterized by BET method, XRD, UV-Vis and IR techniques. The catalysts were found to be active in the propane oxidation and selective to propene or acrolein, in particular for samples pre-t...     

Analysis of HO2 and OH formation mechanisms using FM and UV spectroscopy in dimethyl ether oxidation

Product formation pathways in the photolytically initiated oxidation of CH3OCH3 have been investigated as a function of temperature (298-600 K) and pressure (20-90 Torr) through the detection of HO2 and OH using Near-infrared frequency modulation spectroscopy, as well as the detection of CH3OCH2O2 using UV absorption spectroscopy. The reaction was initiated by pulsed photolysis with a mixture of Cl2, O2, and CH3OCH3. The HO2 and OH yield is obtained by comparison with an established reference mixture, including CH3OH. The CH3OCH2O2 yield is also obtained through the procedure of estimating the CH3OCH2O2/HO2 ratio from their UV absorption. A notable finding is that the OH yield is 1 order of magnitude larger than those known in C2 and C3 alkanes, increasing from 10% to 40% with increasing temperature. The HO2 yield increases gradually until 500 K and sharply up to 40% over 500 K. The CH3OCH2O2 profile has a prompt rise, followed by a gradual decay whose time constant is consistent with slow HO2 formation. To predict species profiles and yields, simple chlorine-initiated oxidation model of DME under low-pressure condition was constructed based on the existing model and the new reaction pathways, which were derived from this study. To model rapid OH formation, OH direct formation from CH3OCH2 + O2 was required. We have also proposed that a new HCO formation pathway via QOOH isomerization to HOQO species and OH + CH3OCH2O2 --> HO2 + CH3OCH2O are to be considered, to account for the fast and slow HO2 formations, as well as the total yield. The constructed model including these new pathways has successfully predicted experimental results throughout the entire temperature and pressure ranges investigated. It was revealed that the HO2 formation mechanism changes at 500 K, i.e., HCO + O2 via HCHO + OH and the above proposed direct HCO formation dominates over 500 K, while a series of reactions following CH3OCH2O2 self-reaction and OH + CH3OCH2O2 reaction mainly contribute below 500 K. The pressure dependent rate constant of the CH3OCH2 thermal decomposition reaction has been separately measured since it has large negative sensitivity for HO2 formation and is essential to eliminate the ambiguity in the CH3OCH2 + O2 mechanism at higher temperature.     

Novel process for generating useful electrophiles from common anions using Selectfluor fluorination agent

In the present work, the electrophile equivalents Cl+, Br+, SCN+, and NO2+ are generated from their respective sodium, potassium, and in some cases ammonium salts (M+X-) by reaction with Selectfluor electrophilic fluorination agent in acetonitrile solution at room temperature. These generated electrophilic species subsequently react in situ with a variety of aromatic substrates containing one or more substituent groups including H, F, Cl, CH3, COOH, C(O)CH3, NO2, and OR' and NR'R' ' where R' and R' ' are H or CH3. The resulting substitution products are, in most cases, isolable as pure compounds in high yield. Variations in the process include the use of other anions, electrophilic fluorination agents, and solvents.     

VPO催化剂的再生性质及其对晶格氧选择氧化丙烷的影响

采用脉冲反应器,研究了ＶＰＯ催化剂的再生性质及其对晶格氧选择氧化丙烷制丙烯酸和乙酸的影响,结果表明,ＶＰＯ催化剂与气相分子氧反应的速度要比丙烷与其 和氧反应的速度慢许多,因此以丙烷－Ｏ２共进料方式进行反应时,催化剂氧化再生是速度控制步骤,水是影响催化剂选择性的重要因素,但对活性影响不大,在反应温度下,水在ＶＰＯ催化剂 为可逆吸附,容易脱附流失,催化丙烷反应生成目的的产物的活性中心很稳定,主要是晶格     

工艺参数对o-LiMnO2相纯度及Li1.6Mn1.6O4合成的影响及作用（英文）

以MnSO4,KMnO4及LiOH为原料,经水热处理后得到LiMnO2,再由固相焙烧得到尖晶石相Li1.6Mn1.6O4,酸洗处理后得到锂离子筛。研究了水热温度,氧气和MnO4-/Mn2+的物质的量之比(nMnO4∶nMn^2+)对所得LiMnO2的组成及相应前驱体Li1.6Mn1.6O4酸处理中Mn溶损率的影响。开路电势测量及化学分析表明,氧气会参与反应。若按照理论氧化剂用量nMonO4∶nMn^2+=1∶4进行水热反应会导致杂质Li2MnO3和LiMn2O4的生成。若控制水热温度为160℃,nMnO4∶nMn^2+=1∶6时可得到纯相正交LiMnO2(o-LiMnO2)。所得离子筛在高镁锂比盐湖卤水中Li+吸附容量可达42.87 mg·g^-1,且对Li+具有优异的选择吸附性并遵循化学吸附过程。经过5个循环后吸附容量保持在37.21 mg·g^-1,锰溶损率降至0.34%。