首页 | 本学科首页   官方微博 | 高级检索  
     检索      

工艺参数对o-LiMnO2相纯度及Li1.6Mn1.6O4合成的影响及作用(英文)
引用本文:符雨尧,杨喜云,黄海强,王园园,李计深.工艺参数对o-LiMnO2相纯度及Li1.6Mn1.6O4合成的影响及作用(英文)[J].无机化学学报,2020,36(3):536-546.
作者姓名:符雨尧  杨喜云  黄海强  王园园  李计深
作者单位:中南大学冶金与环境学院, 长沙 410083,中南大学冶金与环境学院, 长沙 410083,中南大学冶金与环境学院, 长沙 410083,中南大学冶金与环境学院, 长沙 410083,中南大学冶金与环境学院, 长沙 410083
基金项目:国家自然科学基金(No.51574286)、中国博士后科学基金(No.2016M592448)和中南大学博士后基金资助项目
摘    要:以MnSO4,KMnO4及LiOH为原料,经水热处理后得到LiMnO2,再由固相焙烧得到尖晶石相Li1.6Mn1.6O4,酸洗处理后得到锂离子筛。研究了水热温度,氧气和MnO4-/Mn2+的物质的量之比(nMnO4∶nMn^2+)对所得LiMnO2的组成及相应前驱体Li1.6Mn1.6O4酸处理中Mn溶损率的影响。开路电势测量及化学分析表明,氧气会参与反应。若按照理论氧化剂用量nMonO4∶nMn^2+=1∶4进行水热反应会导致杂质Li2MnO3和LiMn2O4的生成。若控制水热温度为160℃,nMnO4∶nMn^2+=1∶6时可得到纯相正交LiMnO2(o-LiMnO2)。所得离子筛在高镁锂比盐湖卤水中Li+吸附容量可达42.87 mg·g^-1,且对Li+具有优异的选择吸附性并遵循化学吸附过程。经过5个循环后吸附容量保持在37.21 mg·g^-1,锰溶损率降至0.34%。

关 键 词:水热合成  尖晶石相  离子筛  Li1.6Mn1.6O4  锂吸附
收稿时间:2019/9/26 0:00:00
修稿时间:2019/11/28 0:00:00

Role of Process Parameters on Phase Purity of o-LiMnO2 and Synthesis of Li1.6Mn1.6O4 as Lithium Ion-Sieve
FU Yu-Yao,YANG Xi-Yun,HUANG Hai-Qiang,WANG Yuan-Yuan and LI Ji-Shen.Role of Process Parameters on Phase Purity of o-LiMnO2 and Synthesis of Li1.6Mn1.6O4 as Lithium Ion-Sieve[J].Chinese Journal of Inorganic Chemistry,2020,36(3):536-546.
Authors:FU Yu-Yao  YANG Xi-Yun  HUANG Hai-Qiang  WANG Yuan-Yuan and LI Ji-Shen
Institution:School of Metallurgy and Environment, Central South University, Changsha 410083, China,School of Metallurgy and Environment, Central South University, Changsha 410083, China,School of Metallurgy and Environment, Central South University, Changsha 410083, China,School of Metallurgy and Environment, Central South University, Changsha 410083, China and School of Metallurgy and Environment, Central South University, Changsha 410083, China
Abstract:Spinel Li1.6Mn1.6O4 was synthesized by hydrothermal oxidation of MnSO4 with KMnO4 to form LiMnO2 following solid-phase roasting.Acid pickling transforms Li1.6Mn1.6O4 to lithium ion-sieve.The effects of hydrothermal temperature,oxygen and molar ratio of MnO4-to Mn2+(nMnO4∶nMn^2+)on LiMnO2 composition and the dissolution percentage of manganese from Li1.6Mn1.6O4 during acid pickling were investigated.Open circuit potential measurement and chemical analysis indicate that oxygen in the air has involved in the hydrothermal reaction to produce LiMnO2 accompanied by formation of Li2MnO3 and LiMn2O4 impurities at a theoretical nMonO4∶nMn^2+of 1∶4.Pure orthogonal LiMnO2(o-LiMnO2)was obtained with a molar ratio of MnO4-to Mn^2+of 1∶6 at 160℃.The Li+adsorption capacity in salt lake brine was 42.87 mg·g-1.The lithium ion-sieve showed excellent adsorption selectivity toward Li+in salt lake brine and followed a chemical adsorption process.The adsorption capacity remained at 37.21 mg·g-1 and the dissolution percentage of manganese decreased to 0.34%after 5 cycles.
Keywords:hydrothermal synthesis  spinel phase  ion-sieve  Li1  6Mn1  6O4  Li adsorption
本文献已被 维普 等数据库收录!
点击此处可从《无机化学学报》浏览原始摘要信息
点击此处可从《无机化学学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号