P(VAc-MMA)为基体的聚合物电解质研究

以醋酸乙烯酯(VAc)和甲基丙烯酸甲酯(MMA)为单体, 采用半连续种子乳液聚合法制备了无规共聚物聚(醋酸乙烯酯-甲基丙烯酸甲酯)[P(VAc-MMA)], 并以此聚合物为基体制备了聚合物电解质. 用红外光谱(FTIR)、核磁共振氢谱(¹H NMR)、扫描电镜(SEM)、差热/热重分析(DSC/TG)、X射线衍射(XRD)、机械性能测试和电化学交流阻抗等方法对聚合物和聚合物电解质的性质进行了研究. 测试结果表明: VAc和MMA聚合生成P(VAc-MMA); 聚合物膜含有大量微孔结构, 利于离子传输; 聚合物电解质膜具有优良的热稳定性和机械强度; 25 ℃下, 最高的离子电导率达到了1.27× 10^－3 S•cm^－1; 离子电导率随着温度的升高而迅速增加, 电导率-温度曲线符合Arrhenius方程.     

尿素作为造孔剂对聚乙烯支撑的PAMS聚合物电解质性能的改进

采用乳液聚合法合成聚(丙烯腈-甲基丙烯酸甲酯-苯乙烯) (P(AN-MMA-ST)或者共聚物PAMS), 并利用尿素作为造孔剂制备了聚乙烯(PE)支撑的PAMS聚合物膜(PE-PAMS-U)及凝胶聚合物电解质(GPE). 利用傅里叶变换红外(FTIR)光谱、X射线衍射(XRD)、扫描电子显微镜(SEM)、热重(TG)分析、线性电位扫描(LSV)、电化学阻抗谱(EIS)以及充放电等方法对PAMS聚合物以及PE支撑的聚(丙烯腈-甲基丙烯酸甲酯-苯乙烯) (PE-PAMS)聚合物隔膜及凝胶聚合物电解质的性能进行了研究. 结果表明, 利用尿素作为造孔剂可以提高PE-PAMS凝胶聚合物的性能. 由于尿素的加入, 聚合物膜呈现均匀的微孔结构, 室温下的电导率从1.1×10^-3 S·cm^-1提高到2.15×10^-3 S·cm^-1. 同时, 锂电极/聚合物电解质界面上的电荷传递电阻也从480 Ω·cm²降低到 250 Ω·cm². 电化学稳定窗口为5.0 V. 电池(Li/PE支撑的GPE/LiCoO₂)的测试证明, 用尿素作为造孔剂的凝胶聚合物锂离子电池表现出优良的倍率性能和循环性能.     

一种新型凝胶态聚合物电解质的制备和性能

采用一种新型胶联剂新戊二醇二丙烯酸酯(noepentyl glycol diacrylate, NPGDA)和聚偏氟乙烯-六氟丙烯(poly(vinylidene fluoride-co-hexafluoropropylene), PVDF-HFP), 液态电解液组成电解质混合溶液, 然后加入引发剂并加热引发聚合反应制备了一种具有互穿聚合物网络结构的凝胶态聚合物电解质, 可以用于制备聚合物锂离子二次电池. 考察了不同PVDF-HFP/NPGDA质量比对凝胶态聚合物电解质性能的影响. 结果表明, PVDF-HFP/NPGDA质量比可以影响凝胶态聚合物电解质的结构形貌、电化学特性以及聚合物锂离子二次电池的性能. 研究发现, 当m(PVDF-HFP)/m(NPGDA)＝1:1时制备的凝胶态聚合物电解质具有较高的离子电导率和电化学稳定窗口, 室温下分别为6.99×10^-3 S•cm^-1和4.8 V(vs Li⁺/Li), 以其为电解质制备的聚合物锂离子二次电池具有较好的电化学性能.     

一种新型物理交联型凝胶聚合物电解质的制备与表征

以甲氧基聚乙二醇甲基丙烯酸酯(MPEGM)和十六烷基聚乙二醇甲基丙烯酸酯(HPEGM)为单体, 三乙二醇二甲醚(TEGDME)为增塑剂, 与锂盐(高氯酸锂, LiClO₄)和光引发剂(安息香二甲醚, DMPA)复合制成光敏体系, 经紫外(UV)固化得到物理交联型凝胶聚合物电解质(GPE)薄膜. 用红外(IR)光谱、差热分析(DSC)、拉伸测试和交流阻抗(AC) 等方法对聚合物基体和电解质的性能进行了研究.结果表明: 当共聚物P(MPEGM-co-HPEGM)中HPEGM含量为50%(w)时, 十六烷基链段(C₁₆)在聚氧化乙烯(PEO)链段静电斥力的作用下发生聚集, 自组装形成了物理交联, 提高了共聚物的空间稳定性; 温度和电解质中各组分的含量对电导率均有较大的影响, 综合性能较好的电解质在30℃时电导率可达0.87×10^-3 S·cm^-1; 采用循环伏安法测得该电解质的电化学窗口为0~4.5 V (vs. Li/Li⁺), 可以满足锂离子电池的应用要求; 组装成的LiFePO₄/GPE/Li电池, 在30℃下以0.1 C和0.2 C倍率进行充放电测试, 首次放电容量分别为154.7和148.0 mAh·g^-1.     

四配位硅单体及其共聚物的制备和结构表征

研究了直接从无定形二氧化硅出发, 与乙二醇、氢氧化钾反应, 生成高反应活性的五配位硅钾化合物, 并以此为原料与含活泼氯的3-氯丙烯反应制备出含双键官能团的四配位硅单体. 讨论了合成单体的条件如温度、反应时间、反应物浓度、溶液pH值及溶剂等因素的影响. 然后以该四配位硅单体与甲基丙烯酸甲酯(MMA)在偶氮二异丁腈(AIBN)作引发剂下进行自由基聚合得到支链含硅共聚物. 并借助于红外光谱(IR)、核磁共振(¹³C和¹H, ²⁹Si)、能谱元素分析对合成的单体进行了结构表征; 用红外光谱(IR)、热失重谱(TG)、差示扫描量热谱(DSC)、凝胶渗透色谱法(GPC)等现代测试手段对支链含硅共聚物进行了结构表征及热性能分析. IR表明四配位硅单体在1646 cm^－1处是C＝C的伸缩振动吸收峰, 在共聚物中此峰消失; TG表明共聚物在249.6 ℃才开始失重, 552 ℃有机部分失重完毕; GPC分析表明共聚物的数均分子量为8.7万.     

基于新型交联聚合物电解质的准固态染料敏化太阳能电池

采用柠檬酸(CA)交联聚乙二醇(oligo-PEG, 平均分子量M_w=200, 400, 1000, 2000), 合成具有可生物降解性能的聚柠檬酸-乙二醇(PCE)交联聚酯, 并以此为基体材料制备得到准固态的三维交联型PCE/LiI/I₂聚合物电解质. 采用红外吸收光谱(IR)、核磁共振氢谱(¹H-NMR)、扫描电镜(SEM)和Raman光谱分别对PCE基体的分子结构、聚合物电解质的微观形貌以及导电离子对的存在形式进行表征; 通过线性扫描伏安法(LSV)研究了聚合物电解质的离子扩散系数、电导率以及电池的输出电流-电压(I-V)性能. 结果表明, PEG的分子量影响PCE基体膜的微观形貌及其吸液性能, 从而影响聚合物电解质的离子导电性能及电池的光电性能: 随着PEG分子量M_w从200, 400, 1000增大到2000, PCE基体膜的结构变得疏松, 吸液率增加, 吸液溶胀后的基体中I-3的跃迁活化能降低, 导致电解质的电导率和电池的短路光电流密度随之增加; 在60 mW·cm^-2的入射光强下, 四种电解质对应电池的光电转化效率依次为3.26%、3.34%、4.26%和4.89%.     

P(VAc-MA)/PMMA为基体的聚合物电解质制备及其在电致变色器件中的应用

以醋酸乙烯酯(VAc)和丙烯酸甲酯(MA)为单体, 采用半连续种子乳液聚合法制备了无规共聚物P(VAc-MA), 以PMMA与P(VAc-MA)的共混物为基体制备了聚合物电解质. 用红外光谱(FTIR)、X射线衍射(XRD)、热重分析(TG)、紫外光谱(UV)、力学性能测试及电化学交流阻抗等方法研究了聚合物、聚合物膜和聚合物电解质的性质. 结果表明, VAc与MA通过打开各自的CC键聚合生成P(VAc-MA); P(VAc-MA)与PMMA共混后结晶状态发生了变化, 增加了无定形相区, 降低了链段运动的能量壁垒, 提高了热稳定性和拉伸强度. 以P(VAc-MA)/PMMA为基体的聚合物电解质膜具有很高的透明性, 最大室温电导率达到1.17×10-3 S/cm; 离子电导率随着温度的升高而迅速增加, 电导率-温度曲线符合Arrhenius方程; 将此电解质用于全固态电致变色显示器件显示出优良的性能.     

MMA/MAh共聚物的合成及其凝胶聚合物电解质性能

从聚甲基丙烯酸甲酯型凝胶聚合物电解质存在的问题出发,设计制备一种甲基丙烯酸甲酯/共聚马来酸酐型凝胶聚合物电解质.采用溶液聚合法,以偶氮二异丁腈(AIBN)为引发剂,甲基丙烯酸甲酯(MMA)、顺丁烯二酸酐(MAh)为单体,其MMA与MAh单体摩尔配比为1∶1,合成了P(MMA-co-MAh)共聚物;采用凝胶色谱(GPC)、傅立叶红外光谱(FTIR)、核磁共振(MNR)、示差扫描量热法(DSC)、热失重分析(TGA)、X-射线衍射分析(XRD)对所合成共聚物的结构进行了表征.结果表明,合成的共聚物为无规非晶型聚合物,其数均分子量Mn为6.40×104,共聚物中MMA与MAh链段摩尔比大约为8∶1,热分解温度为300℃,玻璃化转变温度(Tg)为121.3℃.以P(MMA-co-MAh)共聚物为树脂基体,环状碳酸1,2-丙二酯(PC)为增塑剂,LiClO4为电解质盐,制备了凝胶聚合物电解质(GPE),当共聚物含量为45 wt%时,GPE具有好的成膜性,其室温离子电导率为3.0×10-5S/cm.     

PEO-LiClO4-ZSM5复合聚合物电解质 I. 电化学研究

首次以“择形”分子筛ZSM5为填料, 通过溶液浇铸法制得PEO-LiClO₄-ZSM5全固态复合聚合物电解质(CPE)膜. 交流阻抗实验表明ZSM5的引入可以显著地提高CPE的离子电导率. 利用交流阻抗-稳态电流相结合的方法对CPE的锂离子迁移数进行了测定, 结果表明掺入ZSM5后锂离子迁移数明显升高. ZSM5的含量为10%时, CPE同时具有最高离子电导率1.4×10^－5 S•cm^－1(25 ℃)和最大锂离子迁移数0.353. PEO-LiClO₄-ZSM5/Li电极界面稳定性实验表明PEO-LiClO₄-ZSM5复合聚合物电解质在全固态锂离子电池领域具有良好的应用前景.     

PEO-LiClO4-ZSM5复合聚合物电解质 I. 电化学研究

首次以“择形”分子筛ZSM5为填料, 通过溶液浇铸法制得PEO-LiClO₄-ZSM5全固态复合聚合物电解质(CPE)膜. 交流阻抗实验表明ZSM5的引入可以显著地提高CPE的离子电导率. 利用交流阻抗-稳态电流相结合的方法对CPE的锂离子迁移数进行了测定, 结果表明掺入ZSM5后锂离子迁移数明显升高. ZSM5的含量为10%时, CPE同时具有最高离子电导率1.4×10^－5 S•cm^－1(25 ℃)和最大锂离子迁移数0.353. PEO-LiClO₄-ZSM5/Li电极界面稳定性实验表明PEO-LiClO₄-ZSM5复合聚合物电解质在全固态锂离子电池领域具有良好的应用前景.     

Preparation and performance analysis of PE-supported P(AN-co-MMA) gel polymer electrolyte for lithium ion battery application

Copolymer, poly(acrylonitrile-co-methyl methacrylate) (P(AN-co-MMA)), was synthesized by solution polymerization with different mole ratios of monomers, acrylonitrile (AN) and methyl methacrylate (MMA). Polyethylene (PE) supported copolymer and gel polymer electrolyte (GPE) were prepared with this copolymer and their performances were characterized with FTIR, TGA, SEM, and electrochemical methods. It is found that the GPE using the PE-supported copolymer with AN to MMA = 4:1 (mole) exhibits an ionic conductivity of 2.06 × 10⁻³ S cm⁻¹ at room temperature. The copolymer is stable up to 270 °C. The PE-supported copolymer shows a cross-linked porous structure and has 150 wt% of electrolyte uptake. The GPE is compatible with anode and cathode of lithium ion battery at high voltage and its electrochemical window is 5.5 V (vs. Li/Li⁺). With the application of the PE-supported GPE in lithium ion battery, the battery shows its good rate and initial discharge capacity and cyclic stability.     

Cross-linking copolymers of acrylates’ gel electrolytes with high conductivity for lithium-ion batteries

The cross-linking gel copolymer electrolytes containing alkyl acrylates, triethylene glycol dimethacrylate, and liquid electrolyte were prepared by in situ thermal polymerization. The gel polymer electrolytes containing 15 wt% polymer content and 85 wt% liquid electrolyte content with sufficient mechanical strength showed the high ionic conductivity around 5?×?10^?3 Scm^?1 at room temperature. The gel electrolytes containing different polymer matrices were prepared, and their physical observation and conductivity were discussed carefully. The cross-linking copolymer gel electrolytes of alkyl acrylates with other monomers were designed and synthesized. The results showed that copolymerization can improve the mechanical properties and ionic conductivities of the gel electrolytes. The polymer matrices of gels had excellent thermal stability and electrochemical stability. The scanning electron microscope analysis showed the gel electrolyte was the homogeneous structure, and the cross-linking polymer host was the porous three-dimensional network structure, which demonstrated the high conductivity of the gel electrolytes. The gel polymer Li-ion battery was prepared by this in situ thermal polymerization. The cell exhibited high charge-discharge efficiency at 0.1 C. The results of LiFePO4-PEA-Li cell and graphite-PEA-Li cell showed that gel polymer electrolytes have good compatibility with the battery electrodes materials.     

STUDY ON THE PREPARATION AND PERFORMANCES OF P(VAc-MMA) POLYMER ELECTROLYTES FOR LITHIUM ION BATTERY

A random copolymer P(VAc-MMA)was synthesized via seeded emulsion copolymerization with vinyl acetate (VAc)and methyl methacrylate(MMA)as monomers,and the polymer electrolytes comprising blend of corresponding copolymer P(VAc-MMA)as a host polymer and LiClO_4 as a dopant were prepared by solution casting technique. Performances of the synthesized copolymer and prepared polymer membrane and electrolyte were studied by FTIR,XRD, TG,DSC,mechanical testing and AC impedance.According to the study of FTIR and D...     

Electrospun octa(3-chloropropyl)-polyhedral oligomeric silsesquioxane-modified polyvinylidene fluoride/poly(acrylonitrile)/poly(methylmethacrylate) gel polymer electrolyte for high-performance lithium ion battery

Gel polymer electrolyte (GPE) based on octa(3-chloropropyl)-polyhedral oligomeric silsesquioxane (OCP-POSS)-modified polyvinylidene fluoride/poly(acrylonitrile) /poly(methylmethacrylate) (PVDF/PAN/PMMA) fibrous membrane was prepared by electrospinning method to improve the thermal stability of GPE and prevent the leakage of liquid electrolyte for lithium ion battery. The effect of OCP-POSS content on the morphology, porosity and electrolyte uptake, mechanical strength, thermal stability of spinning fibrous membrane and ionic conductivity, electrochemical stability window, and interface resistance of GPE was investigated. The cycle performance of cells assembled with GPE was also tested. The results show that the spinning fibrous membrane with 10 wt% OCP-POSS possesses high electrolyte uptake (660%) and excellent thermal stability. The ionic conductivity of corresponding GPE is 9.23 × 10^?3 S cm^?1 at room temperature and the electrochemical stability window is up to 5.82 V; the interface resistance of 10 wt% OCP-POSS modified GPE decreases by 42% after 168 h compared with pure PVDF/PAN/PMMA GPE. Furthermore, cells assembled with 10 wt% OCP-POSS modified GPE show high discharge capacity (166.5 mA h g^?1 at 0.1 C) and excellent cycle stability during 50 cycles. The results indicate that the GPE could improve the safety of lithium ion battery and show great potential in lithium ion battery applications.     

Enhanced electrochemical properties of a novel polyvinyl formal membrane supporting gel polymer electrolyte by Al2O3 modification

Polyvinyl formal (PVFM)‐based dense polymer membranes with nano‐Al₂O₃ doping are prepared via phase inversion method. The membranes and also their performances as gel polymer electrolytes (GPEs) for lithium ion battery are studied by field emission scanning electron microscope, X‐ray diffraction, differential scanning calorimetry, mechanical strength test, electrolyte uptake test, electrochemical impedance spectroscopy, cyclic voltammetry, and charge–discharge test. The polymer membrane with 3 wt % nano‐Al₂O₃ doping shows the improved mechanical strength of 12.16 MPa and electrolyte uptake of 431.25% compared with 10.47 MPa and 310.59% of the undoped sample, respectively. The membrane absorbs and swells liquid electrolyte to form stable GPE with ionic conductivity of 4.92 × 10^?4 S cm^?1 at room temperature, which is higher than 1.77 × 10^?4 S cm^?1 of GPE from the undoped membrane. Moreover, the Al₂O₃‐modified membrane supporting GPE exhibits wide electrochemical stability window of 1.2–4.8 V (vs. Li/Li⁺) and good compatibility with LiFePO₄ electrode, which implies Al₂O₃‐modified PVFM‐based GPE to be a promising candidate for lithium ion batteries. © 2014 Wiley Periodicals, Inc. J. Polym. Sci. Part B: Polym. Phys. 2014 , 52, 572–577     

Electrospun cellulose acetate/poly(vinylidene fluoride) nanofibrous membrane for polymer lithium-ion batteries

The membranes for gel polymer electrolyte (GPE) for lithium-ion batteries were prepared by electrospinning a blend of poly(vinylidene fluoride) (PVdF) with cellulose acetate (CA). The performances of the prepared membranes and the resulted GPEs were investigated, including scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), X-ray diffraction (XRD), porosity, hydrophilicity, electrolyte uptake, mechanical property, thermal stability, AC impedance measurements, linear sweep voltammetry, and charge–discharge cycle tests. The effect of the ratio of CA to PVdF on the performance of the prepared membranes was considered. It is found that the GPE based on the blended polymer with CA:PVdF =2:8 (in weight) has an outstanding combination property-strength (11.1 MPa), electrolyte uptake (768.2 %), thermal stability (no shrinkage under 80 °C without tension), and ionic conductivity (2.61 × 10^?3 S cm^?1). The Li/GPE/LiCoO₂ battery using this GPE exhibits superior cyclic stability and storage performance at room temperature. Its specific capacity reaches up to 204.15 mAh g^?1, with embedded lithium capacity utilization rate of 74.94 %, which is higher than the other lithium-ion batteries with the same cathode material LiCoO₂ (about 50 %).