Nitrosation, thiols, and hemoglobin: energetics and kinetics

Nitrosothiols are powerful vasodilators. Although the mechanism of their formation near neutral pH is an area of intense research, neither the energetics nor the kinetics of this reaction or of subsequent reactions have been addressed. The following considerations may help to guide experiments. (1) The standard Gibbs energy for the homolysis reaction RSNO → RS(?) + NO(?)(aq) is +110 ± 5 kJ mol(-1). (2) The electrode potential of the RSNO, H(+)/RSH, NO(?)(aq) couple is -0.20 ± 0.06 V at pH 7. (3) Thiol nitrosation by NO(2)(-) is favorable by 37 ± 5 kJ mol(-1) at pH 7. (4) N(2)O(3) is not involved in in vivo nitrosation mechanisms for thermodynamic--its formation from NO(2)(-) costs 59 kJ mol(-1)--or kinetic--the reaction being second-order in NO(2)(-)--reasons. (5) Hemoglobin (Hb) cannot catalyze formation of N(2)O(3), be it via the intermediacy of the reaction of Hb[FeNO(2)](2+) with NO(?) (+81 kJ mol(-1)) or reaction of Hb[FeNO](3+) with NO(2)(-) (+88 kJ mol(-1)). (6) Energetically and kinetically viable are nitrosations that involve HNO(2) or NO(?) in the presence of an electron acceptor with an electrode potential higher than -0.20 V. These considerations are derived from existing thermochemical and kinetics data.     

Integration of catalysis and analysis is the key: rapid and precise investigation of the catalytic asymmetric Gosteli-Claisen rearrangement

The kinetics of the Cu(II)(bisoxazoline)-catalyzed diastereo- and enantioselective Gosteli-Claisen rearrangement of 2-alkoxycarbonyl-substituted allyl vinyl ethers has been investigated by enantioselective on-column reaction gas chromatography (ocRGC). Enantioselective ocRGC integrates (stereoselective) catalysis and enantioselective chromatography in a single microcapillary, which is installed in a GC-MS for direct analysis of conversion and selectivity. Thus, this technique allows direct differentiation of thermal and stereoselectively catalyzed reaction pathways and determination of activation parameters and selectivities of the individual reaction pathways starting from stereoisomeric reactants with high precision. Two modes of operation of enantioselective ocRGC are presented to investigate noncatalyzed, i.e., conversion of isopropyl-2-(allyloxy)but-2Z-enoate 1 to isopropyl-3R,S-methyl-2-oxy-hex-5-enoate (±)-2 and the [Cu{(R,R)-Ph-box}](SbF(6))(2)-catalyzed Gosteli-Claisen rearrangement, i.e., conversion of isopropyl-2-(but-2'E-en-1-yloxy)but-2Z-enoate (E,Z)-3 to isopropyl-3S,4S-dimethyl-2-oxy-hex-5-enoate 4b. Eyring activation parameters have been determined by temperature-dependent measurements: Uncatalyzed rearrangement of 1 to (±)-2 gives ΔG(?) (298 K) = 114.1 ± 0.2 kJ·mol(-1), ΔH(?) = 101.1 ± 1.9 kJ·mol(-1), and ΔS(?) = -44 ± 5 J·(K·mol)(-1), and catalyzed rearrangement of (E,Z)-3 to 4b gives ΔG(?)(298 K) = 101.1 ± 0.3 kJ·mol(-1), ΔH(?) = 106.1 ± 6.6 kJ·mol(-1), and ΔS(?) = 17 ± 19 J·(K·mol)(-1).     

Thermal decomposition mechanism of 1-ethyl-3-methylimidazolium bromide ionic liquid

In order to better understand the volatilization process for ionic liquids, the vapor evolved from heating the ionic liquid 1-ethyl-3-methylimidazolium bromide (EMIM(+)Br(-)) was analyzed via tunable vacuum ultraviolet photoionization time-of-flight mass spectrometry (VUV-PI-TOFMS) and thermogravimetric analysis mass spectrometry (TGA-MS). For this ionic liquid, the experimental results indicate that vaporization takes place via the evolution of alkyl bromides and alkylimidazoles, presumably through alkyl abstraction via an S(N)2 type mechanism, and that vaporization of intact ion pairs or the formation of carbenes is negligible. Activation enthalpies for the formation of the methyl and ethyl bromides were evaluated experimentally, ΔH(?)(CH(3)Br) = 116.1 ± 6.6 kJ/mol and ΔH(?)(CH(3)CH(2)Br) = 122.9 ± 7.2 kJ/mol, and the results are found to be in agreement with calculated values for the S(N)2 reactions. Comparisons of product photoionization efficiency (PIE) curves with literature data are in good agreement, and ab initio thermodynamics calculations are presented as further evidence for the proposed thermal decomposition mechanism. Estimates for the enthalpy of vaporization of EMIM(+)Br(-) and, by comparison, 1-butyl-3-methylimidazolium bromide (BMIM(+)Br(-)) from molecular dynamics calculations and their gas phase enthalpies of formation obtained by G4 calculations yield estimates for the ionic liquids' enthalpies of formation in the liquid phase: ΔH(vap)(298 K) (EMIM(+)Br(-)) = 168 ± 20 kJ/mol, ΔH(f,?gas)(298 K) (EMIM(+)Br(-)) = 38.4 ± 10 kJ/mol, ΔH(f,?liq)(298 K) (EMIM(+)Br(-)) = -130 ± 22 kJ/mol, ΔH(f,?gas)(298 K) (BMIM(+)Br(-)) = -5.6 ± 10 kJ/mol, and ΔH(f,?liq)(298 K) (BMIM(+)Br(-)) = -180 ± 20 kJ/mol.     

NMR study of ligand exchange and electron self-exchange between oxo-centered trinuclear clusters [Fe3(μ3-O)(μ-O2CR)6(4-R'py)3](+/0)

The syntheses, single crystal X-ray structures, and magnetic properties of the homometallic μ?-oxo trinuclear clusters [Fe?(μ?-O)(μ-O?CCH?)?(4-Phpy)?](ClO?) (1) and [Fe?(μ?-O)(μ-O?CAd)?(4-Mepy)?](NO?) (2) are reported (Ad = adamantane). The persistence of the trinuclear structure within 1 and 2 in CD?Cl? and C?D?Cl? solutions in the temperature range 190-390 K is demonstrated by 1H NMR. An equilibrium between the mixed pyridine clusters [Fe?(μ?-O)(μ-O?CAd)?(4-Mepy)(3-x)(4-Phpy)(x)](NO?) (x = 0, 1, 2, 3) with a close to statistical distribution of these species is observed in CD?Cl? solutions. Variable-temperature NMR line-broadening made it possible to quantify the coordinated/free 4-Rpy exchanges at the iron centers of 1 and 2: k(ex)2?? = 6.5 ± 1.3 × 10?1 s?1, ΔH(?) = 89.47 ± 2 kJ mol?1, and ΔS(?) = +51.8 ± 6 J K?1 mol?1 for 1 and k(ex)2?? = 3.4 ± 0.5 × 10?1 s?1, ΔH(?) = 91.13 ± 2 kJ mol?1, and ΔS(?) = +51.9 ± 5 J K?1 mol?1 for 2. A limiting D mechanism is assigned for these ligand exchange reactions on the basis of first-order rate laws and positive and large entropies of activation. The exchange rates are 4 orders of magnitude slower than those observed for the ligand exchange on the reduced heterovalent cluster [Fe(III)?Fe(II)(μ?-O)(μ-O?CCH?)?(4-Phpy)?] (3). In 3, the intramolecular Fe(III)/Fe(II) electron exchange is too fast to be observed. At low temperatures, the 1/3 intermolecular second-order electron self-exchange reaction is faster than the 4-Phpy ligand exchange reactions on these two clusters, suggesting an outer-sphere mechanism: k?2?? = 72.4 ± 1.0 × 103 M?1 s?1, ΔH(?) = 18.18 ± 0.3 kJ mol?1, and ΔS(?) = -90.88 ± 1.0 J K?1 mol?1. The [Fe?(μ?-O)(μ-O?CCH?)?(4-Phpy)?](+/0) electron self-exchange reaction is compared with the more than 3 orders of magnitude faster [Ru?(μ?-O)(μ-O?CCH?)?(py)?](+/0) self-exchange reaction (ΔΔG(exptl)(?298) = 18.2 kJ mol?1). The theoretical estimated self-exchange rate constants for both processes compare reasonably well with the experimental values. The equilibrium constant for the formation of the precursor to the electron-transfer and the free energy of activation contribution for the solvent reorganization to reach the electron transfer step are taken to be the same for both redox couples. The larger ΔG(exptl)(?298) for the 1/3 iron self-exchange is attributed to the larger (11.1 kJ mol?1) inner-sphere reorganization energy of the 1 and 3 iron clusters in addition to a supplementary energy (6.1 kJ mol?1) which arises as a result of the fact that each encounter is not electron-transfer spin-allowed for the iron redox couple.     

Rates of water exchange for two cobalt(II) heteropolyoxotungstate compounds in aqueous solution

Polyoxometalate ions are used as ligands in water-oxidation processes related to solar energy production. An important step in these reactions is the association and dissociation of water from the catalytic sites, the rates of which are unknown. Here we report the exchange rates of water ligated to Co(II) atoms in two polyoxotungstate sandwich molecules using the (17)O-NMR-based Swift-Connick method. The compounds were the [Co(4)(H(2)O)(2)(B-α-PW(9)O(34))(2)](10-) and the larger αββα-[Co(4)(H(2)O)(2)(P(2)W(15)O(56))(2)](16-) ions, each with two water molecules bound trans to one another in a Co(II) sandwich between the tungstate ligands. The clusters, in both solid and solution state, were characterized by a range of methods, including NMR, EPR, FT-IR, UV-Vis, and EXAFS spectroscopy, ESI-MS, single-crystal X-ray crystallography, and potentiometry. For [Co(4)(H(2)O)(2)(B-α-PW(9)O(34))(2)](10-) at pH 5.4, we estimate: k(298)=1.5(5)±0.3×10(6) s(-1), ΔH(≠)=39.8±0.4 kJ mol(-1), ΔS(≠)=+7.1±1.2 J mol(-1) K(-1) and ΔV(≠)=5.6 ±1.6 cm(3) mol(-1). For the Wells-Dawson sandwich cluster (αββα-[Co(4)(H(2)O)(2)(P(2)W(15)O(56))(2)](16-)) at pH 5.54, we find: k(298)=1.6(2)±0.3×10(6) s(-1), ΔH(≠)=27.6±0.4 kJ mol(-1) ΔS(≠)=-33±1.3 J mol(-1) K(-1) and ΔV(≠)=2.2±1.4 cm(3) mol(-1) at pH 5.2. The molecules are clearly stable and monospecific in slightly acidic solutions, but dissociate in strongly acidic solutions. This dissociation is detectable by EPR spectroscopy as S=3/2 Co(II) species (such as the [Co(H(2)O)(6)](2+) monomer ion) and by the significant reduction of the Co-Co vector in the XAS spectra.     

Cooperative spin transition in the two-dimensional coordination polymer [Fe(4,4'-bipyridine)2(NCX)2]·4CHCl3 (X = S, Se)

Two new isostructural two-dimensional (2D) coordination polymers exhibiting spin crossover (SCO) behavior of formulation [Fe(4,4'-bipy)(2)(NCX)(2)]·4CHCl(3) (4,4'-bipy = 4,4'-bipyridine; X = S [1·4CHCl(3)], Se [2·4CHCl(3)]) have been synthesized and characterized, and both undergo cooperative spin transitions (ST). For 1·4CHCl(3) the ST takes place in two steps with critical temperatures of T(c1)(down) = 143.1 K, T(c2)(down) = 91.2 K, T(c1)(up) = 150.7 K, and T(c2)(up) = 112.2 K. 2·4CHCl(3) displays half ST characterized by T(c)(down) = 161.7 K and T(c)(up) = 168.3 K. The average enthalpy and entropy variations and cooperativity parameters associated with the ST have been estimated to be ΔH(1)(av) = 5.18 kJ mol(-1), ΔS(1)(av) = 35 J K(-1) mol(-1), and Γ(1) = 2.8 kJ mol(-1) and ΔH(2)(av) = 3.55 kJ mol(-1), ΔS(2)(av) = 35 J K(-1) mol(-1), and Γ(2) = 2.6 kJ mol(-1) for 1·4CHCl(3), and ΔH(av) = 6.25 kJ mol(-1), ΔS(av) = 38.1 J K(-1) mol(-1), and Γ = 3.2 kJ mol(-1) for 2·4CHCl(3). At T > [T(c1) (1·4CHCl(3)); T(c) (2·4CHCl(3))], both compounds are in the space group P2/c while at T < [T(c1) (1·4CHCl(3)); T(c) (2·4CHCl(3))] they change to the C2/c space group and display an ordered checkerboard-like arrangement of iron(II) sites where the high- and low-spin states coexist at 50%.     

Preparation and characterization of manganese(IV) in aqueous acetic acid

Mn(IV) acetate was generated in acetic acid solutions and characterized by UV-vis spectroscopy, magnetic susceptibility, and chemical reactivity. All of the data are consistent with a mononuclear manganese(IV) species. Oxidation of several substrates was studied in glacial acetic acid (HOAc) and in 95:5 HOAc-H(2)O. The reaction with excess Mn(OAc)(2) produces Mn(OAc)(3) quantitatively with mixed second-order kinetics, k (25.0 °C) = 110 ± 4 M(-1) s(-1) in glacial acetic acid, and 149 ± 3 M(-1) s(-1) in 95% AcOH, ΔH(?) = 55.0 ± 1.2 kJ mol(-1), ΔS(?) = -18.9 ± 4.1 J mol(-1) K(-1). Sodium bromide is oxidized to bromine with mixed second order kinetics in glacial acetic acid, k = 220 ± 3 M(-1) s(-1) at 25 °C. In 95% HOAc, saturation kinetics were observed.     

Rates of water exchange on the [Fe4(OH)2(hpdta)2(H2O)4]0 molecule and its implications for geochemistry

The ammonium salt of [Fe(4)O(OH)(hpdta)(2)(H(2)O)(4)](-) is soluble and makes a monospecific solution of [Fe(4)(OH)(2)(hpdta)(2)(H(2)O)(4)](0)(aq) in acidic solutions (hpdta = 2-hydroxypropane-1,3-diamino-N,N,N',N'-tetraacetate). This tetramer is a diprotic acid with pK(a)(1) estimated at 5.7 ± 0.2 and pK(a)(2) = 8.8(5) ± 0.2. In the pH region below pK(a)(1), the molecule is stable in solution and (17)O NMR line widths can be interpreted using the Swift-Connick equations to acquire rates of ligand substitution at the four isolated bound water sites. Averaging five measurements at pH < 5, where contribution from the less-reactive conjugate base are minimal, we estimate: k(ex)(298) = 8.1 (±2.6) × 10(5) s(-1), ΔH(++) = 46 (±4.6) kJ mol(-1), ΔS(++) = 22 (±18) J mol(-1) K(-1), and ΔV(++) = +1.85 (±0.2) cm(3) mol(-1) for waters bound to the fully protonated, neutral molecule. Regressing the experimental rate coefficients versus 1/[H(+)] to account for the small pH variation in rate yields a similar value of k(ex)(298) = 8.3 (±0.8) × 10(5) s(-1). These rates are ～10(4) times faster than those of the [Fe(OH(2))(6)](3+) ion (k(ex)(298) = 1.6 × 10(2) s(-1)) but are about an order of magnitude slower than other studied aminocarboxylate complexes, although these complexes have seven-coordinated Fe(III), not six as in the [Fe(4)(OH)(2)(hpdta)(2)(H(2)O)(4)](0)(aq) molecule. As pH approaches pK(a1), the rates decrease and a compensatory relation is evident between the experimental ΔH(++) and ΔS(++) values. Such variation cannot be caused by enthalpy from the deprotonation reaction and is not well understood. A correlation between bond lengths and the logarithm of k(ex)(298) is geochemically important because it could be used to estimate rate coefficients for geochemical materials for which only DFT calculations are possible. This molecule is the only neutral, oxo-bridged Fe(III) multimer for which rate data are available.     

Synthesis and characterization of polymer eight-coordinate (enH2)[YIII(pdta)(H2O)](2)·10H2O as well as the interaction of [YIII(pdta)(H2O)]2(2-) with BSA

The eight-coordinate (enH2)[YIII(pdta)(H2O)](2)·10H2O (en=ethylenediamine and H4pdta=1,3-propylenediamine-N,N,N',N'-tetraacetic acid) was synthesized, meanwhile its molecular and crystal structures were determined by single-crystal X-ray diffraction technology. The interaction between [Y(III)(pdta)(H2O)]2(2-) and bovine serum albumin (BSA) was investigated by UV-vis and fluorescence spectra. The results indicate that [YIII(pdta)(H2O)]2(2-) quenched effectively the intrinsic fluorescence of BSA via a static quenching process with the binding constant (Ka) of the order of 10(4). Meanwhile, the binding and damaging sites to BSA molecules were also estimated by synchronous fluorescence. Results indicate that the hydrophobic environments around Trp and Tyr residues were all slightly changed. The thermodynamic parameters (ΔG=-25.20 kJ mol(-1), ΔH=-26.57 kJ mol(-1) and ΔS=-4.58 J mol(-1) K(-1)) showed that the reaction was spontaneous and exothermic. What is more, both ΔH and ΔS were negative values indicated that hydrogen bond and Van der Waals forces were the predominant intermolecular forces between [YIII(pdta)(H2O)]2(2-) and BSA.     

Amorphous/crystalline (A/C) thermodynamic "rules of thumb": estimating standard thermodynamic data for amorphous materials using standard data for their crystalline counterparts

Standard thermochemical data (in the form of Δ(f)H° and Δ(f)G°) are available for crystalline (c) materials but rarely for their corresponding amorphous (a) counterparts. This paper establishes correlations between the sets of data for the two material forms (where known), which can then be used as a guideline for estimation of missing data. Accordingly, Δ(f)H°(a)/kJ mol(-1) ≈ 0.993Δ(f)H°(c)/kJ mol(-1) + 12.52 (R(2) = 0.9999; n = 50) and Δ(f)G°/kJ mol(-1) ≈ 0.988Δ(f)H°(c)/kJ mol(-1) + 0.70 (R(2) = 0.9999; n = 10). Much more tentatively, we propose that S°(298)(c)/J K(-1) mol(-1) ≈ 1.084S°(298)(c)/J K(-1) mol(-1) + 6.54 (R(2) = 0.9873; n = 11). An amorphous hydrate enthalpic version of the Difference Rule is also proposed (and tested) in the form [Δ(f)H°(M(p)X(q)·nH(2)O,a) - Δ(f)H°(M(p)X(q),a)]/kJ mol(-1) ≈ Θ(Hf)n ≈ -302.0n, where M(p)X(q)·nH(2)O represents an amorphous hydrate and M(p)X(q) the corresponding amorphous anhydrous parent salt.     

Synthetic and computational studies of the palladium(iv) system Pd(alkyl)(aryl)(alkynyl)(bidentate)(triflate) exhibiting selectivity in C-C reductive elimination

Synthetic routes to methyl(aryl)alkynylpalladium(iv) motifs are presented, together with studies of selectivity in carbon-carbon coupling by reductive elimination from Pd(IV) centres. The iodonium reagents IPh(C[triple bond, length as m-dash]CR)(OTf) (R = SiMe(3), Bu(t), OTf = O(3)SCF(3)) oxidise Pd(II)Me(p-Tol)(L(2)) (1-3) [L(2) = 1,2-bis(dimethylphosphino)ethane (dmpe) (1), 2,2'-bipyridine (bpy) (2), 1,10-phenanthroline (phen) (3)] in acetone-d(6) or toluene-d(9) at -80 °C to form complexes Pd(IV)(OTf)Me(p-Tol)(C[triple bond, length as m-dash]CR)(L(2)) [R = SiMe(3), L(2) = dmpe (4), bpy (5), phen (6); R = Bu(t), L(2) = dmpe (7), bpy (8), phen (9)] which reductively eliminate predominantly (>90%) p-Tol-C[triple bond, length as m-dash]CR above ～-50 °C. NMR spectra show that isomeric mixtures are present for the Pd(IV) complexes: three for dmpe complexes (4, 7), and two for bpy and phen complexes (5, 6, 8, 9), with reversible reduction in the number of isomers to two occurring between -80 °C and -60 °C observed for the dmpe complex 4 in toluene-d(8). Kinetic data for reductive elimination from Pd(IV)(OTf)Me(p-Tol)(C[triple bond, length as m-dash]CSiMe(3))(dmpe) (4) yield similar activation parameters in acetone-d(6) (66 ± 2 kJ mol(-1), ΔH(?) 64 ± 2 kJ mol(-1), ΔS(?)-67 ± 2 J K(-1) mol(-1)) and toluene-d(8) (E(a) 68 ± 3 kJ mol(-1), ΔH(?) 66 ± 3 kJ mol(-1), ΔS(?)-74 ± 3 J K(-1) mol(-1)). The reaction rate in acetone-d(6) is unaffected by addition of sodium triflate, indicative of reductive elimination without prior dissociation of triflate. DFT computational studies at the B97-D level show that the energy difference between the three isomers of 4 is small (12.6 kJ mol(-1)), and is similar to the energy difference encompassing the six potential transition state structures from these isomers leading to three feasible C-C coupling products (13.0 kJ mol(-1)). The calculations are supportive of reductive elimination occurring directly from two of the three NMR observed isomers of 4, involving lower activation energies to form p-TolC[triple bond, length as m-dash]CSiMe(3) and earlier transition states than for other products, and involving coupling of carbon atoms with higher s character of σ-bonds (sp(2) for p-Tol, sp for C[triple bond, length as m-dash]C-SiMe(3)) to form the product with the strongest C-C bond energy of the potential coupling products. Reductive elimination occurs predominantly from the isomer with Me(3)SiC[triple bond, length as m-dash]C trans to OTf. Crystal structure analyses are presented for Pd(II)Me(p-Tol)(dmpe) (1), Pd(II)Me(p-Tol)(bpy) (2), and the acetonyl complex Pd(II)Me(CH(2)COMe)(bpy) (11).     

AsS2Cl-an Arsenic(V) compound? Formation, stability and structure of gaseous AsSCl and AsS2Cl--a combined experimental and theoretical study

By reaction of solid As(4)S(4) with gaseous Cl(2) at a temperature of 410 K gaseous AsSCl and AsS(2)Cl are formed. Unexpectedly in AsS(2)Cl the arsenic is not of formal oxidation state +V but +III: the molecular structure of AsS(2)Cl is arranged as a 1-chloro-dithia-arsirane and comprises an hitherto unknown AsS(2) three-membered ring. Thermodynamic data on AsSCl and AsS(2)Cl are obtained by mass spectrometry (MS). The experimental data are extended and confirmed by ab initio quantum chemical calculations (QC). The following values are given: Δ(f)H(0)(298)(AsSCl) = -5.2 kJ mol(-1) (MS), Δ(f)H(0)(298)(AsSCl) = 1.7 kJ mol(-1) (QC), S(0)(298)(AsSCl) = 296.9 J K(-1) mol(-1) (QC) and c(p)(0)(T)(AsSCl) = 55.77 + 3.97 × 10(-3)T- 4.38 × 10(5)T(-2)- 1.83 × 10(-6)T(2) and Δ(f)H(0)(298)(AsS(2)Cl) = -39.0 kJ mol(-1) (MS), Δ(f)H(0)(298)(AsS(2)Cl) = -20.2 kJ mol(-1) (QC), S(0)(298)(AsS(2)Cl) = 321.3 J K(-1) mol(-1) (QC) and c(p)(0)(T)(AsS(2)Cl) = 80.05 + 5.09 × 10(-3)T- 7.61 × 10(5)T(-2)- 2.35 × 10(-6)T(2) (298.15 K < T < 1000 K) (QC). The ionization energies are determined (IP(AsSCl) = 10.5, IP(AsS(2)Cl) = 10.2 eV). The IR spectrum of AsSCl is detected by means of matrix isolation spectroscopy. The estimated force constant f(As=S) = 4.47 mdyn·?(-1) gives rise to an As=S double bond.     

Predicted thermochemistry and unimolecular kinetics of nitrous sulfide

The geometry of N(2)S was obtained at the CCSD(T)/aug-cc-pV(T + d)Z level of theory and energies with coupled-cluster single double triple (CCSD(T)) and basis sets up to aug-cc-pV(6 + d)Z. After correction for anharmonic zero-point energy, core-valence correlation, correlation up to CCSDT(Q) and relativistic effects, D(0) for the N-S bond is estimated as 71.9 kJ mol(-1), and the corresponding thermochemistry for N(2)S is Δ(f)H(0)(°)=205.4 kJ mol(-1) and Δ(f)H(298)(°)=202.6 kJ mol(-1) with an uncertainty of ±2.5 kJ mol(-1). Using CCSD(T)/aug-cc-pV(T + d) theory the minimum energy crossing point between singlet and triplet potential energy curves is found at r(N-N) ≈ 1.105 ? and r(N-S) ≈ 2.232 ?, with an energy 72 kJ mol(-1) above N(2) + S((3)P). Application of Troe's unimolecular formalism yields the low-pressure-limiting rate constant for dissociation of N(2)S k(0) = 7.6 × 10(-10) exp(-126 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 700-2000 K. The estimated uncertainty is a factor of 4 arising from unknown parameters for energy transfer between N(2)S and Ar or N(2) bath gas. The thermochemistry and kinetics were included in a mechanism for CO/H(2)/H(2)S oxidation and the conclusion is that little NO is produced via subsequent chemistry of NNS.     

Formation and stability of molybdenum-tellurium oxides MoTeO5, Mo2TeO8, Mo3TeO11 and MoTe2O7 in the gas phase. Quantum chemical and mass spectrometry determination of standard enthalpy of formation

The formation of mixed molybdenum-tellurium oxides MoTeO5, Mo2TeO8, Mo3TeO11, MoTe2O7 in the gas phase has been studied by mass spectrometry (MS) experiments at temperatures of about 938 K and studied theoretically by quantum chemical (QC) methods. Structural and thermodynamic data for the molecules was calculated. The mixed oxides MoTeO5, Mo2TeO8, Mo3TeO11 and MoTe2O7 in the gas phase have been reported for the first time. Experimental thermodynamic data have been determined by means of MS and confirmed theoretically by DFT and ab initio (MP2) calculations. Adiabatic ionisation potentials (IPs) were obtained experimentally and compared with theoretical vertical ionisation potentials. The following values are given: Δ(f)H(298)(0) (MoTeO5) = ?730.2 kJ mol(?1) (MS), Δ(f)H(298)(0) (MoTeO5) = ?735.4 kJ mol(?1) (DFT), ?717.3 kJ mol(?1) (MP2), S(298)(0) (MoTeO5) = 389.5 J mol(?1) K(?1) (DFT), c(p)(0)(T)(MoTeO5) = 141.71 + 13.54 × 10(?3)T ? 2.53 × 10(6)T(?2) J mol(?1) K(?1) (298 < T < 940 K) (DFT), Δ(f)H(298)(0) (Mo2TeO8) = ?1436.3 kJ mol(?1) (MS), Δ(f)H(298)(0) (Mo2TeO8) = ?1436.1 kJ mol(?1) (DFT), ?1455.9 kJ mol(?1) (MP2), S(298)(0) (Mo2TeO8) = 517.1 J mol(?1) K(?1) (DFT), c(p)(0)(T)(Mo2TeO8) = 228.64 + 24.15 × 10(?3)T ? 4.09 × 10(6)T(?2) J mol(?1) K(?1) (298 < T < 940 K) (DFT), Δ(f)H(298)(0) (Mo3TeO11) = ?2132.7 kJ mol(?1) (MS), Δ(f)H(298)(0) (Mo3TeO11) = ?2110.7 kJ mol(?1) (DFT), ?2163.2 kJ mol(?1) (MP2), S(298)(0) (Mo3TeO11) = 629.3 J mol(?1) K(?1) (DFT), c(p)(0)(T)(Mo3TeO11) = 316.40 + 34.10 × 10(?3)T ? 5.74 × 10(6)T(?2) J mol(?1) K(?1) (298 < T < 940 K) (DFT), Δ(f)H(298)(0) (MoTe2O7) = ?999.7 kJ mol(?1) (MS), Δ(f)H(298)(0) (MoTe2O7) = ?1002.7 kJ mol(?1) (DFT), ?1000.9 kJ mol(?1) (MP2), S(298)(0) (MoTe2O7) = 504.8 J mol(?1) K(?1) (DFT), c(p)(0)(T)(MoTe2O7) = 211.19 + 18.02 × 10(?3)T ? 3.53 × 10(6)T(?2) J mol(?1) K(?1) (298 < T < 940 K) (DFT), IP(MoTeO5) = 10.68 eV (DFT), IP(Mo2TeO8) = 10.4 ± 0.5 eV (MS), IP(Mo2TeO8) = 10.41 eV (DFT), IP(Mo3TeO11) = 10.7 ± 0.5 eV (MS), IP(Mo3TeO11) = 10.18 eV (DFT), IP(MoTe2O7) = 9.91 eV (DFT).     

Thermodynamic investigations of methyl tert-butyl ether and water mixtures

Interactions between methyl tert-butyl ether (MTBE) and water have been investigated by scanning calorimetry, isothermal titration calorimetry, densitometry, IR-spectroscopy, and gas chromatography. The solubilization of MTBE in water at 25 °C at infinite dilution has ΔH° = -17.0 ± 0.6 kJ mol(-1); ΔS° = -80 ± 2 J mol(-1) K(-1); ΔC(p) = +332 ± 15 J mol(-1) K(-1); ΔV° = -18 ± 2 cm(3) mol(-1). The signs of these thermodynamic functions are consistent with hydrophobic interactions. The occurrence of hydrophobic interaction is further substantiated as IR absorption spectra of MTBE-water mixtures show that MTBE strengthens the hydrogen bond network of water. Solubilization of MTBE in water is exothermic whereas solubilization of water in MTBE is endothermic with ΔH° = +5.3 ± 0.6 kJ mol(-1). The negative mixing volume is explained by a large negative contribution due to size differences between water and MTBE and by a positive contribution due to changes in the water structure around MTBE. Henry's law constants, K(H), were determined from vapor pressure measurements of mixtures equilibrated at different temperatures. A van't Hoff analysis of K(H) gave ΔH(H)° = 50 ± 1 kJ mol(-1) and ΔS(H)° = 166 ± 5 J mol(-1) K(-1) for the solution to gas transfer. MTBE is excluded from the ice phase water upon freezing MTBE-water mixtures.     

Oxygen atom transfer from a trans-dioxoruthenium(VI) complex to nitric oxide

In aqueous acidic solutions trans-[Ru(VI)(L)(O)(2)](2+) (L=1,12-dimethyl-3,4:9,10-dibenzo-1,12-diaza-5,8-dioxacyclopentadecane) is rapidly reduced by excess NO to give trans-[Ru(L)(NO)(OH)](2+). When ≤1 mol equiv NO is used, the intermediate Ru(IV) species, trans-[Ru(IV)(L)(O)(OH(2))](2+), can be detected. The reaction of [Ru(VI)(L)(O)(2)](2+) with NO is first order with respect to [Ru(VI)] and [NO], k(2)=(4.13±0.21)×10(1) M(-1) s(-1) at 298.0 K. ΔH(≠) and ΔS(≠) are (12.0±0.3) kcal mol(-1) and -(11±1) cal mol(-1) K(-1), respectively. In CH(3)CN, ΔH(≠) and ΔS(≠) have the same values as in H(2)O; this suggests that the mechanism is the same in both solvents. In CH(3)CN, the reaction of [Ru(VI)(L)(O)(2)](2+) with NO produces a blue-green species with λ(max) at approximately 650 nm, which is characteristic of N(2)O(3). N(2)O(3) is formed by coupling of NO(2) with excess NO; it is relatively stable in CH(3)CN, but undergoes rapid hydrolysis in H(2)O. A mechanism that involves oxygen atom transfer from [Ru(VI)(L)(O)(2)](2+) to NO to produce NO(2) is proposed. The kinetics of the reaction of [Ru(IV)(L)(O)(OH(2))](2+) with NO has also been investigated. In this case, the data are consistent with initial one-electron O(-) transfer from Ru(IV) to NO to produce the nitrito species [Ru(III)(L)(ONO)(OH(2))](2+) (k(2)>10(6) M(-1) s(-1)), followed by a reaction with another molecule of NO to give [Ru(L)(NO)(OH)](2+) and NO(2)(-) (k(2)=54.7 M(-1) s(-1)).     

7Li NMR studies on complexation reactions of lithium ion with cryptand C211 in ionic liquids: comparison with corresponding reactions in nonaqueous solvents

(7)Li NMR spectra of DEME-TFSA [DEME=N,N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium; TFSA=bis(trifluoromethanesulfonyl)amide], EMI-TFSA (EMI=1-ethyl-3-methylimidazolium), MPP-TFSA (MPP = N-methyl-N-propylpyridinium), DEME-PFSA [PFSA=bis(pentafluoroethanesulfonyl)amide], and DEME-HFSA [HFSA=bis(heptafluoropropanesulfonyl)amide] ionic liquid (IL) solutions containing LiX (X=TFSA, PFSA, or HFSA) and C211 (4,7,13,18-tetraoxa-1,10-diazabicyclo[8.5.5]eicosane) were measured at various temperatures. As a result, it was found that the uncomplexed Li(I) species existing as [Li(X)(2)](-) in the present ILs exchange with the complexed Li(I) ([Li·C211](+)) and that the exchange reactions proceed through the bimolecular mechanism, [Li·C211](+) + [*Li(X)(2)](-)=[*Li·C211](+) + [Li(X)(2)](-). Kinetic parameters [k(s)/(kg m(-1) s(-1)) at 25 °C, ΔH(++)/(kJ mol(-1)), ΔS(++)/(J K(-1) mol(-1))] are as follows: 5.57×10(-2), 69.8 ± 0.4, and -34.9 ± 1.0 for the DEME-TFSA system; 5.77×10(-2), 70.6 ± 0.2, and -31.9 ± 0.6 for the EMI-TFSA system, 6.13×10(-2), 69.0 ± 0.3, and -36.7 ± 0.7 for the MPP-TFSA system; 1.35 × 10(-1), 65.2 ± 0.5, and -43.1 ± 1.4 for the DEME-PFSA system; 1.14×10(-1), 64.4 ± 0.3, and -47.1 ± 0.6 for the DEME-HFSA system. To compare these kinetic data with those in conventional nonaqueous solvents, the exchange reactions of Li(I) between [Li·C211](+) and solvated Li(I) in N,N-dimethylformamide (DMF) and dimethyl sulfoxide (DMSO) were also examined. These Li(I) exchange reactions were found to be independent of the concentrations of the solvated Li(I) and hence proposed to proceed through the dissociative mechanism. Kinetic parameters [k(s)/s(-1) at 25 °C, ΔH(++)/(kJ mol(-1)), ΔS(++)/(J K(-1) mol(-1))] are as follows: 1.10 × 10(-2), 68.9 ± 0.2, and -51.3 ± 0.4 for the DMF system; 1.13×10(-2), 76.3 ± 0.3, and -26.3 ± 0.8 for the DMSO system. The differences in reactivities between ILs and nonaqueous solvents were proposed to be attributed to those in the chemical forms of the uncomplexed Li(I) species, i.e., the negatively charged species ([Li(X)(2)](-)) in ILs, and the positively charged ones ([Li(solvent)(n)](+)) in nonaqueous solvents.     

Structure and dynamics of binary and ternary lanthanide(III) and actinide(III) tris[4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedione] (TTA) complexes. Part 2, the structure and dynamics of binary and ternary complexes in the Y(III)/Eu(III)-TTA-tributylphosphate (TBP) system in chloroform as studied by NMR spectroscopy

The stoichiometric reaction mechanisms, rate constants and activation parameters for inter- and intramolecular ligand exchange reactions in the binary Y/Eu(TTA)(3)(OH(2))(2)-HTTA and the ternary Y/Eu(TTA)(3)(OH(2))(2)-TBP systems have been studied in chloroform using (1)H and (31)P NMR methods. Most complexes contain coordinated water that is in very fast exchange with water in the chloroform solvent. The exchange reactions involving TTA/HTTA and TBP are also fast, but can be studied at lower temperature. The rate constant and activation parameters for the intramolecular exchange between two structure isomers in Y(TTA)(3)(OH(2))(2) and Y(TTA)(3)(TBP)(OH(2)) were determined from the line-broadening of the methine protons in coordinated TTA. The rate equations for the intermolecular exchange between coordinated TTA and free HTTA in both complexes are consistent with a two-step mechanism where the first step is a fast complex formation of HTTA, followed by a rate determining step involving proton transfer from coordinated HTTA to TTA. The rate constants for both the inter- and intramolecular exchange reactions are significantly smaller in the TBP system. The same is true for the activation parameters in the Y(TTA)(3)(OH(2))(2)-HTTA and the ternary Y/Eu(TTA)(3)(TBP)(OH(2))-HTTA systems, which are ΔH(≠) = 71.8 ± 2.8 kJ mol(-1), ΔS(≠) = 62.4 ± 10.3 J mol(-1) K(-1) and ΔH(≠) = 38.8 ± 0.6 kJ mol(-1), ΔS(≠) = -93.0 ± 3.3 J mol(-1) K(-1), respectively. The large difference in the activation parameters does not seem to be related to a difference in mechanism as judged by the rate equation; this point will be discussed in a following communication. The rate and mechanism for the exchange between free and coordinated TBP follows a two-step mechanism, involving the formation of Y(TTA)(3)(TBP)(2).     

Tuning the reactivity in classic low-spin d6 rhenium(I) tricarbonyl radiopharmaceutical synthon by selective bidentate ligand variation (L,L'-Bid; L,L'= N,N', N,O, and O,O' donor atom sets) in fac-[Re(CO)3(L,L'-Bid)(MeOH)]n complexes

A range of fac-[Re(CO)(3)(L,L'-Bid)(H(2)O)](n) (L,L'-Bid = neutral or monoanionic bidentate ligands with varied L,L' donor atoms, N,N', N,O, or O,O': 1,10-phenanthroline, 2,2'-bipydine, 2-picolinate, 2-quinolinate, 2,4-dipicolinate, 2,4-diquinolinate, tribromotropolonate, and hydroxyflavonate; n = 0, +1) has been synthesized and the aqua/methanol substitution has been investigated. The complexes were characterized by UV-vis, IR and NMR spectroscopy and X-ray crystallographic studies of the compounds fac-[Re(CO)(3)(Phen)(H(2)O)]NO(3)·0.5Phen, fac-[Re(CO)(3)(2,4-dQuinH)(H(2)O)]·H(2)O, fac-[Re(CO)(3)(2,4-dQuinH)Py]Py, and fac-[Re(CO)(3)(Flav)(CH(3)OH)]·CH(3)OH are reported. A four order-of-magnitude of activation for the methanol substitution is induced as manifested by the second order rate constants with (N,N'-Bid) < (N,O-Bid) < (O,O'-Bid). Forward and reverse rate and stability constants from slow and stopped-flow UV/vis measurements (k(1), M(-1) s(-1); k(-1), s(-1); K(1), M(-1)) for bromide anions as entering nucleophile are as follows: fac-[Re(CO)(3)(Phen)(MeOH)](+) (50 ± 3) × 10(-3), (5.9 ± 0.3) × 10(-4), 84 ± 7; fac-[Re(CO)(3)(2,4-dPicoH)(MeOH)] (15.7 ± 0.2) × 10(-3), (6.3 ± 0.8) × 10(-4), 25 ± 3; fac-[Re(CO)(3)(TropBr(3))(MeOH)] (7.06 ± 0.04) × 10(-2), (4 ± 1) × 10(-3), 18 ± 4; fac-[Re(CO)(3)(Flav)(MeOH)] 7.2 ± 0.3, 3.17 ± 0.09, 2.5 ± 2. Activation parameters (ΔH(k1)(++), kJmol(-1); ΔS(k1)(), J K(-1) mol(-1)) from Eyring plots for entering nucleophiles as indicated are as follows: fac-[Re(CO)(3)(Phen)(MeOH)](+) iodide 70 ± 1, -35 ± 3; fac-[Re(CO)(3)(2,4-dPico)(MeOH)] bromide 80.8 ± 6, -8 ± 2; fac-[Re(CO)(3)(Flav)(MeOH)] bromide 52 ± 5, -52 ± 15. A dissociative interchange mechanism is proposed.     

Anion exchange reaction potentials as approximate estimates of the relative thermodynamic stabilities of Mg/Al layered double hydroxides containing different anions

Coatings of hydrotalcite-like nitrate-intercalated Mg/Al layered double hydroxides are electrochemically deposited on a Pt electrode by electrogeneration of base by reduction of a mixed metal nitrate aqueous solution. As-prepared coatings are stable to workup and function as rugged electrodes. The voltammetric response generated by anion exchange of intercalated nitrate for dissolved anions from solution under equilibrium conditions is employed to estimate the thermodynamic stabilities of the Mg/Al layered double hydroxides comprising different anions relative to the nitrate-containing phase. Among monovalent anions, the most stable is the fluoride-containing LDH (ΔG° = -48.7 kJ mol(-1)) relative to the nitrate-containing LDH. The stability in aqueous phase decreases as F(-) > Cl(-) > Br(-) > NO(2)(-) > NO(3)(-), whereas, among divalent anions, SO(4)(2-) (ΔG° = -8.7 kJ mol(-1)) > CO(3)(2-) (ΔG° = 14.3 kJ mol(-1)). The results of monovalent ions match well with the Miyata series, whereas the divalent anion series is at variance with the commonly held belief that carbonate-LDHs are more stable than sulfate-LDHs.