Die Kristallstruktur des W3CoB3 und der dazu isotypen Phasen Mo3CoB3, Mo3NiB3 und W3NiB3

Zusammenfassung Mo₃CoB₃, Mo₃NiB₃, W₃CoB₃ und W₃NiB₃ kristallisieren in einem eigenen Typ (W₃CoB₃-Struktur). Das trigonal prismatische Bauelement [T ₆B]^* ist zu Ketten vereinigt, wobei B₃-Gruppen entstehen. Die Phasen sind vermutlich Bor-reicher als obiger Formel entspricht.

---

The crystal structure of W₃CoB₃ and the isotypic phases Mo₃CoB₃, Mo₃NiB₃, and W₃NiB₃

Mo₃CoB₃, Mo₃NiB₃, W₃CoB₃, and W₃NiB₃ were found to possess a new type of crystal structure (W₃CoB₃-structure type). Trigonal prismatic groups [T ₆B]^* are linked together forming chains in such a way that B₃-groups occur. These borides do probably exist with a larger amount of boron as to compared with the formula.

---

---

Mit 2 Abbildungen     

Synthesis of γγγ-trifluorocarbonyl compounds

γγγ-Trifluorocarbonyl compounds are easily obtained in a good yield by introduction of the 1,1,1-trifluoroethyl moiety (CF₃-CH₂-) on the -methylene group of a ketone.     

γ-Nitro-γ-butyrolacton

γ-Nitro-γ-butyrolactone By oxidation of 3-(1-nitro-2-oxocyclohexyl)propanal ( 1 ) with KMnO₄, besides 3-(1′-nitro-2′-oxocyclohexyl)pripionic acid ( 2 ), the complete hydrolysis product 4-oxononanedioic acid ( 4 ) and the oxidized semi-hydrolysis product 5-(2-nitro-5-oxotetrahydro-2-furyl)pentanoic acid ( 3 ) were formed. The crystalline 3 decomposes at r.t. forming 4 and nitrous gases; its structure was established by X-ray determination.     

Freezing the polarization of CH3NH3PbI3 and CH3NH3PbI3-xClx perovskite films

Thin films of methylammonium lead halides, CH₃NH₃PbI₃ and CH₃NH₃PbI_3-xCl_x, were deposited onto symmetrical microstructured electrode arrays of gold or platinum on Si/SiO₂ wafers. Polarization studies were carried out on perovskite films under vacuum in the dark. For poling, a constant voltage was applied to the samples while the temperature was cycled between 295 K and 4 K. The measured current densities depending on the temperature showed distinct characteristics relating strongly to the crystal phase and the dielectric properties of the perovskite films. Voltage sweeps were carried out at different scan rates at specific temperature intervals after poling. The polarization of the films due to the migration of iodide vacancies in direction of the blocking perovskite/metal interface was frozen almost up to room temperature. Charge carriers were only able to cross the blocking barrier and contribute to the current where the ions have accumulated during poling. All J-V curves showed hysteresis: inverted and regular hysteresis at room temperature and below, respectively. Inverted hysteresis originates from the slow accumulation of ions at the blocking barrier, while regular hysteresis arises from a distortion in the adjacent crystals which will be discussed.     

K3BiSe3, Rb3BiSe3 und Cs3BiSe3 – Substitutionsvarianten des Th3P4-Typs

K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃ – Derivatives of the Th₃P₄ Structure Type The compounds K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃ were synthesized by heating mixtures of Bi₂O₃ and the respective alkalicarbonate in a stream of hydrogen saturated by selenium at 850°C. Thin crystals of the compounds appear red in transmitted light. They crystallize isostructural with Na₃AsS₃, space group P2₁3, lattice constants a = 9.771(5) Å, a = 10.161(3) Å, and a = 10.587(5) Å for K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃, respectively. The Na₃AsS₃ structure type is a derivative of the Th₃P₄ structure type.     

3x-pyrrolizin-3-ones

Condensation of pyrrole-2-dithiocarboxylates with CH acids containing ester groups, in the KOH-DMSO system, was used to prepare previously unknown 1-alkylthio-3H pyrrolizin-3-ones. The latter, treated with secondary amines, are readily converted to the corresponding 1-amino derivatives.     

3-H-pyrrolizin-3-ones

Previously unknown 1-alkylthio-3H-pyrrolizin-3-ones have been obtained by the condensation of pyrrole-2-dithiocarboxylates with CH acids containing ester groupings in the KOH-DMSO system. On treating the products with secondary amines they are readily converted into the corresponding 1-amino derivatives.Irkutsk Branch of the Russian Academy of Sciences, Irkutsk 664033. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 919–924, July, 1996. Original article submitted May 2, 1996.     

Synthesis of some derivatives of 3-amino-3-desoxyerythrose and 3-amino-3-desoxy-D-3-erythrose

The synthesis of derivatives of 3-amino-3-deoxy-L-erythrose by LAH or LAD reduction of the oxime of 1,2-O-isopropylidene α-L -glycero-tetros-3-ulofuranose is described.     

Die Akzeptoreigenschaften von AsCl3, AsBr3, asJ3, SbCl3, SbBr3 und SbJ3

Zusammenfassung Es wurden die Enthalpien der Reaktionen von AsCl₃, AsBr₃, AsJ₃, SbCl₃, SbBr₃ und SbJ₃ mit Tributylphosphat, N,N-Dimethylacetamid und Hexamethylphosphorsäuretriamid bestimmt. Das Verhalten der Addukte bei Gegenwart eines Überschusses der Donoren wird beschrieben.

---

Acceptor properties of AsCl₃, AsBr₃, AsI₃, SbCl₃, SbBr₃, and SbI₃

The enthalpies of the reactions of AsCl₃, AsBr₃, AsI₃, SbCl₃, SbBr₃ and SbI₃ with tributylphosphate, N,N-dimethylacetamide and hexamethylphosphoric acid triamide were measured. The behavior of the adducts in the presence of excess donor molecules is described.

---

---

Mit 5 Abbildungen     

3-cyclobutyl-3-ferrocenylcyclopropene and 3-cyclobutylidene-3-ferrocenylpropyne Synthesis and chemical properties

3-Cyclobutyl-3-ferrocenylcyclopropene was synthesized by the reactions of mono- or dibromoferrocenylcyclopropanes with Bu^tOK in DMSO. Treatment of dibromoferro-cenylcyclopropane with Bu^tOK in THF afforded 3-cyclobutylidene-3-ferrocenylpropyne in 52% yield. Heterolysis of the C-C bond in the three-membered ring of 3-cyclobutyl-3-ferrocenylcyclopropene at low and high temperatures was studied. Hydrolysis yielded 3-cyclobutyl-1H-cyclopentaferrocene and products with linear structures,viz., 3-cyclobutylidene-3-ferrocenylpropene,E- andZ-I-ferrocenyl-1-cyclobutylpropenes, and 1-cyclobutylidene-1-ferrocenylacetone. Cyclopropene reacts with 1,3-diphenylisobenzofuran to form two Diels-Alder adducts, while the enyne does not react with 1,3-diphenylbenzofuran. Facultad de Quimica, Universidad Nacional Autónoma de México, Cd. Universitaria, C.P. 04510, México D. F., México. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2177–2181, November, 1999.     

Hydrocarbon species mu3-CCH2-, mu3-CCH3 and mu-CHCH3 supported on Ti3O3

Treatment of the mu3-ethylidyne complex [{TiCp*(mu-O)}3(mu3-CMe)](1), (Cp*=eta5-C5Me5) with alkali metal amides leads to the oxoheterometallocubane derivatives [M(mu3-O)3{(TiCp*)3(mu3-CCH2)}] [M = Li (2), Na (3), K (4), Rb (5), Cs (6)] containing the naked carbanion mu3-CCH2-; the addition of triphenylmethanol and tert-butanol to the compounds 2-6 gives rise to the oxoderivatives [{TiCp*(mu-O)}3(mu-CHMe)(OCR3)][R = Me (7), Ph (8)] which show a mu-ethylidene bridge on the surface model Ti3O3.     

Synthesis and Upconversion Luminescence in LaF3:Yb3+, Ho3+, GdF3: Yb3+, Tm3+ and YF3:Yb3+, Er3+ obtained from Sulfide Precursors

Rare earth fluorides are mainly obtained from aqueous solutions of oxygen‐containing precursors. Probably, this method is simple and efficient, however, oxygen may partially be retained in the fluoride structure. We offer an alternative method: obtaining fluorides and solid solutions based on them from an oxygen‐free precursor. As starting materials, we choose sulfides of rare‐earth elements and solid solutions based on them. The fluorination is carried out by exposure to hydrofluoric acid of various concentrations. The transmission electron microscopy images revealed the different morphologies of the products, which depend on the concentration of the fluorinating component (HF) and the host element. The solid solution particle size varied from 30–35 nm in the case of GdF₃:Yb³⁺, Tm³⁺ (4 % HF) to larger structures with dimensions exceeding 200 nm, such as that for LaF₃:Yb³⁺, Ho³⁺ (40 % HF). The thermal characteristics, such as the temperatures of the transitions and melting and enthalpies, were determined for the solid solutions and simple fluorides. Applicability of the materials obtained as biological luminescent markers was tested on the example of upconversion luminescence, and good upconversion properties were detected.     

Die Perthioborate RbBS3, TIBS3 und TI3B3S10

The Perthioborates RbBS₃, TIBS₃, and Tl₃B₃S₁₀ . RbBS₃ (P2₁/c, a=7.082(2) Å, b=11.863(4) Å, c=5.794(2) Å, β=106.54(2)°) was prepared as colourless, plate-shaped crystals by reaction of stoichiometric amounts of rubidium sulfide, boron, and sulfur at 600°C and subsequent annealing. TlBS₃ (P2₁/c, a=6.874(3) Å, b=11.739(3) Å, c=5.775(2) Å, β=113.08(2)°) which is isotypic with RbBS₃ was synthesized from a sample of the composition Tl₂S · 2 B₂S₃. The glassy product which was obtained after 7 h at 850°C was annealed in a two zone furnace for 400 h at 400→350°C. Yellow crystals of TlBS₃ formed at the warmer side of the furnace. Tl₃B₃S₁₀ (P1 , a=6.828(2) Å, b=7.713(2) Å, c=13.769(5) Å, α=104.32(2)°, β=94.03(3)°, γ=94.69(2)°) was prepared as yellow plates from stoichiometric amounts of thallium sulfide, boron, and sulfur at 850°C and subsequent annealing. All compounds contain tetrahedrally coordinated boron. The crystal structures consist of polymeric anion chains. In the case of RbBS₃ and TlBS₃ nonplanar five-membered B₂S₃ rings are spirocyclically connected via the boron atoms. To obtain the anionic structure of Tl₃B₃S₁₀ every third B₂S₃ ring of the polymeric chains of MBS₃ is to be substituted by a six-membered B(S₂)₂B ring.     

Non-Isothermal Kinetics of the Decomposition Reaction of Cluster [Ag3WS3Br]（PPh3）3 and [Cu3WS3Br]（PPh3）3

The thermal behaviors of clusters [Ag3WS3Br](PPh3)3 and [Cu3WS3Br](PPh3)3 (PPh3=triphenyl phosphine) in a nitrogen atmosphere were studied under the non-isothermal conditions by simultaneous TG-DTG-DSC and EDS techniques. The results showed that the evolution of PPh3 generally proceeded before the release of the other moiety in one or two step-mode. The mechanisms, the kinetic and the thermodynamic parameters for decomposition of PPh3 of both clusters were determined and calculated by jointly using several methods, which showed that its evolution was controlled by Avrami-Erofeev equation. The results also showed that there was no new stable phase composed of W-Ag(Cu)-S-Br after release of organic moiety PPh3 and that CVD method was not applicable to their further processing.