TiSiW12O40/TiO2催化合成苹果酯

以固载杂多酸盐TiSiW12O40/TiO2为多相催化剂，通过乙酰乙酸乙酯和乙二醇反应合成了苹果酯，探讨TiSiW12O40/TiO2对缩酮反应的催化活性，较系统地研究了原料量比，催化剂肜量，反应时间诸因素对产品收率的影响，实验表明：TiSiW12O40/TiO2是合成苹果酯的良好催化剂，在n(乙酰乙酸乙酯）：n(乙二醇）＝1：1．5，催化剂用量为反应物料总质量的1．0％，环己烷为带水剂，反应时间50min的优化条件下，苹果酯的收率可达84．1％。     

环境友好催化剂TiSiW12O40/TiO2的制备及其催化性能研究

制备了新型固载杂多酸盐TiSiW12O40/TiO2环境友好催化剂,并以丁酸丁酯的合成作为探针反应,系统考察了原料H4SiW12O40@xH2O与TiO2摩尔比、焙烧温度、焙烧时间等制备条件对TiSiW12O40/TiO2催化活性的影响.实验表明:制备催化剂的适宜条件为原料H4SiW12O40@xH2O与TiO2摩尔比为0.47,焙烧温度为350℃,焙烧时间为3.0 h.利用该条件下制备的催化剂TiSiW12O40/TiO2合成丁酸丁酯,正丁醇与正丁酸的投料摩尔比n(醇):n(酸)=1.3:1,催化剂的用量占反应物总投料质量的1.3%,反应时间为1 h,丁酸丁酯的产率为97.2%.该催化剂TiSiW12O40/TiO2用于制备其它丁酸酯类(如乙酯、丙酯、戊酯、异戊酯)时同样取得了好的结果.     

TiSiW12O40／TiO2催化合成苯甲酸酯

首次报道了以固载杂多酸盐TiSiW12O40/TiO2为催化剂,对以丙醇、丁醇、正戊醇、异戊醇和苯甲酸为原料,合成相应苯甲酸酸的反应条件进行了研究。实验表明,TiSiW12O40/TiO2是合成苯甲酸酯的良好催化剂,最佳反应条件为：醇酸摩尔比为4：1,催化剂用量为反应物料总质量的1.5%,反应时间为2.5h。在此条件下,苯甲酸丙酯及苯甲酸正丁酯的产率分别为70.5%及75.6%,苯甲酸戊酯和苯甲酸异戊酯的产率分别达96.7%和83.3%。     

固载杂多酸盐催化合成苯甲酸正戊酯

首次报道了以固载杂多酸盐TiSiW12 O4 0 /TiO2 为多相催化剂 ,对以苯甲酸和正戊醇为原料合成苯甲酸正戊酯的反应条件进行了研究 .实验表明 :TiSiW12 O4 0 /TiO2 是合成苯甲酸正戊酯的良好催化剂 .最佳反应条件为 :醇酸物质量比为 4∶1,催化剂用量为反应物料总量的 1.5 % ,反应时间为 2 .5h .上述条件下 ,苯甲酸正戊酯的产率可达 96 .7% .     

TiSiW12O40／TiO2催化合成葡萄糖五丁酸酯的研究

首次报道了新型催化剂TiSiW12O40/TiO2催化酯化合成葡萄五丁酸酯,考察了糖酸比、催化剂用量、反应时间、反应温度诸因素对产率的影响。实验表明,TiSiW12O40/TiO2是合成葡萄糖五丁酸酯的良好催化剂。最佳反应条件为：糖酸摩尔比1：6,催化剂的用量为反应物料总量的2.0%,酯化反应时间为2.0h,反应温度90-95℃。反应产率可达85.4%。     

TiSiW12O40/TiO2催化合成乙酸环己酯

以固载杂多酸TiSiWl2O40／TiO2催化乙酸和环己醇合成了乙酸环己酯。实验确定最佳反应条件为：n(乙酸)：n(环己醇)=1．0：1．1，TiSiW12O40／TiO2用量为乙酸质量的5％，反应时间1．5h，酯化率达95．5％。     

用固载强酸TiO2/SO42-催化甲基紫罗兰酮合成中的环化反应

研究了以固载强酸TiO2/SO4^2-作催化剂，用假性异甲基紫罗兰酮环化合成甲基紫罗兰酮的新方法，提高了α－异甲基紫罗兰酮的收率，获得了最佳反应条件;投料比n(假性异甲基紫罗兰酮）：n（甲苯）：n(硫酸）＝1：3．5：0．04，控制反应温度15－25℃，反应时间1．5h，该优化条件下，合成收率为93％－94％，产物中α－异甲基紫罗兰酮占78（wt)%左右。     

TiSiW12O40/TiO2催化合成丙酸乙酯

以自制的固载杂多酸(盐)TiSiW12O40／TiO2为复相催化剂，通过丙酸和无水乙醇反应合成了丙酸乙酯，探讨了诸因素对酯化率的影响，结果表明，在最佳反应条件下，收率可达78．1％。     

H4 SiW12 O40 /C催化合成丁酮1,2-丙二醇缩酮

以丁酮和1,2-丙二醇为原料,活性炭负载硅钨酸（H4SiW12O40／C）为催化剂,催化合成了丁酮1,2-丙二醇缩酮。正交试验筛选出最佳反应条件为：丁酮200mmol,n（丁酮）：n（1,2-丙二醇）=1．0：1．4,ω（催化剂）=1．2％（以反应物质量计）,反应时间1h。在此最佳反应条件下,丁酮1,2-丙二醇缩酮的收率可达71．13％。     

环境友好催化剂TiSiW_(12)O_(40j)/TiO_2的制备及其催化性能研究

制备了新型固载杂多酸盐TiSiW_(12)O_(40)/TiO_2环境友好催化剂，并以丁酸 丁酯的合成作为探针反应，系统考察了原料H_4SiW_(12)O_(40)·xH_2O与TiO_2摩 尔比、焙烧温度、焙烧时间等制备条件对TiSiW_(12)O_(40)/TiO_2催化活性的影响 。实验表明：制备催化剂的适宜条件为原料H_4SiW_(12)O_(40)·xH_2O与TiO_2摩 尔比为0.47，焙烧温度为350 ℃，焙烧时间为3.0 h。利用该条件下制备的催化剂 TiSiW_(12)O_(40)/TiO_2合成了丁酸丁酯正丁醇与正丁醇的投料摩尔比n(醇):n(酸 ) = 1.3:1，催化剂的用量占反应物总投料质量的1.3%，反应时间为1 h，丁酸丁酯 的产率为97.2%。该催化剂TiSiW_(12)O_(40)/TiO_2用于制备其它丁酸酯类（如乙 酯、丙酯、戊酯、异戊酯）时同样取得了好的结果。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.