含氟丙烯酸酯-苯乙烯共聚物的制备及其表面性能的研究

研究了聚合工艺、含氟丙烯酸酯类单体种类和用量、苯乙烯和自由基引发剂用量及硅烷偶联剂、催化剂等因素对含氟丙烯酸酯-乙烯共聚物表面性能的影响。结果表明：聚合工艺、含氟丙烯酸酯类单体种类和用量对共聚物表面的憎水性能有显著的影响;采用延时滴加含氟丙烯酸酯类单体可提高共聚物膜表面的憎水性;随含氟丙烯酸酯类单体侧链含氟烷基的链长和氟原子数及含氟单体用量的增加,共聚物水接触角增大,吸水率下降;共聚物薄膜的硬度则与含氟丙烯酸酯类单体中α-取代基、侧链含氟烷基的链长和用量、苯乙烯用量、引发剂浓度等相关;硅烷偶联剂和催化交联剂的加入可提高共聚物薄膜的强度。     

超临界二氧化碳中聚合体系的发展与新型功能高分子材料的制备

因拥有诸多特性,超临界二氧化碳作为聚合反应介质受到了学术界和工业界的广泛关注。近十余年来,超临界二氧化碳中聚合体系的研究有了新的进展,反应介质由单一二氧化碳发展为二氧化碳/水或二氧化碳/有机溶剂复合物,得益于连续搅拌反应装置的出现,聚合方式由间歇式发展为连续式。同时,在超临界二氧化碳中制备得到了多种新型功能高分子材料,例如含氟塑料、含氟弹性体、核壳复合材料、多孔材料以及膜材料,显示出传统溶剂无法比拟的优越性。本文对以上两方面作一介绍和评述。     

New Polymerization Systems in Supercriticai Carbon Dioxide and Related Functional Polymer Materials

因拥有诸多特性,超临界二氧化碳作为聚合反应介质受到了学术界和工业界的广泛关注。近十余年来,超临界二氧化碳中聚合体系的研究有了新的进展,反应介质由单一二氧化碳发展为二氧化碳／水或二氧化碳／有机溶剂复合物,得益于连续搅拌反应装置的出现,聚合方式由间歇式发展为连续式。同时,在超临界二氧化碳中制备得到了多种新型功能高分子材料,例如含氟塑料、含氟弹性体、核壳复合材料、多孔材料以及膜材料,显示出传统溶剂无法比拟的优越性。本文对以上两方面作一介绍和评述。     

超临界二氧化碳光聚合制备可交联含氟聚合物颗粒及应用

通过自由基无规共聚和酰化反应两步法制备了两类侧链含丙烯酸酯双键的含氟低聚物,并通过调节反应物种类、配比和链转移剂用量,制备出一系列不同双键含量、氟含量的多官能度低聚物。以制备的含氟低聚物为原料,进行超临界二氧化碳光聚合制粒。聚合得到的含氟颗粒作为增强相,加入TPGDA光固化配方中,可实现颗粒与树脂的化学交联,显著提高基材的交联密度,改善疏水性,降低吸水率,并增强热稳定性。     

含氟丙烯酸酯共聚物防粘剂的制备及其表面性能研究

以甲基异丁基甲酮为溶剂,偶氮二异丁腈为引发剂,全氟烷基乙基丙烯酸酯、丙烯酸十八酯、丙烯酸丁酯和甲基丙烯酸羟乙酯为原料,溶液聚合制得了均一的含氟丙烯酸酯共聚物防粘剂,并研究了其表面性能。结果表明:全氟烷基乙基丙烯酸酯单体的加入显著降低了共聚物的表面能,提高了共聚物膜的硬度、耐水、耐碱、耐溶剂等性能。当加入ω(氟单体)为30%时,表面能降低至14.7 mN/m,低于有机硅类防粘剂的表面能,含氟丙烯酸酯共聚物膜与压敏胶的的剥离力较低,剩余粘附率为93.2%,该共聚物膜的防粘等综合性能最好。     

超临界CO2中的高分子合成研究进展

本文介绍以超临界CO₂流体为介质的高分子合成的研究进展。说明可在超临界二氧化碳中实施氟代单体的自由基溶液聚合、甲基丙烯酸甲酯和苯乙烯的分散聚合、丙烯酸的沉淀聚合、丙烯酰胺的反相乳液聚合以及异丁基乙烯基醚的阳离子聚合等多种聚合反应。这显示出超临界CO₂是一种对环境无污染且价廉的替代溶剂。     

聚乙二醇双丙烯酸酯在超临界二氧化碳中的光聚合研究

探索了聚乙二醇双丙烯酸酯在超临界二氧化碳中发生光聚合反应制备聚合物颗粒的过程.方法为向充满超临界二氧化碳的高压反应釜中,同时喷射二氧化碳与聚乙二醇双丙烯酸酯及光引发剂的溶液,溶液与二氧化碳形成均匀的喷雾并进一步通过反溶剂作用与超临界二氧化碳形成分散体系,当同步进行紫外光照射时,单体可以在超临界二氧化碳中发生光聚合.结果证明此方法是可行的,得到了聚合物微颗粒.研究了不同溶剂及反应原料用量对产物粒径分布的影响.采用不同溶剂,将改变反应原料及产物在超临界二氧化碳中的溶解度,进而改变产物的粒径分布;反应原料用量增加,其在超临界二氧化碳中的溶解度减小,导致产物粒径分布较宽。     

氟烯烃的活性/可控自由基聚合研究进展

含氟聚合物具有优异而独特的性能,主要是通过氟烯烃的聚合反应合成的。自从上世纪90年代以来,活性/可控自由基聚合反应获得极大的进展,发展了多种活性自由基聚合的方法,为聚合物的精确设计、合成提供了强有力的手段。氟烯烃的活性/可控自由基聚合反应研究始于上世纪70年代,碘转移聚合已经成功地应用于含氟热塑性弹性体的商业化生产。文献已经报道的氟烯烃活性/可控自由基聚合反应包括碘转移聚合(ITP)、烷基硼自由基聚合、原子转移自由基聚合(ATRP)和可逆加成断裂链转移聚合(RAFT)或黄原酸酯交换法(MADIX)等。通过这些方法可以制备出分子量确定、结构多样化的含氟聚合物,如嵌段、接枝和遥爪聚合物等,使含氟聚合物的应用范围得到进一步拓展。本文结合本课题组的研究工作,对氟烯烃活性/可控自由基聚合反应的研究进展进行了简要综述。     

超临界CO2在高分子合成与制备中的应用

介绍超临界二氧化碳流体作为介质在高分子合成与制备中的研究进展。文中表明，可在超临界二氧化碳中实施氟代单体的自由基溶液聚合、甲基丙烯酸甲酯的分散聚合、丙烯酸的沉淀聚合、丙烯酰胺的反相乳液聚合以及异丁基乙烯基醚的阳离子聚合等多种聚合反应，可用超临界二氧化碳溶胀聚合法制备梯度共混物。此外，超临界二氧化碳还可用于聚合物分级和聚合物微孔、微纤与微球材料的制备等，显示出超临界二氧化碳是一种对环境无污染且价廉的     

一些含氟单体的合成及其聚合反应的初步研究

合成了含氟单体3-氧杂全氟戊烷-1,5-二磺酰溴(3),N-烯丙基-2-(ω-碘-n-全氟烷氧基)-1,1,2,2-四氟乙磺酰胺(16～18).初步研究了含氟单体3与非共轭二烯的聚合反应、连二亚硫酸钠引发的含氟单体16～18的聚合反应以及α,ω-全氟烷基二碘代烷22,23与非共轭端二烯的聚合反应,得到了相应的含氟聚合物或寡聚物.     

超临界二氧化碳-高分子化学中的绿色介质

介绍了超临界二氧化碳的特点，综述了近期以超临界二氧化碳为溶剂的高分子聚合和高分子化学反应及其应用前景。指出超临界CO2在聚合反应中能作为传统有机溶剂的替代溶剂。     

Hydrophobic and oleophobic surface modification using fluorinated bis-urea and bis-amide gelators

A series of fluorinated bis-urea and bis-amide derivatives were synthesized from fluorinated amines and explored as surface modifiers for nonwoven substrates. A majority of these derivatives showed excellent gelation properties both in organic solvents as well as in supercritical carbon dioxide (scCO₂) at concentrations ranging from 0.3 to 3 wt%. Gelation in the presence of a nonwoven substrate led to a gel-impregnated surface, which upon drying produced a composite with porous microstructure morphology on the surface. The composites thus produced showed high water and hexadecane contact angles, indicative of excellent hydrophobic and lyophobic properties. The superior hydrophobic and oleophobic behaviors observed in these composites are attributed to a combination of increased surface roughness and the presence of fluoroalkyl functionalities in the gelator backbone.     

Viscosity effects on the thermal decomposition of bis(perfluoro-2-N-propoxypropionyl) peroxide in dense carbon dioxide and fluorinated solvents

The thermal decomposition of the free-radical initiator bis(perfluoro-2-N-propoxyprionyl) peroxide (BPPP) was studied in dense carbon dioxide and a series of fluorinated solvents. For the fluorinated solvents, the observed first-order decomposition rate constants, k(obs), increased with decreasing solvent viscosity, suggesting a single-bond decomposition mechanism. The k(obs) values are comparatively larger in dense carbon dioxide and similar to the "zero-viscosity" rate constants extrapolated from the decomposition kinetics in the fluorinated solvents. The decomposition activation parameters demonstrate a compensation behavior of the activation enthalpy with the activation entropy upon change in solvent viscosity. Comparison of the change in activation parameter values upon change in solvent viscosity for BPPP with two additional initiators, acetyl peroxide (AP) and trifluoroacetyl peroxide (TFAP), further suggests that carbon dioxide exerts a very minimal influence on the decomposition mechanism of these initiators through solvent-cage effects.     

The phase behavior of fluorinated diols,divinyl adipate and a fluorinated polyester in supercritical carbon dioxide

The use of supercritical carbon dioxide as a reaction medium for polyester synthesis is hindered by the low solubility of diols in CO₂. However, it has been previously demonstrated that fluorinated compounds can exhibit greater miscibility with carbon dioxide than their hydrocarbon analogs. Therefore, the phase behavior of fluorinated diols and divinyl adipate (DVA), an activated diester, in supercritical carbon dioxide has been investigated at 323 K. The phase behavior of equimolar mixtures of DVA with the most carbon dioxide-soluble diol, 3,3,4,4,5,5,6,6-octafluorooctan-1,8-diol (OFOD), was also determined. The solubility of a polyester synthesized from DVA and 2,2,3,3-tetrafluoro-1,4-butanediol (TFBD) was found to be less CO₂-soluble than its monomers. DVA was much more soluble in CO₂ than any of the fluorinated diols, therefore, no attempt was made to fluorinate the DVA structure. Because both substrates and polyester product were soluble in carbon dioxide, the enzymatic synthesis of a fluorinated polyester from DVA and octafluorooctandiol was performed in supercritical carbon dioxide, resulting in a polymer with a weight average molecular weight of 8232 Da.     

Study of Trioxane Production Process with Super‐ or Subcritical Fluid as Solvent and Extractant

A super‐ or subcritical fluid was used as a reaction solvent for nonaqueous trioxane synthesis instead of common organic solvents. The generation of trioxane from paraformaldehyde was observed in the presence of the catalyst when carbon dioxide reached a supercritical region, suggesting that the supercritical carbon dioxide acted as the reaction solvent. In the case of Freon 12, the trioxane was effectively produced even in a subcritical state.     

Synthesis of fluorinated oligomers for supercritical carbon dioxide applications

Syntheses of various fluorine‐based surfactants, namely fluorinated‐segment‐containing block co‐oligomers, were achieved by the radical polymerization of mainly acrylate‐based monomers. These types of surfactants serve as stabilizers for supercritical carbon dioxide (scCO₂) media based applications, for which the effective solubilization of materials in the supercritical phase is generally not possible because of solubility problems faced when CO₂ is involved. Initially, a difunctional fluorinated initiator was synthesized in two steps. First, 4,4′‐azobis‐4‐cyanovaleric acid was chlorinated with SOCl₂, and then the product, 4,4′‐azobis‐4‐cyanovaleryl chloride, was reacted with a fluorinated alcohol to obtain the initiator for the polymerization reactions. The synthesized triblock co‐oligomers consisted of fluorinated side blocks and a hydrocarbon intermediate block. Efficient solubilization of the materials in scCO₂ was observed. It was experimentally shown that the solubility efficiency was affected by specific interactions between CO₂ and the oligomers, and these were determined by the nature and size of the inner block and by the chain length of the fluorinated side blocks in comparison with the inner block. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5312–5322, 2005     

Synthesis and steric stabilization of silver nanoparticles in neat carbon dioxide solvent using fluorine-free compounds

The adjustable solvent properties, vanishingly low surface tensions, and environmentally green characteristics of supercritical carbon dioxide present certain advantages in nanoparticles synthesis and processing. Unfortunately, most current techniques employed to synthesize and disperse nanoparticles in carbon dioxide use environmentally persistent fluorinated compounds as metal precursors and/or stabilizing ligands. This paper illustrates a one-step process for synthesis and stabilization of silver nanoparticles in carbon dioxide using only fluorine-free compounds. Isostearic acid coated silver nanoaparticles were formed and stably dispersed through arrested precipitation. Silver bis(3,5,5-trimethyl-1-hexyl)sulfosuccinate (Ag-AOT-TMH) was reduced in the presence of isostearic acid as a capping ligand in carbon dioxide solvent to form silver nanoparticles. The addition of cyclohexane as cosolvent or an increase in carbon dioxide solvent density enhances the dispersibility of the particles due to an increase in solvent strength. The dispersibility of the isostearic acid capped silver nanoparticles diminished with time until a stable dispersion was achieved due to the precipitation of a fraction of particle sizes too large to be stabilized by the solvent medium, thereby leaving a smaller size fraction of nanoparticles stably dispersed in the CO2 mixtures. This paper presents the one-step synthesis and stabilization of metallic nanoparticles in neat carbon dioxide without the aid of any fluorinated compounds.     

Fluorinated phenylated polyphenylenes with nanoporous structures and ultralow dielectric constants formed in supercritical carbon dioxide

New fluorinated bis(tetraarylcyclopentadienones) are synthesized, and their compositions and structures are investigated by elemental analysis and IR, Raman, ¹H, ¹³C, and ¹⁹F NMR spectroscopy. The fluorinated bis(tetraarylcyclopentadienones) are used to prepare a number of new fluorinated phenylated polyphenylenes that combine high thermal and mechanical characteristics and low dielectric constants (2.54?C2.74) with solubility in organic solvents. With the use of supercritical carbon dioxide, thermally stable nanoporous materials with ultralow dielectric constants (1.58?C1.97) are designed on the basis of phenylated polyphenylenes. For phenylated polyphenylenes, the described approach to the synthesis of nanoporous structures with the use of supercritical carbon dioxide is developed for the first time. This approach provides the basis for creation of new breakout technologies in the field of microelectronics.