超声电化学快速制备近红外CdTe量子点与细胞成像

针对当前水溶性量子点合成路线复杂、量子产率低的现状, 在无需N₂保护的条件下, 采用简便的超声电化学方法快速合成了CdTe量子点前驱体;并对不同条件下制得的前驱体加热回流, 得到水溶性、高质量的近红外CdTe量子点。产物的形貌、结构和组成通过高分辨透射电子显微镜(HRTEM)、X-射线粉末衍射(XRD)等手段进行了表征。考察了超声电化学参数和回流条件对量子点荧光性质的影响。通过控制电流脉冲宽度、反应时间、反应温度等参数, 实现了CdTe量子点前驱体的可控制备;通过调节加热回流条件得到不同荧光发射波长的量子点;选用602 nm近红外发射波长的CdTe量子点标记了子宫颈癌细胞(Hela), 并采用共聚焦技术实现了肿瘤细胞的显微成像观察。和传统的量子点合成方法相比, 超声电化学方法具有合成路线简单、参数易调可控的特点;为高品质量子点的快速制备提供了新的思路, 拓展了超声电化学在纳米材料制备领域的应用。     

超声电化学快速制备近红外CdTe量子点与细胞成像

针对当前水溶性量子点合成路线复杂、量子产率低的现状,在无需N2保护的条件下,采用简便的超声电化学方法快速合成了CdTe量子点前驱体;并对不同条件下制得的前驱体加热回流,得到水溶性、高质量的近红外CdTe量子点。产物的形貌、结构和组成通过高分辨透射电子显微镜(HRTEM)、X-射线粉末衍射(XRD)等手段进行了表征。考察了超声电化学参数和回流条件对量子点荧光性质的影响。通过控制电流脉冲宽度、反应时间、反应温度等参数,实现了CdTe量子点前驱体的可控制备;通过调节加热回流条件得到不同荧光发射波长的量子点;选用602 nm近红外发射波长的CdTe量子点标记了子宫颈癌细胞(Hela),并采用共聚焦技术实现了肿瘤细胞的显微成像观察。和传统的量子点合成方法相比,超声电化学方法具有合成路线简单、参数易调可控的特点;为高品质量子点的快速制备提供了新的思路,拓展了超声电化学在纳米材料制备领域的应用。     

CdTe/CdSe核壳量子点的合成及其在指纹显现中的应用

以CdCl2和Te粉为原料,在水相中合成了CdTe量子点核;通过外延生长在CdTe量子点核上包覆一层CdSe量子点,得到具有良好荧光性能的CdTe/CdSe核壳量子点;采用X射线衍射仪、透射电镜、高分辨透射电镜分析了不同反应条件下合成的CdTe/CdSe核壳量子点的晶体结构和微观结构,并对其进行了荧光光谱等测试和指纹显现分析.结果表明,合成的CdTe和CdTe/CdSe量子点粒径在3～5nm之间,粒径分布窄,水分散性良好;可以通过控制反应时间和Te/Se比等得到在500～700nm显示荧光发射峰的CdTe/CdSe核壳量子点.此外,核壳CdTe/CdSe量子点可以有效地和指纹物质结合,可应用于对铝合金油潜指纹的鉴别.     

水相合成CdTe量子点测定海藻中微量碲

以亚碲酸钠(Na2TeO3)为Te源,CdCl2为Cd源,水合肼(SHJ)为还原剂,3-巯基丙酸(3-MPA)为稳定剂,制得λEX=380 nm和λEM=608 nm的CdTe量子点(CdTe QDs),该量子点的荧光强度与合成前Na2TeO3浓度呈线性关系.在n(Cd)/n(SHJ)=1∶0.04,n(Cd)/n(3-MPA)=1∶2.7,温度为100℃,反应时间为120m in,溶液pH 10.5的最佳条件下,可制备荧光量子产率为65％的CdTe QDs,该量子点的荧光强度与含碲物质的浓度符合较宽的线性范围(1.0～300 μmol/L),相关系数为0.9982,检测限为38 nmol/L.方法 用于测定微波消解下的海藻样品,加标回收率为106.0％ ～ 112.0％,RSD为5.4％ ～6.1％.     

葡萄糖氧化酶在水溶性CdTe量子点上的直接电化学研究

利用合成的Cd Te量子点(QDs)作修饰材料,将葡萄糖氧化酶(GOD)固定在水溶性Cd Te量子点表面,制备了葡萄糖氧化酶Cd Te量子点修饰碳糊电极(GOD/Cd Te/CPE),实现了GOD在电极表面的直接电化学。Cd Te QDs能有效地加速葡萄糖氧化酶(GOD)与电极表面的直接电子转移,电子传递效率比无QDs Cd Te存在时提高约8倍;电子转移速率常数(K)为0.14 s-1,传递系数(α)为0.60,GOD在GOD/Cd Te/CPE表面的平均覆盖量(Γ)为7.9×10-8mol/cm2。GOD/Cd Te/CPE电极作为第三代葡萄糖电化学生物传感器,成功应用于葡萄糖浓度的检测,其线性范围为0.050~0.32 mmol/L,检出限为0.020 mmol/L。GOD/Cd Te/CPE的制备方法简单,稳定性强,具有优良的选择性和重现性,且响应速度快。     

微波辐射法制备水溶性CdTe/ZnS量子点及其与司帕沙星的作用

以巯基乙酸为稳定剂,通过微波加热在水溶液中制备了CdTe/znS量子点.研究了pH值、反应时间、反应温度和cdTe/s<'2->浓度比等合成条件对cdTe量子点荧光光谱的影响.以CdTe/ZnS量子点为探针,探讨了喹诺酮类抗生素司帕沙星与量子点的荧光猝灭作用,结果表明,在最佳实验条件下,其线性范围为0.05～3.00μg/mL,线性相关系数为0.9954,检出限为0.01μg/mL,可将CdTe/ZnS量子点荧光探针用于司帕沙星的测定.     

基于L-半胱氨酸/CdTe量子点修饰电极的电化学传感器的制备及其对Pb~(2+)的检测

成功制备了由L-半胱氨酸和CdTe量子点作为修饰材料的电化学传感器并用于水体中Pb~(2+)的检测。巯基丙酸修饰的CdTe量子点通过水相合成,表面含有大量羧基,与L-半胱氨酸表面的氨基形成酰胺键,修饰于金电极表面。通过荧光分光光度计、透射电子显微镜、红外光谱、X射线衍射对L-Cys/CdTe QDs复合材料进行表征。采用循环伏安法(CV)研究了L-Cys/CdTe QDs修饰成分在金电极上的电化学性能及CdTe量子点的最佳自组装时间。采用差分脉冲溶出伏安法(DPSV)研究了铅离子在修饰电极上的电化学行为。在优化实验条件下,Pb~(2+)浓度在1.0×10~(-6)~1.0×10~(-2) mol/L范围内与其峰电流呈良好的线性关系,相关系数(r2)为0.993 8,检出限(3σ,n=5)为4.0×10~(-7) mol/L。该传感器具有良好的重现性和稳定性,有望用于实际水样中铅离子的检测。     

CdTe/CdS共敏化TiO2电极材料的制备与光电性能

将电沉积法和化学浴沉积法结合,分别将CdTe和CdS量子点纳米晶材料引入到TiO_2纳米管阵列上制备CdTe/CdS量子点共敏化TiO_2光电极。利用扫描电镜、X射线衍射和X射线能量色散光谱等测试手段对所得样品的形貌、晶型和组分进行表征。在模拟太阳光照射条件下,通过电化学工作站测试其光电化学性能。研究结果表明,相对于单一量子点敏化CdS/TiO_2和CdTe/TiO_2光电极而言,共敏化CdTe/CdS/TiO_2光电极表现出更好的光电转化性能,短路电流密度和光电转换效率分别可以达到3.1 m A·cm~(-2)和1.85%。此外,采用电化学阻抗测试技术对材料性能提升的原因进行深入的探究。     

CdTe量子点的制备及其与Au(Ⅲ)的作用

以金属铝作为还原剂,制备(NH4)2Te前体,合成了水溶性荧光CdTe量子点(QDs),该QDs在紫外光照射下有较强的荧光且发射波长可调谐,并可稳定放置.计算了发射峰位置在575 nm CdTe QDs的粒径为2.82 nm,与TEM图像进行对比,计算了量子产率为28%;讨论了在不同的实验条件下,Au(Ⅲ)对CdTe QDs的荧光猝灭,Au(Ⅲ)的浓度在2.1×10-8～6.0×10-7 mol·L-1与荧光猝灭值呈线性关系,线性方程为△F=0.0903+1.713c,r=0.9984,检出限为9.4×10-9 mol·L-1.     

高性能CdTe/CdS核壳型量子点的制备及应用于小麦面粉中呕吐毒素的荧光免疫检测研究

量子点荧光免疫法的广泛应用迫切需要提高量子点的发光强度和抗体的稳定性. 分别采用巯基乙酸和谷胱甘肽作稳定剂, 水相合成CdTe量子点, 再包覆CdS制备核壳型CdTe/CdS量子点. 以EDC/NHS作交联剂将CdTe/CdS量子点标记到呕吐毒素抗体上, 然后用牛血清蛋白封闭抗体. 研究发现, 谷胱甘肽稳定剂优于巯基乙酸. 与CdTe量子点相比, 谷胱甘肽修饰的CdTe/CdS量子点其荧光的强度和稳定性分别提高6倍和2倍以上. 谷胱甘肽碳链较长, 减少了量子点对抗体尤其是活性位点处的空间构型影响, 从而大大提高抗体的稳定性. 监测不同储藏时间(4 ℃)的CdTe/CdS量子点-抗体偶联复合物与呕吐毒素免疫反应前后荧光强度变化值, 结果显示抗体至少可以稳定7 d. 基于谷胱甘肽稳定的高性能CdTe/CdS量子点, 我们建立了一种新的呕吐毒素荧光免疫检测方法. 呕吐毒素浓度在0～0.9 ng•mL^－1之间相对荧光强度呈线性关系, 相关系数(R²)为0.9992, 检出限是0.038 ng•mL^－1. 方法的灵敏度高于文献报道的其它方法, 如GC-ECD, HPLC和HPLC-MS, 已成功应用于小麦面粉样品中痕量呕吐毒素的测定.     

水相中CdTe纳米晶的制备及其光学性质

用不同稳定剂(巯基乙酸(TGA)、巯基丙酸(MPA)、L-半胱氨酸(L-Cys)、3-巯基-1,2-丙二醇(TG))在水相中制备了CdTe纳米晶, 并用透射电子显微镜(TEM)、X射线光电子能谱(XPS)和X射线粉末衍射(XRD)等技术对其进行了表征. 研究了不同水相合成条件对CdTe纳米晶光学性质的影响, 结果表明, n(Cd):n(Te)、溶液pH值、回流时间以及稳定剂的性质, 对纳米晶的光学性质具有显著影响. 制得的CdTe纳米晶发射峰窄且对称(半高全宽达38 nm), 用不同稳定剂制备的纳米晶发光量子效率有所不同, 用不同的激发波长对纳米晶进行激发时, 发射峰并未表现出明显的移动.     

Synthesis of CdTe nanocrystals using Te nanorods as the Te source and the formation of microtubes with red fluorescence

Here, we report an alternative route to the preparation of highly luminescent CdTe nanocrystals (NCs) using Te nanorods instead of freshly prepared NaHTe as the Te source via a one-pot route under hydrothermal conditions. Furthermore, microtubes with red fluorescence were generated via simply aging the above CdTe NC suspension under ambient conditions.     

Synthesis of Zinc Blende CdTe Nanocrystals and Facile Shape Conversion from Multipods to Dot-shaped Particles

Branched CdTe nanocrystals with zinc blende structure were directly synthesized in the early growth stage at a high initial concentration of cadmium precursor and a high molar ratio of Cd precursor to Te precuesor. Activation of the cadmium precursor by octadecylamine was found to be critical for the formation of branched CdTe nanocrystals. Furthermore, these as-prepared CdTe nanocrystals can evolve into nearly monodisperse dots through Ostwald ripening and still keep strong photoluminescence. These results manifest a new route to synthesize branch- and dot-shaped CdTe nanocrystals with zinc blende structure.     

One-pot synthesis of CdTe quantum dots using tellurium dioxide as a tellurium source in aqueous solution

A novel route has been developed for the synthesis of l-cysteine (Cys)-capped CdTe quantum dots (QDs) in an aqueous medium. Compared with previous reports, this synthesis was carried out in air atmosphere with one pot by using TeO₂ to replace Te or Al₂Te₃ as tellurium source. The mechanism for the formation of CdTe QDs is elucidated. The influences of various experimental variables on the luminescent properties of the obtained CdTe QDs have been systematically investigated, including refluxing time, pH value, Cd/Cys and Cd/Te molar ratios. Furthermore, the obtained QDs were characterized by Fourier transform infrared spectra, X-ray powder diffraction, and transmission electron microscopy, respectively. The results demonstrate that the obtained QDs have zincblende crystal structure with a sphere-like shape. Under the optimized experimental conditions, green- to yellow-emitting CdTe QDs with a maximum photoluminescence quantum yield of 14.6 % can be obtained.     

Spontaneous transformation of CdTe nanoparticles into angled Te nanocrystals: from particles and rods to checkmarks, X-marks, and other unusual shapes

CdTe nanoparticles spontaneously transform into the branched Te nanocrystals with the unique, highly anisotropic shape of checkmarks after partial removal of the stabilizers of L-cysteine. The Te checkmarks are made in a relatively high yield and uniformity; the length of the arms is ca. 150 nm, whereas the angle between the arms is 74 degrees . Subsequent growth of the particle yields mothlike nanocrystals retaining geometrical anisotropy. Unlike the previous synthesis methods of branched nanocrystals, they are formed via a merger of individual rod-shaped crystallites. High-energy crystal faces on their apexes act as the sticky points causing the particles to join in the ends. This is the first demonstration of spontaneous transformation of binary semiconductor particles into highly anisotropic nanocolloids in an angled conformation. The end reactivity of starting Te rods can be used both for bottom-up fabrication of nanoscale electronics and relatively safe and nontoxic method of synthesis of Te-based optical and other materials.     

Stable Water‐dispersed CdTe Nanocrystals Dependent on Stoichiometric Ratio of Cd to Te Precursor

The improved properties of CdTe nanocrystals (NCs) synthesized by hydrothermal method were introduced. The experimental results indicated that the NCs properties could be dramatically influenced by means of changing Cd‐to‐Te molar ratio (the molar ratio of CdCl₂ and NaHTe in the precursor) of the MPA‐capped CdTe NCs. With the increase of the ratio from 2:1 to 10:1, the formation time of near‐infrared‐emitting CdTe NCs was shortened. In particular, high Cd‐to‐Te molar ratio brought about MPA‐capped CdTe NCs of superior radical oxidation‐resistance and photostability. As a result, the optimum ratio was found to be 8:1 or 10:1 in the study in order to efficiently attain stable, water‐dispersed CdTe NCs.     

Optical absorption and valence band photoemission from uncapped CdTe nanocrystals

CdTe nanocrystals have been successfully fabricated by a mechanical alloying process. X-ray diffraction (XRD) patterns demonstrate that a single-phase CdTe compound with a zinc blende structure has been formed after ball milling elemental Cd and Te mixture powders for 27 h. The large broadening effect for the width of the {111} diffraction peak of uncapped CdTe nanocrystals on smaller size was observed in slowly scanned XRD patterns. The X-ray photoelectron spectrum was used to study the surface of the uncapped CdTe nanocrystals within both core level and valence band regions. The presence of tellurium oxide film on the surface of the uncapped CdTe nanocrystals has been detected in the X-ray photoelectron spectrum of the Te 3d core level, which was comparable to the observed amorphous oxide thin layer on the surface of uncapped CdTe nanocrystals in a high resolution transmission electron microscopy (HRTEM) image. The energy of the valence band maximum for uncapped CdTe powders blue shifts to the higher energy side with smaller particle sizes. In UV-visible optical absorption spectra of the suspension solution containing uncapped CdTe nanocrystals, the absorption peaks were locating within the ultraviolet region, which shifted toward the higher energy side with prolonged ball milling time. Both blue shifts of valence band maximum energy and absorption peaks with decreasing particle size provide a unique pathway to reveal the quantum confinement effect of uncapped CdTe nanocrystals.     

Synthesis of Aqueous CdTe Nanocrystals with High Efficient Blue‐Green Emission of Exciton

As one of the most popular nanocrystals (NCs), aqueous CdTe NCs have very weak green emission under conventional synthesis conditions. In this work, we report the first example of blue‐emitting CdTe NCs directly synthesized in aqueous solution by slowing down the growth rate after nucleation. The key for the synthesis is the optimization of NC growth conditions, namely pH range of 7.5 to 8.5, TGA/Cd ratio of 3.6, Cd/Te ratio of 10, and Te concentration of 2×10^?5 mol/L, to get a slow growth rate after nucleation. The as‐prepared blue‐emitting CdTe NCs have small size (as small as 1.9 nm) and bright emission [with 4% photoluminescence quantum yield (PL QY) at 486 nm and 17% PLQY at 500 nm]. Transmission electron microscopy (TEM) images of the as‐prepared CdTe show monodispersed NCs which exhibit cubic zinc blend structure. Moreover, time‐resolved PL decay and X‐ray photoelectron spectroscopy (XPS) results show the as‐prepared NCs have better surface modification by ligand, which makes these luminescent small CdTe NCs have higher photoluminescence quantum yield, compared with NCs synthesized under conventional conditions.     

Synthesis of CdTe/SiO_2 Composites and Their Fluorescence Properties

Thioglycolic acid(TGA)-stabilized CdTe nanocrystals(NCs) were prepared with sodium tellurite as tellurium source,which avoids the cumbersome processes associated with H2Te or NaHTe sources.Fluorescent CdTe/SiO2 composites were synthesized by a sol-gel method without the exchange of surface ligands.The phase structure of CdTe NCs was investigated by X-ray diffractometry.For comparison,some characterizations were done for both the CdTe NCs and the composites.CdTe NCs and CdTe/SiO2 composites were characterize...     

Preparation and Optical Properties of CdTe/CdO-nH2O Core/shell Nano-composites in Aqueous Solution

"The deposition of CdO?nH2O on CdTe nanoparticles was studied in an aqueous phase. The CdTe nanocrystals (NCs) were prepared in aqueous solution through the reaction between Cd2+ and NaHTe in the presence of thioglycolic acid as a stabilizer. The molar ratio of the Cd2+ to Te2- in the precursory solution played an important role in the photoluminescence of the ultimate CdTe NCs. The strongest photoluminescence was obtained under 4.0 of Cd2+/Te2- at pH?8.2. With the optimum dosage of Cd(II) hydrous oxide deposited on the CdTe NCs, the photoluminescence was enhanced greatly. The photoluminescence of these nanocomposites was kept constant in the pH range of 8.0-10.0, but dramatically decreased with an obvious blue-shifted peak while the pH was below 8.0. In addition, the photochemical oxidation of CdTe NCs with cadmium hydrous oxide deposition was markedly inhibited."