Influence of drying method on the material properties of nanocellulose I: thermostability and crystallinity

The effect of drying method on selected material properties of nanocellulose was investigated. Samples of nanofibrillated cellulose (NFC) and cellulose nanocrystals (CNC) were each subjected to four separate drying methods: air-drying, freeze-drying, spray-drying, and supercritical-drying. The thermal stability and crystallinity of the dried nanocellulose were evaluated using thermogravimetric analysis (TGA) and X-ray diffraction. Supercritical-drying produced NFCs with the least thermal stability and the lowest crystallinity index. Air-drying or spray-drying produced NFCs which were more thermally stable compared with freeze-dried NFCs. The CNCs dried by the three methods (air-drying, freeze-drying, and spray-drying) have similar onset temperature of thermal degradation. The different drying methods resulted in various char weight percentages at 600 °C for the dried NFCs or CNCs from TGA measurements. The dried NFCs are pure cellulose I while the dried CNCs consist of cellulose I and II. The calculated crystallinity indices differ with each drying method. The cellulose II content in CNCs changes as a function of drying method. For the application of nanocellulose in non polar thermoplastics, spray-dried products are recommended according to their higher thermal stability and higher crystallinity index.     

Structural FTIR analysis and thermal characterisation of lyocell and viscose-type fibres

The microstructure and thermal properties of lyocell and other regenerated cellulose fibres (viscose and modal) were analysed using DSC, TG and FTIR. The FTIR spectral analysis showed that lyocell is the most crystalline fibre and is composed principally of crystalline cellulose II and amorphous cellulose. Likewise, the thermal analysis showed that lyocell has a higher thermal stability than viscose and modal fibres, as the difference between the onset temperature for its decomposition process was as high as 20 °C.     

The effect of drying method on the properties and nanoscale structure of cellulose whiskers

Cellulose whiskers were prepared from wood- and cotton-based microcrystalline cellulose and dried by two methods: freeze-drying or air-drying. The effect of drying method on the properties and structure of the whiskers were studied. Furthermore, the influence of the source of cellulose on the nanoscale structure was investigated. Drying method was observed to slightly influence the thermal stability of cellulose whiskers, whereas the char residue varied significantly depending on the drying process performed. Small- and wide-angle X-ray scattering and solid state nuclear magnetic resonance spectroscopy were used to examine the crystallinity and nanoscale structure of the dried whiskers. It was observed that the crystal structure and crystallinity of cellulose whiskers remained during all treatments, whereas their nanoscale structure was significantly influenced by drying method, neutralization, and source of cellulose. Relationships between thermal behavior and nanoscale structure were reported and discussed.     

Bacterial cellulose/poly(ethylene glycol) composite: characterization and first evaluation of biocompatibility

Bacterial cellulose (BC)/poly(ethylene glycol) (PEG) composite was prepared by immersing wet BC pellicle in PEG aqueous solution followed by freeze-drying process. The product looks like a foam structure. The morphology of BC/PEG composite was examined by scanning electron microscope (SEM) and compared with pristine BC. SEM images showed that PEG molecules was not only coated on the BC fibrils surface but also penetrated into BC fiber networks. It has very well interconnected porous network structure and large aspect surface. The composite was also characterized by Fourier transform infrared spectrum, X-ray diffraction, thermogravimetric analysis (TGA) and tensile test. It was found that the presence of PEG affected the preferential orientation of the (1[`1]0 1\bar{1}0 ) plane during the drying process of BC pellicle, which in turn decrease the crystallinity of dried BC. The TGA result showed that the thermal stability was improved from 263 to 293 °C, which might be associated with strong interaction between BC and PEG. Tensile test results indicate that the Young’s modulus and tensile strength tend to decrease. Biocompatibility of composite was preliminarily evaluated by cell adhesion studies using 3T3 fibroblast cells. The cells incubated with BC/PEG scaffolds for 48 h were capable of forming cell adhesion and proliferation, which showed much better biocompatibility than the pure BC. The prepared BC/PEG scaffolds can be used for wound dressing or tissue-engineering scaffolds.     

Surface grafting of microfibrillated cellulose with poly(ε-caprolactone) - Synthesis and characterization

In cellulose nanocomposites, the surface of the nanocellulosic phase is critical with respect to nanocellulose dispersion, network formation and nanocomposite properties. Microfibrillated cellulose (MFC) has been grafted with poly(ε-caprolactone) (PCL), via ring-opening polymerization (ROP). This changes the surface characteristics of MFC and makes it possible to obtain a stable dispersion of MFC in a nonpolar solvent; it also improves MFC’s compatibility with PCL. The thermal behavior of MFC grafted with different amount of PCL has been investigated using thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). From TGA measurements, the fraction of PCL in MFC-PCL samples was estimated to 16%, 19%, and 21%. The crystallization and melting behavior of free PCL and MFC-PCL were studied with DSC, and a significant difference was observed regarding melting points, crystallization temperature, degree of crystallinity, as well as the time required for crystallization.     

The effect of barley husk arabinoxylan adsorption on the properties of cellulose fibres

This study investigates the adsorption of (glucurono)arabinoxylan (GAX) on cellulose fibres and the properties thereof. A water-soluble GAX, from barley husks (Hordeum vulgare), was isolated using chlorite delignification and alkaline extraction followed by enzymatic purification. The isolated GAX fraction showed an arabinose to xylose ratio of 0.22 and a weight average molar mass of 20,200 g/mol, as determined by size exclusion chromatography (SEC) in DMSO:H₂O. The GAX was adsorbed on cellulose fibres under well controlled conditions, where temperature and initial concentration of GAX proved to be important parameters in controlling the level of adsorption. The adsorption process was also dependent on xylan molecular structure. Carbohydrate analysis on the modified fibres showed a preferential adsorption of low substituted xylans (arabinose to xylose ratio of ∼0.10). During the adsorption process the GAX solution was analyzed using SEC-RI-MALLS in aqueous solvent, which demonstrated a molecular xylan adsorption on cellulose fibres. Additionally, a decrease in light scattering responses, which corresponds to an adsorption of aggregated xylan and/or xylan with a great tendency towards self-association, could be observed during the adsorption process. This was demonstrated by adsorption of GAX on regenerated cellulose fibres (Lyocell), which compared to native fibres possesses a relatively smooth fibre surface. Atomic force microscopy analysis visualised a heterogeneous decoration of the Lyocell fibres with xylan agglomerates. The effect of GAX adsorption on paper strength was also investigated. A GAX modified kraft pulp showed an evident increase in tensile strength, which might be due to a retained fibre–fibre bonding ability for xylan coated fibrils after drying and rewetting.     

Structure–property relationships of blended polysaccharide and protein biomaterials in ionic liquid

Cellulose and silk blended biomaterial films were regenerated from ionic liquid solution and investigated to characterize and understand the effect of inter- and intra-molecular interactions upon the morphology and thermal properties. The blended films were dissolved in 1-allyl-3-methylimidazolium chloride ionic liquid, coagulated and regenerated with water. Various characterization techniques were implemented to characterize structural, morphological and thermal properties: FTIR, SEM, TGA, DSC and X-ray scattering. The results showed that the cellulose microcrystalline structure and β-sheets from the silk can be disrupted by inter- and intra-molecular hydrogen bonds forming intermediate semicrystalline or amorphous structures. The SEM showed morphological effects of such interactions that cause varying thermal degradation and glass transition temperature. The X-ray scattering confirms such findings at the molecular level, demonstrating that the cellulose microfibril diameter decreases as the silk content increases. It also shows that the β-sheets size increases as the cellulose content increases. These various techniques provide evidence that suggest the hydrogen bonds between the β-sheets and the glucose units in the cellulose chains control the thermal and structural properties of the blended films, changing the morphology and physicochemical properties.     

The nanostructure of kraft pulp 1: evaluation of various mild drying methods using field emission scanning electron microscopy

Wood pulp fiber consists of carbohydrate fibrils containing crystalline cellulose microfibrils of a few nanometer width. The structure of the fibril in water is currently unclear due to the difficulty of imaging pulp fiber in water at nanometer resolution. An alternative method is to observe the sample dried with a mild drying method to preserve the structure of the wet sample. In this study, we studied softwood kraft pulp fibers which were dried with various mild drying methods and then imaged by field emission scanning electron microscopy at nanometer resolution. Both mild dried samples, as well as air dried samples, showed 10–20 nm wide fibrils, the width of which corresponded to a crystalline cellulose microfibril or bundles of them. The mild dried sample, which was critical point dried with liquid CO₂ (CPD), mainly showed 20–40 nm thick fibrils, in addition to the 10–20 nm fibrils. The existence of the thick fibril implies that the fibril itself has a swelling nature in water, although the possibility that the thick fibril was an artifact of the CPD process could not be excluded. Further investigation as to the extent that the thick fibrils found in the CPD samples reflect the nanostructure of pulp fiber in water is warranted.     

Structure characterization of native cellulose during dehydration and rehydration

The goal of this study is to investigate the hydration and dehydration induced structural changes of native cellulose. Never dried cotton, and never dried bacterial cellulose with and without added matrix polymer xyloglucan, are examined under the influence of dehydration and rehydration. Significant crystal structure changes were observed in the later stage of drying for both cotton and bacterial cellulose (BC). The 1 % lateral expansion in glucan chain spacing and 17 % decrease of calculated Scherrer dimension were detected for cotton due to the distortion of the structure possibly caused by mechanical stresses associated with drying. No detectable changes on average glucan chain spacings were observed for large BC crystals. However, an average width decrease by 4.4 nm was discovered in the (010) direction, which was more significant than that observed in the (100) and (110) directions. It is hypothesized that co-crystallized elementary fibrils preferentially disassociate along the (010) plane resulting in a significant reduction of crystal width. In the BC-xyloglucan model composite, the presence of xyloglucan does not interfere with the dehydration behavior. Rehydration leads to some structural changes but to a lesser extent than the initial drying. High temperature dehydration induced deformation and crystal size changes are found to be non-reversible due to the removal of the last hydration layer on the cellulose surface.     

Extraction and Characterization of Cellulose Nanowhiskers from Balsa Wood

Summary: In this study cellulose nanowhiskers were obtained from balsa wood. For this purpose, fibers of balsa wood were exposed to hydrolysis reactions for lignin and hemicellulose digestion and acquisition of nano-scale cellulose. Transmission electron microscopy (TEM) results demonstrated that the obtained cellulose nanocrystals had average length and thickness of 176 (±68 nm) and 7.5 (±2.9 nm), respectively. Infrared spectroscopy (FTIR) and wide angle x-ray diffraction (WAXD) showed that the process for extracting the nanowhiskers digested nearly all the lignin and hemicellulose from the balsa fiber and still preserved the aspect ratio and crystallinity satisfactory enough for future application as nanofillers in polymer nanocomposites. The thermogravimetric analysis (TGA) showed that the onset temperature of thermal degradation of the cellulose nanocrystals (226 °C) was higher than the onset temperature of the balsa fiber (215 °C), allowing its use in molding processes with polymers melts.     

Synthesis and characterisation of nanofibrillar cellulose aerogels

We prepared from cellulose fibres monolithic aero- and cryogels. Cellulose is dissolved in hydrated calciumthiocyanate melt, gelled, aged and dried by several methods. The density of cellulose aerogels produced by supercritical drying is in the range between 10 and 60 kg/m³ with a surface area of 200–220 m²/g. The cellulose cryogels produced by freeze drying exhibit a maximum surface area of 160 m²/g. Sputtered cellulose aero- and cryogels are examined with a scanning electron microscope. The results are discussed with respect to the literature and simple mathematical models.     

干燥方式对高氯酸铵/石墨烯复合材料的结构和热分解行为的影响

通过溶胶-凝胶法制备了石墨烯水凝胶, 并将其与高氯酸铵(AP)复合, 然后分别采用自然干燥、冷冻干燥和超临界CO₂干燥三种干燥方式制备了AP/石墨烯复合材料, 并通过扫描电镜(SEM)、元素分析、X射线衍射(XRD)、差示扫描量热仪(DSC)和热重-红外联用技术(TG-FTIR)研究了不同干燥方式对其结构和热分解行为的影响. 结果表明, 干燥方式对AP/石墨烯复合材料的形貌具有明显影响, 其中通过超临界CO₂干燥制备的AP/石墨烯复合材料基本能保持与石墨烯气凝胶相似的外观和多孔结构. 通过自然干燥、冷冻干燥和超临界CO₂干燥制备的AP/石墨烯复合材料中AP的质量分数分别为89.97%、92.41%和94.40%, 其中通过超临界CO₂干燥制备的复合材料中AP的粒径尺寸为69 nm. DSC测试结果表明, 石墨烯对AP的热分解过程具有明显的促进作用, 能使AP的低温分解过程大大减弱, 高温分解峰温明显降低. 三种干燥方式相比, 通过超临界CO₂干燥制备的AP/石墨烯复合材料中石墨烯的促进作用最明显. 与纯AP相比, 其高温分解峰温降低了83.7℃, 表观分解热提高到2110 J·g^-1. TG-FTIR分析结果表明, AP/石墨烯复合材料的热分解过程中, AP分解产生的氧化性产物与石墨烯发生了氧化反应, 生成了CO₂.     

Single stage purification of flax,hemp, and milkweed stem and their physical and morphological properties

Agriculture biomass is an alternative possible solution for the extraction of cellulose, compared to the classical soft and hard wood. However, the valorization of cellulose is challenging for the researchers as it involves multiple steps. In the present study, the raw fibers of flax, hemp, and milkweed stem fibers were purified in single step using hydrogen peroxide in water. By this method authors successfully extracted the purified cellulose fibers without damaging the fiber length. The purified fibers were characterized to understand the thermal, functional, crystalline, and morphological properties by thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and scanning electron microscopy (SEM). The FTIR results showed the effective removal of lignin and significant improvement in thermal stability was observed by TGA. Evidently, the SEM results showed significant improvement in the morphology compared to that of the raw fibers. XRD results showed that the treatment does not affect the crystallinity of the fibers.     

Characterization of methylcellulose produced from sugar cane bagasse cellulose: Crystallinity and thermal properties

In the present work, methylcellulose produced from sugar cane bagasse was characterized by FTIR, WAXD, DTA and TGA techniques. Two samples were synthesized: methylcellulose A and methylcellulose B. The only difference in the process was the addition of fresh reactants during the preparation of methylcellulose B. The ratio between the absorption intensities of the C-H stretching band at around 2900 cm⁻¹ and O-H stretching at around 3400 cm⁻¹ for methylcellulose B is higher than for methylcellulose A, indicating that methylcellulose B showed an increase in the degree of substitution (DS). Methylcellulose A presents a more heterogeneous structure, which is similar to the original cellulose as seen through FTIR and DTA. Methylcellulose B showed thermal properties similar to commercial methylcellulose. The modification of methylcellulose preparation method allows the production of a material with higher DS, crystallinity and thermal stability in relation to the original cellulose and to methylcellulose A.     

Cellulose nano-particles from Pandanus: viscometric and crystallographic studies

Pandanus utilis a plant abundant throughout Kerala, India has been used as a source to isolate nano-particles. The fibres were extracted from Pandanus plant by biological natural retting. Extracted fibres were dried, ground and treated with 5 % NaOH followed by bleaching using 5 wt % hypochlorite solution. Bleached cellulose was hydrolysed using sulphuric acid. After centrifugation, suspension was freeze dried. Effect of Acid concentration, temperature and time of hydrolysis on the isolation of cellulose nanoparticles was studied. FESEM images of cellulose showed the presence of spherical nano-particles. Dynamic light scattering revealed homogeneous dispersion of nano-particles. Degree of polymerisation of cellulose was determined viscometrically using cupriethylene-diamine as solvent. Removal of lignin and hemicelluloses was confirmed from FTIR spectra. X-Ray diffractograms of powdered fibre, bleached cellulose and nano-cellulose were compared. Using peak height method and peak de-convolution method, crystallinity indices were determined. Using Scherrer equation crystallite size was calculated and it further confirmed that particles are of nanometre size.     

Characterization and pyrolysis behaviour of different paper mill waste materials

Paper industry generates a considerable amount of wastes. Their composition mainly depends on the type of paper produced and the origin of cellulose fibres. Nowadays, in Spain, 40% of solid wastes generated by the paper and pulp industry are deposited directly in landfill, 25% are used in the agriculture, 13% in the ceramic industry and 7% in the concrete production. In the last years, thermal treatment methods like combustion, pyrolysis and gasification have been widely study as alternative techniques for the valorization of different organic waste materials. The main objective of the present work is to study the pyrolysis behaviour of different paper mill waste materials. For this reason, a wide characterization of eight paper mill waste materials from different origins was performed using SEM, FTIR, DRX and thermogravimetric techniques. Paper mill sludges from recycled paper, mainly wastes obtained from deinking process, showed high CaCO₃ and clays contents. Compared with the elevated total organic matter content (TOM) of paper mill waste materials their low organic carbon content determined by Cr₂O₇²⁻ oxidation reveals the elevated chemical stability of organic matter, due to high content on cellulose fibres. Analysis of samples by SEM indicates that successive recycled processes of paper leads to paper mill waste materials with more degraded fibres. XRD analyses show as crystalline cellulose was present in reject and primary sludge from paper mills that produced paper from virgin wood. However, crystalline cellulose content significantly decreased in waste materials from recycled paper. Finally, thermogravimetric analysis indicates that presence or mineral matter and degradation of cellulose significantly influences their pyrolysis behaviour. In general, weight loss of paper mill waste materials started at lower temperatures than pure cellulose. In waste materials from recycled paper weight loss continues at temperatures highest than 500 °C due to kaolinite dehydration and carbonates decomposition.     

TGA/FTIR study on thermal degradation of polymethacrylates containing carboxylic groups

In this work, the thermal degradation of polymethacrylates containing carboxylic groups namely poly(methacryloyloxy butanoic acid), PMBA; poly(methacryloyloxy hexanoic acid), PMHA; and poly(p-methacryloyloxy benzoic acid), PMBeA was investigated by TGA/FTIR. Moreover, in order to shed more light on the reaction pathways during the thermal decomposition of these polymers, an FTIR spectroscopic study of structural changes in the degrading material was performed. By TGA it was observed that PMBA exhibited two well-defined degradation stages at 327 and 450 °C; PMHA presents only one main weight loss at ca. 402 °C although from DTG curve it was noted that the single step degradation was composed by two overlapped peaks located at 414 and 449 °C and a small shoulder at 317 °C; finally PMBeA showed three weight loss regions at 265, 353 and 468 °C. From FTIR analysis of the partially degraded samples it was found that the thermal degradation of these polymers resembled that of polymethacrylic acid, i.e. anhydrides were initially formed and then the modified structure is broken to yield an aromatic structure with phenolic groups. In contrast, the analysis by FTIR of the volatile products from the studied polymers differs notably than those obtained for polymethacrylic acid: β-lactones and γ-lactones were released from PMBA and PMHA, respectively, during its thermal degradation, whereas an ester derivative from benzoic acid evolves from PMBeA probably through depolymerization.     

Improvement of mechanical and oxygen barrier properties of cellulose films by controlling drying conditions of regenerated cellulose hydrogels

Mechanical, thermal and oxygen barrier properties of regenerated cellulose films prepared from aqueous cellulose/alkali/urea solutions can be markedly improved by controlling the drying conditions of the films. By pre-pressing followed by vacuum drying under compression, the tensile strength, Young’s modulus, coefficient of thermal expansion and oxygen permeability of the dried films reached 263 MPa, 7.3 GPa, 10.3 ppm K⁻¹ and 0.0007 ml μm m⁻² day⁻¹ kPa⁻¹, respectively. Thus, films produced in this way show the highest performance of regenerated cellulose films with no orientation of cellulose chains reported to date. These improved properties are accompanied by a clear increase in cellulose II crystallinity from 50 to 62% during pre-pressing/press-vacuum drying process. At the same time, the film density increased from 1.45 to 1.57 g cm⁻³, and the moisture content under equilibrium conditions decreased from 14.1 to 9.8%. Hence, the aqueous alkali/urea solvent system has potential applications in producing new and environmentally friendly cellulose films with high performances through control of the drying conditions.     

Effects of Different Drying Processes on the Material Properties of Bacterial Cellulose Membranes

Summary: Membranes of bacterial cellulose produced by Gluconacetobacter xylinus show a high water and gas permeability that can be altered by different drying techniques. It could be shown that freeze-drying reduces the swellability of the polymer membranes by a factor of 5 while evaporation drying causes a reduction by a factor of 50. The strong decrease of swellability for an evaporation dried membrane could be correlated with a reduction of the absolute number of polymer strands that form the network structure of the membrane, determined with oscillatory shear rheological experiments. The removal of network meshes by a complete aggregation of polymer strands could be confirmed by IR-spectroscopy with an increased degree of intramolecular hydrogen bonding of cellulose strands. In contrast to this, the freeze-drying process shows a slight increase of the number of network meshes due to partial aggregation of free polymer strands. Freeze-dried membranes show a gas permeability two orders of magnitude higher then evaporation dried membranes. The absolute permeability strongly depends on the bacterial strain used for the polymer membrane synthesis and varies by up to 1.5 orders of magnitude for the same drying process. The Young's modulus of the polymer membranes varies with the bacterial strain used, but does not show the same trends as the permeability. Finally, a comparison of the characterized properties shows that only one of the tested strains shows the capability to synthesize membranes that meets the requirements for an application as a wet wound dressing.