新钽酸盐Ba2LnTi2Ta3O15(Ln=Y、La)的结构与介电性能

通过固相反应法合成了四方钨青铜结构新钽酸盐Ba2LaTi2Ta3O15与Ba2YTi2Ta3O15,分别进行了X射线衍射分析与介电性能测试.结果表明, Ba2LaTi2Ta3O15室温时晶胞参数为a=1.242 64(5) nm, c=0.391 57(2) nm,为四方钨青铜结构顺电相；Ba2YTi2Ta3O15室温时晶胞参数为a=1.236 46(4) nm, c=0.388 60(2) nm,为四方钨青铜结构铁电相,铁电相与顺电相转变温度为180 ℃.频率为1 MHz时, Ba2LaTi2Ta3O15陶瓷的室温相对介电常数为194,介电损耗也降低至8×10－4. Ba2YTi2Ta3O15陶瓷的室温相对介电常数为107.     

新铌酸盐Sr5LnTi3Nb7O30的结构与介电性能

在SrO-Ln2O3-TiO2-Nb2O5(Ln=La, Y)体系中,通过固相反应法，合成了填满型钨青铜结构新铌酸盐Sr5LaTi3Nb7O30与Sr5YTi3Nb7O30.分别采用X射线衍射分析、扫描电镜进行了结构分析,并进行了介电性能测试.结果表明, Sr5LaTi3Nb7O30室温时为四方钨青铜结构顺电相,晶胞参数a=1.233 60(4) nm, c=0.388 01(2) nm;频率为1 MHz时,其陶瓷的室温相对介电常数为466,介电损耗约为5×10－3.Sr5YTi3Nb7O30为弛豫性铁电体, 10 kHz时居里温度为260 ℃;室温时为四方钨青铜结构铁电相,晶胞参数a=1.228 80(4) nm, c=0.387 05(2) nm; 1 MHz时,陶瓷体的室温相对介电常数为290.     

铌酸盐 Ba5YTi3 Nb7 O30的结构与介电性能

在BaO-TiO2-Mb2O5体系中通过掺Y3－合成了铌酸盐Ba5YTi3Nb7O30 ,采用粉晶X射线衍射（XRD）对其结构进行了分析,并测试了其烧结体的介电特性,结果表明,在室温下Ba4YT3 Nb7O30属于填满型四方钨青铜结构,晶胞参数,a=1.24332(2)nm,c=0.39453(1)nm,α=β=γ＝90度,Ba5TYi3Nb7O30在100度从铁电相转变为顺电相。     

新铌酸盐Ba5LnZnNb9O30(Ln=Y,La)的合成、结构与介电性能

在BaO-Ln2O3-ZnO-Nb2O5(Ln=Y,La)体系中通过固相反应法合成了填满型钨青铜结构的新铌酸盐Ba5YZnNb9O30与Ba5LaZnNb9O30.采用X射线衍射分析和扫描电镜进行了结构分析,并进行了介电性能测试.结果表明,Ba5YZnNb9O30为弛豫性铁电体,10kHz时的居里温度为25℃;室温时为四方钨青铜结构铁电相,晶胞参数a=1.25255(4)nm,c=0.39530(2)nm;1MHz时陶瓷体的室温相对介电常数为456.Ba5YZnNb9O30在室温下为四方钨青铜结构顺电相,晶胞参数a=1.25731(3)nm,c=0.39812(2)nm;频率为1MHz时,其陶瓷的室温相对介电常数为316.     

新钽酸盐Ba3TiTa4O15的结构与介电性能

在BaO Ta2O5系统通过掺Ti4＋合成了新钽酸盐Ba3TiTa4O15,用粉晶XRD对其结构进行了分析,并测试了其烧结体的介电特性.结果表明:Ba3TiTa4O15在室温下属于填满型四方钨青铜结构,晶胞参数a=1.256 27(6)nm, c=0.395 86(4)nm; Ba3TiTa4O15在－35 ℃从铁电相转变为顺电相.     

类钙钛矿新铌酸盐Ba5LaTi2Nb3O18的合成、结构与介电特性

为满足现代通信技术小型化、集成化与高可靠性的迫切要求,探索具有高介电常数、低介电损耗与低温度系数的微波介电材料引起了材料科学、化学、物理和电子科学等领域科学工作者的广泛关注,并已开发出复合钙钛矿结构的Ba(Mg1/3Ta2/3)O3、Ba(Zn1/3Ta2/3)O3和钨青铜结构的Ba6-3xLn8+2x·Ti18O54及Ba2Ti9O20等实用化的高性能材料[1～7].这类材料均由氧八面体共顶连接,而且氧八面体内(B位)、外(A位)阳离子比例等于或略大于1,由此,我们推测在B位与A位阳离子比例略小于1的类钙钛矿结构中也极有可能存在具有优良介电性能的新材料,因此对通式为AnBn-1O3n(n=5,6,7,8)的系列新化合物进行了系统的合成、结构与介电性能研究[8,9].本文报道在BaO-La2O3-TiO2-Nb2O5体系中合成的具有5层类钙钛矿结构的新铌酸盐Ba5LaTi2Nb3O18,发现该材料具有较好的介电性能.     

锶、铈和镧共掺杂铈钛酸锶钡陶瓷的固溶性和介电性能的研究

采用冷压陶瓷技术,制备了(Ba1-x-0.02SrxLa0.02)(Ti1-yCey)O3(x=0.05,0.10,0.15;y=0.03,0.04,0.05)(BSLTC)陶瓷,通过X射线衍射(XRD)和介电温谱测试对BSLTC陶瓷的固溶性和介电性能进行调查。XRD结果表明,所有样品均为立方钙钛矿结构,La掺杂量为2%时,能够将(Sr,Ce)组合的固溶提高到(x=0.10,y=0.04)或(x=0.15,y=0.03)。介电结果表明,各样品的居里温度都在室温附近,介电峰明显宽化。其中,(x=0.05,y=0.03)组合的样品显示出最高的室温介电常数(ε’RT≈6000)和低介电损耗(tanδ<0.02),满足美国EIA"Y5V"高介电陶瓷材料指标。     

铌酸盐Ba6FeNb9O30的XRD研究

在BaO -Fe2O3-Nb2O5 三元系统中 ,新发现存在铌酸盐Ba6FeNb9O30,利用四圆单晶衍射仪进行了晶胞参数测定 ,然后采用X射线粉晶衍射法获得该化合物的粉晶衍射数据 ,并进行了指标化 ,F30 =32(0.016,58)。XRD分析结果表明 ,该化合物属于填满型四方钨青铜结构 ,晶胞参数为 :a=1.25812(4)nm ,c=0.3992(4)nm ,α=β=γ=90°。     

三核铁簇硫酸盐K_2(H_3O)_3[Fe_3(H_2O)_3O(SO_4)_6]·6H_2O的合成与晶体结构

在室温条件下合成了含三核铁簇的硫酸盐配合物K2(H3O)3[Fe3(H2O)3O(SO4)6].6 H2O,借助IR光谱、紫外-可见吸收光谱、X射线光电子能谱(XPS)和X射线单晶衍射等测试手段对其结构进行了表征.结果表明,标题化合物属于六方晶系,P6(3)/m空间群,晶胞参数为:a=b=0.963 7(2)nm,c=1.885 1(9)nm,V=1.516 3(9)nm3,Z=2,Dc=2.316 g/cm3,GOOF=1.089,R1=0.062 8,wR2=0.165 1.其分子由1个三核铁簇阴离子[Fe3(H2O)3O(SO4)6]5-、2个K+离子、3个水合质子H3O+和6个结晶水分子组成.     

(BEDT-TTF)2C3H5SO3·H2O新晶体的生长、结构与导电性

用恒电流电化学结晶法培养了一种新的基于BEDT-TTF的电荷转移盐(BEDT-TTF)2C3H5SO3·H2O [BEDT-TTF=双(亚乙基二硫)四硫富瓦烯,C3H5SO-3=烯丙基磺酸根].通过四圆X射线衍射方法测定了(BEDT-TTF)2C3H5SO3·H2O的结构.晶体属于正交晶系,Pma2空间群;晶胞参数a=3.2772(3) nm, b=0.79604(7) nm, c=0.66868(7) nm, V=1.7445(3) nm3.在标题化合物晶体中,BEDT-TTF0.5+自由基形成α′-型堆积,烯丙基磺酸根阴离子则通过氢键沿c轴方向连接成链.(BEDT-TTF)2C3H5SO3·H2O的室温电导率为0.0489 Ω-1·m-1,电阻率-温度测定曲线表明它具有典型的半导体导电行为,其导电激活能为0.319 eV.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.