自组装超薄膜修饰Ta2O5介质膜及其特性研究

采用静电自组装方法在五氧化二钽(Ta2O5)介质氧化膜上制备了聚二烯丙基二甲基氯化铵(PDDA)/聚苯乙烯磺酸钠(PSS)和聚二烯丙基二甲基氯化铵/聚-3,4-乙烯二氧噻吩-聚苯乙烯磺酸钠(PEDOT-PSS)超薄膜.研究了两种自组装超薄膜在Ta2O5介质氧化薄膜上的组装特性.结果表明两种自组装膜能够稳定地组装于Ta2O5介质膜表面,并有效降低薄膜的表面粗糙度.进一步研究了两种自组装超薄膜修饰的Ta2O5电容结构的电性能.结果表明静电自组装膜对Ta2O5介质膜表面进行修饰后,有效地隔离了介质氧化膜中的缺陷,降低了电容的漏电流并提高耐电压能力;研究还发现不同厚度的超薄膜对Ta2O5电容结构的耐压特性有不同程度的影响,较厚的薄膜可以更好地提高电容的耐压能力并降低漏电流,但会增加电容的等效串联电阻(ESR).另外,在相同薄膜层数的情况下,聚合物电解质PEDOT-PSS良好的导电性能降低了复合超薄膜的电阻,使得PDDA/PEDOT-PSS修饰的电容结构ESR值较低.     

PDDA/SnTsPc静电自组装膜的制备及其形态研究

采用静电层-层自组装技术制备出了含有阴离子磺化酞菁锡(SnTsPc)和阳离子聚二烯丙基二甲基胺盐酸盐(PDDA)交替复合超薄膜.利用紫外-可见光谱表征了PDDA/SnTsPc多层膜的组装过程,表明薄膜的吸收是连续的、有规律的.原子力结果表明,膜表面是光滑的、均匀的;在膜表面紧密堆积的纳米粒子的平均粒径为53.1 nm,平均表面粗糙度是4.021 nm.     

二氧化硅纳米粒子薄膜的制备及光学性能

以二氧化硅胶体和聚二烯丙基二甲基氯化铵(PDDA)为原料,利用静电自组装技术制备了PDDA/SiO2复合薄膜. TEM图象显示,薄膜中的SiO2纳米粒子为密堆积,薄膜均匀、致密;电子衍射实验结果显示,所组装的薄膜为非晶态膜.载玻片表面组装SiO2纳米粒子薄膜后,透射率随薄膜双层数增加呈现周期变化.薄膜具有增透作用,载玻片双面组装薄膜后在一定波长范围内的透射率可提高5％以上. PDDA/SiO2复合薄膜的光学性质主要由SiO2纳米粒子决定,每一双层的平均物理厚度小于SiO2纳米粒子的粒径,薄膜中存在层间穿插现象,逐层组装的复合薄膜具有单层光学薄膜的特性.     

自组装纳米金膜上铂微/纳结构电催化剂的制备及性能

基于纳米金(AuNP)表面基团的静电自组装作用制备了多层有序的纳米金超薄膜. 研究了自组装纳米金超薄膜上铂微/纳结构催化剂(Pt/AuNP)的制备过程. 考察了沉积电位和沉积时间对甲酸电氧化活性的影响, 确定了最佳沉积电位为0 V, 最佳沉积时间为600 s. 同时对比考察了Pt/AuNP/PE/GCE, AuNP/PE/GCE和纯Pt电极在0.1 mol/L H2SO4介质中对甲酸电氧化活性以及载体对沉积物形态和甲酸氧化活性的影响. 研究结果表明, 纳米金组装体对铂的电沉积有明显的促进作用; Pt/AuNP/PE/GCE对甲酸的电氧化有很好的电催化性能.     

功能性超薄有序分子沉积膜的制备及其结构研究

1991年G.Decher等首次探讨了阴阳离子与聚电解质交替沉积制备有机超薄膜的方法。我们在完善成膜技术和发展成膜基质的基础上,详细研究了其成膜过程与膜的结构,并定义这种新的自组装超薄有序膜为分子沉积膜——MD膜。MD膜是利用阴阳离子的静电吸附反应特性,通过相反离子体系的交替分子沉积制备的层状有序自组装多层超薄膜。需要指出的是,分子沉积既是有机超薄膜的制备技术,本身又是一种自组装超薄有序膜。MD膜制备工艺简单,热稳定性和长期稳定性好,不受基体形状与面积限制。     

富勒醇与阳离子聚电解质复合薄膜的制备与表征

采用静电自组装技术制备了富勒醇与聚对亚苯亚乙烯基 (PPV)的前驱体、聚二烯丙基二甲基氯化铵(PDDA)的复合薄膜 ,利用紫外 可见光吸收光谱 (UV Vis)、原子力显微镜 (AFM )、透射电镜 (TEM)和X射线光电子能谱 (XPS)对薄膜进行了表征 .UV Vis吸收光谱显示 ,在特定波长下自组装薄膜的吸光度与薄膜的双层数成线性关系 ,组装过程具有一致性与重复性 .AFM图象显示富勒醇组装到基片表面后形成直径为几十到10 0多nm的团簇 .富勒醇溶液过滤后组装薄膜 ,薄膜具有较好的均匀性 ;富勒醇溶液不经过滤 ,直接组装薄膜 ,将在薄膜中引入C6 0 晶粒 .XPS分析结果提示C6 0 被羟基修饰并通过静电吸引机制与阳离子聚电解质组装成膜 .富勒醇与PPV的前驱体、PDDA具有很好的自组装性能 ,膜层间的结合力较强 ,所组装的薄膜具有较高的牢固度 .     

聚N-对羟苯基丙烯酰胺与重氮树脂的氢键自组装

1991年 Decher[1] 首先从带相反电荷的聚电解质 ,通过静电相互作用在基片上交替沉积形成超薄膜 ,这种通过静电作用形成超薄膜的方法称为静电自组装 .与 L- B膜技术相比 ,静电自组装不需要专用设备 ,一般在水体系进行 ,无污染 .此外 ,静电力比形成 L- B膜的范德华力强 ,从而使其自组装膜比 L- B膜要稳定 .由于这些优点 ,静电自组装技术近年来得到迅速发展 [2～ 8] .通过氢键作用形成超薄膜的方法 (氢键自组装 )是最近才发展起来的技术 . 1 997年 ,沈家骢等 [9,10 ] 通过静电吸引和氢键组装了有序超薄膜 .几乎同时 ,Rubner等 [11] 报道从…     

静电层层自组装制备聚苯乙烯微球(核)/MCM-41纳米粒子(壳)阶层结构复合微粒

采用聚苯乙烯磺酸钠(PSS)和聚二烯丙基二甲基氯化铵(PDDA)两种聚电解质, 通过静电层层自组装成功地将MCM-41介孔二氧化硅纳米粒子包覆到聚苯乙烯(PS)微球表面. 实验结果表明, 当以尺寸为1.4 μm的PS微球为核时, 包覆了两个聚电解质双层(PDDA/PSS)2的PS(PDDA/PSS)2(PDDA/MCM-41)复合结构微粒与包覆了一个聚电解质双层(PDDA/PSS)的PS(PDDA/PSS)(PDDA/MCM-41)复合结构微粒相比, 复合结构微粒之间的交联程度降低, 但是MCM-41纳米粒子在聚苯乙烯微球表面的包覆都比较松散, 且产物中存在大量杂质. 而当以尺寸为5 μm的聚苯乙烯微球为核时, MCM-41纳米粒子紧密地包覆在聚苯乙烯微球表面, 复合结构微粒之间只有少量桥连物, 且产物中杂质很少.     

聚(对乙烯基苯酚)的合成及其与重氮树脂的氢键自组装研究

带相反电荷的聚电解质,交替沉积在基片,形成超薄有序膜,通常称为静电自组装,自1991年由Decher首次阐明以来,静电自组装技术引起了广泛重视,利用氢键相互作用的氢键自组装1997年才有报道,沈家骢、张希等从聚丙烯酸和聚乙烯基吡啶通过氢键组装了有序超薄膜。和乙烯基吡啶通过氢键组装超薄膜的制备。由于静电力和氢键均很弱,此类膜对极性溶剂不稳定,如在DMF中会离解而遭破坏,我们曾报道重氮树脂（DR）与酚醛树脂间通过氢键的自组装,本文报道聚（对乙烯基苯酚）（PVPh）的制备及春与重氮树脂（DR）间的氢键相经作用,并结合光照,制备了对极性溶剂稳定的超薄膜。     

以CdS-ZnS核-壳量子点/聚酰胺-胺(PAMAM)树形分子纳米复合材料自组装制备发光超薄膜

制备了表面带负电荷的CdS-ZnS核-壳结构量子点/聚酰胺-胺(PAMAM)树形分子纳米复合材料, 并以其为阴离子, 以聚二甲基二丙烯基氯化铵(PDDA)为聚阳离子自组装制备了光致发光(PL)超薄膜. 对膜的生长均匀性、表面平整性及发光性能进行表征, 发现膜的UV-Vis吸收强度和PL强度随层数增加呈线性增大, 表明每层膜均匀生长; AFM照片表明单个复合层膜非常平整, 10层膜仍具有良好的平整度, 并发出明亮的蓝绿色光.     

Layer-by-layer deposited organic/inorganic hybrid multilayer films containing noncentrosymmetrically orientated azobenzene chromophores

Organic/inorganic hybrid multilayer films with noncentrosymmetrically orientated azobenzene chromophores were fabricated by the sequential deposition of ZrO2 layers by a surface sol-gel process and subsequent layer-by-layer (LbL) adsorption of the nonlinear optical (NLO)-active azobenzene-containing polyanion PAC-azoBNS and poly(diallyldimethylammonium chloride) (PDDA). Noncentrosymmetric orientation of the NLO-active azobenzene chromophores was achieved because of the strong repulsion between the negatively charged ZrO(2) and the sulfonate groups of the azobenzene chromophore in PAC-azoBNS. Regular deposition of ZrO(2)/PAC-azoBNS/PDDA multilayer films was verified by UV-vis absorption spectroscopy and quartz crystal microbalance measurements. Both UV-vis absorption spectroscopy and transmission second harmonic generation (SHG) measurements confirmed the noncentrosymmetric orientation of the azobenzene chromophores in the as-prepared ZrO2/PAC-azoBNS/PDDA multilayer films. The square root of the SHG signal (I(2omega)(1/2)) increases with the increase of the azobenzene graft ratio in PAC-azoBNS as the number of deposition cycles of the ZrO(2)/PAC-azoBNS/PDDA films remains the same, while the second-order susceptibility chi(zzz)(2) of the film decreases with the increase of the azobenzene graft ratio. Furthermore, the present method was successfully extended to realize the noncentrosymmetric orientation of azobenzene chromophores in multilayer films when small organic azobenzene compounds with carboxylic acid and/or hydroxyl groups at one end and sulfonate groups at the other end were used. The present method was characterized by its simplicity and flexibility in film preparation, and it is anticipated to be a facile way to fabricate second-order nonlinear optical film materials.     

Fabrication of free-standing multilayer films by using pH-responsive microgels as sacrificial layers

A facile way to prepare free-standing polyelectrolyte multilayer films of poly(sodium 4-styrenesulfonate)(PSS)/poly(diallyldimethylammonium)(PDDA) was developed by applying a new pH-dependent sacrificial system based on cross-linked poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) microgels. The tertiary amine groups of PDMAEMA microgels can be protonated in acidic environment, and the protonated microgels were deposited by layer-by-layer (LbL) technique with PSS. PSS/PDDA multilayer films were constructed on the top of the PSS/microgels sacrificial layers. The LbL assembly process was investigated by UV–vis spectroscopy. Further study shows that the free-standing PSS/PDDA multilayer films can be obtained within 3 min by treating the as-prepared films in alkali aqueous solution with a pH of 12.0. The pH-triggered exfoliation of PSS/PDDA multilayer films provides a simple and facile way to prepare LbL assembled free-standing multilayer films.     

Fabrication of Layer-by-layer Films of Polyhedral Oligomeric Silsesquioxanes

Layer-by-layer(LBL)self-assembly method was used to fabricate siliceous ultrathin films by using polyhedral oligomeric silsesquioxanes as building blocks.Ammonium salt of kctasilsesquioxane acid (OSi8) and bply(diallyldimethylammonium chloride)(PDDA) were altermately assembled onto CaF2 slide to form nanocomposite multilqyers,Linear build-up of the LBL films was confirmed by UV-Vis spectroscopy.IR spectrum suggests existence of OSi8 and PDDA in the LBL films.Atomic force microscopic surface topography of the LBL films indicates the OSi8 covers the entire surface of the topmost layer and shows a granular morphology.     

碳纳米管/聚二烯丙基二甲基氯化铵/磷钼酸复合膜的组装及其在溴酸盐检测中的应用

通过静电层层组装技术在玻碳(GC)电极表面制备{多壁碳纳米管(MWCNT)/聚二烯丙基二甲基氯化铵(PDDA)}n多层膜,并采用循环伏安法在多层膜的表面电化学修饰一层磷钼酸(PMo12)膜,构筑GC/{MWCNT/PDDA}n-PMo12复合膜修饰电极.利用SEM对比观察{MWCNT/PDDA}n和{PDDA/MWCNT}n-PMo12的微观结构,并研究该复合膜修饰电极的电化学及其对溴酸盐(BrO3-)电催化还原性质.在此基础上研发一种基于GC/{MWCNT/PDDA}n-PMo12复合膜修饰电极的电流型BrO3-传感器,该传感器表现出明显增大的响应电流.在最优的实验条件下,采用电流时间曲线(i-t)法考察该复合膜修饰电极对BrO3-的安培响应.实验结果表明,该传感器在BrO3-浓度为50～400nmol/L的范围内具有良好的线性关系,相关系数R2为0.9950,响应时间为1.53s,检出限为20nmol/L,灵敏度为13.81mA(mmol/L)-1cm-2.     

Comparative bioelectrochemical study of core-shell nanocluster films with ordinary layer-by-layer films containing heme proteins and CaCO3 nanoparticles

Negatively charged heme protein hemoglobin (Hb) or myoglobin (Mb) at pH 9.0 and positively charged poly(diallyldimethylammonium) (PDDA) were alternately adsorbed on the surface of CaCO(3) nanoparticles, forming core-shell CaCO(3)-[PDDA/(protein/PDDA)(m)] ([protein-m]) nanoclusters. Oppositely charged [protein-m] and poly(styrenesulfonate) (PSS) were then assembled layer by layer on various solid substrates, forming {[protein-m]/PSS}(n) films. In the meantime, ordinary layer-by-layer films of heme proteins with CaCO(3) nanoparticles ({protein/CaCO(3)}(n)) were also grown on solid surfaces. Transmission electron microscopy (TEM), ultraviolet-visible (UV-vis) spectroscopy, quartz crystal microbalance (QCM), and cyclic voltammetry (CV) were used to characterize the nanoclusters and monitor the growth of the two types of films. Both kinds of protein films assembled on pyrolytic graphite (PG) electrodes exhibited well-defined, nearly reversible CV reduction-oxidation peaks, characteristic of heme Fe(III)/Fe(II) redox couples, and were used to catalyze the electrochemical reduction of hydrogen peroxide. The {[protein-m]/PSS}(n) films demonstrate distinct advantages over the {protein/CaCO(3)}(n) films due to their larger fraction of electroactive proteins, higher catalytic efficiency, and better thermostability. The penetration experiments of the electroactive probe into these films indicate that the {[protein-m]/PSS}(n) nanocluster films possess more pores or channels than the simple {protein/CaCO(3)}(n) films, which may be beneficial to counterion transport in the charge-hopping mechanism and helpful for the diffusion of catalysis substrates into the films. In addition, the electrochemical and biocatalytic activity of protein nanocluster films can be tailored by controlling the number of bilayers assembled on the nanoparticle cores (m) as well as the film thickness or the number of nanocluster layers on the electrodes (n).     

石墨烯/银复合薄膜的制备及表征

采用静电自组装技术,通过交替沉积聚(二烯丙基二甲基氯化铵)(PDDA)(或硝酸银)和氧化石墨烯,制备氧化石墨烯/PDDA薄膜和氧化石墨烯/硝酸银复合薄膜。然后在600℃下通入氩气和氢气进行气氛还原得到石墨烯薄膜和石墨烯/银复合薄膜。采用AFM、SEM、XPS、UV-Vis以及四探针电阻仪等对薄膜结构及性质进行表征。结果表明,通过静电自组装法可以获得生长均匀的薄膜。对比于相同自组装次数的石墨烯薄膜,石墨烯/银复合薄膜具有更好的透光性和更低的薄膜方块电阻。在λ=500 nm时,四层石墨烯/银复合薄膜的透过率为85%左右,而石墨烯薄膜的透过率为72%左右;石墨烯薄膜的方阻为161.39 kΩ.□-1,而石墨烯/银复合薄膜的方阻为99.11 kΩ.□-1。