具有好的溶解性和高的热稳定性的富勒烯-苝化合物的合成

在氩气保护下,利用N-(正丁基)-N’(4-甲酰基苯氧戊基)-1．6,7,12-四-(4-叔丁基苯氧基)-3,4,9,10-苝酰亚胺和N-甲基甘氨酸产生的亚胺叶立德与富勒烯反应,合成了含富勒烯的苝化合物,用NMR、FT—IR、UV-Vis及TGA等方法对其结构和性能进行了表征和测试。研究结果表明此类化合物具有好的溶解性和高的热稳定性。     

酯的水解实验的改进

该文对现行的高中化学 (试验修订本 )第二册中关于乙酸乙酯水解实验的不足之处进行了分析,并提出了改进的方法,对其实验内容和实验效果进行了讨论。     

地球的内部可能是湿润的

在地球的低层地幔下 ,可能存在着比现在的海洋还要多 4倍的水 ,这是日本工业大学的Ｍ .Ｍｕｒａｋａｍｉ和他的同事们最近估测出来的。日本地球科学家们利用了一种多功能钻探仪 ,通过对 3种据信包含低层地幔中在高温高压下生成的主要矿物组成的分析后 ,得到了这个结论。这 3种矿物是 :Ｍｇ ｐｅｒｏｖｓｋｉｔｅ ,Ｃａ ｐｅｒｏｖｓｋｉｔｅ和Ｍａｇｎｅｓｉｏｗ櫣ｓｔｉｔｅ。再利用ＳＩＭＳ对矿物中溶解的氢的含量进行测量 ,矿物学家认为氢是水的标记。发现这3种矿物的含水量都相当可观 ,大约在 0 .2 %至 0 .4 %(重量比率 )之间。用红外…     

基于压力的速率方程的应用

通过具体实例说明对于气相反应,使用基于压力的速率方程解题比使用基于浓度的速率方程更直接﹑更简便。总结了具有简单级数的反应的基于压力的速率方程及其特征。     

铁的吸氧腐蚀实验的改进

正1问题的提出化学实验是化学教学的生命线,在课堂教学中发挥着重要的认识论功能、方法论功能和教学论功能[1]。笔者在利用教科书中铁的吸氧腐蚀实验[2]进行教学时,如图1,发现该实验仅能让学生体会吸氧腐蚀的吸氧过程,而更核心的电化学过程却无法感受到。通过查阅近年文献,发现同仁们对该实验的研究更多关注如何缩短实验所用时间[3-6]。即便     

糖基修饰的氨基酸类化合物的合成

通过对5种氨基酸酯化和氨基保护得到苄氧羰基氨基酸甲酯, 经肼解制备苄氧羰基氨基酸酰肼, 然后分别与3种不同的糖基异硫氰酸酯反应, 制备了相应的目标化合物15个, 且产率均在60%以上. 所有新化合物均经元素分析, IR, MS和¹H NMR确证. 同时探索了苄氧羰基氨基酸甲酯肼解的最佳反应条件.     

基于Matlab的二元共聚合反应的竞聚率的求解

以直线交叉法为依据,根据最小二乘原理,采用Matlab GUI工具设计了一款用于计算二元共聚合反应竞聚率的图形用户程序。与传统的求解竞聚率方法相比,该图形用户程序具有设计原理简单、计算快捷的特点;同时程序提供界面简洁、交互友好的数据输入平台,实用性强。实际应用表明:采用该款图形用户程序所测得的数据与微机动态搜索法、Tidwell-Mortimer法相近,而比采用斜率截距法计算竞聚率的最小差方和更小,并且也避免了采用斜率截距法由于所用方程的非对称性造成的计算结果的不一致性。     

Maillard反应的高分子产物的研究进展

Maillard反应产物由于其天然性和独特的香味,使其在食品和烟草领域的应用倍受关注.目前,对Maillard反应产物中的小分子化合物的研究已经比较透彻,但是高分子产物的结构及形成机理尚不清楚.虽然Maillard高分子产物及其复杂,但人们通过膜透析、凝胶柱层析等分离方法,对其提纯分级后,再运用凝胶渗透色谱、元素分析、放射性同位素标记、紫外-可见光谱、红外光谱、核磁共振(NMR)、热裂解等分析手段对其进行表征,对Maillard高分子产物的结构和形成机理有了一定的了解.本文对Maillard反应的高分子产物的分离提纯方法、分析表征方法和分子结构的假设模型三方面的研究进展进行了综述.     

基于环糊精的新材料的研究进展

从纳米粒子、水凝胶、纤维材料和环糊精高分子等方面介绍了近年来以环糊精为基础研制的新材料的研究进展。目前以环糊精为基础的纳米粒子材料有核壳结构的纳米粒子、环糊精的化学接枝与共聚、环糊精与无机非金属材料的复合和含环糊精的囊泡材料;以环糊精为基础的凝胶材料有水凝胶和有机凝胶两种材料;此外还有以环糊精为基础的纤维材料、环糊精高...     

某些助剂对明胶的凝胶强度的影响的研究

众所周知,物理力学性能是照相明胶的一种很重要的属性。在各种彩色及黑白胶片都面向高温快速加工发展的今天,这种属性就显得更为重要。提高胶片的物理力学性能,一方面要从提高明胶本身的胶冻强度着手,例如减少明胶中溶胶组份(分子量小、冷水中溶解度高),提高明胶中的α和β组份的相对含量,减少分子量过大的组份等等。     

锌蒸气的氧化行为与氧化锌的结晶形貌

用热重法测定了不同气氛下锌蒸气的氧化动力学曲线,用扫描电镜跟踪观察分析了产物的结晶形貌,结果表明,氧化动力学遵守直线规律时,产物是无定形、颗粒状和单针状的ZnO;氧化动力学为抛物线规律时,产物是四针状或多针状的ZnO.动力学转变规律的原因是锌蒸气中气态锌原子与凝聚生成的锌液滴之间存在动态平衡,气态锌原子的氧化过程遵守直线规律;而锌液滴的氧化过程分为两个阶段,分别受收缩球状界面反应模型R₃和三维扩散模型D4动力学控制,表观活化能分别为106.3～108.2和114.2～117.3kJ/mol;扩散过程实际上是锌原子通过氧化膜层由里向外扩散,扩散系数D=2.46～9.70×10^-5cm²/s.     

Catalytic antibodies induced by a zwitterionic hapten

A zwitterionic hapten 4 featuring both positively and negatively charged functional groups was designed and synthesized with the goal of generating catalytic antibodies for the hydrolysis of ester 6 and amide 7. Of the 36 monoclonal antibodies specific to BSA-4 (bovine serum albumin) that were isolated, six accelerated the hydrolysis of 6. Two catalytic antibodies with distinctively different and representative kinetic behaviors were selected for detailed kinetic studies. Whereas H8-2-6F11 showed burst kinetic behavior, which can be attributed to the formation of an acyl intermediate, H8-1-2D5 did not, but it did exhibit high multiple turnover activity. The rate of hydrolysis of 6 catalyzed by H8-1-2D5 followed Michaelis-Menten kinetics; the apparent values of the Michaelis-Menten constant Km and the catalytic constant kcat were 488 microM and 3.5 min(-1), respectively. The catalytic rate enhancement (kcat/kun) observed for H8-1-2D5 was 1.3 x 10(5), which is approximately two orders of magnitude greater than those for monofunctional haptens. Thus H8-1-2D5 compares well in catalytic activity with antibodies isolated by a related approach called heterologous immunization.     

金的离子交换与吸附化学 II: 大孔交联聚甲基丙烯酸酯MET-802对AuCl4^-的吸附及解吸动力学

研究了大孔交联聚甲基丙烯酸酯树脂(相当于Amberlite-XAD-7)吸附和解吸AuCl4^-的动力学. 结果表明, 两种过程均由液膜扩散转向粒内扩散主控. HCl浓度对吸附AuCl4^-过程影响甚微, 研究了HCl-硫脲为解吸剂时的动力学, 表明液膜扩散常数R和粒内扩散常数B对树脂半径r0的关系服从Boyd方程.     

Kinetics of dissociation of molecular oxygen from a superoxorhodium(III) complex and reactivity of a macrocyclic rhodium(II) ion

The kinetics of disappearance of the superoxorhodium complex L2(H2O)RhOO2+ (L2 = meso-hexamethylcyclam) were determined in the presence of several oxidants (H2O2, (NH3)5CoBr2+, and IrCl62-) in both air-free and air-saturated aqueous solutions. Under air-free conditions, the reaction obeyed first-order kinetics. After the correction for the appropriate stoichiometric factors, the value of the rate constant kh was the same irrespective of the oxidant, kh = 2.18 (+/-0.37) x 10(-4) s(-1) at 25.0 degrees C in acidic solutions. The disappearance of L2(H2O)RhOO2+ was slower in the presence of O2. All the data suggest a sequence of reactions beginning with homolytic dissociation of O2 from L2(H2O)RhOO2+, followed by capture of the newly generated L2(H2O)Rh2+ by added oxidants in competition with O2. The equilibrium constant for O2 binding by L2(H2O)Rh2+ is 109-fold greater than that for the cobalt analogue. This difference is attributed to the lower reduction potential of the rhodium complex.     

S-oxygenation of thiocarbamides IV: Kinetics of oxidation of tetramethylthiourea by aqueous bromine and acidic bromate

The kinetics and mechanism of oxidation of tetramethylthiourea (TTTU) by bromine and acidic bromate has been studied in aqueous media. The kinetics of reaction of bromate with TTTU was characterized by an induction period followed by formation of bromine. The reaction stoichiometry was determined to be 4BrO(3)(-) + 3(R)(2)C═S + 3H(2)O → 4Br(-) + 3(R)(2)C═O + 3SO(4)(2-) + 6H(+). For the reaction of TTTU with bromine, a 4:1 stoichiometric ratio of bromine to TTTU was obtained with 4Br(2) + (R)(2)C═S + 5H(2)O → 8Br(-) + SO(4)(2-) + (R)(2)C═O + 10H(+). The oxidation pathway went through the formation of tetramethythiourea sulfenic acid as evidenced by the electrospray ionization mass spectrum of the dynamic reaction solution. This S-oxide was then oxidized to produce tetramethylurea and sulfate as final products of reaction. There was no evidence for the formation of the sulfinic and sulfonic acids in the oxidation pathway. This implicates the sulfoxylate anion as a precursor to formation of sulfate. In aerobic conditions, this anion can unleash a series of genotoxic reactive oxygen species which can explain TTTU's observed toxicity. A bimolecular rate constant of 5.33 ± 0.32 M(-1) s(-1) for the direct reaction of TTTU with bromine was obtained.     

In situ gelling hexagonal phases for sustained release of an anti-addiction drug

In this study, fluid precursor formulations for subcutaneous injection and in situ formation of hexagonal phase gels upon water absorption were developed as a strategy to sustain the release of naltrexone, a drug used for treatment of drug addiction. Precursor formulations were obtained by combining BRIJ 97 with propylene glycol (PG, 5-70%, w/w). To study the phase behavior of these formulations, water was added at 10-90% (w/w), and the resulting systems were characterized by polarized light microscopy. Two precursor formulations containing BRIJ:PG at 95:5 (w/w, referred to as BRIJ-95) and at 80:20 (w/w, referred to as BRIJ-80) were chosen. Naltrexone was dissolved at 1% or suspended at 5% (w/w). Precursor formulations were transformed into hexagonal phases when water content exceeded 20%. Water uptake followed second-order kinetics, and after 2-4h all precursor formulations were transformed into hexagonal phases. Drug release was prolonged by the precursor formulations (compared to a drug solution in PBS), and followed pseudo-first order kinetics regardless of naltrexone concentration. The release from BRIJ-80 was significantly higher than that from BRIJ-95 after 48 h. The relative safety of the precursor formulations was assessed in cultured fibroblasts. Even though BRIJ-95 was more cytotoxic than BRIJ-80, both precursor formulations were significantly less cytotoxic than sodium lauryl sulfate (considered moderate-to-severe irritant) at the same concentration (up to 50 μg/mL). These results suggest the potential of BRIJ-based precursor formulations for sustained naltrexone release.     

Dihydrogen Evolution by Protonation Reactions of Nickel(I)

Nickel-mediated formation of H(2) by protonation of Ni(I) has been established and the kinetics of the process investigated. The diamagnetic complex [Ni(II)(psnet)](BF(4))(2) was prepared and reduced to [Ni(I)(psnet)](BF(4)) with NaBH(4) in THF (psnet = bis(5-(diphenylphosphino)-3-thiapentanyl)amine). Both complexes were structurally characterized by X-ray diffraction. [Ni(psnet)](1+) was demonstrated to be an authentic Ni(I) complex with a.(d(z)()2)(1) ground state. Under appropriate conditions, [Ni(psnet)](+) reacts with acids in nonaqueous media to give near-quantitative yields of H(2) according to the stoichiometry Ni(I) + H(+) --> Ni(II) + (1)/(2)H(2). Dihydrogen production was demonstrated to be directly related to Ni(I) oxidation. The reaction system [Ni(psnet)](+)/HCl/DMF, which gives H(2) yields of greater, similar90%, was subjected to a kinetics analysis. The overall reaction [Ni(psnet)](+) + HCl --> [Ni(psnet)Cl](+) + (1)/(2)H(2) proceeds by two parallel pathways dependent on chloride concentration. Addition of Bu(4)NCl accelerates the reaction, whereas (Bu(4)N)(PF(6)) decreases the rate. A two-term rate law is presented which includes contributions from both pathways, whose common initial step is protonation of Ni(I). Path A (low chloride concentration) involves the formation and collapse of nickel hydride chloride ion pairs; the rate-determining step is the minimal reaction 2Ni(III)-H(-) --> H(2) + 2Ni(II). Path B (high chloride concentration) includes as the rate-limiting step collapse of a nickel hydride dichloride ion pair followed by the bimolecular reaction of two Ni(III)-H(-) intermediates or reduction to Ni(II)-H(-) by Ni(I) followed by protonation of the hydride. The relation of these results to the reactions of hydrogenase enzymes is considered.     

Synthesis and characterization of polystyrene/2-(5-chloro-2H-benzotriazole-2-yl)-6-(1,1- dimethylethyl)-4-methyl-phenol composite microspheres of narrow size distribution for UV irradiation protection

Polystyrene (PS) UV absorber microspheres of narrow size distribution have been prepared in two ways: (1) Entrapment of the UV absorber molecule, 2-(5-chloro-2H-benzotriazole-2-yl)-6-(1, 1-dimethylethyl)-4-methyl-phenol) [TINUVIN? 326] within uniform PS template microspheres by swelling these template particles with methylene chloride emulsion droplets containing the TINUVIN, followed by evaporation of the methylene chloride from the swollen PS microspheres. (2) A similar swelling process, substituting the methylene chloride emulsion droplets containing the TINUVIN for methylene chloride emulsion droplets containing the monomers, divinyl benzene (DVB) and styrene (S) and the initiator, benzoyl peroxide and TINUVIN. The monomers within the swollen microspheres were then polymerized by elevating the temperature of the swollen particles to 73?°C. The influence of the weight ratio [TINUVIN]/[PS] on the entrapped percentage of TINUVIN was elucidated. Polyethylene/TINUVIN, PE/(PS/TINUVIN), and PE/(PS/P(S-DVB-TINUVIN)) resins and films were prepared by melt blending of low-density PE with TINUVIN and with the UV absorber microspheres, followed by a tubular blown process. The UV absorption of these composite films was demonstrated. The leakage kinetics of the TINUVIN from these composite films was according to the following order: PE/(PS/P(S-DVB-TINUVIN))?<?PE/(PS/TINUVIN)?<?PE/TINUVIN.

Mechanisms of hydrolysis of phenyl- and benzyl 4-nitrophenyl-sulfamate esters

The kinetics of hydrolysis at medium acid strength (pH interval 2-5) of a series of phenylsulfamate esters 1 have been studied and they have been found to react by an associative S(N)2(S) mechanism with water acting as a nucleophile attacking at sulfur, cleaving the S-O bond with simultaneous formation of a new S-O bond to the oxygen of a water molecule leading to sulfamic acid and phenol as products. In neutral to moderate alkaline solution (pH ≥ ~ 6-9) a dissociative (E1cB) route is followed that involves i) ionization of the amino group followed by ii) unimolecular expulsion of the leaving group from the ionized ester to give N-sulfonylamine [HN=SO(2)] as an intermediate. In more alkaline solution further ionization of the conjugate base of the ester occurs to give a dianionic species which expels the aryloxide leaving group to yield the novel N-sulfonylamine anion [(-)N=SO(2)]; in a final step, rapid attack of hydroxide ion or a water molecule on it leads again to sulfamic acid. A series of substituted benzyl 4-nitrophenylsulfamate esters 4 were hydrolysed in the pH range 6.4-14, giving rise to a Hammett relationship whose reaction constant is shown to be consistent with the E1cB mechanism.     

Removal of 2,4-dichlorophenoxyacetic acid by calcined Zn-Al-Zr layered double hydroxide

The adsorption equilibrium, kinetics, and thermodynamics of removal of 2,4-dichlorophenoxy-acetic acid (2,4-D) from aqueous solutions by a calcined Zn-Al layered double hydroxide incorporated with Zr(4+) were studied with respect to time, temperature, pH, and initial 2,4-D concentration. Zr(4+) incorporation into the LDH was used to enhance 2,4-D uptake by creating higher positive charges and surface/layer modification of the adsorbent. The LDH was capable of removing up to 98% of 2,4-D from 5 to 400 ppm aqueous at adsorbent dosages of 500 and 5000 mg L(-1). The adsorption was described by a Langmuir-type isotherm. The percentage 2,4-D removed was directly proportional to the adsorbent dosage and was optimized with 8% Zr(4+) ion content, relative to the total metals (Zr(4+)+Al(3+)+Zn(2+)). Selected mass transfer and kinetic models were applied to the experimental data to examine uptake mechanism. The boundary layer and intra-particle diffusion played important roles in the adsorption mechanisms of 2,4-D, and the kinetics followed a pseudo-second order kinetic model with an enthalpy, ΔH(ads) of -27.7±0.9 kJ mol(-1). Regeneration studies showed a 6% reduction in 2,4-D uptake capacity over six adsorption-desorption cycles when exposed to an analyte concentration of 100 ppm.