高效毛细管电泳电导检测器的研制

研制了一种毛细管电泳电导检测器。采用激光烧蚀毛细管涂层、HF腐蚀和阴离子交换膜封堵制作在柱导电接口连接电泳毛细管和电导池,高压电场被有效隔离,以铂丝为工作电极实现柱后电导检测,在内径为50μm毛细管上分离检测了几种氨酸和金属离子,结果表明该系统性能优良。     

毛细管电泳柱端安培检测装置的研制

研制了一种新型的毛细管电泳柱端型安培检测装置。以直径为6μm的碳纤维微电极为工作电极,在自组装的ACS-2000毛细管电泳仪上,考察了用不同内径毛细管分离时分离电压对背景噪声的影响。利用该装置同时测定了3种苯二酚的异构体。     

高效毛细管电泳安培检测器的研制

介绍了一种结构简单的毛细管电泳安培检测器。该检测器通过一只内径与毛细管外径相仿的不锈钢针头作分离毛细管与毛细管工作电极的导引管解决了工作电极与分离毛细管的对接 毛细管碳糊电极为工作电极,在内径为５０μｍ毛线管邮几种酚类化合物,结果表明该系统性能优良。     

单分子毛细管电泳

对室温下液流中的单分子光学检测技术的基本原理、主要方法以及它在生物学中的应用做了综述。重点强调了毛细管电泳与单分子检测相结合-单分子毛细管电泳在分析科学中战略上的重要性，并展望了单分子光学检测技术为特征的单分子毛细管电泳在分析化学中的应用前景。     

毛细管电泳-柱端安培检测中分离毛细管与检测电极对接方式比较的研究

针对目前毛细管电泳中普遍采用的水平式和直立式两种柱端安培检测形式,在各种可能的对接角度下,以邻苯二酚、间苯二酚和对苯二酚3种二酚作为分离分析测试对象,对分离毛细管与检测电极的对接方式进行了优化比较,并对每一种对接方式的分析特性进行了测试。结果表明：在以3种典型的方式对接时,分离毛细管与检测电极为倒直立式对接时,获得的检测灵敏度最高,响应电流最大,水平式次之,直立式最小。     

毛细管电泳用于形态分析

一种元素的生物可给性、环境行为和迁移性在很大程度上取决于它的形态。如不同的键合形式或氧化态，因此，作为元素物种鉴别和含量测定的形态分析变得越来越重要。毛细管电泳作为一种分离分析技术有许多优点可以满足形态分析的要求。本文从样品的预处理、毛细管电泳的修饰、进样方式、分离模式和检测等几个方面评述了毛细管电泳在形态分析中的应用。     

高效毛细管电泳的电导检测和紫外光度检测研究

本文自制商效毛细管电泳装置.研究了毛细管区带电泳电导检测和毛细管胶束电动色谱紫外光度检测。在电导检测中,制作铂丝微电导池,并由用电池隔膜制作的导电接口连接电泳毛细管和电导池,高压被有效隔离,实现柱后电导检测,用内径200μm、长70cm(到接口)石英毛细管在10kV电压下分离检测Li~-、Na~-、K~-。在电动色谱中将高效液相色谱仪与高压电源组成电泳装置,用内径100μm,长50cm(到检测器)石英毛细管和SDS胶束溶液在14kV电压下分离检测电中性化合物。     

毛细管电泳-柱端电化学检测池的设计

在射壁式检测器的基规上,设计了一种用于毛细管电泳-电化学检测装置的检测池,巧妙地利用因表面张力现象而留驻波滴曲面的放大作用,直接调整毛细管与电极之间的相对位置,无需显微镜-微调节器装置,具有空间体积小,操作更简便的优点。     

集成芯片毛细管电泳电化学检测系统

研制了一种新颖的集成芯片毛细管电泳电化学检测装置。此装置基于柱末安培检测法，将检测池集成芯片上，以自制的30μmPt微盘电极为工作电极，在几十年秒钟内实现了多巴胺、5－羟色胺和肾上腺素三种神经递质的快速分离检测。     

高效毛细管电泳中的激光光热检测技术

集中介绍了激光光热分析在高效毛细管电泳检测上的应用；分析了各种光热检测构型的特点，阐述了影响光热信号的各种因素；指出了激光光热检测技术在高效毛细管电泳中的应用前景。     

A New Capillary Electrophoresis Apparatus with Piezoelectric Ceramics High Voltage Source and Amperometric Detector

IntroductionHighperformancecapiliar}'electrophoresis(HPCE)isanewanalyticaltechnology'rapidly'developedinrecentyears.Withtheadvantagesofsmallsample.highsensitivity,highresolution.rapidanalysisandverycheaprunning,ithasbeenappliedinchemistry'.lifescienc...     

Splitless on-line coupling of capillary high-performance liquid chromatography,capillary electrochromatography and pressurized capillary electrochromatography with nuclear magnetic resonance spectroscopy

A mixture of unsaturated fatty acid methyl esters was separated with a new splitless capillary set-up. With the employed apparatus configuration different capillary separation techniques such as capillary high-performance liquid chromatography (cHPLC), capillary electrochromatography (CEC) and pressurized capillary electrochromatography (pCEC) could be applied. The detection and identification of the sample compounds were accomplished by hyphenating these capillary separation techniques with nuclear magnetic resonance (NMR) spectroscopy using a novel configuration of the detection capillary set-up. Using modified electrokinetically driven separation techniques, the electric field was applied solely across the separation column. With this improved interface for capillary liquid chromatography-NMR on-line coupling, the stereochemical assignment of the cis and trans configuration of unsaturated fatty acids could be easily accomplished. Finally, the results of cHPLC-NMR, CEC-NMR and pCEC-NMR coupling experiments were compared.Dedicated to Professor Günter Häfelinger on the occasion of his 65th birthday     

一种多通道匀浆装填毛细管色谱柱的新装置及应用

针对目前毛细管色谱柱装柱效率低、不同批次装填的毛细管色谱柱之间性能差异大的问题,我们发展了一种多通道匀浆装填毛细管色谱柱的新装置。该装置以液相色谱泵提供压力、采用磁力搅拌保持匀浆液均匀分散,一次可装填多达6根毛细管色谱柱。以牛血清白蛋白(BSA)的胰蛋白酶酶切肽段混合物为样本,选择峰容量、蛋白覆盖率、3个特定离子的保留时间以及毛细管色谱柱柱压为指标,在毛细管液相色谱-质谱联用系统上对装填的反相毛细管色谱柱的性能进行了评价。分别考察了一次装填的6根毛细管色谱柱、两次装填的12根毛细管色谱柱以及一次装填1根与一次装填6根毛细管色谱柱的性能及稳定性。实验结果表明:同一批次装填的6根毛细管色谱柱的性能相近;不同批次装填的12根毛细管色谱柱的峰容量和覆盖率没有明显的区别,但保留时间和毛细管色谱柱柱压的稳定性较差;一次装填1根和一次装填6根毛细管色谱柱柱性能的稳定性与两次分别装填6根毛细管色谱柱的稳定性相近,即采用本装置可显著提高毛细管色谱柱的装填效率且每次装填毛细管色谱柱的数量不会对柱性能产生影响。     

新型富集仪的研制及其实验教学应用

报道了新型实验教学仪器——"毛细管电泳富集仪"的研制及实验教学开发应用。对该仪器的工作原理、仪器性能、工作参数以及实际富集效果和教学应用进行了详细的说明和讨论,对于影响样品富集效果的各个因素进行了探讨。实验结果表明,该仪器的实际富集因子可达560倍。采用研制的毛细管电泳富集仪对原有实验进行深度开发,深化和丰富了仪器分析实验的实验教学内容。     

一种简单的毛细管色谱柱电加热装置的制作方法及其在液相色谱-质谱联用系统中的应用

为了实现蛋白质组的深度覆盖,特别是低丰度蛋白质的定性鉴定和定量分析,目前常用的方法是采用更长或装填更小粒径填料的毛细管色谱柱,但因此带来的问题是色谱柱反向柱压显著升高。针对以上问题发展了一种简单的毛细管色谱柱电加热装置制作方法,并将该装置安装于液相色谱-质谱联用系统,分别以牛血清白蛋白(BSA)酶切肽段混合物和酵母蛋白(yeast)酶切肽段混合物为样品,从柱压和柱效两方面对该装置的性能进行了评价。实验结果表明,所制作的毛细管柱电加热装置安装在装填粒径为3 μm反相色谱填料的毛细管柱上,在最佳电流(100 mA)下对BSA及yeast酶切肽段混合物进行分离时的柱压比不加电流时的柱压降低至少50%,柱效略有升高。这说明所制作的毛细管色谱柱电加热装置能显著降低柱压,为在较低的柱压条件下选择更小粒径色谱颗粒填料的毛细管色谱柱提供了一种有效的方法。     

Miniaturization of capillary electrochromatography using an ultrashort capillary column

The instrumentation for miniaturization of capillary electrochromatography was devised and an injection method for this apparatus was proposed. By using an ultra short capillary column (15 mm packed length, 36 mm total length, 75 microm inner diameter, packed with cation exchange supports), the separation of five biochemical compounds was performed within 1 min. The high separation efficiency of 9780 plates was achieved by using an ultrashort capillary column. The miniaturized instrumentation for capillary electrochromatography might be utilized as one of the possible methods in microfabricated analysis or in an alternative approach to it.     

Optimization of a modified aerospray deposition device for the preparation of samples for quantitative analysis by MALDI-TOFMS

A modified aerospray apparatus was used to prepare a thin layer sample of matrix and analyte for quantitative analysis by MALDI-TOFMS. The apparatus consists of a set of coaxial tubing; the liquid sample is forced by a syringe pump through the inner capillary and it is nebulized by a flow of gas through the outer capillary. The small droplets of sample exiting the device are deposited onto a rotating plate, which serves as the sample surface for a time-of-flight mass spectrometer. An optimization was carried out after initial experiments with the device resulted in poorer than expected reproducibility of analyte signal. A two-level plus center point factorial experiment was performed investigating several factors, including the inner capillary internal diameter, gas pressure, liquid flow, spray distance, and time. After optimization the within-sample reproducibility of the analyte signal improved 3-fold, while the sample-to-sample reproducibility improved 4.5-fold.     

Determination of 2,4-D and Dicamba in food crops by MEKC

Summary The determination of 2,4-D (2,4-dichlorophenoxyacetic acid) and Dicamba (2-methoxy-3,6-dichlorobenzoic acid) residues in sugar cane, rice and corn was performed by a supercritical fluid extraction (SFE) method using CO₂/acetone as extraction mix and an SFE apparatus developed in our laboratory. The extracts were cleaned up after extraction by both liquid-liquid partition and a Florisil column. Micellar electrokinetic capillary chromatography (MEKC) coupled with ultraviolet on-column detection was used for the analysis of these pesticides. The detection limits were improved by the preparation of a special detection cell with an increased pathlength that gave detection limits of ca. 0.6 pg for 2,4-D and Dicamba. Our results demonstrated that capillary electrophoresis can be a powerful new analytical tool for pesticide residue analysis.     

Capillary electrophoresis-chemiluminescence detection system equipped with a consecutive sample-injection device.

We have developed a consecutive sample-injection device for capillary electrophoresis, which comprises one four-way cock, two syringe pumps, and an interface part taking advantage of two three-way Teflon joints. Sample introduction into the capillary is made hydrodynamically by pressure, caused by the flow of the sample solution at the tip of the capillary inlet. We combined the injection device with a capillary electrophoresis-chemiluminescence detection system. A mixture solution of N-(4-aminobutyl)-N-ethylisoluminol, isoluminol isothiocyanate, and luminol was analyzed as a model sample by the present system. The sample solution was consecutively injected and detected with about a 230 s interval. The present capillary electrophoresis-chemiluminescence detection system with the consecutive sample injection device features easy and rapid operation, an inexpensive apparatus, high sensitivity, as well as consecutive analysis.     

A new sequential injection analysis‐capillary electrophoresis system with amperometric detection

A novel and fully automated sequential injection analysis manifold coupled to a capillary electrophoresis apparatus with amperometric detection, is described. The sequential injection manifold was isolated from the high voltage by inserting an air plug into the circuit. Small buffer reservoirs were used to avoid the need to pump fresh buffer to the interface during the electrophoretic separation. No decoupling device was used to mitigate the interference from the high voltage electric field, instead the potential shift induced by the separation voltage, was accounted for. The new hydrodynamic injection method presented is based on the overpressure created in the circuit when a pinch valve is closed for a predetermined time. The injection method yields RSD values of peak height and area below 2.55 and 1.82%, respectively, at different durations of valve closure (n = 5). The capillary and working electrode alignment was achieved by adapting a commercial available capillary union. When the electrode was replaced, the alignment method proved to be very reliable, yielding RSD values of peak height and area lower than 2.64 and 2.08%, respectively (n = 8). Using this system with a gold microelectrode, dopamine, and epinephrine could be quantified within the concentration range of 1–500 μM and detected at a concentration of 0.3 μM. The methods here presented could be applied for the development of new capillary electrophoresis systems with amperometric detection and/or to the design of fully automated systems for online process monitoring purposes.