磁性碳包铁纳米粒子在重金属元素检测分离富集中的应用

以氩电弧等离子体法制备的碳包铁纳米粒子为固相萃取材料,采用等离子体原子发射光谱法(ICP-AES)系统研究了该材料对Cr、Ni、Cd、Pb离子的吸附性能,并确定了最佳吸附和洗脱条件。实验结果表明:当pH值为8.0～9.0时,分析物均可被碳包铁纳米粒子定量吸附;采用酸性溶液(pH=1.0～2.0)可将吸附在碳包铁纳米粒子上的金属离子完全脱附。该法对Cr、Ni、Cd、Pb的检出限分别为3.6、4.1、1.1、9.8μg/L,Cr、Ni、Cd的线性范围为1～500μg.L-1,Pb的线性范围为10～1 000μg.L-1,线性相关系数均大于0.999。方法用于自来水中Cr、Ni、Cd、Pb离子的测定,回收率可达到93%～105%;碳包铁纳米粒子对Cr、Ni、Cd、Pb离子的吸附量分别为3.6、4.8、6.3、2.1 mg/g。     

微波消解-电感耦合等离子体质谱法测定人面果树中的重金属元素

建立了微波消解-电感耦合等离子体质谱(ICP-MS)法测定人面果树中As,Cr,Cd,Pb,Ni,Se,Hg 7种重金属元素含量的方法。样品采用HNO3-H2O2消解体系,避免了赶酸的操作,经微波消解后,用电感耦合等离子体质谱(ICP-MS)测定样品中As,Cr,Cd,Pb,Ni,Se,Hg 7种重金属元素的含量。方法对7种元素的校准曲线的相关系数r>0.9997,检出限在0.0098～0.0874μg/L之间,回收率在93%～115%之间,RSD在0.41%～4.9%。     

高压微波消解-电感耦合等离子体质谱(ICP-MS)法测定小米样品中铜铅锌镉铬镍砷

准确测定小米中的重金属对控制和提高食品安全具有非常重要的意义。采用高压微波消解法以HF-H2O2体系处理样品,选择52Cr、60Ni、63Cu、66Zn、75As、111Cd、208Pb为测量同位素,采用He气模式的碰撞反应池技术测定Cr和As,采用仪器自带干扰校正公式对Cd的测定结果进行校正,建立了电感耦合等离子体质谱(ICP-MS)法测定小米样品中Cu、Pb、Zn、Cd、Cr、Ni、As的方法。重点对溶样条件进行了优化,结果表明在优化的实验条件下,校准曲线的相关系数均不小于0.999 7,检出限为0.0005~0.010 μg/g,测定下限为0.002~0.40 μg/g。按照实验方法对小米成分分析标准物质中Cu、Pb、Zn、Cd、Cr、Ni、As平行测定12次,各元素测定值与认定值基本一致,相对标准偏差（RSD）均在7.0%以内。采用实验方法对蔚县小米样品进行分析,结果表明本方法灵敏度高,重现性好,定量准确,可用于大批量小米样品的测定。     

ICP-AES法测定化妆品中铅、镉、砷、汞、锑、铬、镍、钡、锶等禁限用元素含量

建立了化妆品中铅(Pb)、镉(Cd)、砷(As)、汞(Hg)、锑(Sb)、铬(Cr)、镍(Ni)、钡(Ba)、锶(Sr)含量的电感耦合等离子体原子发射光谱法(ICP-AES)同步检测技术。采用微波消解,在较难消化的化妆品中加HF进行消化,铑(Rh)为内标元素消除基体干扰,以配备耐HF进样系统的ICP-AES进行测定。在0～1.0 mg/L范围内呈现良好的线性关系(相关系数≥0.9999),Pb、Cd、As、Hg、Sb、Cr、Ni、Ba、Sr检出限分别为0.0016,0.0007,0.0021,0.0013,0.0003,0.0009,0.0008,0.0009,0.0021 mg/L,方法回收率80.2%～111%,精密度1.7%～8.2%。结果表明,该方法适用于检测基体复杂的化妆品中Pb、Cd、As、Hg、Sb、Cr、Ni、Ba、Sr。     

电感耦合等离子体质谱（ICP-MS）法测定沙虫中10种重金属

建立了密闭高压消解-电感耦合等离子体质谱快速测定了沙虫中10种重金属元素(Pb、Tl、Cd、As、Cr、Ni、V、Cu、Sn、Sb)的方法,并分析了重金属的分布特征。试样经粉碎后,以HNO3和H2O2为消解剂进行消解处理,得到的消解液使用电感耦合等离子体质谱仪测定各元素的含量。结果表明,10种重金属元素元素的方法检出限在0.05～3.4μg/kg之间,相对标准偏差（RSD,n=3）小于4%,在0.05-100μg/L线性范围内线性关系良好,相关系数均大于0.999,方法用于国家有证标准物质（GBW10050）的测定,结果与标示值相符。方法灵敏度高,重现性好,定量准确,适用于沙虫样品的检测。     

电感耦合等离子体质谱(ICP-MS)法测定沙虫中10种重金属元素

建立了高压密闭消解-电感耦合等离子体质谱法快速测定沙虫中10种重金属元素(Pb、Tl、Cd、As、Cr、Ni、V、Cu、Sn、Sb)的方法,并分析了重金属的分布特征。试样经粉碎后,以HNO3和H2O2为消解剂进行消解处理,得到的消解液使用电感耦合等离子体质谱仪测定各元素的含量。结果表明,10种重金属元素的方法检出限在0.05～2.5μg/kg,相对标准偏差(RSD,n=3)小于4%,在0.05～100μg/L范围内线性关系良好,相关系数均大于0.999,方法用于国家有证标准物质(GBW10050)的测定,结果与标示值相符。方法灵敏度高,重现性好,定量准确,适用于沙虫样品的检测。     

电感耦合等离子体质谱法(ICP-MS)同时测定正山小种红茶中18种微量元素

采用微波消解样品,应用电感耦合等离子体质谱法(ICP-MS)同时测定正山小种红茶中Na、Mg、K、Ca、Fe、Al、Zn、Mn、Cu、Ge、Cd、Cr、Ni、Se、Mo、Hg、As和Pb 18种元素。对于所测元素校准曲线的相关系数0.9990,回收率范围为90.1%～108.1%,相对标准偏差为1.54%～7.57%。正山小种红茶中Na、Mg、K、Ca、Fe、Al、Zn、Mn、Cu、Ge、Cd、Cr、Ni、Se、Mo、Hg、As和Pb 18种元素可用ICP-MS法同时测定,方法简便、快速、准确,灵敏度高。     

磁性纳米四氧化三铁选择性富集-电感耦合等离子体原子发射光谱测定砷

基于磁性纳米Fe3O4对砷的选择性富集作用,建立了电感耦合等离子体原子发射光谱(ICP-OES)测定水溶液中砷的方法.考察了溶液酸度、吸附时间、吸附剂用量、试液体积和共存离子等因素对不同形态砷分离富集效率的影响.结果表明,在pH 2～10范围内,选用6.0 mg纳米Fe3O4定量富集,振荡2 min后,三价砷、五价砷、一甲基砷以及二甲基砷等均可被磁性纳米Fe3O4定量富集.线性范围为0.063～20 mg/L; 检出限(3σ)为0.0189 mg/L; 对砷标准溶液测定的相对标准偏差为1.27%(n=6).用本方法对自来水中加入的砷标准溶液进行了测定,回收率为100.3%～104.8%.本方法简便快速,可用于复杂基体中低含量砷的富集分离和测定.     

ICP-MS混合模式测定植物性农产品中的9种痕量元素

建立了ICP- MS混合模式测定蔬菜、水果、大米等植物性农产品中痕量元素的检测方法.样品经HNO3 + H2O2消解,以74Ge,115In、209Bi作为内标溶液消除基体干扰,动能歧视型碰撞/反应池技术消除质谱干扰的方式测定植物性农产品中As,Hg,Pb,Cd,Cr,Se,Cu,Ni,Zn 9种痕量元素.结果表明:该...     

活性炭微柱在线流动注射预富集-火焰原子吸收快速顺序测定铜、钴、镍、镉、铅的研究

采用双柱富集的流动注射在线预富集系统与220FS顺序多元素原子吸收分光光度计联用，使用圆锥型活性炭微柱为预富集柱，在pH4～5．5范围内，以吡咯啶二硫代氨基甲酸铵(APDC)为络合剂，6mol／L HNO3为洗脱剂，实现了Cu、Co、Ni、Cd、Pb5种元素的快速顺序测定。该体系对以上5种元素的富集倍数为9．8～15．5之间，34s富集的检出限(3σ)Cu为1．81，Co为3．10，Ni为1．66，Cd为0．28，Pb为4．90μg/L；相对标准偏差Cu 1．13％；Co1．24％；Ni2．26％；Cd0．95％；Pb1．77％。     

Selectivity assessment of a sequential extraction procedure for metal mobility characterization using model phases

This study considers the selectivity of the extractants used in a sequential extraction scheme for metals mobility assessment by analyzing individual mineral phases previously coprecipitated or sorbed with trace metals. The scheme evaluated was a modification of the Tessier et al. [A. Tessier, P.G.C. Campbell, M. Bisson, Anal. Chem. 51 (1979) 844] sequential procedure proposed by the authors. The phases studied were calcite, amorphous iron oxide, hausmannite, humic acid, kaolinite and illite. Selective extractions were obtained for As, Cr, Cu, Ni, Pb and Zn in metal-coprecipitated phases whereas NH(2)OH-HCl was not selective for the extraction of Hg and Cd coprecipitated in hausmannite and amorphous iron oxide, respectively. Otherwise, Cd, Hg, Ni and Zn sorbed on the different phases were released with MgCl(2) and NaOAc/HOAc, but stronger reagents were needed to release As, Cr, Cu and Pb.     

The determination of trace metals in mineral waters : Part I. Atomic Absorption Spectrometric Determination of Cd,Co, Cr,Cu, Ni and Pb by Electrothermal Atomization After Concentration by Co-precipitation

Procedures based on flameless atomic absorption spectrometry are described for the determination of Cd, Co, Cr, Cu, Ni and Pb in mineral waters. Because of matrix effects and the inadequate detection limits for direct determinations, the metals are separated from the macrocomponents by precipitation of their tetramethylenedithiocarbamates with iron(III) as collector, or by co-precipitation on Fe(OH)₃. The detection limits are 0.005, 0.3, 0.08. 0.10, 2 and 0.10 μg l^- for Cd, Co, Cr, Cu, Ni and Pb, respectively, and are satisfactory for the determination of these elements in mineral waters. The precision is 2–7%.     

黔产市售绿茶重金属的含量特征及健康风险评估

为研究黔产市售绿茶中重金属的含量分布特征及健康风险,以五个生产加工地的黔产市售绿茶为研究对象,分析其9种重金属(Pb、Cr、Cd、Hg、Cu、Zn、Mn、Ni和As)含量,利用美国环境保护署(USEPA)推荐的健康风险评价模型进行人体重金属的健康风险评价。结果表明,五种茶叶中Cr、Cd、Pb、Hg、Cu和As含量均低于国家限量标准。黔产市售绿茶的重金属浸出率大小次序为Zn>Mn>Hg>As>Cd>Pb>Cr>Cu>Ni。健康风险评价结果表明,五个产地的绿茶中重金属通过饮茶途径所产生的健康危害个人年风险大小次序为Cd>As>Mn>Ni>Cr>Hg>Pb>Zn>Cu,茶叶中重金属通过饮茶途径所产生的个人健康危害年风险总和为4.33×10-6~5.73×10-6 a-1,均低于USEPA和ICRP推荐的最大可接受风险水平,表明重金属引起的健康危害极小,其对暴露人群造成的健康危害可忽略不计,绿茶中重金属均处于安全范围内。     

Certification of the contents of some heavy metals (Cd, Cu, Hg, Ni, Pb and Zn) in three types of soils

Summary The element contents of Cd, Cu, Hg, Ni, Pb and Zn of three types of soil were certified. The preparation, homogeneity and stability are reported. The certified contents as well as values for Co, Cr, Mn and Se and for the aqua regia soluble contents Cd, Cr, Cu, Mn, Ni, Pb and Zn are given.

---

Zertifizierung von Schwermetallspuren (Cd, Cu, Hg, Ni, Pb und Zn) in drei Bodenproben

Zusammenfassung In drei verschiedenen Bodenproben wurden die Elementgehalte an Cd, Cu, Hg, Ni, Pb und Zn zertifiziert. Es wird berichtet über die Bereitung, Homogenität und Stabilität. Die zertifizierten Gehalte sowie der Gehalt an Cr, Co, Mn und Se und der Gehalt an königswasserlöslichem Cd, Cr, Cu, Mn, Ni, Pb und Zn werden angegeben.

     

Certification of the contents of some heavy metals (Cd, Co, Cu, Mn, Hg, Ni, Pb and Zn) in three types of sewage sludge

Summary The element contents of Cd, Co, Cu, Mn, Hg, Ni, Pb and Zn of three different types of sewage sludge were certified. The preparation, the homogeneity and the stability are reported. The certified contents as well as values for Cr and Se and for the aqua regia soluble contents of Cd, Cr, Co, Cu, Mn, Ni, Pb and Zn are given.

---

Zertifizierung von Schwermetallspuren (Cd, Co, Cu, Mn, Hg, Ni, Pb und Zn) in drei Klärschlammproben

Zusammenfassung In drei verschiedenen Klärschlammproben wurden die Elementgehalte an Cd, Co, Cu, Mn, Hg, Ni, Pb und Zn zertifiziert. Es wird berichtet über die Herstellung, Homogenität und Stabilität. Die zertifizierten Gehalte sowie der Gehalt von Cr, Se und der Gehalt an königswasserlöslichem Cd, Cr, Co, Cu, Mn, Ni, Pb und Zn werden angegeben.

     

Concentration Levels of Trace Elements in Carrots,Onions, and Potatoes Cultivated in Asopos Region,Central Greece

The objective of the work was to investigate the correlation between the environmental pollution of Asopos river area in Viotia, Greece and the concentration of Ni, Cr, Cd, Pb, Cu, and As in specific crops (carrots, onions, and potatoes) produced in this region. Samples of these crops from Asopos and other Greek areas (control) were collected. For method accuracy, the Certified Reference Material, CRM 281 (trace elements in rye grass) was measured. Simultaneous multi-element graphite furnace atomic absorption spectrometry was used after a microwave acid digestion. The levels of Ni in Asopos food were found up to 9 times higher than control (e.g., Asopos potatoes had an average Ni content of 800 µg/kg compared to 78 µg/kg in control, whereas Asopos carrots had an average Ni content of 474 µg/kg compared to 93 µg/kg in control). Likewise, the levels of Cr were found to be about 2 times higher than control (e.g., Asopos carrots were found to have an average Cr content of 43 µg/kg compared to 20 µg/kg in control). The levels of Cd and Pb had a high variance in the Asopos sourced food. Arsenic was not detected in any sample. Our results indicate that the mean intake of trace elements (Ni, Cr, Pb, Cd, and Cu) by adults through consumption of crops from Asopos, for an average consumption pattern, generally is well below the Allowable Daily Intakes (ADIs). Comparison was also made with data from literature from Greece.     

Removal of metal ions from aqueous solution by adsorption on the natural adsorbent CACMM2.

The adsorption of Cd2+, Cr3+, Cu2+, Fe3+, Ni2+, Pb2+ and Zn2+ from aqueous solution was used to study the sorption properties of the adsorbent CACMM2 extracted from a cactus. Quantitation of the cation concentrations was performed by HPLC with diode array detection using on-column complex formation with 8-hydroxyquinoline. Removal degree from 100 mg M(n+) l(-1) solutions followed the series: Cu>Cd>Fe>Ni>Cr>Zn. Henry and Freundlich constants were determined since adsorption did not reach saturation plateaux in the studied concentration interval. Sorption of chromium by CACMM2 was stronger than the sorption onto lignin, calcium oxalate and cellulose up to 1,000 mg Cr3+ l(-1). Copper and iron were desorbed to a greater extent, while lead adsorption was practically irreversible. CACMM2 was able to remove more than 83% of chromate in a freshly prepared and exhausted chromate commercial solution.     

Determination of heavy metal traces in metallic materials with IDMS

Summary Two pure copper samples were analysed for Cr, Ni, Zn, Cd, and Pb with isotope dilution mass spectrometry (IDMS) as a part of a certification campaign of the European Community Bureau of Reference in Brussels. Additionally, one commercially available copper powder was determined for Zn, Cd, and Pb. After dissolution of the sample in aqua regia Pb was separated from the matrix by anodic electrodeposition, the other elements by anion-exchange chromatography. Positive thermal ions were produced in a single-filament ion source using the silica gel technique with phosphoric acid for Zn, Cd, and Pb and with boric acid for Cr and Ni. Most of the heavy metals could be determined with relative standard deviations of about 1% down to the ng/g level. The detection limits were 13 ng/g for Zn, 4 ng/g for Ni, 2 ng/g for Cr, 1 ng/g for Pb, and 0.03 ng/g for Cd. The results were compared with those obtained by another IDMS laboratory and by other methods applied during the certification campaign.

---

Bestimmung von Schwermetallspuren in metallischen Werkstoffen mit der massenspektrometrischen IsotopenverdünnungsanalyseTeil 1. Bestimmung von Cr, Ni, Zn, Cd und Pb in reinem Kupfer

     

Evaluation of vermicompost as bioadsorbent substrate of Pb,Ni, V and Cr for waste waters remediation using Total Reflection X-ray Fluorescence

The use of vermicompost as adsorbent substrate for removing Pb, Ni, V and Cr from waste waters is proposed. In this work, after a preliminary physical and chemical characterization of the vermicompost, the optimal parameters for the heavy metal adsorption were obtained. A synthetic multielemental solution of Pb, Cr and Ni and a solution of NH₄VO₃ for vanadium were evaluated. The optimized parameters were pH, vermicompost mass to volume ratio, agitation time and particle size of the adsorbent. A batch system was employed for the assays. The elements were determined in the supernatant solution after filtration of the substrate. An optimal pH of 4.5 was found for ion removal. The agitation time slightly influences the adsorption of Pb and Cr, but it has a high influence on the Ni and V adsorption. The highest adsorption and removal of the metals was observed for a vermicompost mass of 2 g per 500 mL using a particle size between 75 to 841 µm for Pb, Cr and Ni, and 841 till 1192 µm for V. The mean removal percentage for each element is around 95% for Pb. Ni and Cr in the multielemental synthetic sample, demonstrating a high removal capacity of the substrate. For V it was found a removal efficiency of 50%.