Hydrothermal Synthesis of a rGO Nanosheet Enwrapped NiFe Nanoalloy for Superior Electrocatalytic Oxygen Evolution Reactions

Graphene‐based hybrid nanostructures possess many advantages in the field of electrochemical energy applications. In this work, a facile and efficient hydrothermal approach has been developed for the preparation of NiFe alloy nanoparticles/rGO hybrid nanostructures, in which the nanoparticles are well combined with rGO nanosheets and the size of the nanoparticles is about 100 nm. Moreover, the electrochemical oxygen evolution reaction (OER) tests confirmed that the obtained NiFe/rGO hybrid nanostructures possess notably higher activity than both the rGO‐free NiFe nanoparticles and pure Ni/rGO hybrids, and the optimal NiFe ratio is 2:1. The OER overpotential at 20 mA cm^?1?2 with Ni₂Fe/rGO is as low as 0.285 V, which is 96 mV lower than that of pure Ni/rGO hybrids. Meanwhile, the Ni₂Fe/rGO catalyst has excellent stability. Therefore, this work contributes a facile and efficient method to prepare a NiFe alloy nanoparticles/rGO hybrid structure for potential applications in the field of electrochemical energy devices, such as electrochemical water splitting cells, rechargeable metal/air batteries, etc.     

Facile Synthesis of Pd‐Ni Nanoparticles on Reduced Graphene Oxide under Microwave Irradiation for Formic Acid Oxidation

Pd and Pd_x Ni nanoparticles have been supported on reduced graphene oxide (Pd/rGO and Pd_x Ni/rGO ) by using the microwave‐assisted heating method in glycol. The morphology, composition and electrochemical performance have been characterized by TEM , XRD , XPS and electrochemical methods. The XRD and XPS results show that there are no PdNi alloy particles formed in Pd_x Ni/rGO and the composites exist mostly in the form of Pd⁰ and NiOOH species. The electrochemical results reveal that Pd_x Ni/rGO synthesized from the feeding source of Pd and Ni with an atomic ratio of 4∶1 exhibits higher activity, better stability and smaller electron transfer resistance toward formic acid electro‐oxidation compared with commercial Pd/C, Pd/rGO and other Pd_x Ni/rGO samples. The excellent electrocatalytic performance indicates that the addition of appropriate amount of Ni can greatly enhance the activity and stability of Pd catalysts for formic acid oxidation.     

Electro-oxidation of formic acid catalyzed by FePt nanoparticles

The electrocatalytic oxidation of formic acid at a gold electrode functionalized with FePt nanoparticles was studied by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) in a mixed solution of 0.1 M HCOOH and 0.1 M HClO4. The FePt bimetallic nanoparticles, with a mean diameter of 3 nm, were prepared by a chemical reduction method. The Au/FePt nanostructured electrode was prepared firstly by the deposition of FePt nanoparticles onto a clean Au electrode surface, followed by ultraviolet ozone treatment to remove the organic coating. In CV measurements, two well-defined anodic peaks were observed at +0.20 and +0.51 V (vs. a Ag/AgCl quasi-reference). The anodic peak at +0.20 V was attributed to the oxidation of HCOOH to CO2 on surface unblocked by CO, whereas the peak at +0.51 V was ascribed to the oxidation of surface-adsorbed CO (an intermediate product of HCOOH oxidation) and further oxidation of bulk HCOOH. From the onset potential and current density of the electro-oxidation of HCOOH, FePt nanoparticles exhibit excellent electrocatalytic activities as compared to Pt and other metal alloys. EIS measurements were carried out to further examine the reaction kinetics involved in the HCOOH electro-oxidation. The EIS responses were found to be strongly dependent on electrode potentials. At potentials more positive than -0.25 V (vs. Ag/AgCl), pseudo-inductive behavior was typically observed. At potentials between +0.3 and +0.5 V, the impedance response was found to reverse from the first quadrant to the second quadrant; such negative Faradaic impedance was indicative of the presence of an inductive component due to the oxidation of surface-adsorbed CO. The impedance responses returned to normal behavior at more positive potentials (+0.6 to +0.9 V). The mechanistic variation was attributed to the formation of different intermediates (CO or oxygen containing species) on the electrode surface in different potential regions. Two equivalent circuits were proposed to model these impedance behaviors.     

Electrochemical co-deposition of reduced graphene oxide-gold nanocomposite on an ITO substrate and its application in the detection of dopamine

The simultaneous deposition of rGO and gold nano structures has been achieved by electrodeposition from mixed solutions containing graphene oxide(GO)and a gold precursor.Scanning electron microscope(SEM),Raman spectroscopy and atomic force microscopy(AFM)have been employed to reveal the morphology,uniformity and practical stability of the nanocomposite films on the indium tin oxide(ITO)substrate.The AFM data showed heights of tens of nanometers of the nanocomposite,suggesting that multilayers of rGO with gold nanoparticles had been formed as a result of the electrochemical co-deposition.Differential pulse voltammetry(DPV),as a widely used analytical technique,has been carried out on the rGO-Au/ITO electrode for the quantitative detection of dopamine(DA).The detection limit(S/N=3)for the determination of DA was evaluated as 0.6μM.     

Functionalization of Reduced Graphene Oxide with β‐cyclodextrin Modified Palladium Nanoparticles for the Detection of Hydrazine in Environmental Water Samples

A sensitive and selective hydrazine sensor was developed by β‐cyclodextrin modified palladium nanoparticles decorated reduced graphene oxide (PdNPs‐β‐CD/rGO) nanocomposite. The PdNPs‐β‐CD/rGO hybrid material was prepared by simple electrochemical method. The hydrophobic cavity of β‐CD ineracts with palladium nanoparticles by hydrophobic interaction and further it is uniformly assembled on the rGO surface through hydrogen bond formation, which is clearly confirmed by FT‐IR, FESEM and TEM. The high electrocatalytic activity of hydrazine oxidation was observed at −0.05 V (vs. Ag/AgCl) on PdNPs‐β‐CD/rGO modified electrode; due to the excellent stabilization, high catalytic activity and large surface area of the PdNPs‐β‐CD/rGO composite. The PdNPs‐β‐CD/rGO fabricated hydrazine sensor exhibited an excellent analytical performance, including high sensitivity (1.95 μA μM⁻¹ cm⁻²), lower detection limit (28 nM) and a wide linear range (0.05 to 1600 μM). We also demonstrated that the PdNPs‐β‐CD/rGO nanocomposite modified electrode is a highly selective and sensitive sensor towards detection of hydrazine among the various interfering species. Hence, the proposed hydrazine sensor is able to determine hydrazine in different water samples.     

Electrochemical and FTIR spectroscopic study of CO2 reduction at a nanostructured Cu/reduced graphene oxide thin film

Here we report a facile approach to synthesize a novel nanostructured thin film comprising Cu nanoparticles (NPs) and reduced graphene oxide (rGO) on a glassy carbon electrode (GCE) via the direct electrochemical reduction of a mixture of cupper and graphene oxide (GO) precursors. The effect of the applied potential on the electrochemical reduction of CO₂ was investigated using linear sweep voltammetric (LSV) and chronoamperometric (CA) techniques. Carbon monoxide and formate were found as the main products based on our GC and HPLC analysis. The electrochemical reduction of CO₂ at the Cu/rGO thin film was further studied using in situ ATR-FTIR spectroscopy to identify the liquid product formed at different applied cathodic potentials. Our experimental measurements have shown that the nanostructured Cu/rGO thin film exhibits an excellent stability and superb catalytic activity for the electrochemical reduction of CO₂ in an aqueous solution with a high current efficiency of 69.4% at − 0.6 V vs. RHE, promising for the efficient electrochemical conversion of CO₂ to valuable products.     

Fabrication of Non‐enzymatic Electrochemical Glucose Sensor Based on Pd−Mn Alloy Nanoparticles Supported on Reduced Graphene Oxide

Mixed metals alloy nanoparticles supported on carbon nanomaterial are the most attractive candidates for the fabrication of non‐enzymatic electrochemical sensor with enhanced electrochemical performance. In this study, palladium‐manganese alloy nanoparticles supported on reduced graphene oxide (Pd?Mn/rGO) are prepared by a simple reduction protocol. Further, a novel enzyme‐free glucose sensing platform is established based on Pd?Mn/rGO. The successful fabrication of Pd?Mn alloy nanoparticles and their attachment at rGO are thoroughly characterized by various microscopic and spectroscopic techniques such as XRD, Raman, TEM and XPS. The electrochemical activity and sensing features of designed material towards glucose detection are explored by amperometric measurments in 0.1 M NaOH at the working voltage of ?0.1 V. Thanks to the newly designed Pd?Mn/rGO nanohybrid for their superior electrorochemical activity towards glucose comprising the admirable sensing features in terms of targeted selectivity, senstivity, two linear parts and good stability. The enhanced electrochemical efficacy of Pd?Mn/rGO electrocatalyst may be credited to the abundant elecrocatalytic active sites formed during the Pd?Mn alloying and the electron transport ability of rGO that augment the electron shuttling phenomenon between the electrode material and targeted analyte.     

Self-assembled oligo(phenylene ethynylene)s/graphene nanocomposite with improved electrochemical performances for dopamine determination

In this work, a novel 1,4-bis (4- aminophenylethynyl)benzene (OPE-NH₂, a symmetric linear conjugated oligo(phenylene ethynylene)s derive) and chemically-reduced graphene oxide (rGO) nanocomposite (OPE-NH₂/rGO) was synthesized by a simple self-assembly method. The OPE-NH₂/rGO nanocomposite was stable and water soluble. The formation of OPE-NH₂/rGO nanocomposite was ascribed to the π–π stacking interaction between the conjugated structure of OPE-NH₂ and rGO as well as the electrostatic force between the amino group of OPE-NH₂ and the carboxyl group on rGO, which was characterized by FT-IR, UV–vis spectra and fluorescence spectra. The OPE-NH₂/rGO nanocomposite exhibited significantly improved electrocatalytic activity to the oxidization of dopamine (DA) than that of rGO or OPE-NH₂. The electrochemical performances of OPE-NH₂/rGO were dependent on the OPE-NH₂ contents, and OPE-NH₂ content of 5 wt% exhibited the highest activity. Compared with that of rGO, the nanocomposite presented superior high sensitivity with detection limit of 5 nM, excellent selectivity, wide linear range (0.01–60 μM) and good stability on the determination of DA. The practical application of the developed OPE-NH₂/rGO nanocomposite modified electrode was successfully demonstrated for DA determination in human serum samples.     

Synthesis of Silver Nanoparticle‐Graphene Composites for Electroanalysis Applications using Chemical and Electrochemical Methods

An electrochemical device was developed for the simultaneous determination of sulfamethoxazole (SMX) and trimethoprim (TMP) using differential pulse voltammetry and glassy carbon (GC) electrodes modified with reduced graphene oxide (rGO) and silver nanoparticle (AgNP) composites, synthesised using both chemical and electrochemical methods. The morphology and electrochemical behaviour of the GC electrodes modified with the rGO/AgNP (chemical method) and rGO‐AgNP (electrochemical method) composites were characterised by scanning electron microscopy and cyclic voltammetry. These techniques demonstrated that, in both methods, the graphene oxide was modified by the AgNPs, and the composite synthesised by the electrochemical method showed a better dispersion of the nanoparticles, resulting in an increase in the surface area compared to the rGO/AgNP composite. The GC/rGO‐AgNP electrode was evaluated and optimised for the simultaneous determination of SMX and TMP, achieving detection limits of 0.6 μmol L⁻¹ for the SMX and 0.4 μmol L⁻¹ for the TMP. The proposed GC/rGO‐AgNP electrochemical device was successfully applied to the simultaneous determination of SMX and TMP in wastewaters samples.     

水热法制备Fe3O4/rGO纳米复合物作为锂离子电池阳极材料

以氢氧化铁为四氧化三铁的前驱体,氧化石墨烯（GO）为还原石墨烯（rGO）的前驱体,以水合肼和二水合柠檬酸三钠为混合还原剂,采用水热法制备了还原石墨烯负载四氧化三铁纳米颗粒（Fe₃O₄/rGO）的复合材料。通过透射电子显微镜（TEM）、X-射线衍射（XRD）和热重分析（TGA）对产物的形貌、结构和组成进行了表征。以锂片为对电极进行了扣式电池的组装,通过恒电流充放电和循环伏安法对其电化学性能进行了测试。材料具有均一的形貌,rGO具有较高的还原程度且可以在充放电过程中缓冲Fe₃O₄纳米颗粒的体积变化,使得Fe₃O₄/rGO纳米复合物具有较好的电化学性能。     

Water-based ferrofluids from FexPt1-x nanoparticles synthesized in organic media

This paper describes an effective method to transfer oleic acid/oleylamine-capped colloidal FePt nanoparticles dispersed in hexane into water, using tetramethylammonium hydroxide (TMAOH) as a phase transfer agent. FexPt1-x nanoparticles with different compositions (x = 0.32, 0.40, 0.48, 0.60, 0.66, 0.69) in the size range of 2-4 nm were synthesized by a high-temperature organometallic route with oleic acid and oleylamine as stabilizers. The surface of such nanoparticles was modified through removal of the organic, hydrophobic layer and adsorption of TMAOH, which provides the nanoparticles with sufficient surface charge so that an electrostatic double layer builds up, and the FePt nanoparticles can be fully redispersed in aqueous solution, even with high concentrations. The water-dispersible FePt nanoparticles were characterized by transmission electron microscopy, electrophoretic mobility, X-ray diffraction, and Fourier transform infrared spectroscopy.     

Electrochemical sensor for ultrasensitive determination of ceftazidime using hollow platinum nanoparticles/reduced graphene oxide/pencil graphite electrode

In this paper, an electrochemical sensor was prepared based on the modification of pencil graphite electrode (PGE) by hollow platinum nanoparticles/reduced graphene oxide (HPtNPs/rGO/PGE) for determination of ceftazidime (CFZ). Initially, rGO was electrodeposited on the electrode surface, and then, hollow platinum nanoparticles were placed on the electrode surface via galvanic displacement reaction of Pt(IV) ions with cobalt nanoparticles (CoNPs) that had electrodeposited on the electrode surface. Several significant parameters controlling the performance of the HPtNPs/rGO/PGE were examined and optimized using central composite design as one optimization methodology. The surface morphology and elemental characterization of the bare PGE, rGO/PGE, CoNPs/rGO/PGE, and HPtNPs/rGO/PGE-modified electrodes was analyzed by field-emission scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, and electrochemical impedance spectroscopy. The electrochemical activity of CFZ on resulting modified electrode was investigated by cyclic voltammetry (CV) and adsorptive differential pulse voltammetry (AdDPV). Adsorptive differential pulse voltammetry indicates that peak current increases linearly with respect to increment in CFZ concentration. CFZ was determined in the linear dynamic range of 5.0 × 10^?13 to 1.0 × 10^?9 M, and the detection limit was determined as 2.2 × 10^?13 M using AdDPV under optimized conditions. The results showed that modified electrode has high selectivity and very high sensitivity. The method was used to determine of CFZ in drug injection and plasma samples.     

Nanocomposites of Sulfonic Polyaniline Nanoarrays on Graphene Nanosheets with an Improved Supercapacitor Performance

A new nanocomposite, poly(aniline‐co‐diphenylamine‐4‐sulfonic acid)/graphene (PANISP/rGO), was prepared by means of an in situ oxidation copolymerization of aniline (ANI) with diphenylamine‐4‐sulfonic acid (SP) in the presence of graphene oxide, followed by the chemical reduction of graphene oxide using hydrazine hydrate as a reductant. The morphology and structure of PANISP/rGO were characterized by field‐emission (FE) SEM, TEM, X‐ray photoelectron spectroscopy (XPS), Raman, FTIR, and UV/Vis spectra. The electrochemical performance was evaluated by cyclic voltammetry, galvanostatic charge–discharge, and electrochemical impedance spectroscopy. The PANISP/rGO nanocomposite showed a nanosized structure, with sulfonic polyaniline nanoarrays coated homogeneously on the surface of graphene nanosheets. This special structure of the nanocomposite also facilitates the enhancement of the electrochemical performance of the electrodes. The PANISP/rGO nanocomposite exhibits a specific supercapacitance up to 1170 F g^?1 at the current density of 0.5 A g^?1. The as‐prepared electrodes show excellent supercapacitive performance because of the synergistic effects between graphene and the sulfonic polyaniline copolymer chains.     

Synthesis of cobalt-doped ZnO/rGO nanoparticles with visible-light photocatalytic activity through a cobalt-induced electrochemical method

ZnO is a semiconductor photocatalyst widely applied in photodegradation of organic pollutants and in photoelectric conversion. ZnO exhibits low photocatalytic activity due to poor absorption in the visible region. In this work, a novel cobalt-induced electrochemical growth method was developed to synthesize cobalt-doped ZnO/rGO nanoparticles in an aqueous solution at room temperature. Cobalt-doped ZnO/rGO nanoparticles exhibited wider visible-light absorption band ranging from 400 nm to 700 nm due to cobalt doping. The surface structure of ZnO formed by the cobalt-induced electrochemical method without other ions is suitable for photocatalytic reactions. The cobalt-doped ZnO/rGO nanoparticles were found to exhibit in photodegradation and photo-electrochemical measurements and exhibited enhanced photocatalytic activity under visible-light irradiation.     

Understanding mercapto ligand exchange on the surface of FePt nanoparticles

Tailoring the surface of nanoparticles is essential for biological applications of magnetic nanoparticles. FePt nanoparticles are interesting candidates owing to their high magnetic moment. Established procedures to make FePt nanoparticles use oleic acid and oleylamine as the surfactants, which make them dispersed in nonpolar solvents such as hexane. As a model study to demonstrate the modification of the surface chemistry, stable aqueous dispersions of FePt nanoparticles were synthesized after ligand exchange with mercaptoalkanoic acids. This report focuses on understanding the surface chemistry of FePt upon ligand exchange with mercapto compounds by conducting X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) studies. It was found that the mercapto end displaces oleylamine on the Pt atoms and the carboxylic acid end displaces the oleic acid on the Fe atoms, thus exposing carboxylate and thiolate groups on the surface that provide the necessary electrostatic repulsion to form stable aqueous dispersions of FePt nanoparticles.     

Electrocatalytical Application of Platinum Nanoparticles Supported on Reduced Graphene Oxide in PEM Fuel Cell: Effect of Reducing Agents of Dimethlyformamide or Hydrazine Hydrate on the Properties

Two kinds of reduced graphene oxide (rGO) were synthesized with the reducing agents of either dimethylformamide (DMF) or hydrazine hydrate (HYD). The decoration of platinum nanoparticles (Pt NPs) over these materials was provided by microwave irradiation (MWI) method. Detailed physical and electrochemical measurements were carried out. Based on the electrochemical results of both catalysts, it is not surprising the achievement of higher electrochemical active surface area (ECSA), higher oxygen reduction reaction (ORR) activity, higher electron transfer number, lower charge transfer resistance and higher fuel cell performance with the Pt/rGO (DMF) catalyst which surpasses Pt/rGO (HYD) in many ways.     

Silica encapsulation and magnetic properties of FePt nanoparticles

Core-shell nanoparticles have emerged as an important class of functional nanostructures with potential applications in many diverse fields, especially in health sciences. We have used a modified aqueous sol-gel route for the synthesis of size-selective FePt@SiO2 core-shell nanoparticles. In this approach, oleic acid and olyel amine stabilized FePt nanoparticles are first encapsulated through an aminopropoxysilane (APS) monolayer and then subsequent condensation of triethoxysilane (TEOS) on FePt particle surface. These well-defined FePt@SiO2 core-shell nanoparticles with narrow size distribution become colloidal in aqueous media, and can thus be used as carrier fluid for biomolecular complexes. In comparison, the scarce hydrophilic nature of oleic acid monolayers on FePt particle surface yields an edgy partial coating of silica when only TEOS is applied for the surface modification. The synthesized core-shell nanoparticles were characterized by direct techniques of high resolution transmission electron microscopy (HRTEM), EDS and indirectly via UV-vis absorption and FTIR studies. The FePt@SiO2 nanoparticles exhibit essential characteristics of superparamagnetic behavior, as investigated by SQUID magnetometry. The blocking temperatures (T(B)) of FePt and FePt@SiO2 (135 and 80 K) were studied using zero field cooled (ZFC)/field cooled (FC) curves.     

镍钴双金属-卟啉有机框架复合纳米材料构建的无酶传感器检测多巴胺

以Ni、Co为金属节点,5,10,15,20-四（4-羧基苯基）卟啉（TCPP）为金属配体,合成了金属有机框架材料（MOFs）作催化材料,以还原氧化石墨烯（rGO）和乙炔黑（ACET）作信号放大材料,制备出一种灵敏度高、稳定性高、选择性好的无酶电化学传感器,用于检测多巴胺（DA）。通过一步水热法制成rGO-NiCoTCPP,再用滴涂法将其修饰在玻碳电极上,即得GCE/rGO-NiCoTCPP电极,最后将ACET滴涂在此电极上,得到GCE/rGO-NiCoTCPP/ACET电极。利用红外光谱、扫描电子显微镜和电化学阻抗对此电极进行了表征,并将不同修饰电极放在磷酸缓冲液中进行循环伏安表征。GCE/rGO-NiCoTCPP/ACET传感器对DA具有较宽线性范围（0.4 ~160 μmol/L）及较高的电流响应（检出限为0.198 μmol/L）,有望应用于实际样品中DA的检测。     

Design and Development of Ultrafast Sinapic Acid Sensor Based on Electrochemically Nanotuned Gold Nanoparticles and Solvothermally Reduced Graphene Oxide

We report for the first time sinapic acid (SA) sensing based on nanocomposite comprising electrochemically tuned gold nanoparticles (EAuNPs) and solvothermally reduced graphene oxide (rGO). The synthesized EAuNPs, rGO, and EAuNPs‐rGO nanocomposite were characterized using X‐ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), particle size analysis, and Raman spectroscopy. A proof‐of‐concept electrochemical sensor for SA was developed based on synthesized EAuNPs‐rGO nanocomposite, which was characterized by electrochemical techniques such as cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The developed sensor detected SA with a linear dynamic range (LDR) between 20 μM and 200 μM and detection limit (DL) of 33.43 (±0.21) nM (RSD<3.32 %). To show the useful purpose of the sensor probe in clinical applications, SA was detected in human urine samples, which showed the percentage recovery between 82.6 % and 92.8 %. Interferences due to various molecules such as L‐cystine, glycine, alanine, serum albumin, uric acid, citric acid, ascorbic acid, and urea were tested. Long‐term stability of the sensor probe was examined, which was found to be stable up to 6 weeks. The sensor fabricated using EAuNPs‐rGO nanocomposite has many attractive features such as; simplicity, rapidity, and label‐free detection; hence, it could be a method of choice for SA detection in various matrices.     

Synthesis,characterizations, and electrochemical studies of ZnO/reduced graphene oxide nanohybrids for supercapacitor application

Herein the present article reports the fabrication of ZnO/reduced graphene oxide (ZnG) nanohybrid following a reduction-based process using a non-hazardous material, i.e., ascorbic acid. The morphology, structure, and bonding in the nanohybrid were analyzed using different techniques. Atomic force microscopy and scanning electron microscopy images show spherical particles of ZnO distributed over reduced graphene oxide (rGO). The X-ray diffraction analysis gives calculated values of crystallite size for ZnO as 15.62 nm. The successful incorporation of ZnO nanoparticles into rGO was confirmed using energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy analyses. The electrochemical studies were performed using an electrolyte (0.5 M H₂SO₄). The calculated value of specific capacitance for the nanohybrid was 345 Fg^-1, which was found to be almost double as compared to that of rGO, which is having a value of only 190.5 Fg^-1 at the same scan rate. The nanohybrid also showed excellent capacitance retention after 1,000 cycles.