Water-based ferrofluids from FexPt1-x nanoparticles synthesized in organic media

This paper describes an effective method to transfer oleic acid/oleylamine-capped colloidal FePt nanoparticles dispersed in hexane into water, using tetramethylammonium hydroxide (TMAOH) as a phase transfer agent. FexPt1-x nanoparticles with different compositions (x = 0.32, 0.40, 0.48, 0.60, 0.66, 0.69) in the size range of 2-4 nm were synthesized by a high-temperature organometallic route with oleic acid and oleylamine as stabilizers. The surface of such nanoparticles was modified through removal of the organic, hydrophobic layer and adsorption of TMAOH, which provides the nanoparticles with sufficient surface charge so that an electrostatic double layer builds up, and the FePt nanoparticles can be fully redispersed in aqueous solution, even with high concentrations. The water-dispersible FePt nanoparticles were characterized by transmission electron microscopy, electrophoretic mobility, X-ray diffraction, and Fourier transform infrared spectroscopy.     

Formation of FePt nanoparticles having high coercivity

Ultrasonication of toluene solutions of the heteropolynuclear cluster complex, Pt3Fe3(CO)15, in the presence of oleic acid and oleylamine affords surface-capped fcc FePt nanoparticles having an average diameter of ca. 2 nm. Self-assembled arrays of these nanoparticles on oxidized Si wafers undergo a fcc-to-fct phase transition at 775 degrees C to form ferromagnetic FePt nanocrystals ca. 5.8 nm in diameter well dispersed on the Si wafer surface. Room-temperature coercivity measurements of these annealed FePt nanoparticles confirm a high coercivity of ca. 22.3 kOe. Such high coercivity for fct FePt nanoparticles might result from use of a heterpolynuclear complex as a single-source precursor of Fe and Pt neutral atoms or from use of ultrasonication to form fcc FePt nanoparticles under conditions of exceptionally rapid heating. Experiments to determine the critical experimental conditions required to achieve such high room-temperature coercivities in ferromagnetic nanoparticles are underway.     

Surface modification of magnetic nanoparticles capped by oleic acids: characterization and colloidal stability in polar solvents

The lyophobic surface of monodisperse magnetic nanoparticles capped by oleic acid was made to be more lyophilic by ozonolysis to increase the stability of the suspension in polar solvents like ethanol. The ozone oxidatively cleaved the double bond of oleic acid to form carbonyl and carboxyl groups on the surface of the nanoparticles. Additionally, interfacial ligand exchange of the capping molecules was applied to make the hydrophobic particle surface more hydrophilic. The magnetic particles showed enhanced miscibility and short-term stability in water after interfacial ligand exchange. The structure changes of the capping molecules on the nanoparticle surfaces were investigated using Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS). From these spectroscopy studies, the cleavage of the oleic acid and the formations of the carboxyl and carbonyl groups on the particle surface were confirmed. The shape and the magnetic properties of the nanoparticles were maintained after the surface modification. Ozonolysis is an effective method in modifying the lyophobic surface of the magnetic nanoparticles.     

Silica encapsulation and magnetic properties of FePt nanoparticles

Core-shell nanoparticles have emerged as an important class of functional nanostructures with potential applications in many diverse fields, especially in health sciences. We have used a modified aqueous sol-gel route for the synthesis of size-selective FePt@SiO2 core-shell nanoparticles. In this approach, oleic acid and olyel amine stabilized FePt nanoparticles are first encapsulated through an aminopropoxysilane (APS) monolayer and then subsequent condensation of triethoxysilane (TEOS) on FePt particle surface. These well-defined FePt@SiO2 core-shell nanoparticles with narrow size distribution become colloidal in aqueous media, and can thus be used as carrier fluid for biomolecular complexes. In comparison, the scarce hydrophilic nature of oleic acid monolayers on FePt particle surface yields an edgy partial coating of silica when only TEOS is applied for the surface modification. The synthesized core-shell nanoparticles were characterized by direct techniques of high resolution transmission electron microscopy (HRTEM), EDS and indirectly via UV-vis absorption and FTIR studies. The FePt@SiO2 nanoparticles exhibit essential characteristics of superparamagnetic behavior, as investigated by SQUID magnetometry. The blocking temperatures (T(B)) of FePt and FePt@SiO2 (135 and 80 K) were studied using zero field cooled (ZFC)/field cooled (FC) curves.     

Monodisperse MFe2O4 (M = Fe, Co, Mn) nanoparticles

High-temperature solution phase reaction of iron(III) acetylacetonate, Fe(acac)(3), with 1,2-hexadecanediol in the presence of oleic acid and oleylamine leads to monodisperse magnetite (Fe(3)O(4)) nanoparticles. Similarly, reaction of Fe(acac)(3) and Co(acac)(2) or Mn(acac)(2) with the same diol results in monodisperse CoFe(2)O(4) or MnFe(2)O(4) nanoparticles. Particle diameter can be tuned from 3 to 20 nm by varying reaction conditions or by seed-mediated growth. The as-synthesized iron oxide nanoparticles have a cubic spinel structure as characterized by HRTEM, SAED, and XRD. Further, Fe(3)O(4) can be oxidized to Fe(2)O(3), as evidenced by XRD, NEXAFS spectroscopy, and SQUID magnetometry. The hydrophobic nanoparticles can be transformed into hydrophilic ones by adding bipolar surfactants, and aqueous nanoparticle dispersion is readily made. These iron oxide nanoparticles and their dispersions in various media have great potential in magnetic nanodevice and biomagnetic applications.     

Synthesis of FePt nanocubes and their oriented self-assembly

Monodisperse FePt nanocubes are synthesized at 205 degrees C by controlling decomposition of Fe(CO)5 and reduction of Pt(acac)2 and addition sequence of oleic acid and oleylamine. Different from the assembly of the sphere-like FePt nanoparticles, which shows 3D random structure orientation, self-assembly of the FePt nanocubes leads to a superlattice array with each FePt cube exhibiting (100) texture. Thermal annealing converts the chemically disordered fcc FePt to chemically ordered fct FePt, and the annealed assembly shows a strong (001) texture in the directions both parallel and perpendicular to the substrate. This shape-controlled synthesis and self-assembly offers a promising approach to fabrication of magnetically aligned FePt nanocrystal arrays for high density information storage and high performance permanent magnet applications.     

Surface chemistry of colloidal PbSe nanocrystals

Solution nuclear magnetic resonance spectroscopy (NMR) is used to identify and quantify the organic capping of colloidal PbSe nanocrystals (Q-PbSe). We find that the capping consists primarily of tightly bound oleic acid ligands. Only a minor part of the ligand shell (0-5% with respect to the number of oleic acid ligands) is composed of tri- n-octylphosphine. As a result, tuning of the Q-PbSe size during synthesis is achieved by varying the oleic acid concentration. By combining the NMR results with inductively coupled plasma mass spectrometry, a complete Q-PbSe structural model of semiconductor core and organic ligands is constructed. The nanocrystals are nonstoichiometric, with a surface that is composed of lead atoms. The absence of surface selenium atoms is in accordance with an oleic acid ligand shell. NMR results on a Q-PbSe suspension, stored under ambient conditions, suggest that oxidation leads to the loss of oleic acid ligands and surface Pb atoms, forming dissolved lead oleate.     

Surface-dependent, ligand-mediated photochemical etching of CdSe nanoplatelets

Photochemical etching of CdSe nanoplatelets was studied to establish a relationship between the nanocrystal surface and the photochemical activity of an exciton. Nanoplatelets were synthesized in a mixture of octylamine and oleylamine for the wurtzite (W) lattice or in octadecene containing oleic acid for the zinc-blende (ZB) lattice. For photochemical etching, nanoplatelets were dispersed in chloroform containing oleylamine and tributylphosphine in the absence or presence of oleic acid and then irradiated with light at the band-edge absorption maxima. Etching phenomena were characterized using UV-vis absorption spectroscopy and transmission electron microscopy. The absorption spectra of both W and ZB CdSe nanoplatelets showed that the exciton was confined in one dimension along the thickness. However, the two nanoplatelets presented different etching kinetics and erosion patterns. The rate of etching for W CdSe nanoplatelets was much faster than that for ZB nanoplatelets. Small holes were uniformly perforated on the planar surface of W nanoplatelets, whereas the corners and edges of ZB nanoplatelets were massively eroded without a significant perforation on the planar surface. This suggests that the amine-passivated surface of trivalent cadmium atoms on CdSe nanoplatelets is photochemically active, but the carboxylate-passivated surface of divalent cadmium atoms is not. Hence, the ligand, which induces the growth of W or ZB CdSe nanoplatelets, mediates the surface-dependent photochemical etching. This result implies that an electron-hole pair can be extracted from the planar surface of amine-passivated W nanoplatelets but from the corners and edges of carboxylate-passivated ZB nanoplatelets.     

Conversion of the surface property of oleic acid stabilized silver nanoparticles from hydrophobic to hydrophilic based on host-guest binding interaction

This paper describes a general method to change the surface property of the oleic acid stabilized silver nanoparticles and successful tranferring of the silver nanoparticles from the organic phase into the aqueous phase. By vigorous shaking of a biphasic mixture of the silver organosol protected with oleic acid and p-sulfonated calix[4]arene (pSC4) aqueous solution, it is believed that an inclusion complex is formed between oleic acid molecules and pSC4, and the protective layer of the silver nanoparticles shifts from hydrophobic to hydrophilic in nature, which drives the transfer of silver nanoparticles from the organic phase into the aqueous phase. The efficiency of the phase transfer to the aqueous solution depends on the initial pSC4 concentration. The pSC4-oleic acid inclusion complex stabilized nanoparticles can be stable for long periods of time in aqueous phase under ambient atmospheric conditions. The procedure of phase transfer has been independently verified by UV-vis, transmission electron microscopy, Fourier transform infrared, and 1H nuclear magnetic resonance techniques.     

Magnetic nanoparticle assembly on surfaces using click chemistry

Controlled assembly of ferromagnetic nanoparticles on surfaces is of crucial importance for a range of spintronic and data storage applications. Here, we present a novel method for assembling monolayers of ferromagnetic FePt nanoparticles on silicon oxide substrates using "click chemistry". Reaction of alkyne-functionalized FePt nanoparticles with azide-terminated self-assembled monolayers (SAMs), on silicon oxide, leads to the irreversible attachment of magnetic nanoparticles to the surface via triazole linkers. Based on this covalent interaction, well-packed monolayers of FePt nanoparticles were prepared and nanoparticle patterns are generated on surfaces via microcontact printing (μCP).     

Synthesis and stabilization of monodisperse Fe nanoparticles

Monodisperse Fe nanoparticles are synthesized via a simple one-pot thermal decomposition of Fe(CO)5 in the presence of oleylamine. Controlled oxidation of the iron surface leads to crystalline Fe3O4 shell and results in dramatic increase of chemical and dispersion stability of the nanoparticles. Surface ligand exchange is readily applied to transfer the core/shell nanoparticles from hydrophobic to hydrophilic, and a stable aqueous nanoparticle dispersion in PBS is formed. The functionalized nanoparticles are suitable for biomolecule attachment and biomedical applications.     

Tuning the solubility of TiO2 nanoparticles in apolar solvents by doping with Co2+

Anatase Co-doped TiO2 nanoparticles capped by oleic acid with a wide range of dopant concentrations (0-23.27%) were synthesized. The surface chemistry of the doped nanoparticles was probed by Fourier transform infrared spectroscopy and thermogravimetric analyses. An interesting effect of doping was discovered: doping with Co2+ at the nanocrystal surface significantly improves the solubility and dispersibility of the nanocrystals in apolar solvents, which can originate in the change in the self-assembled structure of the surface ligand from the weakly hydrophobic quasibilayer in undoped TiO2 nanorods to the strongly hydrophobic monolayer in Co-doped TiO2 nanocrystals.     

以磁纳米粒为核的pH敏感型聚谷氨酸树状分子药物载体

报道了一种新的肽类树枝状分子改性磁性纳米药物载体.以天然氨基酸L-谷氨酸为原料,通过收敛法合成了聚(L-谷氨酸)树状分子,将多巴胺配体键合到聚(L-谷氨酸)树状分子上,用核磁(1H-NMR)、质谱(MS)对合成出的树状分子配体进行了表征,然后通过配体交换对四氧化三铁磁纳米粒表面进行多功能化.以阿霉素为模型药物通过pH敏...     

Structure and morphology of spinel MFe2O4 (M=Fe, Co, Ni) nanoparticles chemically synthesized from heterometallic complexes

We synthesized magnetic spinel ferrites from trimetallic single-source precursors. Fe(II), Co(II), and Ni(II) ferrite nanoparticles in the range of 9-25 nm were synthesized by solvothermal decomposition of trimetallic acetate complex precursors in benzyl ether in the presence of oleic acid and oleylamine, using 1,2-dodecanediol as the reducing agent. For comparison, spinel ferrite nanoparticles were synthesized by stoichiometric mixtures of metal acetate or acetylacetonate salts. The nanoparticles (NP) were characterized by TEM, DLS, powder XRD, and Raman spectroscopy; and their magnetic properties were characterized by ZFC-FC and M(H) measurements. The ferrite-NP were more homogeneous and had a narrower size distribution when trimetallic complexes were used as precursors. As a consequence, the magnetic properties of these ferrite-NP are closer to the aimed room temperature superparamagnetic behavior, than are those of other ferrites obtained by a mixture of salts.     

多元醇还原法制备片状六边形Fe3O4纳米颗粒

在表面活性剂油酸和油胺,液相环境二苄醚体系中,利用多元醇还原法,采用1,2-十二烷二醇还原前驱体乙酰丙酮铁Fe(acac)3,通过表面活性剂、金属前驱体以及液相环境的共同作用,制备出了单分散片状六边形Fe3O4纳米颗粒。分析了表面活性剂以及还原剂多元醇对纳米颗粒尺寸及形貌的影响。TEM表征结果显示：与未使用表面活性剂的情况相比,油酸和油胺的加入抑制了颗粒的生长,使颗粒尺寸从24.2 nm降低到10.7 nm;颗粒形貌多样化,出现了片状六边形形貌的Fe3O4纳米颗粒。磁性能检测表明： Fe3O4纳米颗粒具有高饱和磁化强度（Ms=88 emu/g）和零剩磁的特点,有望作为磁标记材料应用在生物检测上     

Ferrofluids Containing Fe3O4 Nanoparticles in Solidified Photoresist Carrier

Ferrofluids, formed by magnetic nanoparticles uniformly dispersed in a liquid carrier, respond to an external magnetic field, which enable the fluid's position by applying a magnetic field. Here, ferrofluids composed of Fe₃O₄ nanoparticles with oleic acid and oleylamine as the surfactant and photoresist, respectively, were prepared. Under an external magnetic field, the movement and the position of ferrofluids and the injection of the fluids into complex shapes were easily achieved. The ferrofluid surfaces were distorted under the magnetic field, and the surface structue was controlled by the applied field strength. Using a photoresist as the liquid carrier, it was possible to solidify the ferrofluids by UV irradiation. The shape and the position of the solid superparamagnetic nanoparticles/polymer composites were also determined by the external magnetic field.     

Quantifying the Thermodynamics of Ligand Binding to CsPbBr3 Quantum Dots

Cesium lead halide perovskites are an emerging class of quantum dots (QDs) that have shown promise in a variety of applications; however, their properties are highly dependent on their surface chemistry. To this point, the thermodynamics of ligand binding remain unstudied. Herein, ¹H NMR methods were used to quantify the thermodynamics of ligand exchange on CsPbBr₃ QDs. Both oleic acid and oleylamine native ligands dynamically interact with the CsPbBr₃ QD surface, having individual surface densities of 1.2–1.7 nm^?2. 10‐Undecenoic acid undergoes an exergonic exchange equilibrium with bound oleate (K_eq=1.97) at 25 °C while 10‐undecenylphosphonic acid undergoes irreversible ligand exchange. Undec‐10‐en‐1‐amine exergonically exchanges with oleylamine (K_eq=2.52) at 25 °C. Exchange occurs with carboxylic acids, phosphonic acids, and amines on CsPbBr₃ QDs without etching of the nanocrystal surface; increases in the steady‐state PL intensities correlate with more strongly bound conjugate base ligands.     

表面羧基化Fe3O4磁性纳米粒子的快捷制备及表征

亲水性磁性纳米颗粒在生物科学领域有着广泛应用,本研究提出了一种快速对磁性纳米粒子表面进行羧基化的方法. 首先使用氯化铁和氯化亚铁为原料, 以油酸为表面活性剂, 通过共沉淀法制得油酸包覆的亲油性磁性纳米粒子, 然后用高锰酸钾进行原位氧化, 将覆盖在粒子表面的油酸中的C＝C键氧化成-COOH, 从而得到单层羧基功能化的亲水性磁性纳米粒子. 利用透射电镜(TEM)、X射线衍射(XRD)、傅利叶红外光谱仪(FT-IR)、热重分析仪(TGA)、振动样品磁强计(VSM)、Zeta电位分析仪等对其进行表征. 结果表明磁性纳米粒子表面被成功羧基化,粒子的平均直径约为9 nm,饱和磁化值为64.5 emu/g,剩磁和矫顽力近似为零,具有典型的超顺磁性. 羧基化磁性纳米粒子可在pH7-10的水溶液中形成稳定分散的磁流体,保存6周无沉淀出现.     

Synthesis of monodisperse biotinylated p(NIPAAm)-coated iron oxide magnetic nanoparticles and their bioconjugation to streptavidin

We describe here the synthesis of 10 nm, monodisperse, iron oxide nanoparticles that we have coated with temperature-sensitive, biotinylated p(NIPAAm) (b-PNIPAAm). The PNIPAAm was prepared by the reversible addition fragmentation chain transfer polymerization (RAFT), and one end was biotinylated with a PEO maleimide-activated biotin to form a stable thioether linkage. The original synthesized iron oxide particles were stabilized with oleic acid. They were dispersed in dioxane, and the oleic acid molecules were then reversibly exchanged with a mixture of PNIPAAm and b-PNIPAAm at 60 degrees C. The b-PNIPAAm-coated magnetic nanoparticles were found to have an average diameter of approximately 15 nm by dynamic light scattering and transmission electron microscopy. The ability of the biotin terminal groups on the b-PNIPAAm-coated nanoparticles to interact with streptavidin was confirmed by fluorescence and surface plasmon resonance. It was found that the b-PNIPAAm-coated iron oxide nanoparticles can still bind with high affinity to streptavidin in solution or when the streptavidin is immobilized on a surface. We have also demonstrated that the binding of the biotin ligands on the surface of the temperature-responsive magnetic nanoparticles to streptavidin can be turned on and off as a function of temperature.     

Peptide nucleic acid stabilized perovskite nanoparticles for nucleic acid sensing

Nanostructural hybrid organic-inorganic metal halide perovskites offer a wide range of potential applications including photovoltaics, solar cells, and light emitting diodes. Up to now the surface stabilizing ligands were used solely to obtain the optimal properties of nanoparticles in terms of dimensionality and stability, however their possible additional functionality was rarely considered. In the present work, hybrid lead bromide perovskite nanoparticles (PNP) were prepared using a unique approach where a peptide nucleic acid is used as a surface ligand. Methylammonium lead bromide perovskite colloidal nanoparticles stabilized by thymine-based peptide nucleic acid monomer (PNA-M) and relevant trimer (PNA-T) were prepared exhibiting the size below 10 nm. Perovskite structure and crystallinity were verified by X-ray powder diffraction spectroscopy and high resolution transmission electron microscopy. PNP-PNA-M and PNP-PNA-T colloidal dispersions in chloroform and toluene possessed green-blue fluorescence, while Fourier-transform infrared spectroscopy (FT-IR) and quantum chemical calculations showed that the PNA coordinates to the PNP surface through the primary amine group. Additionally, the sensing ability of the PNA ligand for adenine nucleic acid was demonstrated by photoluminescence quenching via charge transfer. Furthermore, PNP thin films were effectively produced by the centrifugal casting. We envision that combining the unique, tailored structure of peptide nucleic acids and the prospective optical features of lead halide perovskite nanoparticles could expand the field of applications of such hybrids exploiting analogous ligand chemistry.