甘氨酸修饰的Pt(111)电极上的氧还原

利用单晶旋转圆盘电极技术（Hanging Meniscus Rotating Disk Electrode,　HMRD）在硫酸和高氯酸溶液中分别研究了甘氨酸修饰的Pt(111)电极表面氧分子的电催化还原反应. 实验发现：在硫酸溶液中,经甘氨酸修饰的Pt(111)电极表面的氧还原活性明显提高,其中氧还原的半波电位与Pt(111)电极的相比正移约0.1 V,而在高氯酸溶液中,甘氨酸修饰的Pt(111)电极的活性几乎没有发生变化. 该实验结果表明：甘氨酸修饰的Pt(111)电极一方面抑制了SO₄^2-在电极表面的吸附,另一方面又能在电极表面提供相邻的空位供氧分子吸附. 通过与文献中报道的CN^-修饰的Pt(111)电极上的氧还原结果的对比,可以推测甘氨酸修饰的Pt(111)电极表面氧还原活性提高是由于甘氨酸在Pt(111)表面可能先被氧化成CN^-后吸附在电极表面,进而促进了氧分子的电催化还原反应.     

单壁碳纳米管Nafion复合膜修饰玻碳电极用于示差脉冲伏安法测定多巴胺

将单壁碳纳米管(SWCNT′s)分散在5%(质量分数)的Nafion溶液中并滴涂在玻碳电极表面,红外灯烘干后,制得了SWCNT′s/Nafion修饰电极。采用循环伏安法研究了多巴胺在修饰电极上的电化学行为。结果表明,多巴胺在该修饰电极上出现了一对氧化还原峰,其氧化峰峰电位(Epa)为0.408 V(对Ag/AgCl电极,下同),还原峰峰电位(Epc)为0.335 V,且其峰电流与裸玻碳电极比较增大50倍。据此提出了用示差脉冲伏安法测定多巴胺的方法。多巴胺的浓度在120μmol.L-1以内与对应的氧化峰电流呈线性关系,检出限(3S/N)为0.2μmol.L-1。修饰电极用于多巴胺注射液中多巴胺的测定,测定值与标示值相符,加标回收率在96.2%～101.0%之间。     

氯霉素在p-PTA/CS-AB/GCE修饰电极上的电化学行为及测定

制备了聚磷钨酸/壳聚糖-乙炔黑修饰电极(p-PTA/CS-AB/GCE),采用循环伏安法(CV)研究了氯霉素在该修饰电极上的电化学行为。结果表明,在p H 6.0的PBS溶液中,氯霉素(CAP)在该修饰电极上出现1个还原峰,在40~400 m V/s扫速范围内,CAP的还原峰电流与扫速呈线性关系,说明CAP在修饰电极上的电化学反应过程是受吸附控制的不可逆过程。用差分脉冲伏安法(DPV)对不同浓度的CAP进行检测,在5.0×10-7~1.0×10-4mol/L浓度范围内,还原峰电流与浓度呈线性关系,检出限(S/N=3)为5.13×10-8mol/L。用该方法对氯霉素片进行检测,相对标准偏差(RSD)为1.4%,回收率为97.7%~105.1%。     

聚氨基黑10B/Nafion修饰电极上多巴胺的检测

用电化学聚合法制备了聚氨基黑10B/Nafion修饰电极,利用循环伏安法研究了多巴胺在此修饰电极上的电化学行为.在磷酸盐缓冲溶液(pH 6.0)中,多巴胺在修饰电极上呈现可逆的氧化还原峰.其峰电位都随pH值的增加而负移.多巴胺氧化还原峰电流与其浓度在0.2～30 μmol/L范围内呈良好的线性关系;检出限为1.0×10~7 mol/L.实验结果表明:本修饰电极具有良好的重现性、稳定性和较强的抗干扰能力.将此修饰电极用于多巴胺注射液和小牛血清中多巴胺的检测,结果令人满意.     

离子液体-Ni微/纳米粒子协同电催化检测维生素B2

本文制备了离子液体-Ni微/纳米粒子修饰碳糊电极.研究了离子液体对Ni微/纳米粒子氧化还原的促进作用,用循环伏安法在0.1 mol/L B-R缓冲溶液(pH=4.5)中研究了维生素B2(VB2)在该修饰电极上的电化学行为,优化了各种实验条件.实验结果表明,本文制备的修饰电极能很好地催化氧化VB2,VB2在该修饰电极上的...     

纳米金/Nafion/石墨烯修饰玻碳电极检测对苯二酚的研究

采用一步电化学共还原的方法将纳米金(AuNPs)、Nafion、电化学还原石墨烯(ERGO)修饰到玻碳电极(GCE)表面,制成修饰电极AuNPs/Nafion/ERGO/GCE。以扫描电镜对其进行表征,用循环伏安法和微分脉冲伏安法研究对苯二酚在该修饰电极上的电催化行为。优化了实验参数,对苯二酚在2.0～100μmol/L及100～800μmol/L浓度范围内与其氧化峰电流呈良好的线性关系,检出限为0.3μmol/L。用该修饰电极成功地进行了实际水样中对苯二酚含量的测定。     

纳米银-多壁碳纳米管修饰玻碳电极用于微分脉冲伏安法测定水中氯离子

用化学镀方法制备了纳米银覆盖多壁碳纳米管的复合材料,将其分散在水中配成1.0g·L~(-1)的悬浮液并滴涂在玻碳电极表面,制得纳米银-多壁碳纳米管修饰电极(nano Ag/MWCNT's/GCE)。用循环伏安法研究了在pH 6.0的磷酸盐支持电解质中,在—0.60～1.0V(vs.SCE)电位范围内,氯离子在nano Ag/MWCNT's/GCE上的电化学行为,结果表明:在氮气氛围中,修饰电极的氧化峰和还原峰分别位于0.19V和—0.20V电位处;随着氯离子浓度的增加,修饰电极的氧化峰电流降低,氯离子浓度在8.0×10~(-3)～0.1mol·L~(-1)之间与微分脉冲氧化峰电流的降低值呈线性关系。提出了用微分脉冲伏安法测定氯离子的方法,修饰电极用于自来水中氯离子的测定,回收率在98.5%～100.3%之间。     

甲基对硫磷在聚噻吩/纳米二氧化钛修饰玻碳电极上的电化学行为及其测定

用循环伏安法(CV)、线性扫描溶出伏安法(LSSV)研究了甲基对硫磷(MPT)在聚噻吩/纳米二氧化钛修饰玻碳电极(PTh-NTiO2/GCE)上的电化学行为.实验表明,该修饰电极能显著提高MPT的氧化还原峰电流,在B-R缓冲溶液(pH 5.72)中,于-0.662V( vs.SCE)处产生灵敏的不可逆还原峰,其峰电流与...     

石墨烯-金纳米粒子复合膜修饰电极的制备及对双酚A的测定

采用电化学还原技术,通过一步电沉积制备了石墨烯-金纳米粒子复合膜修饰电极(ERGO-Au/GCE).采用透射电子显微镜(TEM)和循环伏安(CV)法对修饰电极进行了表征,并研究了双酚A(BPA)在该修饰电极上的电化学行为.结果表明,所制备的复合物修饰电极对双酚A有明显的电催化效果.在p H=6.0的磷酸盐缓冲溶液中,双酚A在0.3~1.0 V扫描电位范围内有1个不可逆的氧化还原峰出现.在优化的条件下,双酚A的浓度在3.00×10-8~1.30×10-5mol/L范围内与其氧化峰电流呈线性关系,检出限为1.0×10-8mol/L(S/N=3).将该修饰电极用于饮用水和塑料制品中双酚A含量的测定,回收率为96.4%~103.5%.     

镍纳米粒子-离子液体修饰碳糊电极的制备及其对多巴胺的测定

制备了镍纳米粒子-离子液体修饰电极,在0.1 mol/L磷酸缓冲溶液(pH 6.0)中研究了多巴胺(DA)在修饰电极上的电化学行为.与裸电极相比,DA在该修饰电极上的氧化还原电位明显降低,氧化还原反应的峰电流明显增大,DA的峰电流与其浓度在2.0×10~(-8) ～1.0×10~(-4) mol/L范围内呈良好的线性关系,检出限为6.5×10~(-9) mol/L.该修饰电极对抗坏血酸具有明显的抗干扰能力.     

Sensitive and Selective Detection of Dopamine Using a DNA Immobilized Ethylenedidamine/Polyglutamic Modified Electrode

DNA was attached on the surface of an ethylenedidamine/polyglutamic(En/PGA) modified glassy carbon electrode (GCE) to create a novel voltammetric sensor (DNA/En/PGA/GCE) for dopamine (DA). This modified electrode exhibited a linear voltammetric response for DA in the range from 1.0×10^?7 mol L^?1 to 1×10^?5 mol L^?1, with a detection limit of 2×10^?8 mol L^?1. The detection of DA was found to be unaffected by the presence of ascorbic acid, uric acid, serotonin and folic acid. The method proposed was applied to detect DA in pharmaceutical dosage and human blood serum with good satisfactory results.     

Polystyrene sulphonate wrapped multiwalled carbon nanotubes modified graphite electrode for simultaneous determination of ascorbic acid, dopamine and uric acid

Graphite electrode is modified by casting multi-walled carbon nanotubes (MWCNTs) wrapped with polystyrene sulphonate (PSS) onto the surface of the bare graphite electrode. The modified electrode was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The behavior of the modified electrode towards the oxidation of ascorbic acid (AA), dopamine (DA) and uric acid (UA) has been determined by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and chronoamperometry (CA). The modified electrode showed better electrocatalytic activity towards AA, DA and UA compared to bare graphite electrode. The electrochemical oxidation signals of AA, DA and UA are well separated into three distinct peaks with peak potential difference of 222, 128 and 350 mV between AA-DA, DA-UA and AA-UA respectively in CV studies and corresponding peak potential separation in DPV are 228, 120 and 348 mV. This modified electrode was successfully used for simultaneous determination of AA, DA and UA in ternary mixture.     

Enhancement of surface wettability via the modification of microtextured titanium implant surfaces with polyelectrolytes

Micrometer- and submicrometer-scale surface roughness enhances osteoblast differentiation on titanium (Ti) substrates and increases bone-to-implant contact in vivo. However, the low surface wettability induced by surface roughness can retard initial interactions with the physiological environment. We examined chemical modifications of Ti surfaces [pretreated (PT), R(a) ≤ 0.3 μm; sand blasted/acid etched (SLA), R(a) ≥ 3.0 μm] in order to modify surface hydrophilicity. We designed coating layers of polyelectrolytes that did not alter the surface microstructure but increased surface ionic character, including chitosan (CHI), poly(L-glutamic acid) (PGA), and poly(L-lysine) (PLL). Ti disks were cleaned and sterilized. Surface chemical composition, roughness, wettability, and morphology of surfaces before and after polyelectrolyte coating were examined by X-ray photoelectron spectroscopy (XPS), contact mode profilometry, contact angle measurement, and scanning electron microscopy (SEM). High-resolution XPS spectra data validated the formation of polyelectrolyte layers on top of the Ti surface. The surface coverage of the polyelectrolyte adsorbed on Ti surfaces was evaluated with the pertinent SEM images and XPS peak intensity as a function of polyelectrolyte adsorption time on the Ti surface. PLL was coated in a uniform thin layer on the PT surface. CHI and PGA were coated evenly on PT, albeit in an incomplete monolayer. CHI, PGA, and PLL were coated on the SLA surface with complete coverage. The selected polyelectrolytes enhanced surface wettability without modifying surface roughness. These chemically modified surfaces on implant devices can contribute to the enhancement of osteoblast differentiation.     

Electrochemical and spectroscopic characterization of quinone functionalized exfoliated graphite.

Natural graphite was exfoliated by thermal decomposition of graphite-bisulfate intercalation compound. Oxidative/reductive pre-treatment of exfoliated graphite was subsequently carried out to introduce various functional groups on the graphite surface. The resulting material was covalently modified with redox active quinones. The covalent modification was effected through oxygen containing functional groups formed on the graphite surface. The modified exfoliated graphite was characterized by infra-red (FTIR) and X-ray photoelectron spectroscopy (XPS). Electrochemical characterization of the pressed pellets of the modified graphite showed that the modification occurred at the edge sites. These electrodes were found to be very stable and the surface renewal was simply accomplished by polishing the surface using SiC emery sheets. Application of the benzoquinone modified electrode for the electrocatalysis of ascorbic acid oxidation was demonstrated.     

Pattern generation of biological ligands on a biodegradable poly(glycolic acid) film

The micropatterns of biological ligands (biotin and RGD peptides) were generated on a flat surface of biodegradable polymer, poly(glycolic acid) (PGA). The immobilization of biological ligands onto the surface of biodegradable polymers (especially aliphatic polyesters) is usually hampered by the absence of functionalizable groups on the polymer backbone. We demonstrate herein that PGA polymer films were modified by surface hydrolysis to introduce carboxylic acid groups on the film surfaces, which were subsequently used for patterning amine-terminated ligands by microcontact printing. Fluorescence microscopy was used to verify the pattern of biotin on the surface of the PGA films after complexation with fluorescein-conjugated streptavidin. In addition, the cellular micropatterns were obtained from micropatterns of RGD peptides on the surface-hydrolyzed PGA films.     

Detection of Uric Acid in the Presence of Dopamine and High Concentration of Ascorbic Acid Using PDDA Modified Graphite Electrode

The properties of graphite electrode (Gr) modified with poly(diallyl dimethyl ammonium chloride) (PDDA) for the detection of uric acid (UA) in the presence of dopamine (DA) and high concentration of ascorbic acid (AA) have been investigated by cyclic voltammetry, differential pulse voltammetry and chronoamperometry. The polymer modified graphite electrode was prepared by a very simple method just by immersing the graphite electrode in PDDA solution for 20 minutes. The PDDA/Gr modified electrode displayed excellent electrocatalytic activity towards the oxidation of UA, DA and AA compared to that at the bare graphite electrode. The electrochemical oxidation signals of UA, DA and AA are well resolved into three distinct peaks with peak potential separations of 220 mV, 168 mV and 387 mV between AA‐DA, DA‐UA and AA‐UA respectively in cyclic voltammetry studies and the corresponding peak potential separations are 230 mV, 130 mV and 354 mV respectively in differential pulse voltammetry. The lowest detection limits obtained for UA, DA and AA were 1×10^?7 M, 2×10^?7 M and 800×10^?9 M respectively. The PDDA/Gr electrode efficiently eliminated the interference of DA and a high concentration of AA in the determination of UA with good selectivity, sensitivity and reproducibility. The modified electrode was also successfully applied for simultaneous determination of UA, DA and AA in their ternary mixture.     

Oxidative polymerization of acrylamide in the presence of thioglycolic acid

Chemical polymerization of acrylamide at room temperature was examined by using thioglycolic acid-cerium (IV) sulfate and thioglycolic acid-KMnO₄ redox systems in acid aqueous medium. Water soluble polyacrylamides containing thioglycolic acid end groups were synthesized. The effects of the molar ratio of acrylamide to Ce(IV) n _AAm /n _Ce(IV) , the polymerization time, the temperature, the monomer concentration, the molar ratio of cerium (IV) sulfate to thioglycolic acid and the concentration of sulfuric acid on the yield and molecular weight of polymer were investigated. Lower molar ratios of acrylamide/Ce(IV) at constant monomer concentration resulted in an increase in the yield but a decrease in molecular weight of polymer. The increase of reaction temperature from 20 to 70°C resulted in a decrease in the yield but generally resulted in a constant value for the molecular weight of polymer. With increasing polymerization time, the yield and molecular weight of polymer did not change substantially. Ce(IV) and Mn(VII) ions are reduced to Ce(III) and Mn(II) ions respectively in the polymerization reaction. The existence of Ce(III) ion bound to polymer was investigated by UV-visible spectrophotometry and fluoresce measurements. The amount of Mn(II) incorporated into the polymer was determined using graphite furnace atomic absorption spectrometry. The mechanism of this phenomenon is discussed.     

环氧基功能化SBA-15介孔分子筛的制备、表征及其固定化青霉素酰化酶

利用表面嫁接法和乙烯基环氧化法制备了环氧基团功能化介孔分子筛G-SBA-15和O-SBA-15,并对其结构和表面性质进行了表征.结果表明,G-SBA-15和O-SBA-15均具有良好的长程有序结构,二者环氧基团的含量分别为0.78 mmol/g和0.37 mmol/g,在O-SBA-15表面还存在一定数量的乙烯基基团.G-SBA-15和O-SBA-15用于固定青霉素酰化酶(pen ic illin G acylase,PGA),固定化酶PGA/G-SBA-15和PGA/O-SBA-15在37℃时水解青霉素G钾制备6-氨基青霉烷酸(6-APA)的表观活性分别为1075 IU/g和1761 IU/g.PGA/G-SBA-15经4次使用后表观活性趋于稳定,经10次使用后保持其初始活性的83.7%.PGA/O-SBA-15在重复使用中,表观活性出现持续衰减,10次使用后保持其初始活性的51.6%,PGA/G-SBA-15的操作稳定性明显好于PGA/O-SBA-15.     

Steady surface modification of polydimethylsiloxane microchannel and its application in simultaneous analysis of homocysteine and glutathione in human serum

A novel polydimethylsiloxane (PDMS) surface modification method for microchip electrophoresis has been developed to make a stable and sufficient electroosmotic flow (EOF). Poly(l-glutamic acid) (PGA) which had ionizable carboxyl groups at a high pH-range was immobilized on the surface of microchannel fabricated with PDMS. The surface modification involved surface oxidation by plasma, the silanization of 3-aminopropyldimethylethoxysilane (APDMES) and immobilization of PGA via amide bond. The modified channel was extremely stable against consecutive electric power supply over 5h, and its long-term stability was demonstrated by the efficient separation of four amino acid derivatives reproducibly after a week. Additionally, homocysteine (Hcy), important risk factor of cardiovascular disease, osteoporosis and problems in pregnancy, was successfully measured in human serum in modified PDMS channel with the other thio amino acid simultaneously.     

聚己二酸甘油酯的合成及其对聚乳酸材料的增韧

以丙三醇、己二酸为原料,通过熔融缩聚合成了新型聚乳酸(PLA)增韧改性剂聚己二酸丙三醇酯(PGA).利用傅立叶变换红外光谱(FT-IR),核磁共振氢谱(1H-NMR)及凝胶渗透色谱(GPC)等方法对不同反应温度条件下PGA的分子结构进行了表征.同时通过熔融共混制备了PGA/PLA共混物,并测试了共混物的冲击性能,利用差示扫描量热仪(DSC)和扫描电子显微镜(SEM)对其热性能及相形貌进行了表征.结果表明:PGA可以有效增韧聚乳酸,160℃下合成的PGA增韧性最佳,冲击强度达到48.0 J/m,较纯聚乳酸提高了3倍.PGA分子支化结构的差异对PGA/PIA的共混形态有明显的影响,从而进一步影响其增韧效果.