Preparation of Monodisperse Cationic Microspheres by Dispersion Polymerization of Styrene and a Cation-Charged Monomer in the Absence of a Stabilizer

Cationic polystyrene (PS) microspheres with monodispersity were prepared by dispersion polymerization of styrene and [2-(methacyrloyloxy) ethyl] trimethylammonium chloride (METMAC) in methanol/water system. The effects of METMAC, styrene, and initiator concentration as well as solvent composition on the diameters and size distribution of PS microspheres were systematically investigated. The results indicated that monodisperse cationic PS microspheres could be generated at METMAC concentration less than 2 mol% relative to styrene amount, and too high or low styrene amount was unfavorable to produce cationic PS microspheres. Moreover, it was found that with initiator concentration increasing, the average diameter and the size distribution of cationic PS microspheres also markedly increased. Solvent composition played a significantly important role in the preparation of cationic PS microspheres by dispersion polymerization of styrene and METMAC. Finally, the possible growth and stabilization mechanism of cationic PS microspheres was proposed. The electrostatic repulsion derived from positive charge on the surface of PS microspheres was responsible for the stabilization during dispersion polymerization in the absence of a stabilizer.     

分散聚合法制备液相芯片聚苯乙烯磁性复合微球的研究

本文将丙烯酸基磁流体均匀分散到苯乙烯单体中,采用分散聚合法制备出了适于构建液相芯片微球载体的单分散性微米级磁性微球.考察了丙烯酸基磁流体预处理时间、加料顺序和单体量对微球形貌和粒径分布的影响及其条件优化.扫描电镜(SEM)显示磁性微球平均粒径为7.77 μm,具有良好的单分散性(多分散指数PDI为1.03),并且表面光滑致密;用超导量子干涉磁强计测量了Fe3O4纳米粒子的磁化曲线;用红外光谱(FT-IR)和热失重(TG)方法表征了磁性微球的化学结构及Fe3O4含量.     

Synthesis of polymeric microspheres from a Merrifield resin by surface‐initiated nitroxide‐mediated radical polymerization

Polymeric microspheres were prepared from a Merrifield resin via nitroxide‐mediated radical polymerization. Polystyrene, poly(acetoxystyrene), and poly[styrene‐b‐(methyl methacrylate‐co‐styrene)], poly(acetoxystyrene‐b‐styrene), and poly(styrene‐co‐2‐hydroxyethyl methacrylate) copolymers were demonstrated to graft onto 2,2,6,6‐tetramethyl‐1‐piperidinyloxy nitroxide bound Merrifield resins. The polymerization control was enhanced both on the surface and in solution by the addition of sacrificial nitroxide. The significant increase in the particle diameter (more than a fivefold volume increase for polystyrene brushes) showed that polymer growth was not only on the surface but also within the particles, and this diameter increase could be adjusted through changes in the molecular weight of the polymers. The microspheres were characterized by elemental analysis, IR spectroscopy, particle size analysis, and optical microscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2145–2154, 2005     

Effects of dispersion stabilizer and reaction solvent on forming monodisperse polystyrene microspheres by dispersion polymerization

We used poly(aspartic acid) (PAsp) synthesized by ion exchange with sodium polyaspartate (PAspNa) as a dispersion stabilizer. PAsp improved the dispersion stability and the solubility in the medium for dispersion polymerization. The effects of the stabilizer hydrophobicity on particle formation, conversion, particle diameter, and its distribution of polystyrene microspheres were investigated by using both biodegradable polymers as a dispersion stabilizer. According to these results, we concluded that the polymerization rate of the styrene with PAsp was higher than that of styrene with PAspNa. That is why, smaller and more monodisperse microspheres were prepared with PAsp, compared to those with PAspNa.     

PSt种子与“花瓣”形PSt/PAN复合颗粒的制备

以过硫酸钾为引发剂,在乙醇/水的混合介质中使苯乙烯进行无皂乳液聚合,得到了单分散亚微米级聚苯乙烯(PSt)微球.用扫描电子显微镜研究了引发剂浓度、单体浓度、反应温度和溶剂组成对PSt微球粒径的影响.结果表明,改变上述条件能明显影响其粒径.以所得单分散聚苯乙烯微球为种子,在丙烯酸单封端聚乙二醇大分子单体存在的条件下,使丙烯腈和少量苯乙烯进行新的无皂种子乳液聚合,在合适的条件下制得到了“花瓣”形的聚合物复合颗粒,为深入探讨这类特殊形态聚合物颗粒的形成机理提供了新的佐证.     

Preparation of monodisperse poly(St‐co‐PETEA) microspheres by precipitation polymerization using ethanol as solvent

Precipitation polymerization of styrene (St) was carried out with pentaerythritol tetraacrylate (PETEA) to produce monodisperse crosslinked microspheres. A much safer ethanol replaced acetonitrile as a solvent in precipitation polymerization of monodisperse crosslinked poly(St‐co‐PETEA) microspheres. Monodisperse crosslinked microspheres with high monomer conversion were achieved within 4 hr. Uniform and well‐separated monodisperse were obtained in ethanol when PETEA concentration varied from 30 vol% to 90 vol% and the particle diameter decreased from 0.75 to 0.58 µm. The particle yield increased from 36.51 to 64.38% by increase in the initiator loading from 1 to 8 wt%. No coagulum occurred between particles when the polymerization time varied from 2 to 10 hr. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of polystyrene microspheres by dispersion polymerization in supercritical carbon dioxide using a poly(dimethylsiloxane)-based macroazoinitiator

The synthesis of polystyrene microspheres was achieved by the dispersion polymerization of styrene in supercritical carbon dioxide using azobisisobutylonitrile (AIBN) and a poly(dimethylsiloxane) (PDMS)-based macroazoinitiator, VPS-1001. VPS-1001 contained seven to nine molecules of the azo groups and the PDMS blocks with a molecular weight of 10,000 per molecule. The polymerization in the presence of both VPS-1001 and AIBN produced polystyrene microspheres with a diameter below 4 μm in over 85% yields, whereas the polymerization with VPS-1001 in the absence of AIBN provided a nonspecific polystyrene in only 20% yield. The particle size decreased as a result of increasing the concentration of VPS-1001. It was confirmed that the polystyrene particles were stabilized by the PDMS-block-polystyrene formed through the polymerization initiated by VPS-1001 because the polymerization using a PDMS homopolymer provided nonspecific polystyrene as a precipitate during the polymerization.     

苯乙烯/二乙烯基苯在乙醇/乙二醇单甲醚中分散共聚合速率及粒子大小的研究

以乙醇 乙二醇单甲醚 (EOH EGME)为介质 ,羟丙基纤维素 (HPC)为稳定剂 ,偶氮二异丁腈 (AIBN)为引发剂进行了苯乙烯和二乙烯基苯的分散共聚合研究 .制得粒径在 6～ 10 μm范围内的单分散交联聚苯乙烯微球 (CPS) .探讨了不同介质配比 ,以及苯乙烯、二乙烯基苯、引发剂的浓度对微球大小、粒径分布、聚合速率及稳定性的影响 .当苯乙烯和AIBN浓度增加时 ,聚合速率和平均粒子尺寸增加 ,而粒子分布变宽 ,粒子数先增加 ,而后降低 .随着EOH EGME比例的增加 ,平均粒子尺寸增加 ,而分布指数降低 ,稳定剂增加 ,粒子尺寸降低和粒子数增加 ,但对聚合速率及粒子分布影响不太明显 .另外还探讨了单体和交联剂的后滴加法对微球大小、粒径分布的影响     

氨基两亲高分子磁性微球的制备与表征

采用分散聚合法,以乙醇水为介质,在Fe3O4磁流体存在下,通过苯乙烯与聚氧乙烯大分子单体(MPEO)共聚制备了同时具有两亲性和磁响应性的端基为氨基的高分子微球.改变聚合条件可以得到平均粒径范围在5～80μm,氨基含量为0.01～0.25mmolg的两亲磁性高分子微球.     

NARROW-DISPERSED CROSSLINKED CORE-SHELL POLYMER MICROSPHERES PREPARED BY SURFACE-INITIATED ATOM TRANSFER RADICAL POLYMERIZATION＊

Grafting of polystyrene with narrowly dispersed polymer microspheres through surface-initiated atom transfer radical polymerization (ATRP) was investigated. Polydivinylbenzene (PDVB) microspheres were prepared by dispersion polymerization with poly(N-vinyl pyrrolidone) (PVP) as stabilizer. The surfaces of PDVB microspheres were chloromethylated by chloromethyl methyl ether in the presence of zinc chloride as catalyst to form chloromethylbenzene initiating core sites for subsequent ATRP grafting of styrene using CuCl/bpy as catalytic system. Polystyrene was found to be grafted not only from the particle surfaces but also from within a thin shell layer, resulting in the formation of particles size increased from 2.38-2.58μm, which can further grow to 2.93μm during secondary grafting polymerization of styrene. This demonstrates that grafting polymerization proceeds through a typical ATRP procedure with living nature. All of the prepared microspheres have narrow particle size distribution with coefficient of variation around 10%.     

Preparation of fluorescent polystyrene microspheres by gradual solvent evaporation method

Highly cross-linked polystyrene beads of 9.2 μm were synthesized by seed polymerization with styrene as monomer and divinylbenzene as cross linker. Other sized monodisperse PS microspheres were also prepared by varying seed particle diameter and proportion of swelling agents. Furthermore, the polystyrene beads were stained by gradual solvent evaporation method using dyes such as rhodamine 101 and acridine orange. Gradual solvent evaporation method facilitates a high concentration of fluorescent dyes on beads. This is the key to obtain fluorescent beads with high intensity. The results showed that the fabricated fluorescent microspheres could be excited to various wavelengths (such as yellow, green, red and scarlet). Our synthesized microspheres offer high fluorescence emission efficiency compared to commercial fluorescent microspheres in the mean time have other properties in common.     

Fully crosslinked poly(styrene‐co‐divinylbenzene) microspheres by precipitation polymerization and their superior thermal properties

Fully crosslinked, stable poly(styrene‐co‐divinylbenzene) microspheres, which are composed of various concentrations of divilylbenzene from 5 to 75 mol % based on styrene monomer, were prepared without a significant particle coagulation by the precipitation polymerization. The number‐average particle diameter ranged from 3.5 to 2.8 μm and decreased with an increasing concentration of divinylbenzene in monomer. In addition, the coefficient of variation of the microspheres was slightly reduced with the increasing concentration of divinylbenzene. The circularity and the measured specific surface area indicated that lesser particles are coagulated because of the improved stability of individual particles at a high divinylbenzene concentration and that the resulting particles have a smooth surface without micropores. The glass‐transition temperature was not observed for all microspheres formed from the range of divinylbenzene concentrations. In addition, the onset of the thermal‐degradation temperature was increased from 339.8 to 376.9 °C upon higher contents of divinylbenzene. On the basis of the DSC and thermogravimetric data, the polymer microspheres prepared by the precipitation polymerization possessed a fully crosslinked structure and highly enhanced thermal stability. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 835–845, 2004     

细乳液聚合法制备磁性复合微球及其表征

在制备超细Fe3O4 磁性粒子的基础上 ,以 3种低分子量聚合物Disperbyk 1 0 6、Disperbyk 1 0 8和Disperbyk 1 1 1为Fe3O4 微粒在单体相中的分散稳定剂 ,采用细乳液聚合法制备了平均粒径为 3 40nm的PS Fe3O4 磁性复合微球 .详细研究了分散剂种类对细乳液聚合制备磁性复合微球的影响 ,并采用XRD、TGA和TEM等手段对磁性复合微球的形态、结构及磁响应性等进行了表征 .实验结果证明分散剂的选择对磁性复合微球的成功制备起着至关重要的作用 ,兼具酸性和碱性功能基的分散剂Disperbyk 1 0 6具有更好的分散和稳定效果 .TEM结果表明 ,所制备的复合微球具有一些缺陷 ,而缺陷处往往是Fe3O4 磁性粒子聚集的地方     

热敏性高分子包裹的磁性微球的合成

磁性高分子微球由于其在外加磁场作用下简单、快速易行的磁分离特性，其在细胞分离、固定化酶、靶向药物等领域的应用研究日益活跃，并显示出较好的应用前景［１］．有关文献报道了制备磁性微球的不同方法［２］．Ｎ 异丙基丙烯酰胺（Ｎ ｉｓｏｐｒｏｐｙｌａｃｒｙｌａ...     

Preparation of Micron-size Functional Fluorescent Microspheres

As a kind of special functional microspheres, fluorescent polymer microspheres could be used in cell label and separation, blood flow assay, flow cytometer marking, chemical reaction assay,and in analyst of the transform and diffusion of particles in soil 1. However, one of the most important applications of fluorescent microspheres is in the high-throughput screening of drugs (HTS) 2. Through affinity interaction, radioactive ligands (latent drugs) are bound to fluorescent microspheres covered by receptor, and luminescence is produced by radioactivity, so ligands can be assayed and screened.In this study, we developed a technique for preparing micron-size fluorescent microspheres with different functional groups. The methods included the synthesis of micron-size polystyrene microspheres through the dispersion polymerization of styrene in different media such as ethanol,ethanol-water, and isopropanol; the functional polystyrene microspheres were prepared by introduction of functional monomers into the reaction system of styrene; the functional fluorescent microspheres were obtained by the way of dying functional microspheres in the fluorescent material's ethanol solvent.The average diameter of microspheres was in the range of 1～10 μm, and the distribution was normal distribution. The functional groups included -OH, -CHO, -COOH, -CONH2, and SO3H. The absorbing spectrum and exciting spectrum were tested, the results showed that the maximal absorbance of fluorescent microsphere was near 306.5 nm, and its maximal excitation was near 362 nm. The excitation spectrum of fluorescent material (DPO) and fluorescent microspheres were shown in figure 1, and it indicated that the developed fluorescent microspheres showed the same excitation behavior like DPO, which related to the fluorescent microspheres had stable luminescence property.     

单分散、大粒径聚苯乙烯微球的制备

以聚乙烯基吡咯烷酮为分散剂、偶氮二异丁腈为引发剂、醇／水混合物为分散介质进行了苯乙烯的分散聚合，讨论了初始单体浓度、分散剂用量、引发剂浓度、分散介质组成和反应温度等反应条件对所得聚合物颗粒直径和直径分布的影响．通过大量的试验，筛选出了较为理想的分散聚合的条件及配方，制备出了粒径为４８μｍ的单分散聚苯乙烯微球．然后，以分散聚合所制得的聚合物颗粒为种子，用动力学溶胀法制成了粒径增大近四倍的单分散、大粒径聚苯乙烯微球，并讨论了滴水速度和补加分散剂对溶胀的影响     

Synthesis and characteristics of microspheres of polystyrene derivatives

Two sytrene derivatives formylstyrene and styrene sulfonylcholoride, were synthesized. Polymeric microspheres in diameters ranging from 0.1 to 2 μm were synthesized by polymerization of chlormoethylstyrene, formylstyrene, and styrene sulfonylcholoride in organic solvents, in the presence of appropriate surfactants. The kinetics of microsphere formation were studied. The molecular weight distribution of the products was determined by gel permeation chromatography. Conditions for binding various amino ligands to the microspheres were also established.     

两亲高分子微球的合成与表征

通过苯乙烯和聚氧乙烯大分子单体的共聚,合成了粒径在0.5μm～1.5μm的两亲高分子微球.随着聚氧乙烯大分子单体浓度的增加,微球粒径减小.通过扫描电镜,IR等分析手段对微球进行了表征.     

Precipitation polymerization in acetonitrile and 1‐propanol mixture: synthesis of monodisperse poly(styrene‐co‐divinylbenzene) microspheres with clean and smooth surface

Precipitation polymerization of styrene (St)–divinylbenzene (DVB) has been carried out using acetonitrile/1‐propanol mixture as the reaction media and 2,2′‐azobisisobutyronitrile (AIBN) as initiator. Monodisperse micron‐sized poly(St‐co‐DVB) microspheres with clean and smooth surface were synthesized in the absence of any stabilizing agent such as surfactants or steric stabilizers. The effects of various polymerization parameters such as 1‐propanol fraction in the reaction media, initiator and total monomer concentration, DVB content, polymerization time and polymerization temperature on the morphology, particle size and size distribution were investigated. It was found that smoothly shaped stable particles were obtained when less than 70 vol% of 1‐propanol was used in the media. The particle size increased with the AIBN concentration, whereas the change of uniformity was less obvious. Monodisperse microspheres were obtained when the total monomers loading ranged from 0.5 to 3 vol%. The particle diameter ranged from 2.73 to 1.87 µm with an increasing DVB content and the uniformity was enhanced. In addition, the yield of microspheres increased with the increasing total monomer, initiator, and DVB concentration and polymerization time. Copyright © 2010 John Wiley & Sons, Ltd.