中空纤维膜液相微萃取-高效液相色谱联用技术测定尿液中痕量己烯雌酚

采用中空纤维液相微萃取与高效液相色谱联用技术测定了尿液样品中的痕量己烯雌酚;考察了样品相酸度、中间相种类、接收相浓度、搅拌速度、萃取时间等对液-液-液三相微萃取效率的影响,进而确定了最佳萃取条件.结果表明,当样品相pH为2.5,中间相为甲苯,接收相为3μL 0.25mol/L氢氧化钠溶液,搅拌速度为800r/min,萃取时间为50min时,萃取效率最佳.在最佳萃取条件下,样品的回收率为76.4%,相对标准偏差为3.8%.     

中空纤维膜液相微萃取及常规分析用于气相色谱-质谱分析白酒中的正己酸乙酯的比较研究

应用中空纤维膜液相微萃取技术(HF-LPME),及常规分析法与气相色谱-质谱(GC-MS)联用分别测定了3种浓香型白酒中的正己酸乙酯.两种方法都采用内标法定量,内标物为乙酸正戊酯.中空纤维膜液相微萃取的优化条件为:萃取溶剂为4.0 μL正己烷,搅拌速度为1 000 r/min,萃取时间为20 min.中空纤维膜液相微萃取法及常规前处理分析法的线性范围分别为25～400 mg/L、5.0～500 mg/L,检出限分别为0.25 mg/L、0.03 mg/L,加标回收率分别为83.7%～118%、78.4%～94.2%,相对标准偏差分别为9.4%～15.6%、3.5%～4.9%.     

液-液-液三相液相微萃取-高效液相色谱法检测尿样中的安非他明和氯胺酮

建立了液-液-液三相液相微萃取与高效液相色谱联用技术测定尿样中的安非他明和氯胺酮的方法。考察了萃取溶剂、料液相pH值、搅拌速度、萃取时间和接受相HCl浓度等因素对富集因子的影响,得到了萃取溶剂为300 μL甲苯,料液相pH值为11,接受相为1.0 μL 0.1 mol/L HCl,搅拌速度为600 r/min,萃取时间为50 min的最佳实验条件。在该条件下,获得了较高的富集因子;方法的线性范围为安非他明0.01～10 μg/mL,氯胺酮0.01～5 μg/mL,相对标准偏差均小于2%,检测限均为5 ng/mL (S/N=3)。建立的三相液相微萃取方法能有效地去除复杂基体的干扰,有机溶剂消耗少,萃取效率高,是一种有效、灵敏的样品前处理方法,适合于尿样中安非他明和氯胺酮的测定。     

中空纤维膜微萃取/超高效液相色谱法检测大肠杆菌中氨基酸的研究

建立了三相中空纤维膜微萃取/超高效液相色谱(HF-LPME/UHPLC)方法,用于大肠杆菌中8种氨基酸的测定。设计了三相中空纤维膜微萃取系统,优化了HF-LPME最佳萃取条件:液膜为正辛醇,接收相Na OH的浓度为0.30 mol/L,给出相样品溶液中盐酸浓度为5.0 mmol/L,Na Cl质量浓度为200 g/L,萃取温度为25℃,搅拌速度为500 r/min,萃取时间为4 h。8种氨基酸经衍生并萃取后进行色谱分析,在5 min内达基线分离,其峰面积与浓度在0.20~4.9×10~3μmol/L范围内呈良好的线性关系,相关系数r2均大于0.999,富集倍数为110~290倍,检出限为0.08~0.35μmol/L。在10μmol/L加标水平下,大肠杆菌样品的平均回收率为88.7%~103.1%,相对标准偏差(n=5)为3.2%~4.3%。该方法灵敏度高、重复性好,可用于细菌中氨基酸的检测。     

固相萃取-高效液相色谱法测定水中BPA、NP和OP含量

采用国产新型D4020大孔吸附树脂自制固相萃取柱,研究了柱长、上样速度、样品溶液的pH、盐浓度等因素对壬基酚、辛基酚和双酚A吸附率的影响,确定了最佳固相萃取条件,建立了固相萃取-高效液相色谱测定水中痕量壬基酚、辛基酚和双酚A的分析方法.该法双酚A、壬基酚和辛基酚的检出限分别为0.432 μg/L、0.998 μg/L和1.336 μg/L,回收率为91%～96%,相对标准偏差(RSD)为1.5%～5.6%.方法简便快速、成本低廉,灵敏度高,准确度好,用于实际水样分析,取得满意结果.     

中空纤维膜液相微萃取-气相色谱质谱法测定水中的百菌清

研究了用中空纤维膜液相微萃取-气相色谱质谱法测定水中的百菌清。通过实验确定最佳萃取条件为:萃取剂为甲苯,萃取剂用量3μL,水样体积10mL,萃取温度为45℃,萃取时间为15 min,搅拌速率为500 r/min,萃取后取1μL有机溶剂直接进样进行气相色谱质谱分离检测。在此条件下,百菌清的富集倍数为450倍,方法的线性范围为5~600μg/L,检出限为0.5μg/L。测定实际水样的加标回收率在92.3%~96.0%之间。该方法可以用于水中百菌清的快速检测。     

中空纤维三相液相微萃取-高效液相色谱法测定水中的4种酚类化合物

建立了中空纤维液-液-液三相微萃取-高效液相色谱法测定水中4种酚类化合物的方法.实验系统地优化了影响萃取效率的因素(包括有机溶剂种类、接收相浓度、分散相pH值、加盐量、转速及萃取时间).得到的最佳萃取条件为:萃取剂为正辛醇,接收相NaOH溶液的浓度为0.09 mol/L,分散相的pH为4,萃取时间为40 min,搅拌速...     

中空纤维液相微萃取-气相色谱/质谱联用检测水中的氯化苄

建立了一种以中空纤维液相微萃取(HF-LPME)前处理样品,利用气相色谱/质谱(GC/MS)对水中痕量氯化苄进行检测的方法。优化的实验条件为:3.0μL甲苯为萃取溶剂,在中等搅拌速率下室温萃取15 min。方法的线性范围为1~100μg/L,线性相关系数r=0.9995;检出限为0.5μg/L(S/N=3);相对标准偏差为5.37%(n=5)。用于水库水和被污染河水的测定,加标回收率分别为95.7%和93.6%,结果满意。     

原位衍生分散液相微萃取-气相色谱/质谱快速检测饮用水中的痕量三氯生

建立了原位衍生分散液相微萃取-气相色谱/质谱检测饮用水中痕量三氯生的方法.将含有30.0 μL氯苯(萃取剂)和50.0 μL乙酸酐(衍生试剂)的0.5 mL丙酮(分散剂)作为萃取体系,快速注入到5.0 mL含有K2CO3(0.5%, m/V)的水溶液中.在5000 r/min下离心2 min后,得到(10±0.5) μL沉积相(氯苯),取底部沉积相1.0 μL进行气相色谱/质谱联用仪分析.方法的线性范围为0.05～50 μg/L(r=0.9994),检出限为0.01 μg/L;相对标准偏差2.0%(n=5).利用本方法检测了饮用水中的三氯生,平均加标回收率分别为92.1%和98.4%,结果满意.     

中空纤维膜液相微萃取-气相色谱/质谱法检测尿液中的苯丙胺类兴奋剂

建立了尿液中痕量苯丙胺类毒品的中空纤维膜液相微萃取-气相色谱/质谱检测方法。采用中空纤维膜液相微萃取技术萃取尿液中4种苯丙胺类毒品,研究萃取剂类型、体积、溶液pH、萃取时间和温度等对萃取效果的影响。尿液中4种苯丙胺类毒品的最佳萃取条件为:样品溶液pH 13,甲苯为萃取剂,搅拌速度500 r/min,30℃条件下萃取15 min;此条件下苯丙胺(AM)、甲基苯丙胺(MAM)、3,4-亚甲二氧基苯丙胺(MDA)、3,4-亚甲二氧基甲基苯丙胺(MDMA)的检出限(S/N=3)分别为1.0,0.75,1.0,0.64 ng/mL,相对标准偏差分别为6.62%,3.98%,4.57%,2.35%,富集倍数分别为155,170,132,218倍。本方法可用于尿液中痕量苯丙胺类毒品的分析测定。     

三相中空纤维式液相微萃取用于快速富集血浆中的尼古丁

建立了一种以三相中空纤维式液相微萃取(TP-HF-LPME)进行样品前处理,采用高效液相色谱快速、准确测定血浆中尼古丁含量的方法。研究表明该方法集萃取、富集、净化为一步,极大地简化了传统血浆成分测定的前处理过程,是一种快速、有效、绿色的前处理方法。方法的线性范围为0.1～50 mg/L,相关系数(r2)为0.9996,检测限为0.05 mg/L (信噪比为3),相对标准偏差小于5%。     

On‐line extraction and determination of two herbicides: Comparison between two modes of three‐phase hollow fiber microextraction

Two different modes of three‐phase hollow fiber liquid‐phase microextraction were studied for the extraction of two herbicides, bensulfuron‐methyl and linuron. In these two modes, the acceptor phases in the lumen of the hollow fiber were aqueous and organic solvents. The extraction and determination were performed using an automated hollow fiber microextraction instrument followed by high‐performance liquid chromatography. For both three‐phase hollow fiber liquid‐phase microextraction modes, the effect of the main parameters on the extraction efficiency were investigated and optimized by central composite design. Under optimal conditions, both modes showed good linearity and repeatability, but the three‐phase hollow fiber liquid‐phase microextraction based on two immiscible organic solvents has a better extraction efficiency and figures of merit. The calibration curves for three‐phase hollow fiber liquid‐phase microextraction with an organic acceptor phase were linear in the range of 0.3–200 and 0.1–150 μg/L and the limits of detection were 0.1 and 0.06 μg/L for bensulfuron‐methyl and linuron, respectively. For the conventional three‐phase hollow fiber liquid‐phase microextraction, the calibration curves were linear in the range of 3.0–250 and 15–400 μg/L and LODs were 1.0 and 5.0 μg/L for bensulfuron‐methyl and linuron, respectively. The real sample analysis was carried out by three‐phase hollow fiber liquid phase microextraction based on two immiscible organic solvents because of its more favorable characteristics.     

Hollow‐fiber‐supported liquid membrane microextraction of amlodipine and atorvastatin

A simple, environmentally friendly, and efficient method, based on hollow‐fiber‐supported liquid membrane microextraction, followed by high‐performance liquid chromatography has been developed for the extraction and determination of amlodipine (AML) and atorvastatin (ATO) in water and urine samples. The AML in two‐phase hollow‐fiber liquid microextraction is extracted from 24.0 mL of the aqueous sample into an organic phase with microliter volume located inside the pores and lumen of a polypropylene hollow fiber as acceptor phase, but the ATO in three‐phase hollow‐fiber liquid microextraction is extracted from aqueous donor phase to organic phase and then back‐extracted to the aqueous acceptor phase, which can be directly injected into the high‐performance liquid chromatograph for analysis. The preconcentration factors in a range of 34–135 were obtained under the optimum conditions. The calibration curves were linear (R² ≥ 0.990) in the concentration range of 2.0–200 μg/L for AML and 5.0–200 μg/L for ATO. The limits of detection for AML and ATO were 0.5 and 2.0 μg/L, respectively. Tap water and human urine samples were successfully analyzed for the existence of AML and ATO using the proposed methods.     

Ionic liquid based three-phase liquid-liquid-liquid solvent bar microextraction for the determination of phenols in seawater samples

For the first time, an ionic liquid based three-phase liquid-liquid-liquid solvent bar microextraction (IL-LLL-SBME) was developed for the analysis of phenols in seawater samples. The ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF(6)]), was used as the intermediary solvent for LLL-SBME, enhancing the extraction efficiency for polar analytes. In the procedure, the analytes were extracted from the aqueous sample into the ionic liquid intermediary and finally, back-extracted into an aqueous acceptor solution in the lumen of the hollow fiber. The porous polypropylene membrane acted as a filter to prevent potential interfering materials from being extracted, and no additional cleanup was required. After extraction, the acceptor solution could be directly injected into a high-performance liquid chromatographic system for analysis. Six phenols, 2-nitrophenol, 4-chlorophenol, 2,3-dichlorophenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol and pentachlorophenol were selected here as model compounds for developing and evaluating the method. The most influential extraction parameters were evaluated, including the ionic liquid, the composition of donor solution and acceptor solution, the extraction time and the extraction temperature, the effect of ionic strength, and the agitation speed. Under the most favorable extraction parameters, the method showed good linearity (from 0.05-50 to 0.5-50 μg/L, depending on the analytes) and repeatability of extractions (RSD below 8.3%, n=5). The proposed method was compared to conventional three-phase LLL-SBME and ionic liquid supported hollow fiber protected three-phase liquid-liquid-liquid microextraction, and showed higher extraction efficiency. The proposed method was demonstrated to be a simple, fast, and efficient method for the analysis of phenols from environmental water samples.     

Dynamic three-phase hollow fiber microextraction based on two immiscible organic solvents with automated movement of the acceptor phase

Dynamic three-phase hollow fiber liquid-liquid-liquid microextraction (HF-LLLME) based on two immiscible organic solvents, with automated movement of organic acceptor phase to facilitate mass transfer was introduced for the first time. Polycyclic aromatic hydrocarbons were used as model compounds and extracted from water and soil samples. The extraction involved filling an 8 cm length of hollow fiber with 25 μL of organic acceptor solvent using a microsyringe, followed by impregnation of the pores in the fiber wall with n-dodecane. The fiber was then immersed in 20 mL of aqueous sample solution. During extraction, the organic acceptor phase was repeatedly moved in the lumen of the hollow fiber by movement of the syringe plunger controlled by programmable syringe pump. Following this microextraction, 2 μL of organic acceptor phase was injected into gas chromatography-flame ionization detector. This new technique provided up to 554-fold preconcentration of the analytes under the optimized conditions. Good repeatabilities (with RSDs ≤8.4%) were obtained. Detection limits were in the range of 0.2-0.5 μg/L. The utilization of the proposed method for extraction of the polycyclic aromatic hydrocarbons from different real samples (such as water and soil samples) also gave good precision and recovery.     

Application of continual injection liquid‐phase microextraction method coupled with liquid chromatography to the analysis of organophosphorus pesticides

A liquid‐phase microextraction coupled with LC method has been developed for the determination of organophosphorus pesticides (methidation, quinalphos and profenofos) in drinking water samples. In this method, a small amount (3 μL) of isooctane as the acceptor phase was introduced continually to fill‐up the channel of a 1.5 cm polypropylene hollow fiber using a microsyringe while the hollow fiber was immersed in an aqueous donor solution. A portion of the acceptor phase (ca. 0.4 μL) was first introduced into the hollow fiber and additional amounts (ca. 0.2 μL) of the acceptor phase were introduced to replenish at intervals of 3 min until set end of extraction (40 min). After extraction, the acceptor phase was withdrawn and transferred into a 2 mL vial for a drying step prior to injection into a LC system. Parameters that affect the extraction efficiency were studied including the organic solvent, length of fiber, volume of acceptor and donor phase, stirring rate, extraction time, and effect of salting out. The proposed method provided good enrichment factors of up to 189.50, with RSD ranging from 0.10 to 0.29%, analyte recoveries of over 79.80% and good linearity ranging from 10.0 to 1.25 mg/L. The LOD ranged from 2.86 to 82.66 μg/L. This method was applied successfully to the determination of organophosphorus pesticides in selected drinking water samples.     

分散液-液微萃取/高效液相色谱法测定水样中的痕量双酚A

建立了分散液-液微萃取与高效液相色谱联用技术测定水样中痕量双酚A(BPA)的方法. 通过对实验条件的筛选及优化, 得到最佳条件: 22.5 μL氯苯作萃取剂、0.5 mL丙酮作分散剂、0 min静止萃取时间、调节pH 3.2左右、10%离子强度及9 mL水样体积. 此条件下方法的线性范围为0.5~100 μg/L(R2=0.9941), 检出限为0.10 μg/L. 在BPA质量浓度为1 μg/L条件下, 方法回收率为87.8%~111.0%, 相对标准偏差8.3%(n=5), 富集倍数范围1905~2527. 对添加不同BPA浓度的自来水、地表水及回用中水进行分析, 回收率分别为(108±11.1)%, (107±13.2)%及(81.2±6.2)%(n=3). 在既定的色谱条件下, BPA的测定不受乙炔基雌二醇、雌二醇、雌三醇、雌酮和壬基酚等雌激素的干扰.     

中空纤维支载离子液体液液微萃取法检测环境水体中的三氯生

三氯生(5 Chloro-2-(2,4-dichlorophenoxy) phenol,TCS)是一种新型环境水体污染物,具有潜在的生态与健康风险,因此发展合适的分析方法来检测水环境中这类化合物极其必要.本研究以1-辛基-3-甲基咪唑六氟磷酸离子液体( [C8 MIM][PF6])为萃取剂,基于中空纤维的离子液体液液微萃取方法,结合HPLC/UV用于环境水样中TCS的分析测定;通过对各参数(萃取剂、供体相的体积、供体相pH值、离子强度、萃取时间等)的优化在最优条件下(样品相体积为50 mL,pH值2,盐浓度为0.2 mol/L,200 r/min振荡萃取8 h),获得了较高的富集倍数(907倍)、较低的检出限(0.05 μg/L,RSD=7.4％,n=6)和较好的线性范围(0.1～100 μg/L);以4种环境水样加标实验对方法的准确性进行评估,其回收率可达94.2％～108.5％(RSD=5.5％～8.0％,n=6);本方法可广泛应用于环境水体中痕量TCS的分析检测.     

Determination of desipramine in biological samples using liquid–liquid–liquid microextraction combined with in‐syringe derivatization,gas chromatography,and nitrogen/phosphorus detection

A method was established for the determination of desipramine in biological samples using liquid–liquid–liquid microextraction followed by in‐syringe derivatization and gas chromatography–nitrogen phosphorus detection. The extraction method was based on the use of two immiscible organic solvents. n‐Dodecane was impregnated in the pores of the hollow fiber and methanol was placed inside the lumen of the fiber as the acceptor phase. Acetic anhydride was used as the reagent for the derivatization of the analyte inside the syringe barrel. Parameters that affect the extraction efficiency (composition of donor and acceptor phase, ionic strength, sample temperature, and extraction time) as well as derivatization efficiency (amount of acetic anhydride and reaction time and temperature) were investigated. The limit of detection was 0.02 μg/L with intra and interday RSDs of 2.6 and 7.7%, respectively. The linearity of the method was in the range of 0.2–20 μg/L (r² = 0.9986). The method was successfully applied to determine desipramine in human plasma and urine.     

中空纤维膜液相微萃取-高效液相色谱法测定醋酸氯己定痔疮栓中的醋酸氯己定

建立了中空纤维膜液相微萃取-高效液相色谱（HPLC）测定醋酸氯己定痔疮栓中醋酸氯己定含量的方法。将样品用醋酸水溶液萃取5次,配成样品溶液,然后用装有正辛醇的中空纤维膜进行液相微萃取,萃取液用高效液相色谱测定。醋酸氯己定的质量浓度为0.5 ～ 16 mg/L时与其峰面积呈良好的线性关系,加样回收率大于98.0%,相对标准偏差低于4.0%。该方法样品处理简单、快速,灵敏度与不经过液相微萃取的HPLC方法相比提高了约24倍,醋酸氯己定痔疮栓中的其他物质对测定无干扰。