氨水溶液制备ZnO纳米晶阵列的研究

以氨水和硝酸锌为前躯体，采用低温水溶液法在涂敷ZnO晶种层的玻璃衬底上外延生长了ZnO纳米棒晶阵列。应用SEM、TEM、SAED和XRD表征了ZnO纳米晶的形貌和结构。讨论了该组成体系水溶液法纳米棒外延生长的机理及其对棒晶形貌的影响。通过对水溶液pH值的原位二次调整，制备出了ZnO纳米管和表面绒毛状的棒晶阵列，基于生长机理探讨了它们的形成原因，为实现不同形貌ZnO纳米晶阵列的优化控制提供了可能的技术途径。结果表明，不同形貌的ZnO均属沿c轴择优取向的六方纤锌矿结构。     

基底对电沉积制备ZnO纳米棒阵列的影响

采用恒电位电沉积方法, 在未经修饰的ITO导电玻璃基底上通过控制实验条件制备出不同形貌的纳米ZnO结构, 而在经过ZnO纳米粒子膜修饰后的ITO导电玻璃基底上, 制备出透明、高取向、粒径小于30 nm的ZnO纳米棒阵列. 用扫描电子显微镜(SEM)、X射线衍射(XRD)以及透射光谱对制备出的ZnO纳米棒阵列的结构、形貌和透明性进行了表征. 测试结果表明, ZnO纳米棒阵列的平均直径为21 nm, 粒径分布窄, 约18～25 nm, 择优生长取向为[001]方向, 垂直于基底生长. 当入射光波长大于400 nm时, ZnO纳米棒阵列的透光率大于95%.     

海藻酸锌纤维热降解法制备氧化锌纳米结构

采用天然高分子海藻酸钠为原料, 以氯化锌水溶液为凝固浴, 通过湿法纺丝技术成功制备了海藻酸锌(Alg-Zn)纤维.通过在空气中不同温度下对所得海藻酸锌纤维进行热处理, 得到了多种ZnO纳米结构. 利用热失重分析(TG)、X射线衍射(XRD)、电子能量损失谱(EELS)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和高分辨透射电子显微镜(HRTEM)等手段对产物的组成、形貌和微观结构进行了详细表征. 结果表明, 焙烧温度和时间对所得ZnO纳米结构的尺寸和形貌具有重要影响; 800 ℃下热处理24 h以上可以得到直径约为120 nm的ZnO纳米棒. 通过仔细考察不同热处理时间得到的ZnO纳米结构, 提出了在焙烧条件下ZnO纳米棒的生长机理.     

籽晶层制备方式对氧化锌纳米棒阵列的影响

采用3种不同的方式制备ZnO薄膜籽晶层:旋涂、喷雾热解和脉冲激光沉积。对于每一种制备方式,其薄膜的晶体结构、形貌、表面粗糙度等性能分别用X射线衍射(XRD)、扫描电子显微镜(SEM)和原子力显微镜(AFM)进行了表征。之后,通过水热合成方法,在3种籽晶层衬底上制备得到具有不同结构和形貌特征的ZnO纳米棒阵列。结果表明,ZnO纳米棒生长和籽晶层制备方式具有极强的相关性。最后,对两者相关性的生长机理进行了解释。     

水热法生长方式对ZnO纳米棒阵列结构和性能的影响

本文系统地比较了三种方式制备的ZnO纳米棒阵列的结构和性能的异同.根据水热法生长液中碱来源的不同,ZnO纳米棒阵列的生长方式分为三种:N方式(氨水)、H方式(六次甲基四胺)和NH方式(两次N方式和一次H方式).通过扫描电子显微镜,对这三种方式生长的ZnO纳米棒阵列形貌进行了表征.此外,利用X射线衍射仪、透射电子显微镜和激光拉曼光谱对ZnO的结晶性能进行比较.结果表明,ZnO纳米棒阵列的取向性N≈NH>H,ZnO的晶体质量H>NH>N.NH方式综合N方式和H方式的优势,得到了取向性和晶体质量优良的ZnO纳米棒阵列.这将为在进一步应用中有效地选择ZnO纳米棒阵列的制备方式提供重要信息.     

微波诱导燃烧法合成类花状ZnO纳米材料及其晶体结构、荧光性质研究

以硝酸锌[Zn(NO3)2.6H2O]和尿素[CO(NH2)2]作前驱体,通过微波诱导燃烧技术可控合成具有不同形貌的ZnO纳米晶体,并用热重分析和差热分析进行了研究。对各种生长条件:微波功率,辐射时间和尿素/Zn2+物质的量的比对ZnO纳米晶体形貌的影响作了分析。结果表明:尿素/Zn2+物质的量的比对ZnO纳米材料的形貌具有显著影响。X衍射图表明合成的ZnO纳米结构呈六角形。傅里叶变换红外光谱图中400~500 cm-1处明显的峰为Zn-O的振动峰。ZnO纳米结构的发光光谱在366 nm的带边发射,因缺陷又由许多可见光发射峰组成。用扫描电子显微镜、透射电子显微镜、选区电子衍射研究了花状ZnO纳米结构的增长机理。本方法仅需几分钟就获得的了ZnO纳米结构。     

一维有序ZnO纳米棒阵列的制备和优化

以氧化铟锡透明导电膜玻璃(ITO)做载体,先在室温下采用浸渍-提拉法制备出ZnO纳米晶作为种子层,再结合低成本的水热生长法合成了一维有序的ZnO纳米棒阵列.结合X射线衍射(XRD)、扫描电子显微镜(SEM)和能量色散谱仪(EDS)表征,研究了前驱液浓度、溶胶陈化时间、种子层提拉次数、水热生长时间和次数等5种因素对ZnO纳米棒的结构及形貌的影响.研究结果表明, ZnO纳米棒阵列的长度和直径会随着前驱液的浓度和溶胶陈化时间以及水热生长时间的延长而增加.当前驱液浓度为0.5 mol·L^-1时,陈化时间为24 h,浸渍-提拉3次,水热反应3次,每次反应时间为150 min时,可得到一维有序的ZnO纳米棒阵列.     

熔盐分解制备氧化锌纳米晶

以新制的乙酰丙酮合锌为前驱体,添加NaCl助剂,在650℃熔盐分解制得了六棱柱形结构的ZnO纳米晶.用X-射线衍射分析(XRD)、能量色散X射线分析(EDX)和场发射扫描电子显微镜(FFSEM)对粉体进行了表征.结果表明,ZnO为六棱柱形纳米晶,属六方纤锌矿结构,结晶性好,平均长度约90nm,平均直径约60nm,长径比约为1.5:1.通过与不添加NaCl的对比试验,简单探讨了六棱柱形ZnO纳米晶的生长过程.     

纳米TiO_2-ZnO二元负载木材的制备及性质

采用两步法将TiO_2/ZnO纳米材料与杨木试样复合,制备了纳米二元负载木材.通过X射线衍射(XRD)、傅里叶变换红外光谱(FTIR)和扫描电子显微镜(SEM)对样品的结构和形貌进行了表征,并探讨了不同处理条件下得到的纳米氧化物负载木材及非纳米氧化物负载木材的抗菌性和耐候性.结果表明,氧化锌和二氧化钛二元协同负载木材的抗菌性和耐候性均优于单一纳米晶处理的木材;在溶剂热反应中以正己烷作为溶剂所制备样品的性能优于以水和无水乙醇为溶剂制备的样品;并且纳米结构负载木材的抗菌性和耐候性优于非纳米结构负载的木材.     

溶剂热法合成锐钛矿型二氧化钛纳米晶的形状演化规律

以钛酸四丁酯为前驱体,乙醇为溶剂,月桂酸和十二胺为共同稳定剂,采用溶剂热法制备了不同形状的锐钛矿型二氧化钛纳米晶。利用透射电子显微镜(TEM)、选区电子衍射(SAED)、X射线衍射(XRD)、傅里叶变换红外(FTIR)光谱和热失重-差热分析(TG-DTA)等技术对纳米晶的结构、尺寸、形貌及形状进行了系统的表征,并探讨了月桂酸与十二胺不同配比时纳米晶的形状演化规律。结果表明:用溶剂热法在不同配比情况下获得的二氧化钛均为锐钛矿相;在月桂酸与十二胺总摩尔量不变的情况下,随着十二胺含量的增加,二氧化钛纳米晶的形状由球形逐渐演化为棒状,且结晶化程度在两者摩尔比为1:1时最好;月桂酸与十二胺稳定剂与纳米晶内核之间以桥接配位体的形式结合,且稳定剂在样品中的含量约为5%。     

Co-templating synthesis of highly dispersed 1D ZnO nanostructures in amorphous SiO2 under hydrothermal condition

One-dimensional (1D) ZnO nanostructures were grown in amorphous SiO₂ matrix by a co-templating method under hydrothermal condition. Using ethylenediamine (EDA) groups grafted mesoporous silica MCM-41 as a co-template, the growth of 1D ZnO nanostructures was oriented by soft EDA groups and confined inside the hard mesochannels of MCM-41. The microstructure and morphology of the 1D-ZnO-nanostructures/SiO₂ composite were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and X-ray energy dispersive spectroscopy (EDS). All these results indicate that the 1D ZnO nanostructures were synthesized and highly dispersed in the amorphous SiO₂ matrix. Blue-shifted exciton absorption was observed from the co-templating synthesized sample.     

Site-specific nucleation and growth kinetics in hierarchical nanosyntheses of branched ZnO crystallites

Here we report a site-specific sequential nucleation and growth route to the systematic building of hierarchical, complex, and oriented ZnO micro/nanostructures in solution nanosynthesis. Structures and morphologies of the products were confirmed by results from X-ray diffraction and scanning electron microscopy studies. The organic structure-directing agents (SDAs), diaminopropane and citrate, are found to play different roles in controlling the evolution of these new morphologies. Through the selective adsorptions of SDAs on different crystal facets of the primary ZnO rods, we have alternated the hierarchical growth of secondary and tertiary new complex nanostructures. Roles of the SDA concentration, nucleation time, and growth kinetics in the solution hierarchical ZnO nanosyntheses have all been systematically investigated.     

Chemical stability of ZnO nanostructures in simulated physiological environments and its application in determining polar directions

The in vitro chemical stability and etching of ZnO nanostructures in simulated physiological solution (SPS) were studied using electron microscopy. Calcium hydrogen phosphate thin layers were observed to be uniformly deposited on the surfaces of ZnO nanomaterials in SPS. Electron diffraction and high-resolution transmission electron microscopy revealed that the calcium hydrogen phosphate layers were amorphous and had excellent interfacial contact with the nanocrystals. ZnO nanostructures fabricated by thermal evaporation were found to survive much longer in SPS than those fabricated using a hydrothermal solution method. The shapes of the voids formed in the ZnO nanostructures by the etching in SPS can be used to deduce the polar directions of ZnO nanostructures.     

Time growing comparison for ZnO nanorod by using microwave irradiation method

In this study, zinc oxide (ZnO) nanorod were successfully prepared at different growth times (15, 30 and 60 min) using the microwave irradiation method. The ZnO nanorods were simply synthesized at a low temperature (90 °C) with low power microwave assisted heating (about 100 W) and a subsequent ageing process. The synthesized nanorod were characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX) and Ultraviolet–Visible spectroscopy (UV–Vis). The FESEM images showed nanorods with diameter ranging between 50 and 150 nm, and length of 150–550 nm. The XRD results indicate that ZnO nanorods of different time of growth exhibits pure wurtzite structure with lattice parameters of 3.2568 and 5.2125 Å. UV–Vis characterization showed that energy gap decreases with increase in time. The result also shows that growth of ZnO at 60 min produces an energy band gap of 3.15 eV. In general, the results of the study confirm that the microwave irradiation method is a promising low temperature, cheap and fast method for the production of ZnO nanostructures.     

酸碱度调控氧化锌纳米材料形貌及其光催化还原CO2研究

利用水热法合成了形貌可控的氧化锌(ZnO)微纳材料。利用X射线衍射(XRD),扫描电子显微镜(SEM),透射电子显微镜(TEM),紫外-可见(UV-Vis)分光光谱和比表面积分析(BET)等技术对所制备的ZnO材料进行了表征。不同酸碱度(pH值)条件下,经过500 ℃退火2 h制备的ZnO均为纤锌矿结构。随着前驱液pH值的增加,所得ZnO从片状晶体变为棒状晶体。片状ZnO主要暴露极性晶面,棒状ZnO主要暴露非极性晶面。从生长角度考虑,在溶液为弱酸性条件下(pH 6.5),溶液中游离的氯离子(Cl^-)抑制了ZnO在锌极性面({Zn²⁺}_{crystal surface})的生长,水热反应产物为片状Zn₅(OH)₈Cl₂·H₂O,退火后得到微孔片状ZnO;当溶液中添加氢氧根(OH^-)后,锌离子(Zn²⁺)被络合为四羟基锌络合离子(Zn(OH)₄^2-),该络离子促进了ZnO在{Zn²⁺}_{crystal surface}的生长,从而得到棒状晶体。利用上述催化剂,在氙灯照射下进行光催化还原二氧化碳实验,发现极性面较多的片状ZnO具有更高的光催化性能。     

Synthesis and synchrotron light-induced luminescence of ZnO nanostructures: nanowires, nanoneedles, nanoflowers, and tubular whiskers

ZnO nanostructures, including single-crystal nanowires, nanoneedles, nanoflowers, and tubular whiskers, have been fabricated at a modestly low temperature of 550 degrees C via the oxidation of metallic Zn powder without a metal catalyst. Specific ZnO nanostructures can be obtained at a specific temperature zone in the furnace depending on the temperature and the pressure of oxygen. Scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), and X-ray diffraction (XRD) studies show that ZnO nanostructures thus prepared are single crystals with a wurtzite structure. X-ray excited optical luminescence (XEOL) from the ZnO nanostructures show noticeable morphology-dependent luminescence. Specifically, ZnO nanowires of around 15 nm in diameter emit the strongest green light. The morphology of these nanostructures, their XEOL, and the implication of the results will be discussed.     

Morphology-controlled synthesis of ZnO nanostructures by a simple round-to-round metal vapor deposition route

One-dimensional ZnO nanostructures with different morphologies have been successfully synthesized through a simple round-to-round metal vapor deposition route at 550 degrees C with a zinc powder covered indium film as the source material. The structures and morphologies of the products were characterized in detail by using X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. Studies found that the morphology of the products can be easily tuned from one experimental round to another. Possible growth mechanisms for the formation of one-dimensional ZnO nanostructures with different morphologies are discussed. Photoluminescence studies show that there are sharp UV emission and broad defect-related green emissions for the products obtained in all experimental rounds. Relative intensity of the UV emission to defect-related emissions gradually increased from one experimental round to another.     

Controlling the morphology of ZnO nanostructures in a low-temperature hydrothermal process

ZnO nanostructures of different morphologies were grown in a controlled manner using a simple low-temperature hydrothermal technique. Controlling the content of ethylenediamine (soft surfactant) and the pH of the reaction mixture, nanoparticles, nanorods, and flowerlike ZnO structures could be synthesized at temperatures 80-100 degrees C with excellent reproducibility. High-resolution electron microscopy revealed the well crystalline nature of all the nanostructures with preferential growth along the [002] direction for linear structures. Photoluminescence spectra of the as-grown nanostructures revealed oxygen-vacancy-related defects in them, which could be reduced by air annealing at 250 degrees C. Possible mechanisms for the variation of morphology with synthesis parameters are discussed.