氧化物气凝胶高温红外改性研究

氧化物气凝胶是一类具有超低热导率的新型纳米多孔材料,在航空航天等高温隔热领域具有广阔的应用前景。然而目前常见的氧化硅、氧化铝等氧化物气凝胶受材料/结构单元固有性质的限制,其通常具有红外透明性,而高温下辐射传热占据主导地位,大量红外辐射会透过气凝胶,热导率急剧攀升,导致其高温隔热性能较差,因此需要对其进行高温红外改性,从而满足更高的隔热性能需求。本文综述了近年来添加遮光剂、纤维及调整气凝胶的结构/形貌在提高氧化物气凝胶高温隔热性能方面的研究进展,并对未来研究方向进行展望。     

常压干燥制备二氧化硅气凝胶*

二氧化硅气凝胶是典型的纳米多孔轻质材料,由于具有独特的性能并在许多领域存在潜在的应用价值而受到广泛关注。二氧化硅气凝胶的制备传统上采用超临界干燥工艺,但此工艺成本高、工艺复杂而且具有一定的危险性。为了实现二氧化硅气凝胶的大批量生产和商品化应用,研究低成本常压干燥制备技术非常必要。目前常压干燥制备工艺已取得了较大进展,本文主要介绍了二氧化硅气凝胶的常压干燥制备方法及其特点,并概述了二氧化硅气凝胶复合材料制备的最新研究进展。以纤维和聚和物为增强体的二氧化硅气凝胶复合材料改善了气凝胶的力学性能,进一步扩宽了其应用范围。     

气凝胶微球的制备和应用

与传统的块状气凝胶不同,气凝胶微球是一种具有独特结构的新材料。它既由纳米级材料构建,又有微米级尺寸,同时还具备气凝胶特有的热、声、光、电性质和复杂的三维网络拓扑结构,在生物医药、环境修复、功能性载体、能源存储和转化等领域具有广泛的应用潜力。近年来,国内外关于气凝胶微球的研究进展迅速,但关于气凝胶微球的综述还没有报道。本文结合气凝胶微球领域最新的研究进展,从气凝胶微球的制备方法、种类以及不同种类的气凝胶微球在环境、医药、能源领域的应用等方面进行了综述。     

常压干燥法制备气凝胶的研究进展

气凝胶是一类轻质、低密度的三维纳米多孔固态材料,因其独特的高孔隙率、高比表面积和低导热系数等特性,使其在吸附、催化、保温隔热和隔音等诸多领域具有广泛的用途,目前其相关研究在材料科学领域受到了广泛的关注。气凝胶的制备主要包括溶胶-凝胶过程和湿凝胶干燥两个步骤,湿凝胶的干燥是制备气凝胶过程中至关重要而又较为困难的一步。传统的气凝胶通过超临界干燥制备,工艺复杂、成本高,而且由于干燥过程在高温高压条件下进行,有一定的危险性并且不适宜大规模生产,因此如何通过常压干燥获得高比表面积、高孔隙率、低密度的性能优异的气凝胶是其研究的重要方向之一。本文简要介绍了湿凝胶的制备以及凝胶干燥理论,详细介绍了近年来常压干燥方法气凝胶制备的研究进展,并对其未来发展前景做出了展望。     

气凝胶材料的研究进展及其在航空航天领域的应用

气凝胶材料是由聚合物分子链或纳米粒子组成的一种三维纳米骨架结构的多孔材料,它具有低密度、高孔体积、高孔隙率和大比表面积等结构特点,表现出优异的光、热、声、电和力学等特性.气凝胶这种轻质材料能够很好地代替金属材料,在隔热保温、电磁屏蔽、能量储存和基体骨架等航空航天领域具有广泛的应用前景.本文介绍了气凝胶最新研究进展及其在...     

超低密度气凝胶的制备及应用

超低密度气凝胶是一类具有超轻质特性的多孔固体材料,较常规气凝胶具有更高的孔隙率与更为多样化的表面特性,其独特的物理与化学性质使其作为新型纳米多孔材料在诸多新兴领域得到了重要应用。在制备过程中保留超低密度气凝胶高度发达的三维孔隙结构,以及在实际应用中发挥超低密度气凝胶独特的功能特性是气凝胶领域近年来的研究重点之一。本文按照超低密度气凝胶的主要类型综述了该材料制备技术的最新研究进展,探讨了其在空间探测、阻燃隔热、储能、吸附、催化以及传感领域的应用方式;通过分析目前研究中存在的主要问题,对未来的发展方向,如突破常压干燥制备技术、开展各类复合气凝胶或结构有序可控的超低密度气凝胶的制备、系统性地研究超轻质特性对气凝胶特定功能的影响规律等进行了展望。     

自生纳米纤维增强SiO_2气凝胶的制备及性能研究

采用溶胶-凝胶法和乙醇超临界干燥工艺制备ZrOX/SiO2复合气凝胶,再经1 200℃高温热处理得到自生纳米纤维增强SiO2复合气凝胶。利用扫描电子显微镜、透射电子显微镜、X射线衍射、热重和氮气吸附等手段对气凝胶的结构和性能进行了分析,并且测试了样品的压缩强度及真密度。实验结果表明:自生纳米纤维增强SiO2复合气凝胶具有均匀的多孔网络结构,锆氧纳米纤维是以化学键连接复合的方式无序穿插在气凝胶中,对复合气凝胶的机械强度和隔热性能有明显的改善。经1 200℃热处理后的ZrOX/SiO2复合气凝胶比表面积为827.22 m2·g-1,压缩强度为9.68 MPa,真密度为0.23 g·cm-3。     

片状镍粉填充树脂基和石蜡基复合材料的微波电磁特性

以微米镍粉作为原料,采用湿法研磨法制备了片状镍粉,将其作为填料用于制备树脂基导电复合材料和石蜡基复合材料;测定了树脂基复合材料的电磁屏蔽性能与镍粉含量的关系,同时考察了片状镍粉/石蜡复合材料的吸波性能.结果表明,复合材料电磁屏蔽性能(SE)随着填料含量的增加而提高;厚度为5 mm的片状镍粉/石蜡复合材料在2 GHz附近的最小反射率可达-27 dB.这表明所制备的片状镍粉在电磁屏蔽及吸波领域具有很好的应用前景.     

有机-无机复合气凝胶研究进展

气凝胶具有低密度、低热导率、高比表面积及高孔隙率等优异性能,在隔热、传感、催化、吸附、储能等领域显示出良好的应用前景。但气凝胶的多孔网络结构也造成了其强度低和韧性差等问题,严重制约了气凝胶的实际应用,有机-无机复合是一种增强气凝胶力学性能的有效方法。而且,采用有机-无机复合方法制备气凝胶还可以赋予气凝胶阻燃等其他新颖的性能。本文综述了有机-无机复合气凝胶的新研究进展,分析其原理、合成方法及相关性能,指出了有机无机复合气凝胶的优势和存在问题并展望了未来的发展方向。     

高比表面碳化硅制备及其作为催化剂载体的应用

介绍了模板法、溶胶-凝胶法以及聚碳硅烷裂解法制备高比表面积碳化硅的主要过程和结果, 并介绍了碳化硅作为催化剂载体在多相催化中应用的研究进展. 对碳化硅在多相催化中的应用前景进行了展望.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.