表面修饰中空LaF3纳米微粒的制备及其摩擦学性能

在油酸钠/十六烷基溴化铵乳液体系中合成了表面修饰中空LaF3纳米微粒. 通过透射电子显微镜(TEM)、X射线衍射(XRD)、傅立叶变换红外光谱(FTIR)、热重分析(TG-DTG)、能谱分析(EDS)等测试手段对其结构和形貌进行了表征. 同时在四球摩擦磨损试验机上考察了LaF3纳米微粒作为润滑油添加剂时, 添加浓度和施加载荷对其抗磨减摩性能的影响. 结果表明, 此纳米微粒的表面为油酸修饰, 具有中空结构, 平均粒径约17.5 nm; 表面修饰中空油酸/三氟化镧纳米微粒作为成品润滑油的添加剂, 具有良好的抗磨性能. 另外, 对中空纳米微粒的形成机理进行了分析.     

表面修饰中空LaF3纳米微粒的制备及其摩擦学性能

在油酸钠,十六烷基溴化铵乳液体系中合成了表面修饰中空LaF3纳米微粒.通过透射电子显微镜(TEM)、X射线衍射(XRD)、傅立叶变换红外光谱(FTIR)、热重分析(TG-DTG)、能谱分析(EDS)等测试手段对其结构和形貌进行了表征.同时在四球摩擦磨损试验机上考察了LaF3纳米微粒作为润滑油添加剂时,添加浓度和施加载荷对其执磨减摩性能的影响.结果表明,此纳米微粒的表面为油酸修饰,具有中空结构,平均粒径约17.5nm;表面修饰中空油酸/三氟化镧纳米微粒作为成品润滑油的添加剂,具有良好的抗磨性能.另外,对中空纳米微粒的形机理进行了分析.     

季铵盐修饰磷钼酸铵纳米微粒的制备、结构表征及摩擦学性能

在醇 -水体系中采用同阴离子共沉淀法制备了季铵盐修饰的 (NH4 ) 3PMo12 O4 0 纳米微粒 ,采用TEM ,XRD ,FTIR ,TGA&DSC等多种分析手段表征了这种纳米微粒的形貌和结构 ,在四球试验机上考察了它们的摩擦学性能。结果表明所合成的杂多化合物具有Keggin骨架结构 ,微粒粒径约 2 0nm ,在有机溶剂中可良好分散 ,作为一类新型润滑油添加剂 ,具有良好的抗磨性能。     

聚苯乙烯/Ag核壳结构纳米微粒的制备及表征

用种子乳液聚合法合成了聚苯乙烯（PS）/Ag复合纳米粒子,进一步利用分步聚合技术实现了聚甲基丙烯酸甲酯(PMMA)在微球表面功能化,分别用TEM、XRD、TG-DTA及FT-IR对其结构和形貌进行了表征,并考察了其摩擦学性能.结果表明,在所选择的实验条件下,合成了以Ag纳米微粒为核,PS、PMMA为壳层的核壳结构复合纳米微球,其中Ag纳米核平均粒径约12 nm,复合微球粒径约25 nm,颗粒较均匀并且在有机溶剂中有良好的分散性,作为润滑油添加剂,具有良好的抗磨性能.     

表面修饰LaF_3纳米微粒的制备及表征

在水醇混合介质中采用同阳离子共沉淀表面修饰法制备了有机化合物表面修饰的LaF3纳米微粒 ,研究了它的摩擦学特性。采用多种分析手段表征了表面修饰LaF3纳米微粒的结构 ,并在四球摩擦试验机上考察其润滑性能。结果表明 ,表面修饰LaF3纳米微粒不仅在有机溶剂中具有良好的分散性 ,同时也显示出良好的减摩、抗磨和承载性能。     

表面修饰ZrO_2纳米微粒的结构表征及摩擦学行为研究(英文)

采用XPS,FTIR,DSC,TGA等多种现代分析手段表征了硬脂酸修饰ZrO2 纳米微粒的结构.在四球摩擦磨损试验机上,首次评价了表面修饰ZrO2 纳米微粒用作润滑油添加剂的摩擦学性能,结果表明ZrO2 纳米微粒具有良好的抗磨减摩性     

单分散双相可溶四氧化三铁纳米微粒的多醇法制备及磁性

以具有生物相容性的三嵌段共聚物聚氧乙烯-聚氧丙烯-聚氧乙烯为表面活性剂,利用多醇合成法制备了Fe3O4纳米微粒;采用X射线粉末衍射仪、傅立叶变换红外光谱仪及透射电子显微镜分析了Fe3O4纳米微粒的晶体结构、化学结构及显微结构,采用振动样品磁强计测定了其磁性能.结果表明,所制得的Fe3O4磁性纳米微粒结晶度高,在室温下显示近似超顺磁性.采用Langevin方程对Fe3O4纳米微粒的磁滞回线进行拟合,结果显示其为磁性单畴.此外,Fe3O4磁性纳米微粒在无机和有机溶剂中均具有很好的分散性,显示出广阔的应用前景.     

微波加热制备PS/SiO2复合纳米微球及其摩擦性能研究

用微波加热法合成了表面功能化的聚苯乙烯／SiO2复合纳米粒子,分别用FTIR、TEM及TGDTA对其结构和形貌进行了表征,并考察了其摩擦学性能。结果表明,微波辐射能使反应时间大大缩短。在所选择的实验条件下,可制备出以SiO2纳米微粒为核,PMMA、PS为壳层的核壳结构复合纳米微球,微球粒径约15nm,颗粒较均匀,并且在有机溶剂中有良好的分散性,作为润滑油添加剂,具有良好的抗磨性能。     

CdS/TiO2复合纳米微粒的原位合成及性质研究

采用一种新方法,在TiO₂表面原位合成CdS纳米微粒,并用红外光谱跟踪了CdS/TiO₂复合纳米微粒的形成过程.紫外吸收光谱研究表明TiO₂对CdS纳米微粒的形成有很好的稳定作用,荧光光谱研究结果表明,这种纳米异质结构有着良好的电荷分离.     

表面引发原子转移自由基聚合方法合成Fe3O4/PMMA复合纳米微粒

采用表面引发原子转移自由基聚合方法合成了核壳结构的磁性高分子纳米微粒. 作为聚合反应引发剂的3-氯丙酸, 首先与油酸修饰的Fe3O4纳米微粒表面的部分油酸置换, 然后在Fe3O4纳米微粒表面引发甲基丙烯酸甲酯聚合, 合成的纳米复合材料用TEM, FTIR, XRD和DSC表征. 磁性测试结果表明, 所制备的磁性高分子纳米微粒仍具有超顺磁性, 但由于聚合物的存在, 其饱和磁化强度降低.     

纳米(NH4)3PMo6W6O40的室温固相合成及形成机理

以H3PMo6W6O40•23H2O和(NH4)2C2O4•H2O为原料，采用室温固相反应合成出(NH4)3PMo6W6O40•6H2O产物，用元素分析、IR、UV-Vis、XRD、TEM、TG-DTA、BET等手段确定其组成、结构和性能.结果表明，产物为纳米粒子，平均粒径为10 nm.纳米粒子保持着杂多阴离子的Keggin特征结构，比表面积为167.6 m2•g－1，且在465 ℃以下具有良好的热稳定性.反应中反应热能、结晶水和生成物H2C2O4•2H2O对形成小粒径的(NH4)3PMo6W6O40纳米粒子起关键作用.     

尿素与Keggin结构磷钼酸电荷转移盐的合成与表征

在水中合成了两种新的有机 金属氧酸盐电荷转移配合物H3 PMo12 O4 0 ·4.5CO(NH2 ) 2 ·2 .5H2 O和H3 PMo12O4 0 ·12CO (NH2 ) 2 ,用IR、UV、TG、XRD及元素分析对其进行了表征。结果表明两种化合物中均存在[(H2 N) 2 COH]+ ,阴离子保持Keggin结构 ,但Keggin结构由于尿素的有机给体作用发生了不同程度的畸变。H3 PMo12 O4 0 ·4.5CO(NH2 ) 2 ·2 .5H2 O在固态 ,H3 PMo12 O4 0 ·12CO(NH2 ) 2 的水溶液具有光致变色效应     

杂多酸水溶液脱除烟气中SO2新方法的研究

在孔板式吸收器（孔板孔径：50μm-70μm）中对杂酸水溶液脱除烟气中SO2的新方法进行了研究。在所考察的几种杂多酸中,H3PW12O40和H2SiW12O40对SO2的脱除率较为接近,H7PMo2W12O49和Na2HPMo12O40对SO2的脱除率相对较高,其中后者对SO2的脱除率最高。杂多酸（HPA）对SO2的脱除率随HPA浓度的提高而增高,随进气中SO2的浓度或吸收温度提高而减低。常温有利于HPA对SO2的脱除。NaCl,NH4VO3,CuSO4及H3PO4这四种添加剂均能提高HPA对SO2的脱除率。复配体系中,以上添加剂对HPA的最优配比为：NaCl/HPA:H3PO4/HPA:NH4VO3/HPA:CuSO4/HPA=1/6:1/8:1/2:1/4。进气中有NOx存在下HPA对SO2的脱除反应式,这些反应式能够很好地说明NOx的作用效果。以上结果表明：HPA水溶液具有很好的烟气脱硫应用前景。     

PtRu catalysts supported on heteropolyacid and chitosan functionalized carbon nanotubes for methanol oxidation reaction of fuel cells

A simple self-assembly approach has been developed to functionalize carbon nanotubes (CNTs) with chitosan (CS) and heteropolyacids (HPAs) of phosphomolybdic acid (H(3)PMo(12)O(40), HPMo) and phosphotungstic acid (H(3)PW(12)O(40), HPW). The non-covalent functionalization method, which introduces homogenous surface functional groups with no detrimental effect on graphene structures of CNTs, can be carried out at room temperature without the use of corrosive acids. The PtRu nanoparticles supported on HPAs-CS-CNTs have a uniform distribution and much smaller size as compared to those of the PtRu nanoparticles supported on conventional acid treated CNTs (PtRu/AO-CNTs). The onset and peak potentials for CO(ad) oxidation on PtRu/HPAs-CS-CNTs catalysts are more negative than those on PtRu/AO-CNTs, indicating that HPAs facilitate the electro-oxidation of CO. The PtRu/HPMo-CS-CNTs catalyst has a higher electrocatalytic activity for methanol oxidation and higher tolerance toward CO poisoning than PtRu/HPW-CS-CNTs. The better electrocatalytic enhancement of HPMo on the PtRu/HPAs-CS-CNTs catalyst is most likely related to the fact that molybdenum-containing HPAs such as HPMo have more labile terminal oxygen to provide additional active oxygen sites while accelerating the CO and methanol oxidation in a similar way to that of Ru in the PtRu binary alloy system.     

Tetravalent metal complexation by Keggin and lacunary phosphomolybdate anions

We report the synthesis, spectroscopic and structural characterization, and computational analysis of a series of phosphomolybdate complexes with tetravalent metal cations. The reaction between Ce (IV) and Th (IV) with phosphomolybdate at the optimum pH for the stabilization of the lacunary heteropolyoxometalate anion, [PMo 11O 39] (7-), results in the formation of compounds containing the anions [Ce(PMo 11O 39) 2] (10-) and [Th(PMo 11O 39) 2] (10-), respectively. Single crystal X-ray diffraction analysis was performed on salts of both species, Cs 10[Ce(PMo 11O 39) 2].20H 2O and (NH 4) 10[Th(PMo 11O 39) 2].22H 2O. In both anionic complexes the f-block metal cation is coordinated to the four unsaturated terminal lacunary site oxygens of each [PMo 11O 39] (7-) anion, yielding 8 coordinate sandwich complexes, analogous to previously prepared related complexes. Spectroscopic characterization points to the stability of these complexes in solution over a reasonably wide pH range. Density functional analysis suggests that the Ce-O bond strength in [Ce(PMo 11O 39) 2] (10-) is greater than the Th-O bond strength in [Th(PMo 11O 39) 2] (10-), with the dominant bonding interaction being ionic in both cases. In contrast, under similar reaction conditions, the dominant solid state Zr (IV) and Hf (IV) complexes formed contain the anions [Zr(PMo 12O 40)(PMo 11O 39)] (6-) and [Hf(PMo 12O 40)(PMo 11O 39)] (6-), respectively. In these complexes the central Group 4 d-block metal cations are coordinated to the four unsaturated terminal lacunary site oxygens of the [PMo 11O 39] (7-) ligand and to four bridging oxygens of a plenary Keggin anion, [PMo 12O 40] (3-). In addition, (NH 4) 5{Hf[PMo 12O 40][(NH 4)PMo 11O 39]}.23.5H 2O can be crystallized as a minor product. The structure of the anion, {Hf[PMo 12O 40][(NH 4)PMo 11O 39]} (5-), reveals coordination of the central Hf (IV) cation via four bridging oxygens on both the coordinated [PMo 11O 39] (7-) and [PMo 12O 40] (3-) anions. Unusually, the highly charged lacunary site remains uncoordinated to the Hf metal center but instead interacts with an ammonium cation. (31)P NMR indicates that complexation of the Keggin anion, [PMo 12O 40] (3-), to Hf (IV) and Zr (IV) will stabilize the Keggin anion to a much higher pH than usually observed.     

Novel charge transfer supramolecular assemblies with Keggin anions and 2-amino-5-nitropyridine

Several novel compounds with the non-linear optical chromophore 2-amino-5-nitropyridine (2A5NP) and Keggin polyoxoanions (alpha-isomers), having the general formula (2A5NP)(m)H(n)[XM12O40].xH2O, M = Mo, W, were synthesised. Compounds were obtained with X = P, n = 3, m = 3 and 4 and X = Si, n = m = 4 (x = 2-6). Thus, for each of the anions [PMo12O40]3- and [PW12O40]3- two different compounds were obtained, with the same anion and organic counterpart but with a different stoichiometric ratio. These presented different charge transfer properties and thermal stability. All compounds were characterised by spectroscopic and analytical techniques. The single crystal X-ray diffraction structure of (2A5NP)4H3[PMo12O40].2.5H2O.0.5C2H5OH showed that the water solvent molecules and the organic chromophores are assembled via infinite one-dimensional chains of hydrogen bonds with formation of open channels, which accommodate [PMo12O40]3- and ethanol solvent molecules.     

A novel zirconium polyoxometalate complex that contains both a coordinated saturated anion, [PMo12O40]3-, and a coordinated unsaturated anion, [PMo11O39]7-

The novel 8-coordinate zirconium compound (NH(4))(6)[Zr(PMo(12)O(40))(PMo(11)O(39))].26H(2)O (1) has been synthesized and characterized by single-crystal X-ray diffraction, elemental analysis, and vibrational and (31)P NMR spectroscopy. It is the first example of a metal complex containing both parent, [PMo(12)O(40)](3)(-), and monovacant lacunary, [PMo(11)O(39)](7)(-), anions. Furthermore, this is the first crystallographic determination of the [PMo(11)O(39)](7)(-) anion.     

组合改性Y型分子筛的加氢裂化性能

采用水热、草酸脱铝及表面活性剂存在下的水热晶化相结合的组合法对Y型分子筛进行了改性, 考察了表面活性剂十六烷基三甲基溴化铵（CTAB）存在下的CTAB加入量对Y型分子筛相对结晶度（Xc）、晶胞常数（a₀）、硅铝比、比表面积、孔结构及加氢裂化性能的影响, 并利用NH₃-TPD对改性Y型分子筛进行了酸性表征。结果表明, 少量的CTAB就可以使Y型分子筛的相对结晶度从37.9%提高到68.3%, 硅铝比从7.72增大到9.32, a0从2.4534nm减小到2.4485nm, 介孔的孔体积从0.157mL/g提高到0.180mL/g以上,且总酸酸量降低。VGO的加氢裂化反应结果表明,CTAB存在下改性Y型分子筛的加氢裂化活性和中间馏分油收率比工业催化剂分别高2.42%和4.20%。     

重氮树脂基磁性超薄膜及其图形化

构建磁性薄膜,在磁性理论和应用技术上都有重要意义．通过磁性膜的研究,能揭示磁性机制,对界面磁性、维度磁性、磁性的藕合特征、磁性量子效应等建立新的认识．磁性膜还提供一种新的人造磁性材料,在信息储存、磁性图像、医学等方面有潜在应用．目前,形成磁性薄膜的技术主要有溅射(Sputtering)、分子外延性生长(Molecular beam epitaxy)、真空喷镀、电泳、脉冲激光沉积、Langmuir-Blodgett(LB)沉积、层层组装(LBL)等方法．