室温固相化学反应合成表面修饰的碘化铅纳米棒

以硝酸铅和碘化钾为原料, 在体系中添加表面活性剂聚乙二醇(PEG), 采用一步室温固相化学反应制备出聚乙二醇表面修饰的碘化铅纳米棒, 利用X射线衍射, 红外光谱, 透射电子显微镜, 扫描电子显微镜, 热分析和元素分析等手段对其进行了表征. 实验结果表明: 在体系中添加的表面活性剂PEG不仅与碘化铅纳米棒发生了化学键合作用, 而且对产物形貌的控制起到决定作用, 形成了表面键合有聚乙二醇的碘化铅纳米棒, 其中被PEG600修饰的碘化铅纳米棒粗细均匀, 表面光滑, 直径约为100 nm, 长度达2 μm.     

室温固相化学反应法合成Cd(OH)2纳米棒

在表面活性剂聚乙二醇(PEG)存在下,利用Cd(Ac)2·2H2O,CdCl2·2.5H2O,3CdSO4·8H2O和CdCO3分别与NaOH在室温下进行固相化学反应,合成了一系列的Cd(OH)2纳米棒,并利用XRD,TEM和SEM对其结构和形貌进行了表征.实验结果表明,表面活性剂PEG在Cd(OH)2纳米棒的形成过程中充当软模板,对产物形貌的控制起到决定作用.利用这种表面活性剂辅助的软模板固相化学反应法合成一维纳米材料,具有简便易行、反应条件温和以及能耗低等优点.     

温和条件下制备形貌可控的羟基磷灰石

在温和条件下采用简单的实验方法成功制备出不同结构和形貌的羟基磷灰石(HAP)纳米粒子。采用沉淀-水解两步法,以PEG和PVP为表面活性剂,在沉淀步骤制备出前驱体CaHPO₄粒子,然后在100℃、常压条件下水解获得高结晶度的HAP纳米棒。采用PEG制备的纳米棒形貌均匀、纵横比高;采用PVP制备的纳米棒尺寸范围较宽且尺寸较小。直接采用一步沉淀法也能够成功制备出HAP纳米粒子。采用PEG制备出麦穗状的纳米粒子;采用PVP制备出尺寸小的纳米棒和纳米粒子混合物。HAP纳米晶的结构和形貌因制备条件不同发生很大变化,故而控制其合成,有望用于生物医药领域。     

温和条件下制备形貌可控的羟基磷灰石（英文）

在温和条件下采用简单的实验方法成功制备出不同结构和形貌的羟基磷灰石(HAP)纳米粒子。采用沉淀-水解两步法,以PEG和PVP为表面活性剂,在沉淀步骤制备出前驱体CaHPO_4粒子,然后在100℃、常压条件下水解获得高结晶度的HAP纳米棒。采用PEG制备的纳米棒形貌均匀、纵横比高;采用PVP制备的纳米棒尺寸范围较宽且尺寸较小。直接采用一步沉淀法也能够成功制备出HAP纳米粒子。采用PEG制备出麦穗状的纳米粒子;采用PVP制备出尺寸小的纳米棒和纳米粒子混合物。HAP纳米晶的结构和形貌因制备条件不同发生很大变化,故而控制其合成,有望用于生物医药领域。     

氧化铜纳米片的水热合成与表征

利用水热法一步制备了形貌均一的氧化铜纳米片,借助场发射扫描电子显微镜、X射线粉末衍射仪和透射电子显微镜分析了产物的形貌和晶体结构;并研究了反应物浓度及表面活性剂等因素对氧化铜纳米结构的影响.结果表明,以氢氧化钠作为碱源时,在不添加任何表面活性剂的情况下,随着氢氧化钠浓度的升高,纳米片的尺寸减小、厚度增大;此外,通过添加不同的表面活性剂可以得到不同形貌的氧化铜纳米结构.     

草酸锌空心纳米结构的一步固相合成及其表征

本文利用醋酸锌和草酸的一步低热固相化学反应制备了草酸锌空心纳米球，并通过在该反应体系中加入表面活性剂聚乙二醇400得到了草酸锌空心纳米链。采用X-射线粉末衍射（XRD）、透射电镜（TEM）、高倍透射电镜(HRTEM)、扫描电镜(SEM)、红外(IR) 以及热重-差热(TG/DTA)分析对所合成的样品进行了表征.     

一种制备高长径比金纳米棒的新方法

报道了一种制备高长径比金纳米棒的新方法. 在25 ℃条件下, 采用种子介导生长法, 通过优化表面活性剂十六烷基三甲基溴化铵(CTAB)的浓度, 制备了长度(200±18.62) nm, 长径比大于10的金纳米棒, 并讨论了金纳米棒的形成机制. 结果表明, 金纳米棒的长径比和纵向吸收波长与CTAB的浓度有关. 此外, 通过提高反应液的离子强度, 利用制备的金纳米棒与球形颗粒不同的静电作用将金纳米棒分离纯化. 运用透射电子显微镜(TEM)和扫描电子显微镜(SEM)对金纳米棒的表面形貌进行表征.     

特殊形貌GdF3:Eu3+纳米发光材料的制备及性能

以PEG-2000、柠檬酸和甘氨酸为表面活性剂,采用水热法制备出扁平纳米棒、纳米花和纳米片状的GdF3:Eu3+发光材料,并对其结构和性能进行了表征.XRD结果表明,所得样品均为正交晶系.FESEM照片表明,使用不同表面活性剂所制备的产物形貌不同.研究了以PEG-2000为表面活性剂时反应物浓度对产物形貌的影响,并对其...     

硫化铜纳米棒的低热固相合成及其光学性能

在表面活性剂PEG-400存在的条件下,以醋酸铜和硫代乙酰胺为原料,利用低热固相化学反应,一步制备出分散均匀的硫化铜纳米棒.X射线粉末衍射和能量散射X射线能谱分析证明,产物为纯六角相的硫化铜.透射电镜和扫描电镜形貌分析表明,产物为棒状,直径为80～100nm,长度为200～500nm.紫外-可见光谱和光致发光光谱表明,硫化铜纳米棒的紫外和荧光最大吸收和发射波长与常规硫化铜相比均发生了明显的蓝移,表明所制备的硫化铜纳米棒具有良好的光学性质.     

在表面活性剂溶液中制备不同形貌的芘纳米材料

利用水溶液中表面活性剂分子和有机小分子间的相互作用,成功地制备了具有不同形貌的芘纳米颗粒和纳米棒.对其进行吸收光谱和荧光光谱等光物理行为的研究发现,不同形貌的纳米材料展现出不同的光学性质.同时对纳米材料的形成机制做了初步的分析和讨论.     

草酸镁空心纳米结构的一步低热固相化学合成(英)

Nanostructuredmaterialsareafocusedresearchfieldduetotheirunusualpropertiesandpotentialap-plicationsrangingfrommesoscopicresearchtothede-velopmentofnanodevices[1,2].Especially,allsortsofnanoscalematerialswithspecificstructureorinter-estingmorphologyhavepro…     

氢氧化钴纳米棒的室温固相化学合成及其表征

一维或准一维纳米结构体系或纳米材料的研究,既是研究其他低维材料的基础,又与纳米电子器件及微型传感器密切相关,是近年来国内外研究的前沿.尽管有许多合成一维纳米材料的方法[1～4],但是这些方法往往各有其局限性且大多需要多个步骤,操作复杂,条件苛刻.因此,寻找反应条件温和,易于操作,适用范围广,一步就能制备一维纳米材料的新方法尤为重要.     

Synthesis of Copper Oxalate Nanorods by a Simple One-step Solid-state Chemical Reaction Method

Copper oxalate nanorods were successfully prepared by means of a simple one-step solid-state reaction method with the assistance of a suitable surfactant, polyethylene glycol 400. The product with uniform rodlike morphology was characterized by XRD, TEM and SEM. The formational mechanism of the rod-like structure was also preliminary discussed.     

低热固相反应制备一维棒状CoFe2O4及其电磁特性

以草酸、硝酸铁、硝酸钴为原料, 加入不同聚合度的PEG, 采用低热固相反应法制备出草酸铁和草酸钴的混合前驱物. 在不同的温度(25, 60, 70, 75 ℃), 混合前驱物分别恒温反应2 h, 然后经450 ℃灼烧. 对获得的粉体用XRD, SEM, 激光粒度仪表征后证明: 加入PEG400在75 ℃反应获得了长径比约为6～15范围, 具有立方晶系尖晶石结构的棒状CoFe2O4铁氧体粉末. 经测试电磁学性质发现, 与粒状的CoFe2O4相比, 棒状的CoFe2O4磁导率虚部在高频15～20 GHz范围增加了近1倍, 各向异性常数Ku则增加了近5倍. 预示一维棒状结构的CoFe2O4作为吸波材料具有良好应用前景.     

Viscosities of oxalic acid and its salts in water and binary aqueous mixtures of tetrahydrofuran at different temperatures

Relative viscosities for the solutions of oxalic acid and its salts, viz. ammonium oxalate, sodium oxalate and potassium oxalate, at different concentrations have been determined in water and in binary aqueous mixtures of tetrahydrofuran (THF) [5, 10, 15 and 20% by weight of THF] at 298.15 K, and in water and in 5% (w/w) THF + water at five different temperatures. The data have been evaluated using the Jones-Dole equation and the obtained parameters have been interpreted in terms of solute-solute and solute-solvent interactions. The activation parameters of viscous flow have been obtained which depicts the mechanism of viscous flow. The oxalic acid and its salts behave as structure breakers in water and in binary aqueous mixtures of THF.     

Effect of span 20 concentration on oxalic acid production from post-refining fatty acids by Aspergillus niger XP

Submerged fermentation experiments were carried out to study the stimulating effects of the surfactant Span 20 on the growth of Aspergillus niger XP mutant and oxalic acid production from the post-refining fatty acids. Span 20 concentration of 0.75 g dm⁻³ was found to be the most suitable for oxalic acid production from fatty acids. Using this dose and a fermentation medium containing 30 g dm⁻³ of post-refining fatty acids, the oxalic acid production, oxalate yield, and overall oxalate productivity were the highest. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

Synthesis and structure of tricyclic quinazoline alkaloid oxalates

Oxalates of the alkaloids deoxyvasicinone, 2,3-tetra-, and their seven-membered analog 2,3-pentamethylen-3,4-dihydroquinazol-4-one and the complex of 2,3-pentamethylen-3,4-dihydroquinazol-4-one hydrochloride with oxalic acid were synthesized. It was found that 2:1, 2:1, and 1:1 alkaloid:oxalic acid complexes, respectively, were formed. The last complex had 2,3-pentamethylen-3,4-dihydroquinazol-4-one, oxalic acid, and HCl in a 2:1:2 ratio, respectively. X-ray crystal structures of single crystals were performed. The oxalate of 2,3-pentamethylen-3,4-dihydroquinazol-4-one and its hydrochloride formed salts with a protonated N1 atom and involvement of only one hydroxyl. The other alkaloids formed a complex with oxalic acid through N1…H-O H-bonds involving both acid hydroxyls. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 152–156, March–April, 2007.     

Spectral and thermal characterization of polyaniline–oxalic acid salt

Polyaniline–oxalic acid salts were prepared at 5 and 30°C by chemical polymerization of aniline using different concentration of oxalic acid. Polyaniline base was obtained from the corresponding polyaniline salt by dedoping using aqueous ammonium hydroxide solution. Conductivity measurements, elemental analysis, Infrared, electronic absorption, electron paramagnetic resonance spectral, and thermogravimetric analysis were performed on the polyaniline salts and bases. Composition and the extent of dopant in polyaniline salt systems where determined. The value of composition of polyaniline: oxalic acid is 4: 1.6 and the polymer yield is around 66%. The value of conductivity, polymer yield and composition of polyaniline–oxalic acid salt is independent of concentration of oxalic acid used and also the synthesis temperature. The results are compared with polyaniline–hydrochloride salt prepared by chemical polymerization. The conductivity of polyaniline–oxalic acid salt is three orders of magnitude lower than that of polyaniline-hydrocholoride salt. © 1995 John Wiley & Sons, Inc.