离子液体的制备及其在酶催化反应中的应用

离子液体，尤其是非水溶性离子液体可以作为一种溶剂或酶的载体用于非水相酶促反应中，也可以用于双相体系中的酶促反应。本文概括性介绍了常见离子液体的制备，总结和讨论了离子液体中酶的活性、稳定性、反应选择性以及各类酶在离子液体中的催化反应行为。离子液体的物性及其与酶的相容性对酶本身及酶促反应都有很大的影响。在非水相酶促反应中，离子液体的极性作用不遵从通常用来判别大多数有机物溶剂行为的规则，比如lgP规则。     

游离和溶胶-凝胶固定化甲醛脱氢酶酶促反应动力学的研究

采用溶胶-凝胶法对甲醛脱氢酶进行固定化，酶的包埋率超过了98％．在pH7附近、37℃下，以游离酶和固定化酶作催化剂，NADH为电子供体，进行了甲酸转化为甲醛的酶促反应．游离和固定化甲醛脱氢酶酶促反应都遵循Michaelis-Menten反应机理，用Dalziel提出的双底物酶促反应动力学方程进行拟合．固定化酶酶促反应速率为游离酶酶促反应速率的50％左右．固定化酶的动力学常数φ和米氏常数K高于游离酶，估计是凝胶基质孔中存在扩散效应所致．     

羧甲基纤维素水凝胶生物降解动力学研究

用氯化铝对羧甲基纤维素进行交联,制得了水凝胶.考察了底物浓度、酶浓度以及降解温度对该水凝胶降解速率的影响,探讨了酶降解动力学及“表观”活化能对酶浓度的依赖关系.结果表明,该酶促反应最佳温度为37 ℃,降解反应对底物浓度和酶浓度的反应级数分别为1级和1.2级;得到了与传统的Michaelis-Menten动力学机制不同的非均相酶促反应动力学模型,确定了“表观”活化能与酶浓度之间的定量关系.     

非水溶剂中酶反应研究进展

本文报道了在非水溶剂系统中进行酶促反应的最新进展。对于酶反应的低水体系与必需水，酶活性与非水介质性质之间的关系，疏水参数ｌｏｇＰ，介质工程与酶经酶经配体印迹后，其活性比未经印迹的酶活性明显提高等进行了介绍，并举例说明了在非水溶剂中进行酶促反应的应用前景。     

蛋白酶在有机合成中应用的新进展

介绍了有机溶剂中酶促反应的一些基本概念, 总结了酶促反应的发展情况, 归纳了近几年来将蛋白酶应用于有机合成的一些新策略。     

壳聚糖的酶法降解

用壳聚糖酶降解壳聚糖,探讨了壳聚糖降解过程中温度、pH值、底物浓度和金属离子对酶促反应的影响。结果表明:酶促反应进行到5 h左右时,即可得到聚合度小于10的壳寡糖。该酶促反应的最适温度为50℃,最适pH=5.5;最适底物浓度为0.02 g/mL;金属离子Ca2+和Mg2+对酶降解有一定的促进作用,而Zn2+、Cu2+对酶降解有较强的抑制作用。该酶促反应符合米氏动力学方程,米氏常数Km=7.80 g/L,最大反应速率Vmax=7.72 g/(min.L)。     

聚碳酸乙烯撑酯与双端氨基聚乙二醇交联体系固定化酶载体的合成与表征

将聚碳酸乙烯撑酯(PVCA)与α,ω-双端氨基聚乙二醇(H₂N-PEG-NH₂)溶于DMF,于液蜡中进行交联反应制得亲水性固定化酶载体,将其与胰蛋白酶进行偶联反应制备了固定化胰蛋白酶.酶蛋白的比活力及其于载体上的结合量与反应条件有关,当w(PVCA)/w(H₂N-PEG-NH₂)为0.5时,二者均处于最高值.此固定化酶酶促反应的最适pH值和Km值均较之溶液酶有显著提高,但二者的最适酶促反应温度却相当一致.     

离子液体中酶促区域选择性合成CFAE

碳水化合物脂肪酸酯(CFAE)作为一类非离子型生物表面活性剂,被广泛用于食品、医药及化妆品工业,一些CFAE还具有抗菌、抗肿瘤等特殊生物活性。非水介质中酶促区域选择性合成CFAE反应的瓶颈在于高极性碳水化合物与酰基供体不易相溶,并具有多个可酰化羟基。传统有机溶剂虽能提高极性底物在体系中溶解度,但常使酶活下降。新型绿色介质离子液体用于CFAE的酶法合成过程具有诸多优点,不仅生物催化剂能维持较好的活性与稳定性,且良好的底物溶解性可改善反应区域选择性及转化速率,反应体系还可重复利用。本文介绍了离子液体中影响酶促区域选择性合成CFAE反应的主要因素,包括酶、底物在离子液体中的溶解性能及底物自身性质等,详述了离子液体中酶促制备CFAE的研究进展,也指出了酶促合成CFAE存在的问题与发展前景。     

以邻氨基酚为底物的伏安酶联免疫分析体系酶促反应的研究

辣根过氧化物酶 (HRP)催化H2 O2 氧化邻氨基酚的酶促反应与邻氨基酚的氧化产物的电极还原反应相偶合的伏安酶联免疫分析新体系具有很高的灵敏度 ,测定HRP的检出限为 6 .0× 1 0 -10 g/L ,线性范围为 1 .0× 1 0 -9～ 4.0× 1 0 -6g/L .制备出了HRP催化H2 O2 氧化邻氨基酚的产物纯品 ,并应用电化学分析、高效液相色谱、紫外 可见光谱、红外光谱、13 C核磁共振谱、1H核磁共振谱、质谱、元素分析等技术对体系酶促反应进行了深入的研究 .在所选择的酶促反应条件下 ,生成的产物为 3 氨基吩嗪 .提出了酶促反应及其产物的电极还原过程 .     

酶促反应分子马达的研究进展

传统观点认为酶促反应并不会影响酶本身的扩散运动.最近的研究表明,在酶促反应过程中,酶分子的扩散系数会增大,而且其增大强度具有底物依赖性,即随着底物浓度的增加而增大.酶促反应分子马达,是利用酶促反应过程中产生的能量驱动纳米或微米级物体的运动.尽管在几种不同的酶体系中的研究已经证实了酶在催化过程中的底物依赖性,但是造成酶扩散增强的原因至今仍不清楚.本文从酶促反应过程中酶自身扩散系数的变化、酶自身扩散系数变化的可能机理及其应用等3个方面,对酶在催化过程中的底物依赖性以及酶促分子马达的研究进展进行了综述.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.