电热蒸发进样低功率MPT—AES测定铜,锌,镉的研究

微波等离子体炬(MPT)是一种具有类似ICP炬管结构的新型等离子体光源,该光源的基本性质已进行了详细的研究。本文采用自制的低功率MPT为激发光源,以氧为工作气体,用微型电热蒸发装置进样,测得铜、锌和镉的检出限分别为3.3、1.4和1.7ng/mL。考察了碱金属元素对铜、锌和镉发射信号的影响,该方法应用于钢样中铜的测定,结果较好。     

微波等离子体炬原子发射光谱法测定米粉中微量元素——一个大学化学仪器分析实验的设计与实践

设计了一个科研参与型的大学化学仪器分析实验。本实验应用MPT原子发射光谱仪对米粉中的金属元素(Ca,Cu,Fe,Mn)进行了检测分析。对影响金属元素检测性能的实验条件,如微波等离子体炬的微波功率和维持气流量进行了系统的考查及优化。最后,通过对样品进行测定,证实与标准含量相符,结果比较满意。学生在实验过程中,可以学习和掌握样品的前处理方法、原子发射光谱的机理和仪器测试条件的优化。     

以金属离子为增稳剂的酶法终点法测定MPT- NAG含量

建立了快速、简便、灵敏地测定MPT - NAG含量的酶法终点法.以金属离子为增稳剂,N-乙酰-β-D-氨基葡萄糖苷酶(NAG)催化6-甲基-2-硫代吡啶-N-乙酰-β-D-氨基葡萄糖苷(MPT - NAG)水解,生成产物6-甲基-2巯基吡啶(MPT),MPT在340 nm处有吸收峰,通过测定340 nm处吸光度值计算M...     

微波等离子体炬-质谱法测定饮用水中微量钙

以微波等离子体炬(MPT)作为离子源,廉价离子阱为质量分析器,建立了用常见有机质谱仪测定饮用水中微量钙的方法.实验考察了MPT工作气流量、载气流量等参数对待测元素信号的影响,并对这些参数进行了优化.在优化的实验条件下,采用标准加入法对井水、自来水及瓶装饮用矿泉水等样品中的微量钙进行了测定.结果表明,该方法的检出限(LOD)为3.88 ng/L,相对标准偏差(RSD)为2.87%~8.04%,加标回收率(R)为101.3%~115.1%.     

桑蚕丝腺体和丝纤维中金属离子的含量

用不同的测试方法, 即质子诱导X射线发射(PIXE)、电感耦合等离子体质谱(ICP-MS)和原子吸收光谱(AAS)对桑蚕丝腺体和丝纤维中金属元素的含量进行了详细的表征. 结果表明, 在桑蚕丝腺体和丝纤维中含有钠、镁、钾、钙、铜、锌、铁、锰八种金属元素, 同时还可能含有微量的铷和锶. 这些金属元素在丝腺体和各种丝纤维(蚕茧丝、强拉丝和脱胶丝)中的含量都有所变化, 而这些变化可能与之在成丝过程(丝蛋白的构象转变过程)中所起的作用有关.     

甲基对硫磷在聚噻吩/纳米二氧化钛修饰玻碳电极上的电化学行为及其测定

用循环伏安法(CV)、线性扫描溶出伏安法(LSSV)研究了甲基对硫磷(MPT)在聚噻吩/纳米二氧化钛修饰玻碳电极(PTh-NTiO2/GCE)上的电化学行为.实验表明,该修饰电极能显著提高MPT的氧化还原峰电流,在B-R缓冲溶液(pH 5.72)中,于-0.662V( vs.SCE)处产生灵敏的不可逆还原峰,其峰电流与...     

介孔二氧化钛/导电碳毡光电极的制备及光电催化性能

以四氯化钛为无机钛源,十六烷基三甲基溴化铵为模板剂,通过水热合成法制得无机物钛前驱体溶液.以导电碳毡(CCF)为载体,在超声波辅助下用浸渍提拉法负载钛前驱体,通过高温煅烧得到介孔二氧化钛/导电碳毡(MPT/CCF)光电极材料,对样品的结构进行了表征,并以室内污染物气相苯甲醛为目标降解物,通过评价不同煅烧温度和不同负载次数下MPT/CCF的光电催化性能优化了MPT/CCF的制备工艺条件,探讨了催化降解条件(温度、湿度、偏电压)对协同增效机制的影响.结果表明,相对于纯介孔二氧化钛(MPT),MPT/CCF具有较小的粒径尺寸、更大的比表面积和较均匀的孔径分布,这归功于CCF对晶粒生长的抑制作用.其中负载2次MPT并在500℃下煅烧的2-MPT/CCF-500样品具有最高的光电催化活性,主要是由于其具有完善的晶型、均匀的介孔分布和高浓度的羟基自由基,并且在重复使用过程中也具有很高的光电催化活性.最佳的催化条件为温度35℃、相对湿度55%、偏电压10 V.     

两种微波等离子体炬质谱测定水中铅的对比研究

建立了一种新型的能够灵敏分析水中痕量铅的质谱方法,以微波等离子体炬(MPT)为离子源,可无需样品预处理而直接分析水样。样品经雾化和去溶后由MPT的中心管道引入等离子体,离子由国产的四极杆质谱仪(Q-MS)检测,得到铅的MPT特征质谱。定量结果表明,该方法的检出限为20 ng/L,线性范围为200~1 000 ng/L,相对标准偏差(RSD)为5.3%;所得定量指标优于相同条件下商用的线性离子阱质谱(LTQ-MS)测试结果,且四极杆质谱仪上所得的铅离子特征质谱信号更简单、易归属,无需复杂的多级串联质谱加以确认。这种MPT可与国产质谱仪器相结合发展成为一种低成本的现场检测铅的质谱仪器,在环境监控、饮用水检验等方面具有一定的应用价值。     

一种原子光谱分析用新激发光源——千瓦级微波等离子体炬(kW-MPT)

<正>微波等离子体炬(MPT)[1]在小功率下工作时,形成的ArM PT原子光谱分析技术(ArM PT-AES)只要在进样系统中加入一套溶液雾化和去溶装置,把样品气溶胶中大量存在的溶剂水除去后,对多种元素的检测能力即已接近在千瓦以上功率下工作的电感耦合等离子体发射光谱(ICP-AES)[2~5],而以氦作为工作气体的He MPT-AES还可检测包括ICP-AES难以检测的卤素在内的非金属元素[2].如果将其     

微波等离子体炬质谱直接分析水中镉的研究

建立了一种测量水中痕量镉的质谱电离新方法。以微波等离子体炬(MPT)为离子源,结合质谱仪器可直接分析水样而无需任何样品预处理。水样直接通过雾化器雾化形成气溶胶,气溶胶经加热冷却循环及浓硫酸干燥后,由MPT中心管道引入等离子体,产生的离子采用四极杆质谱仪(QMS)检测,得到镉的MPT特征质谱。根据镉的特征质谱进行定量分析。结果表明,114Cd的信号强度与溶液中镉离子浓度在300~3 000ng/L范围内呈良好线性关系,相关系数可达0.994 96,检出限(LOD)为72.7 ng/L。对实际水样(自来水、太湖湖水、赣州龙南井水、矿泉水)进行分析,加标回收率为90.6%~112.2%,10次测量的相对标准偏差(RSD,n=10)为7.1%~21.5%,单个样品测试可在2~3 min内完成。因此,MPT质谱法对水中有害金属镉的快速测量具有一定优势,作为传统ICP质谱检测的有力补充,可以发展成为在线分析方法,应用于环境水、生活水质量监控等领域。     

离子色谱法测定土壤中的Cl~–和SO_4~(2–)

采用离子色谱法测定土壤浸提液中的Cl–和SO42–。选择2.0 mmol/L Na2CO3–1.3 mmol/L NaHCO3混合液为淋洗液,流速为2 mL/min,在此条件下,Cl–保留时间为1.96 min,SO42–保留时间约为12.26 min,Cl–,SO42–的质量浓度分别在2~8,10~30 mg/L范围内与色谱参数线性相关,相关系数分别为0.999 4和0.999 7,Cl–,SO42–的平均加标回收率分别为93.8%,105.4%,测量结果的相对标准偏差均小于1%(n=6)。该法适用于土壤中Cl–和SO42–的测定。     

二维离子色谱法同时测定环境水样中的碘离子、硫氰酸根和高氯酸根

建立了二维离子色谱法同时测定环境水样中的碘离子、硫氰酸根离子和高氯酸根离子的方法。先采用常规阴离子色谱柱(IonPac AS16, 250 mm×4 mm)将水样中的碘离子、硫氰酸根离子和高氯酸根离子与干扰离子进行分离。样品溶液通过抑制器后,将含有碘离子、硫氰酸根离子和高氯酸根离子的淋洗液导入富集柱(MAC-200, 80 mm×0.75 mm),再通过毛细管阴离子色谱柱(IonPac AS20 Capillary, 250 mm×0.4 mm)进行分离和定量分析。方法的线性范围为0.05～100 μg/L,相关系数达到0.9999,检出限为0.02～0.05 μg/L。样品中碘离子、硫氰酸根离子和高氯酸根离子的加标回收率在85.1%～100.1%之间,回收率的相对标准偏差(RSD)(n=6)在1.7%～4.9%之间。该法试剂用量小,灵敏度比常规离子色谱提高30～40倍,同时去除了样液中的高浓度基体杂质,适用于水样中低含量碘离子、硫氰酸根离子和高氯酸根离子的检测。     

Potentiometric Measurements in Non-Aqueous Media Using Bromide and Iodide Ion Selective Membrane Electrodes

Abstract

Solid membrane bromide and iodide ion selective membrane electrodes were evaluated for their performance in non-aqueous media. The electrodes were evaluated in several alcohols and glacial acetic acid.     

Conductance Studies of Alkali Metal Acetates in Acetic Acid-Acetonitrile Mixtures

Abstract

Conductance behaviour of lithium, sodium and potassium acetates in 20% and 80% acetic acid-acetonitrile mixtures at 35° have been measured. The association constants were evaluated by Fuoss-Hsia equation of 20% acetic acid-acetonitrile mixtures by making use of TDC-12 Computer. Shedlovsky, Fuoss-Kraus extrapolation techniques were also employed to evaluate the association constants for these salts in both the solvent mixtures. The association constants obtained by these three methods were compared. The results were discussed in terms of various theories of ion pair formation i.e., Bjerrum, Fuoss, Denison-Ramsay, and Ebeling, Kraft, Yokoyama and Yamatera. Hydrodynamic radius was also calculated to understand the solvation of ions, in 20% and 80% acetic acid-acetonitrile mixtures.     

铵盐离子对中有机阴离子交换排序的研究

本文用测定ClO_4~-离子选择性电极电势选择性系数K_(ij)~(pot)的方法,研究了七种长链季铵大阳离子与十余种有机阴离子在水、油两相中交换能力的排序。即: C_2O_4~-相似文献   

双波长分光光度法同时测定溶液中的硝酸根和碘离子

食品和环境样品中往往同时含有硝酸根和碘离子,用紫外分光光度法直接测定硝酸根或碘离子时,二者相互干扰。为此建立了主、次波长分别为220.0、231.5 nm的等吸收点双波长紫外分光光度法测定溶液中的硝酸根和共存的碘离子。当溶液中硝酸根的浓度在0~0.12 mmol/L的范围内,碘离子的浓度在0~0.10 mmol/L的范围内时,主、次波长下的吸光度差值A220-231.5与溶液中硝酸根的浓度 呈良好线性关系,线性方程为A220-231.5 = 2.9958 0.0016（R2 = 0.99994）;其中A220 (NO3-) = 3.6099 0.0084（R2 = 0.99994）,利用吸光度的加和性：A220 (I-) = A220 - A220 (NO3-) = 10.7394 0.0029（R2 = 0.99994）,间接得到碘离子含量 。硝酸根和碘离子的平均相对标准偏差分别为0.6%、0.2%,回收率分别为99.5~102%、99.9~100%。方法简便快捷,可用于溶液中微量硝酸根和碘离子的同时测定。     

Er~(3 ),Ho~(3 )和Tm~(3 )在硫氧化钆中的余辉发光

非放射性长余辉磷光粉作为美化和清洁光源在发光陶瓷、交通安全标志、紧急突发事件的照明设施、工艺美术涂料等众多领域得到越来越广泛的应用,引起人们的重视.到目前为止,文献报道的稀土长余辉磷光体的激活离子主要有铕离子(Eu3+和Eu2+[1-4]、三价铈离子(Ce3+)[5]、三价铽离子(Tb3+)[6]、三价镨离子(Pr3+)[7]、三价钐离子(Sm3+)[8].Ho3+,Er3+,Tm3+等稀土离子作为红外上转换发光材料的激活离子[9～12],而关于它们的长余辉发光的报道极少.最近,雷炳富等在Tm3+离子[13]激活的硫氧化钇体系中发现了长余辉发光.在此,我们通过高温固相法合成了Er3+,Ho3+和Tm3+掺杂的硫氧化钆长余辉磷光粉,观察到该体系中迄今未见文献报道的Er3+,Ho3+和Tm3+离子的长余辉发光.     

Ion transmission in an electrospray ionization-mass spectrometry interface using an S-lens

We present the design and performance of an in-house built electrospray ionization-mass spectrometry (ESI-MS) interface equipped with an S-lens ion guide. The ion source was designed specifically for our ion beam experiments to investigate the chemical reactivity and deposition of the clusters and nanoparticles. It includes standard ESI-MS interface components, such as nanoelectrospray, ion transfer capillary, and the S-lens. A custom design enables systematic optimization of all relevant factors influencing ion formation and transfer through the interface. By varying the ESI voltage and flow rate, we determined the optimal operating conditions for selected silica emitters. A comparison of the pulled silica emitters with different tip inner diameters reveals that the total ion current is highest for the largest tip, whereas a tip with the smallest diameter exhibited the highest transmission efficiency through the ESI-MS interface. Ion transmission through the transfer capillary is strongly limited by its length, but the loss of ions can be reduced by increasing the capillary voltage and temperature. The S-lens was characterized over a wide range of RF frequencies and amplitudes. Maximum ion current was detected at RF amplitudes greater than 50 V peak-to-peak (p/p) and frequencies above 750 kHz, with a stable ion transmission region of about 20%. A factor of 2.6 increase in total ion current is observed for 650 kHz as RF amplitudes reach 400 V p/p. Higher RF amplitudes also focus the ions into a narrow beam, which mitigates their losses when passing through the ion guide.     

Observation of self-ion-molecule reactions during collisionally activated dissociation in an ion-trap mass spectrometer

This paper describes the formation of protonated molecules ([M + H]+) and adduct ions by self-ion-molecule reactions (SIMR) during collisionally activated decomposition (CAD) of methyne addition ions ([M + CH]+) produced from chemical ionization (CI) or SIMR in both an external and internal source ion-trap mass spectrometer (ITMS). The CAD results for the methyne addition ions of dopamine produced from both SIMR and dimethyl ether CI undertaken in the external and internal source ITMS were compared in order to prove the occurrence of SIMR during CAD processes. Compared with the external source ITMS, the internal source ITMS is much more easily applicable to this type of reaction owing to the large population of neutral analytes present in the trap.     

Er3+，Ho3+和Tm3+在硫氧化钆中的余辉发光

The new Er^3 , Ho^3 and Tm^3 doped gadolinium oxysulfide phosphors with the long afterglow emission were synthesized by solid-state reaction method. The synthesized phosphors were characterized by X-ray diffraction. The excitation and photolumineseenee spectra, afterglow spectra and afterglow decay curve were examined by fluorescence spectroscopy. The afterglow spectra of Gd2O2S:Er^3 , Mg, Ti showed typical transitions of Er^3 at 528(2H11/2→4I15/2), 548 (^4S3/2 →^4I15/2) and 669 nm (^4F9/2→^4I15/2). In the afterglow spectra of Gd2O2S: Ho^3 , Mg, Ti,typical transitions of Ho^3 at 546 nm (^5S2→^5I8), 651 and 661 nm (^2F5→^5I8) were observed. In Gd2O2S:Tm^3 , Mg,Ti, the afterglow emission at 800 nm (^1G4→^3H5) of Tm^3 was seen. The meehnism and model of afterglow energy transfer were proposed.