Ni/SAPO-11催化剂上棕榈油加氢脱氧制异构烃燃料(英)

采用水热法合成了小粒径、具有介孔结构的SAPO-11分子筛.采用浸渍法制备了不同Ni负载量的Ni/SAPO-11催化剂.并采用X射线衍射,扫描电镜,N_2物理吸附-脱附,NH_3程序升温脱附,热重和H_2化学吸附技术对该类催化剂的物理化学性质进行了详细表征.结果表明,SAPO-11较大表面积和介孔结构可分散Ni,使得Ni粒子尺寸较小.在棕榈油加氢脱氧制备液体烃类燃料反应中,液体烷烃产物由相关脂肪酸中间产物的直接加氢脱氧和脱羰-加氢脱氧两种途径产生.Ni/SAPO-11催化剂的弱/中强酸性质及其匹配的金属-酸双功能可显著抑制积炭反应,提高催化剂的寿命,液体烷烃收率高达70%,异构烷烃选择性超过80%.     

负载的Ni催化剂上植物油脂加氢脱氧制备第二代生物柴油

在半连续反应器中,以棕榈酸甲酯为植物油脂模型化合物,进行了加氢脱氧制取高品质生物柴油燃料的研究。采用浸渍法制备了HY、SiO₂、γ-Al₂O₃及SAPO-11四种载体负载的Ni催化剂,采用XRD、NH₃-TPD、H₂-TPR、BET、SEM等技术进行催化剂表征。结果表明,Ni/SAPO-11催化剂由于SAPO-11表面呈现的弱酸和中强酸性质,在保持较高的加氢脱氧反应性的同时,抑制了裂解反应的发生,具有较好的催化性能。进一步对SAPO-11上不同的Ni负载量、反应温度、反应压力等进行了研究,发现当Ni负载量为7%,反应温度为220℃,压力为2MPa时,催化剂具有较高的催化性能,棕榈酸甲酯的转化率达到了99.8%,C_9~16烷烃的总选择性为92.71%。     

MnOx/SAPO-11催化剂的制备、表征及其低温NH3-SCR活性

分别采用浸渍法、柠檬酸络合法以及沉淀法在SAPO-11分子筛上负载MnO_x,制备了一系列MnO_x/SAPO-11催化剂。考察了催化剂的低温NH₃选择性催化还原(SCR) (NH₃-SCR) NO_x的性能。结果表明,沉淀法制备的负载量为20%(w)的MnO_x/SAPO-11催化剂表现出最优异的低温NH₃-SCR性能及N₂选择性。通过X射线衍射(XRD)、扫描电镜(SEM)、能量散射谱(EDS)、原子吸收光谱(AAS)、N₂吸附-脱附、X射线光电子能谱(XPS)、H₂程序升温还原(H₂-TPR)、NH₃程序升温脱附(NH₃-TPD)以及NO/O₂程序升温脱附-质谱(NO/O₂-TPD-MS)等多种表征手段对催化剂的结构及表面性质进行分析。表征结果显示,采用不同方法制备催化剂时,其表面MnO_x的存在形式和晶相结构不同。沉淀法制备的催化剂表面存在无定型态MnO_x以及MnO₂晶型,具有较大的介孔及外表面积、更多比例的Mn⁴⁺和化学吸附氧,同时表面存在对反应有利的中强酸以及强酸。因此,催化剂在低温SCR反应阶段能够生成重要中间产物NO₂,从而表现出最佳低温活性。同时,三种制备方法均能使MnO_x相对均匀分散在SAPO-11表面。SAPO-11对催化剂表面MnO_x物种的形成具有一定的影响,从而影响催化剂的酸性,拓宽了MnO_x的活性温度窗口,提高了催化剂的N₂选择性。     

Fe@Si/S-34催化剂的制备及其合成气制烯烃性能

合成气经费托合成反应直接制低碳烯烃是极具开发前景的合成气直接制烯烃技术,其关键是通过产物分布的调控提高低碳烯烃的选择性.本工作将疏水性Fe基费托合成催化剂与SAPO-34分子筛进行复合,制备了一系列不同SAPO-34分子筛含量的Fe@Si/S-34复合催化剂.采用X射线衍射、扫描电子显微镜、N₂吸附-脱附、NH₃程序升温脱附和水接触角测量仪考察了SAPO-34分子筛含量对催化剂物化性质的影响.结果表明SAPO-34分子筛的含量对催化剂的表面积、孔体积、酸性和疏水性具有显著的影响.随着SAPO-34分子筛含量的增加,催化剂的比表面积和总孔体积增加,弱酸和中强酸位点增加,疏水性减弱.催化性能评价结果表明,Fe@Si/S-34复合催化剂明显降低了C₅₊产物选择性,增加了C₂～C₄烃类的选择性,适量的SAPO-34分子筛能够显著提高C₂～C₄烯烃的选择性.本研究将Fe@Si催化剂的疏水性和SAPO-34分子筛对C₅₊烃的...     

ZrCdOx/SAPO-18双功能催化剂催化CO2加氢合成低碳烯烃性能

采用并流共沉淀法制备了不同Zr/Cd原子比(n_Zr/n_Cd)的ZrCdO_x金属氧化物,并与水热法制备的不同硅铝比(n_{SiO_(2})/n_{Al_(2}O₃))的片状SAPO-18分子筛物理混合制得ZrCdO_x/SAPO-18双功能催化剂,研究了其催化CO₂加氢直接合成低碳烯烃性能。采用透射电子显微镜(TEM)、X射线衍射(XRD)、N2吸附-脱附、CO₂程序升温脱附(CO₂-TPD)、NH3程序升温脱附(NH3-TPD)和X射线光电子能谱(XPS)对催化剂进行了分析。与单一ZrO2相比,引入CdO使得ZrCdO_x比表面积下降,当n_Zr/n_Cd=8时制备的Zr8Cd1氧化物呈现出无定形小颗粒状,Zr与Cd之间较强的协同作用使得Zr Cd Ox氧化物产生了更多的氧空位,有利于CO₂的吸附活化。通过对Zr8Cd1金属氧化物与SAPO-18(硅铝比0.1)的质量比、工艺反应温度、压力和空速对催化性能影响的考察,获得了最佳反应条件。研究还发现,当SAPO-18的硅铝比从0.1降为0.01时,Br?nsted酸含量降低,产物中烯烃/烷烃物质的量之比从18.6提高至37.2,但副产物CO含量迅速增加,低碳烯烃时空收率明显下降。     

NiP/SAPO-11催化脂肪酸甲酯加氢脱氧及产物的异构化

采用过量浸渍法制备了不同镍负载量的Ni P/SAPO-11催化剂,并用N2吸附-脱附、吡啶红外光谱、NH3-TPD、H2-TPR等技术对催化剂的物理化学性能进行了测试。脂肪酸甲酯催化加氢脱氧及产物异构化反应在固定床反应器上进行,液体产品分别用GC-MS和GC进行定性和定量分析。结果表明,在温度为340℃,压力为2.0 MPa,氢气流量为60 m L/min,重时空速为2.5 h-1的操作条件下,当Ni负载量为3%(质量分数)时,原料转化率可以达到97.8%,C15-18的收率84.5%,异构化率14.0%。     

二氧化钛负载的镍氧化态对乙腈气相加氢的影响

采用浸渍法制备了二氧化钛负载镍催化剂. 通过控制还原温度(200-400 ℃), 在TiO₂上得到不同氧化态的镍颗粒. 结果发现, 乙腈气相加氢反应受镍氧化态的影响, 300 ℃下还原的催化剂表现出最高的乙腈转化活性, 100 ℃时将乙腈完全转化. 产物产率受到Ni/TiO₂催化剂酸性的影响, 而催化剂的酸性不仅受到TiO₂载体的影响, 还受到负载物Ni 颗粒性质的影响. 随着催化剂还原温度升高, 金属态镍逐渐出现在催化剂表面, 降低了催化剂的酸性强度, 使三乙胺的最大产率升高(从34%升高到48%左右). 研究还发现在Ni/TiO₂催化乙腈加氢反应中, 三乙胺是初始产物. Ni 的状态不仅影响乙腈的转化, 还影响产物的脱附. 提出了乙腈加氢的第一步反应机理.     

不同聚合物分散剂对Pt/SAPO-11催化剂性能的影响

采用浸渍法制备了经过不同聚合物分散剂处理的Pt/SAPO-11催化剂,并通过X射线衍射(XRD)、透射电子显微镜(TEM)、N₂吸附-脱附和NH₃程序升温脱附(TPD)等对催化剂的组织结构进行了表征。结果表明,分散剂不会破坏催化剂的结构,反而提高了其孔体积、孔径和比表面积,同时改变了沸石的酸强度和酸量,其中以聚乙烯吡咯烷酮处理的Pt/SAPO-11催化剂孔体积、孔径和酸性分布最佳。在固定床反应器上对不同分散剂处理的Pt/SAPO-11催化剂催化性能进行评价,结果表明聚乙烯吡咯烷酮处理的Pt/SAPO-11催化剂也表现出最佳的催化性能,麻风树油的加氢脱氧率高达99.45%,生物航空煤油组分收率和异构烷烃组分(C₈~C₁₆)的选择性分别达到了44.67%和56.37%。     

不同聚合物分散剂对Pt/SAPO-11催化剂性能的影响

采用浸渍法制备了经过不同聚合物分散剂处理的Pt/SAPO-11催化剂,并通过X射线衍射(XRD)、透射电子显微镜(TEM)、N₂吸附-脱附和N_H3程序升温脱附(TPD)等对催化剂的组织结构进行了表征。结果表明,分散剂不会破坏催化剂的结构,反而提高了其孔体积、孔径和比表面积,同时改变了沸石的酸强度和酸量,其中以聚乙烯吡咯烷酮处理的Pt/SAPO-11催化剂孔体积、孔径和酸性分布最佳。在固定床反应器上对不同分散剂处理的Pt/SAPO-11催化剂催化性能进行评价,结果表明聚乙烯吡咯烷酮处理的Pt/SAPO-11催化剂也表现出最佳的催化性能,麻风树油的加氢脱氧率高达99.45%,生物航空煤油组分收率和异构烷烃组分(C₈~C₁₆)的选择性分别达到了44.67%和56.37%。     

不同聚合物分散剂对Pt/SAPO-11催化剂性能的影响

采用浸渍法制备了经过不同聚合物分散剂处理的Pt/SAPO-11催化剂，并通过X射线衍射(XRD)、透射电子显微镜(TEM)、N₂吸附-脱附和NH₃程序升温脱附(TPD)等对催化剂的组织结构进行了表征。结果表明，分散剂不会破坏催化剂的结构，反而提高了其孔体积、孔径和比表面积，同时改变了沸石的酸强度和酸量，其中以聚乙烯吡咯烷酮处理的Pt/SAPO-11催化剂孔体积、孔径和酸性分布最佳。在固定床反应器上对不同分散剂处理的Pt/SAPO-11催化剂催化性能进行评价，结果表明聚乙烯吡咯烷酮处理的Pt/SAPO-11催化剂也表现出最佳的催化性能，麻风树油的加氢脱氧率高达99.45%，生物航空煤油组分收率和异构烷烃组分(C₈~C₁₆)的选择性分别达到了44.67%和56.37%。     

Study of catalytic hydrodeoxygenation performance for the Ni/KIT-6 catalysts

Ni/KIT-6 catalysts loaded with different amounts of metallic Ni were prepared by impregnation method. The prepared catalysts and their precursors were investigated through wide- and low-angle XRD, TEM, BET, H₂-TPR, and H₂-TPD analyzes. The catalytic hydrodeoxygenation performance of the catalysts was evaluated using ethyl acetate as a model bio oil compound. Results indicate that the catalytic hydrodeoxygenation performance of the prepared catalysts was directly related to hydrogen storage properties, hydrogen desorption properties, dispersion of the active component Ni, and so on. The ethyl acetate conversion and ethane selectivity of 25?wt% Ni/KIT-6 catalyst were 100 and 96.8%, respectively, at 300?°C, which shows the best performance. The hydrodeoxygenation activity of ethyl acetate was higher than that of methyl acetate and isopropyl acetate because of the effect of molecular polarity and size. And, this reaction is a structure sensitive reaction.     

Sulfide Catalysts for Production of Motor Fuels from Fatty Acid Triglycerides

Patents dealing with the production of motor fuel components by hydrodeoxygenation of renewable raw materials based on fatty acid triglycerides are analyzed. Various methods of using sulfide catalysts in hydrodeoxygenation of fatty acid triglycerides and of their mixtures with petroleum fractions are described. The ways to overcome problems that arise in hydrodeoxygenation, based on using sulfide catalysts differing in the active component and support composition, are considered. For example, the use of supported MoS₂ catalysts free of Co and Ni ensures the conversion of fatty acid triglycerides along the “direct hydrodeoxygenation” pathway to avoid the formation of carbon oxides and related process problems. The use of sulfide catalysts on zeolite-containing supports allows synthesis of products with improved low-temperature properties due to isomerization (or mild hydrocracking) of С₁₅–С₁₈ alkanes formed by hydrodeoxygenation of fatty acid triglycerides.

     

Importance of Size and Distribution of Ni Nanoparticles for the Hydrodeoxygenation of Microalgae Oil

Improved synthetic approaches for preparing small‐sized Ni nanoparticles (d=3 nm) supported on HBEA zeolite have been explored and compared with the traditional impregnation method. The formation of surface nickel silicate/aluminate involved in the two precipitation processes are inferred to lead to the stronger interaction between the metal and the support. The lower Brønsted acid concentrations of these two Ni/HBEA catalysts compared with the parent zeolite caused by the partial exchange of Brønsted acid sites by Ni²⁺ cations do not influence the hydrodeoxygenation rates, but alter the product selectivity. Higher initial rates and higher stability have been achieved with these optimized catalysts for the hydrodeoxygenation of stearic acid and microalgae oil. Small metal particles facilitate high initial catalytic activity in the fresh sample and size uniformity ensures high catalyst stability.     

Effect of the Ni/Cu ratio on the composition and catalytic properties of nickel-copper alloy in anisole hydrodeoxygenation

The activity of NiCu-SiO₂ catalysts with a metal content of 90% and different Ni/Cu ratios has been investigated in the hydrodeoxygenation of anisole, a model compound of bio-oil, at 280°C and 6 MPa. A homogeneous phase composition of the active component has been synthesized by the co-decomposition of nickel and copper nitrates followed by the introduction of SiO₂ as a stabilizer. The resulting catalysts have been characterized by temperature-programmed reduction, X-ray powder diffraction, X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy combined with energy-dispersive microanalysis. The bulk and surface composition of active-component particles has been determined by XPS and X-ray diffraction. In all of the catalysts containing 15–85 wt % Ni, there are two types of solid solutions. One has a constant composition, Cu_0.95Ni_0.05, which is independent of the Ni/Cu ratio in the catalyst; in the other, the nickel stoichiometry increases with an increasing Ni content of the active component. A correlation has been established between the Ni/Cu ratio and the rate constants of the reaction examined and between the Ni/Cu ratio and the degree of hydrodeoxygenation for all samples. The most active catalyst is Ni85Cu5-SiO₂.     

Preparation of modified Ce-SAPO-34 catalysts and their catalytic performances of methanol to olefins

The modified Ce-SAPO-34 catalysts were prepared with three methods, i.e., the liquid ion exchange with air calcination, impregnation with air calcination and impregnation with steam calcination methods. The catalytic performances of the catalysts for methanol to olefins were investigated. The properties of the catalysts were characterized using XRD, BET, XRF, FT-IR and NH₃-TPD. The results indicated that compared to the SAPO-34 catalyst the catalyst prepared with the impregnation and air calcination prolonged the lifetime by 40 min and improved the selectivity to ethylene by 5% (mol) and the catalyst prepared with the impregnation and steam calcination showed the best modification effect, prolonging the lifetime by 70 min and improving the ethylene selectivity by 10% (mol). The catalyst prepared with the liquid ion exchange showed similar behaviour as the SAPO-34 catalyst. It was verified that the porous structure and surface acidity of these catalysts determined their catalytic behaviors.     

乙烷氧化脱氢用Ni/Al2O3催化剂中活性镍物种前驱体（英文）

Ni/Al2O3 catalysts for oxidative dehydrogenation(ODH) of ethane were prepared by impregnation of Al2O3 with nickel acetate or nickel nitrate,and by mechanical mixing of NiO and Al2O3.The Ni-based catalysts were characterized by N2 adsorption-desorption,X-ray diffraction,diffuse reflectance UV-visible diffuse reflectance spectroscopy,and temperature-programmed reduction of hydrogen.The results showed that formation of crystalline NiO particles with a size of < 8 nm and/or non-stoichiometric NiO species in the Ni/Al2O3 catalysts led to more active species in ODH of ethane under the investigated reaction conditions.In contrast,tetrahedral Ni species present in the catalysts led to higher selectivity for ethene.Formation of large crystalline NiO particles(22-32 nm) over Ni/Al2O3 catalysts decreased the selectivity for ethene.