Controlled synthesis and fluorescent properties of poly(9-(4-vinylbenzyl)-9H-carbazole) via nitroxide-mediated living free-radical polymerization

The functional polymer containing carbazole unit, [(poly(9-(4-vinylbenzyl)-9H-carbazole) (PVBK)], was successfully prepared via nitroxide-mediated living free-radical polymerization of 9-(4-vinylbenzyl)-9H-carbazole (VBK). The controlled features of the polymerization were confirmed by the linear increase in the molecular weight with the monomer conversion while keeping the relative narrow molecular weight distribution (M_w/M_n ? 1.51), and successful chain extension with styrene. The resulting polymer absorbed light in the 305-355 nm range and exhibited fluorescent emission at 350 nm. The fluorescent intensity of the polymer was lower than that of monomer and was affected by the properties of the different solvents, which decreased in the following order: DMF > THF > CHCl₃ at the same concentration of carbazole units. The fluorescence intensity of the polymer was apparently influenced by chromophore concentration, and the maximum value was obtained when the carbazole unit concentration was around 8 × 10⁻⁵ mol/L. Moreover, it was shown that the strong fluorescence of PVBK can be quenched by methyl acrylate (MA).     

Ring-Opening polymerization of ε-caprolactone by rare earth coordination catalysts. I. Characteristics,kinetics, and mechanism of ε-caprolactone polymerization with nd(acac)3.3H2O-ALET3 system

Ring-opening polymerization of ε-caprolactone has been carried out by using rare earth coordination catalysts for the first time. The rare earth compounds, RE(acac)₃.3H₂O, Nd(P₂₀₄)₃, Nd(P₅₀₇)₃, Nd(naph)₃, Nd(BA)₃.2H₂O, etc. (where RE = La, Pr, Nd, Sm, Eu, Gd, Dy, Ho, Er, Lu, Y; acac = acetylacetone; BA = benzoylacetone), combined with trialkyl aluminum, greatly increased the degree of conversion and the molecular weight of poly(ε-caprolactone) (PCL). The influence of reaction conditions on the polymerization of ε-caprolactone catalyzed by the Nd (acac)₃.3H₂O-AlEt₃ system has been examined in detail. The kinetics indicates that the polymerization rate has the first-order in monomer and a half-order in catalyst. The overall activation energy of the ring-opening polymerization amounts to 59.4 kJ/mol. By IR and UV-Vis spectra, ¹H- and ¹³C-NMR data, it is assumed that the ring-opening polymerization of ε-caprolactone catalyzed by the Nd(acac)₃.3H₂O-AlEt₃ system proceeds via complexation of monomer to catalyst, acyl-oxygen cleavage insertion propagation mechanism. © 1994 John Wiley & Sons, Inc.     

Cationic polymerization of γ-methyl- and α-methylphenylallene

The cationic polymerizations of γ-methylphenylallene ( 1 ) and α-methylphenylallene ( 2 ) were carried out with some Lewis acids at 25 and 0°C in dichloromethane to obtain the corresponding polymers through allyl cations, respectively. Tin (IV) chloride was found to be an effective catalyst for the cationic polymerization of both allenes 1 and 2 compared with other Lewis acids. Thus, in the polymerization of 1 , methanol-insoluble polymer was only obtained using Tin (IV) chloride, and M?_n of methanol-insoluble polymer obtained by Tin (IV) chloride was the highest in the polymerization of 2 . From the analysis of ¹H- and ¹³C-NMR spectra of the obtained polymers, the polymer from 1 consisted of two kinds of units polymerized by each double bonds of allene 1 , whereas the polymer from 2 consisted of only one unit polymerized by terminal double bond of allene 2 . Moreover, effect of solvent on the cationic polymerizations of 1 and 2 were discussed.     

Grafting of poly(ε‐caprolactone) onto maghemite nanoparticles

We report the coating of maghemite (γ‐Fe₂O₃) nanoparticles with poly(ε‐caprolactone) (PCL) through a covalent grafting to technique. ω‐Hydroxy‐PCL was first synthesized by the ring‐opening polymerization of ε‐caprolactone with aluminum isopropoxide and benzyl alcohol as a catalytic system. The hydroxy end groups of PCL were then derivatized with 3‐isocyanatopropyltriethoxysilane in the presence of tetraoctyltin. The triethoxysilane‐functionalized PCL macromolecules were finally allowed to react on the surface of maghemite nanoparticles. The composite nanoparticles were characterized by diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy, thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). Effects of the polymer molar mass and concentration on the amount of polymer grafted to the surface were investigated. Typical grafting densities up to 3 μmol of polymer chains per m² of maghemite surface were obtained with this grafting to technique. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6011–6020, 2004     

On the behavior of organophosphorus lactam derivatives during anionic polymerization of ε-caprolactam

This article deals with the anionic polymerization of ε-caprolactam in the presence of N-substituted phosphorus-containing derivatives of ε-caprolactam: diethyl-(N-caprolactam)-phosphonite (PL₁); diethyl-(N-caprolactam)-phosphonate (PL₂), and 2,5-dichlorophenyl-bis-(N-caprolactam)-phosphinate (PL₃). It has been found out that PL₁ and PL₃ had an accelerating effect on the anionic polymerization of ε-caprolactam. The polymerization runs at high velocity and high degree of conversion. PL₂ does not accelerate the anionic polymerization of ε-caprolactam, but when the polymerization is activated by a strong activator of acyl lactam type, and the PL₂ concentration is commensurate with that of the activator, the process runs at a slightly lower rate and at a relatively high degree of conversion. The kinetics of the anionic polymerization in the presence of the three compounds was investigated. Equations describing the effect of the reagents on the polymerization rate were suggested. The activating energy of the polymerization was found out. The different actions of PL₁, PL₂, and PL₃ during the anionic polymerization of ε-caprolactam were explained by their structural differences.     

Monoaryloxo ytterbium(III) chlorides supported by β‐diketiminato ligands as novel initiators for the living ring‐opening polymerization of ε‐caprolactone

Ring‐opening polymerization of ε‐caprolactone (ε‐CL) was carried out using β‐diketiminato‐supported monoaryloxo ytterbium chlorides L¹Yb(OAr)Cl(THF) (1) [L¹ = N,N′‐bis(2,6‐dimethylphenyl)‐2,4‐pentanediiminato, OAr = 2,6‐di‐tert‐butylphenoxo‐], and L²Yb(OAr′)Cl(THF) (2) [L² = N,N′‐bis(2,6‐diisopropylphenyl)‐2,4‐pentanediiminato, OAr′ = 2,6‐di‐tert‐butyl‐4‐methylphenoxo‐], respectively, as single‐component initiator. The influence of reaction conditions, such as polymerization temperature, polymerization time, initiator, and initiator concentration, on the monomer conversion, molecular weight, and molecular weight distribution of the resulting polymers was investigated. Complex 1 was well characterized and its crystal structure was determined. Some features and kinetic behaviors of the CL polymerization initiated by these two complexes were studied. The polymerization rate is first order with respect to monomer. The M_n of the polymer increases linearly with the increase of the polymer yield, while polydispersity remained narrow and unchanged throughout the polymerization in a broad range of temperatures from 0 to 50 °C. The results indicated that the present system has a “living character”. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1147–1152, 2006     

Homo‐ and random copolymerizations of ω‐pentadecalactone with ε‐caprolactone using isothiourea‐based dual catalysis

In this study, the catalytic behavior of dual catalysis based on isothioureas (ITUs) for ring‐opening polymerization (ROP) of macrolactone ω‐pentadecalactone (PDL) and its copolymerization with ε‐caprolactone (CL) has been investigated in detail. In the presence of benzyl alcohol (BnOH) initiator, 2,3,6,7‐tetrahydro‐5H‐thiazolo[3,2‐a]pyrimidine (THTP) acted as a representative organic compound, which coupled with magnesium halides (MgX₂) as cocatalysts and catalyzed the polymerization in toluene at 70 °C. Under suitable conditions, an array of polymers with controlled molecular weights and relatively narrow molecular weight distributions were synthesized. The formation of homopolymers and copolymers with different architectures was verified using GPC, DSC, NMR, and matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐ToF) mass. The MALDI‐ToF mass spectrometry (MS) analysis of poly(ω‐pentade‐calactone) (PPDL) provided direct evidence for the successful initiation of ROP of PDL using BnOH to obtain linear PPDL with a very small amount of oligomer. The NMR analysis indicated that the arrangements of PDL and CL units in the copolymer chains were completely random. The thermal stability of copolymers was composition dependent and increased with the increase in the content of PDL unit. Furthermore, the proposed polymerization mechanism is a dual catalytic mechanism. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019     

3α,7α,12α-三甲基丙烯酰基胆酸甲酯的制备与聚合物特性研究

以甲基丙烯酰氯为酰化试剂，合成了3α，7α，12α-甲基丙烯酰胆酸甲酯(CAME3MA)，研究了CAME3MA的光引发本体聚合和溶液聚合反应，并且对CAME3MA及其聚合物的特性进行了表征．实验表明：CAME3MA的本体光引发聚合转化率随光照时间的延长逐渐增加并达到一个最大值，最终的聚合转化率在36％左右，溶液聚合得到线性聚合物。     

稀土硫化物：e–己内酯开环聚合新催化剂

The ring-opening polymerization （ROP） of ε-caprolactone （ε-CL） using lanthanide thiolate complexes [（CH3CsH4）2Sm（μ-SPh）（THF）]2 （1） and Sm（SPh）3（HMPA）3 （2） as initiators has been investigated for the first time. Both of 1 and 2 were found to be highly efficient initiators for the ROP of ε-CL. The poly（ε-caprolactone） （PCL） with molecular weight Mn up to 1.97 ×10^5 and relatively narrow molecular weight distributions （1.20〈MW/Mn〈 2.00） have been obtained in high yield in the temperature range of 35-65℃. According to the polymer yield, 2 showed much higher activity than 1. However, the number-average molecular weight of PCL obtained with 2 was much lower than with 1. The possible polymerization mechanism of the ε-CL polymerization has been proposed based on the results of the end group analysis of the ε-CL oligomer.     

Initiating system Me_3SiCl/AlCl_3 for cationic polymerization of 1,3-pentadiene in toluene

Cationic polymerization of 1,3-pentadiene (PD) initiated by trimethylsilyl chloride/aluminium chloride (TMSCl/AlCl3) was carried out in toluene at 30℃.The polymer yield was increased by the addition of TMSC1.However,introduction of TMSC1 gave rise to a drop of the polymer molecular weight.Kinetic results demonstrated that the polymerization initiated by TMSCl/AlCl3 was 2.8 times faster than that induced by AlCl3 alone.Various ethers and ketones were used to mediate the initiating system TMSCl/AlCl3.The polymer yield and molecular weight of the polymer were decreased in the presence of ether.Ketones and ethers had different effects on the polymerization,and the polymer yield and molecular weight were lower than those initiated by AlCl3 alone or TMSCl/AlCl3 Structural evidence revealed that the polymerization was indeed initiated by AlCl3 and HCl rcsulting from hydrolysis of TMSC1 by adventitious water.     

Synthesis,characterization, electrochromic properties,and electrochromic device application of a novel star polymer consisting of thiophene end‐capped poly(ε‐caprolactone) arms emanating from a hexafunctional cyclotriphosphazene core

Hexa‐armed and thiophene (Thi) end‐capped poly(ε‐caprolactone) star polymer (N₃P₃‐(PCL‐Thi)₆), containing cyclotriphosphazene core, was prepared in a four‐step reaction sequence. Ring‐opening polymerization (ROP) and “click chemistry” techniques were employed in the first and final steps, respectively. Hexa‐armed PCL star polymer (N₃P₃‐(PCL‐OH)₆) was successfully synthesized via ROP of ε‐caprolactone (ε‐CL) by using hekzakis(p‐(hydroxymethyl)phenoxy) cyclotriphosphazene as the multisite initiator and tin(II) 2‐ethylhexanoate (Sn(Oct₂)) as the catalyst in bulk at 115 °C. Further modifications of the N₃P₃‐(PCL‐OH)₆ were accomplished by derivatization of the hydroxyl‐functional chain ends. The obtained N₃P₃‐(PCL‐OH)₆ was then reacted with 2‐bromo‐2‐methylpropanoyl bromide, and this led to a star polymer with bromide end groups, N₃P₃‐(PCL‐Br)₆. In the third step, N₃P₃‐(PCL‐Br)₆ was azidified with sodium azide (NaN₃) in DMF affording N₃P₃‐(PCL‐N₃)₆. Conversion of the azide chain end groups into Thi was quantitatively accomplished via the “click reaction” between N₃P₃‐(PCL‐N₃)₆ and prop‐2‐yn‐1‐yl 3‐thienyl acetate in the final step. Subsequently, the star polymer with six Thi chain ends (N₃P₃‐(PCL‐Thi)₆) was employed in electrochemical copolymerization with both pyrrole and Thi. Electrochromic properties and electrochromic device application of N₃P₃‐(PCL‐Thi)₆/PThi were also investigated. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3668–3682, 2010     

Darstellung und Kristallstruktur von Ca5Hg3 und Sr5Cd3

Preparation and Crystal Structure of Ca₅Hg₃ and Sr₅Cd₃ Both the incongruently melting compounds, Ca₅Hg₃ and Sr₅Cd₃, have been synthesized from stoichiometric amounts of the pure elements. They crystallize with the Cr₅B₃ type of structure: space group I4/mcm, Z = 4; Ca₅Hg₃ (Sr₅Cd₃): a = 818.9(1) (871.7(1)) pm, c = 1 470.1(3) (1 660.1(3)) pm, c/a = 1.80 (1.90), R = 2.33% (2.97%). The most remarkable fragments are dumbbells X₂, which have interatomic distances only slightly longer than the sum of Pauling's covalent radii: Hg? Hg (Cd? Cd) = 306 (298) pm. The structure can be constructed by rhombic dodecahedra as the only constituent moieties. These rhombic dodecahedra are built up by eight Ca (Sr) atoms and six Hg (Cd) atoms and are furthermore centered by an additional Ca (Sr) atom. Along [001] the rhombic dodecahedra share common vertices, but along [110] they are interconnected via common triangular faces. This kind of face sharing is responsible for the short distances obtained between the polyhedra, which leads to the occurrence of the dumbbells mentioned above.     

(CH3)3SiCl/TiCl4 INITIATING SYSTEM FOR CATIONIC POLYMERIZATION OF 1,3-PENTADIENE

Cationic polymerizations of 1,3-pentadiene (PD) initiated by trimethylsilyl chloride (TMSCl) incombination with TiCl_4 were carried out in n-hexane at 30℃. The yield of polymer was greatly increased bythe addition of TMSCl, indicating that the TMSCl/TiCl_4 combination is an efficient initiating system for PDcationic polymerization. However, the introduction of TMSCl gave rise to a drop in the molecular weight ofthe polymer. Kinetic results demonstrated that the polymerization initiated by TMSCl/TiCl_4 is 4.5 times fasterthan that induced by TiCl_4 alone. Various ethers were used to mediate the TMSCl/TiCl_4 initiating system.Adding diphenyl ether could increase both the yield and molecular weight of the polymer. Structural evidenceillustrates that the polymerization is indeed initiated by TiCl_4 in combination with HCl resulting fromhydrolysis by adventitious water.     

Catalyseurs Zieger-Natta supportés sur MgCl2 pour la polymérisation stéréorégulée du propène. II. Système catalytique simple: Solide binaire MgCl2-TiCl4 et solution cocatalytique triéthylaluminium,benzoate d'ethyle

The kinetics of propene polymerization in heptane slurry at 1–4 bars was studied with a catalytic system that consisted of a solid catalyst prepared by adsorption of TiCI₄ on pure porous MgCl₂ (by dehydrating MgCl₂, 6 H₂O with thionyl chloride) and a cocatalytic, heptanic solution of ethylbenzoate (BE) and triethylaluminium (TEA). At a temperature approaching 60°C/polymerization began immediately after the introduction of the monomer. The polymerization rate decreased continuously during the reaction. The loss in activity, however, was not due to a diffusional effect (e.g., blocking of the catalyst by the growing polymer). Studies of the ageing of the catalytic system showed a deactivation of the catalytic system itself as a function of the time of contact between the catalyst and the cocatalyst. The product of the thermal decomposition of the complex 1:2 formed by the reaction of BE with TEA was not associated with the deactivation process or stereospecific control, which depend on the BE/AI ratio and the presence of the complex.     

Study on controlled/living free-radical polymerization of methyl acrylate in the presence of benzyl 9H-carbazole-9-carbodithioate under thermal condition

The polymerizations of methyl acrylate have been studied under thermal condition using benzyl 9H-carbazole-9-carbodithioate (BCCDT) as control agent. The obtained polymers were characterized by gel permeation chromatography (GPC), ¹H nuclear magnetic resonance (¹H NMR) and MALDI-TOF mass spectra. The results at 60 °C show that the molecular weight of the polymer increases linearly with monomer conversion, the molecular weight distribution is fairly narrow (even inferior to 1.10), and there exists a linear relationship between ln ([M]₀/[M]) and polymerization time. It is worthy of being noticed that the narrow polydispersities are comparable with those from living anionic polymerization. All of the evidences indicate that the polymerization is a good ‘living’ process. When the experiment is carried out at higher temperature, the polymerization rate is markedly faster with controlled polymerization characters except for a relatively broader polydispersity. The good control for free radical polymerization may be correlated with the large conjugation structure of carbazyl of BCCDT.     

Synthesis,crystallization, and morphology of star‐shaped poly(ε‐caprolactone)

Six‐arm star‐shaped poly(ε‐caprolactone) (sPCL) was successfully synthesized via the ring‐opening polymerization of ε‐caprolactone with a commercial dipentaerythritol as the initiator and stannous octoate (SnOct₂) as the catalyst in bulk at 120 °C. The effects of the molar ratios of both the monomer to the initiator and the monomer to the catalyst on the molecular weight of the polymer were investigated in detail. The molecular weight of the polymer linearly increased with the molar ratio of the monomer to the initiator, and the molecular weight distribution was very low (weight‐average molecular weight/number‐average molecular weight = 1.05–1.24). However, the molar ratio of the monomer to the catalyst had no apparent influence on the molecular weight of the polymer. Differential scanning calorimetry analysis indicated that the maximal melting point, cold crystallization temperature, and degree of crystallinity of the sPCL polymers increased with increasing molecular weight, and crystallinities of different sizes and imperfect crystallization possibly did not exist in the sPCL polymers. Furthermore, polarized optical microscopy analysis indicated that the crystallization rate of the polymers was in the order of linear poly(ε‐caprolactone) (LPCL) > sPCL5 > sPCL1 (sPCL5 had a higher molecular weight than both sPCL1 and LPCL, which had similar molecular weights). Both LPCL and sPCL5 exhibited a good spherulitic morphology with apparent Maltese cross patterns, whereas sPCL1 showed a poor spherulitic morphology. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5449–5457, 2005     

Titanium complexes of dialkanolamine ligands as initiators for living ring‐opening polymerization of ε‐caprolactone

The titanium complexes with one ( 1a , 1b , 1c ) and two ( 2a , 2b ) dialkanolamine ligands were used as initiators in the ring‐opening polymerization (ROP) of ε‐caprolactone. Titanocanes 1a and 1b initiated living ROP of ε‐caprolactone affording polymers whose number‐average molecular weights (M_n) increased in direct proportion to monomer conversion (M_n ≤ 30,000 g mol^?1) in agreement with calculated values, and were inversely proportional to initiator concentration, while the molecular weight distribution stayed narrow throughout the polymerization (M_w/M_n ≤ 1.2 up to 80% monomer conversion). ¹H‐NMR and MALDI‐TOF‐MS studies of the obtained poly(ε‐caprolactone)s revealed the presence of an isopropoxy group originated from the initiator at the polymer termini, indicating that the polymerization takes place exclusively at the Ti–OⁱPr bond of the catalyst. The higher molecular weight polymers (M_n ≤ 70,000 g mol^?1) with reasonable MWD (M_w/M_n ≤ 1.6) were synthesized by living ROP of ε‐caprolactone using spirobititanocanes ( 2a , 2b ) and titanocane 1c as initiators. The latter catalysts, according MALDI‐TOF‐MS data, afford poly(ε‐caprolactone)s with almost equal content of α,ω‐dihydroxyl‐ and α‐hydroxyl‐ω(carboxylic acid)‐terminated chains arising due to monomer insertion into “Ti–O” bond of dialkanolamine ligand and from initiation via traces of water, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1230–1240, 2010     

The synthesis and structure of La5Pb3Z,Z  N,O. Interstitial derivatives of a Cr5B3-Type structure

Suitable proportions of La, La₄Pb₃ and La₂O₃ or LaN reacted in pressed pellets at 1050°–1250°C result in high yields of the title compounds. Single crystal X-ray studies of the oxide show it to be an isopointal, interstitial derivative of the Cr₅B₃ structure (I4/mcm, Z = 4, a = 8.6895(2) Å, c = 14.540(1) Å, R/R_w = 3.0/3.5%). Oxygen or nitrogen atoms are bound in (La2)₄ tetrahedra within chains along (0, 1 /2, z). Negligible dimerization of the type characteristic of Cr₅B₃ is indicated by the Pb2? Pb2 separation, 3.550(1) Å. The structure is compared with other related examples.     

A Copper‐Carboxylate Layer‐Framework with Pseudo‐­Kagomé Net

A two dimensional coordination polymer with pseudo‐Kagomé net [Cu₃(btc)₂(NH₃)₈(H₂O)] was prepared from Cu(NO₃)₂ · 3H₂O and 1, 3, 5‐benzenetricarboxylic acid (btc) in ammonia aqua solution and was structurally characterized by X‐ray diffraction. The magnetic susceptibility measurements, measured from 2 to 300 K, revealed a weak anti‐ferromagnetic interaction between the Cu^II ions via the btc ligands.     

A 2-D nickel coordination polymer with an unsymmetric ligand, 5-(3-pyridyl)-1,3,4-oxadiazole-2-thione

A new nickel coordination polymer was obtained from an unsymmetric building block 5-(3-pyridyl)-1,3,4-oxadiazole-2-thione (HL6) and Ni(NO₃)₂ · 6H₂O-afforded [Ni(L6)₂(H₂O)₂] _n (1) with a (4,4) network. Complex 1 exhibits moderate antimicrobial activity against Bacillus subtilis ATCC 6633 and Candida albicans ATCC 90028. Thermogravimetric data and magnetic moments for 1 have been investigated.