紫外拉曼光谱研究焙烧气氛对氧化锆相变的影响

 以紫外拉曼光谱技术研究了在不同焙烧气氛中氧化锆样品的表面晶相结构及其转变过程．结果表明，在有氧气氛中焙烧的氧化锆样品易转变为单斜相，而在惰性气氛中焙烧可以有效地稳定样品体相和表面的四方相结构．在缺氧气氛中焙烧的样品暴露于空气中后，表面极易转变为单斜相，而其体相仍为四方相结构，这表明四方相氧化锆在样品表面是极不稳定的．     

焙烧温度对TiO2-ZrO2复合氧化物性质及其对十八醇脱水制十八烯反应性能的影响

通过在ZrO_2中掺杂TiO_2,并在350-500℃下焙烧,制备了系列TiO_2-ZrO_2复合氧化物催化剂,将其应用于十八醇脱水制十八烯反应。随焙烧温度的升高,催化剂表面的Lewis酸性位量逐渐增加,450℃焙烧的催化剂Lewis酸性位量最多,焙烧温度继续升高则Lewis酸性位量降低;催化剂中未发现Br?nsted酸性位。焙烧温度≤400℃的TiO_2-ZrO_2复合氧化物形成Ti-O-Zr键,呈无定形态;焙烧温度400℃的TiO_2-ZrO_2复合氧化物呈单斜相和四方相ZrO_2晶型。晶相结构和酸性位量综合影响催化剂的十八醇脱水性能,具有单斜相和四方相ZrO_2晶型的催化剂上酸性位活性很低,具有无定形相的催化剂上酸性位活性显著增加,400℃焙烧的催化剂1-十八烯收率最高。     

溶剂热法合成纯单斜和四方晶相氧化锆中的溶剂效应

在以水或甲醇为溶剂, 通过溶剂热反应合成纯单斜相或四方相氧化锆的前期工作基础上, 利用X射线衍射手段研究了硝酸氧锆(ZrO(NO3)2·2H2O)和尿素的溶剂热反应产物——水合ZrO2的物相结构在不同反应温度、反应时间及后处理温度等条件下的变化过程, 提出了不同晶相氧化锆的形成、转变以及稳定的可能机理. 不论在水还是甲醇溶液中, 最初水解得到的水合ZrO2沉淀即晶相氧化锆前体都具有四方对称性结构. 在水热反应条件下, 氧化锆沉淀物发生Ostwald熟化(溶解-沉淀)过程, 四方对称性结构转变为热力学稳定的单斜对称性结构. 而在甲醇热反应条件下, 氧化锆沉淀物不溶于甲醇, 从而Ostwald熟化过程被抑制, 使得四方对称性结构得以保持; 同时, 尿素与水合锆沉淀物反应脱除所含的结晶水, 形成更刚性的四方对称性结构, 这样使得高温热处理(400 ℃)只能促进其晶化过程, 但不改变其对称性. 因而, 不同溶剂对氧化锆沉淀物溶解性的差异以及造成的氧化锆沉淀物与尿素反应性能的差异可能是溶剂热反应合成单一晶相氧化锆的关键因素.     

环己酮肟在改性氧化锆催化剂上的Beckmann重排反应Ⅴ.活化焙烧温度对B2O3/ZrO2催化剂的影响

 采用BET，XRD，TG－DTA，FT－IR，XPS和NH3－TPD等分析手段，研究了活化焙烧温度（500～800℃）对B2O3／ZrO2催化剂织构／结构、表面性质和环己酮肟气相重排反应的影响．催化剂活化焙烧温度升高促进了ZrO2向单斜晶相转化，同时活性组分氧化硼由以BO4为主要结构单元的物种转变为以BO3为基本结构单元的B2O3，导致催化剂比表面积、孔体积以及表面酸量减小，ZrO2与B2O3之间的相互作用减弱．700℃活化焙烧的催化剂表面拥有最大比例的中强酸中心，而且Beckmann反应的活性稳定性最高．这些结果表明，活化焙烧温度对B2O3／ZrO2催化剂上气相重排反应的影响主要是通过改变催化剂中B原子的配位状态和表面酸性实现的．     

氧化锆填料的高效液相色谱性能评价

研究了采用溶胶－凝胶技术制备的４－６μｍ粒径氧化锆微球的晶体结构,比表面积,孔容,孔径分布及表面酸碱性,测得氧化锆以单斜相和四方相２种相存在。微球的比表面积为２１ｍ６２／ｇ;总孔容为０．１２８０ｃｍ＾３／Ｌ;平均孔直径为８．６ｎｍ。氧化锆的表面存在酸碱两性。分别以异丙醇／环己烷,二氧甲烷／环己烷及三氯甲烷／环己烷为流动相研究了苯酚衍生物,芳香烃衍生物及苯胺等碱性化合物的保留行为。     

固体超强酸S2O8^2-／ZrO2-CeO2催化剂的结构与性能表征

用共沉淀法制备了固体超强酸S2O8^2-／ZrO2-CeO2催化剂,通过XRD,FTIR,BET,TEM,DSC／TG等分析手段对其结构进行了表征,并考察了其对乳酸丁酯合成反应的催化活性。结果表明．Ce的引入可以有效地抑制ZrO2晶粒由四方相向单斜晶相转变和催化剂表面含硫物种的流失;当焙烧温度高于500℃时,体系内部有四方相Ce0.16Zr0.84O2固溶体形成,最佳焙烧温度为600℃。在n（乳酸）：n（正丁醇）=1．0：3．0,。（S2O8^2-／ZrO2-CeO2）=12．0％,反应温度145℃,反应时间2．0h的条件下,S2O8^2-/ZrO2-CeO2催化剂对乳酸的酯化率达96．6％。     

合成甲醇,异丁醇锆系催化剂的晶相结构

用ＬＲＳ和ＸＲＤ相结合方法对Ｚｒ－Ｋ和Ｚｒ－Ｍｎ－Ｋ催化剂进行了。考察共沉淀法制备的Ｚｒ－Ｋ、Ｚｒ－Ｍｎ－Ｋ催化剂焙烧温度和Ｋ２Ｏ、ＭｎＯ２含量对其晶相结合的影响。在Ｚｒ－Ｋ催化剂中，ＺｒＯ２以单斜和四方混合晶型存在，在Ｚｒ－Ｍｎ－Ｋ催化剂中，当ＭｎＯ２含量在１７－３０％时，催化剂中仅有高度分散的四方晶型晶型ＺｒＯ２它是合成甲醇、异丁醇的活性相。     

超细ZrO3催化剂的织构和晶相结构对合成甲醇,异丁醇的影响

采用超临界干燥法制备ＺｒＯ２超细催化剂，用于一氧化碳加氢合成甲醇，异丁醇。考察了催化剂的焙烧温度，焙烧时间以及碱金属助剂对合成醇性能的影响，并结合Ｎ２吸附，ＴＥＭ，ＸＲＤ表征，研究催化剂的织构，体相结构与催化活性的关系。发现随着催化剂焙烧温度升高，焙烧时间的延长，ＺｒＯ２由四方晶型向单斜晶型转变；浸渍Ｋ２ＣＯ３在焙烧过程中能够稳定ｔ－ＺｒＯ２，浸渍Ｎａ２ＣＯ３则促进四方晶型向单斜晶型的转变。     

微量钛掺杂的纳米二氧化锆相变过程中的光学性质

微量钛掺杂的纳米氧化锆由于纳米“小尺寸效应”的影响,在材料中产生了过量的氧空位缺陷,这些氧空位缺陷使得氧化锆在室温下呈现出高温的四方相。这种晶相的变化对氧化锆的光学性质产生了很大的影响。在氧化锆从四方相向单斜相的转变过程中,位于470 nm位置的Ti发光中心的宽带发光以及相同位置的余辉发光得到了增强。     

ZrO_2晶相对MoO_x/ZrO_2催化剂结构及其甲醇选择氧化性能的影响

以纯的单斜氧化锆(m-ZrO2)和四方氧化锆(t-ZrO2)为载体,采用浸渍法分别合成了具有不同MoOx表面密度的MoOx/m-ZrO2和MoOx/t-ZrO2催化剂,并结合粉末X射线衍射,Raman光谱和H2程序升温还原等技术表征了不同ZrO2晶相对MoOx分散状态、结构以及甲醇氧化反应性能的影响.在低于锆表面MoOx的单层分散阈值(～5nm-2)时,m-ZrO2比t-ZrO2能够更有效地分散MoOx,形成高分散的孤立或二维结构的MoOx物种,避免了晶相MoO3的出现.当Mo表面密度超过单层分散阈值后,经过600℃焙烧,MoOx与ZrO2载体发生固相反应生成晶相ZrMo2O8,m-ZrO2比t-ZrO2更有利于ZrMo2O8的生成.提高Mo表面密度,催化剂表面的酸性随之增强,说明晶相ZrMo2O8比分散的MoOx物种具有更强的酸性.t-ZrO2与MoOx作用形成的强酸中心更有利于催化甲醇脱水生成二甲醚,但m-ZrO2使得MoOx具有更高的氧化还原能力和催化甲醇选择氧化反应的活性.ZrO2晶相对MoOx/ZrO2催化剂影响的研究结果将有助于研究VOx等其它金属氧化物催化剂以及发展酸性和氧化还原性双功能催化剂体系.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.