Bi—Mo—Nb复合氧化物催化作用机理的ESR和XPS研究

用ＥＳＲ对比研究了掺杂Ｎｂ对α－Ｂｉ２Ｍｏ３Ｏ１２催化剂丙烯还原和氧再氧化的影响，并用ＸＰＳ原位Ａｒ＾＋溅射研究了催化剂的还原与再氧化过程，观察了上述过程中催化剂内金属离子的价态变化和晶格氧的扩散现象，提出了Ｂｉ－Ｍｏ间通过晶格氧扩散所发生的氧化还原作用及模型，探讨了Ｎｂ＾５＋取代ＭＯ＾６＋产生的氧空位对加速晶格氧扩散所起的作用。     

V2O5—MoO3—SiO2表面复合氧化物催化剂的制备与表征

采用表面改性法制备了Ｖ２Ｏ５－ＳｉＯ２,ＭｏＯ３－ＳｉＯ２,Ｖ２Ｏ５－ＭｏＯ３－ＳｉＯ２复合氧化物催化剂,并用ＴＰＲ和ＩＴ技术研究了催化剂的表面结构及Ｖ＝Ｏ,Ｍｏ＝Ｏ的活性,同时用化学吸附ＩＲ技术研究了催化剂样品对异丁烷的化学吸附性能。     

Bi－Mo－Nb复合氧化物催化作用机理的ESR和XPS研究

用ＥＳＲ对比研究了掺杂Ｎｂ对α－Ｂｉ２Ｍｏ３Ｏ（１２）催化剂丙烯还原和氧再氧化的影响，并用ＸＰＳ原位Ａｒ＋溅射研究了催化剂的还原与再氧化过程，观察了上述过程中催化剂内金属离子的价态变化和晶格氧的扩散现象。提出了Ｂｉ－Ｍｏ间通过晶格氧扩散所发生的氧化还原作用及模型，探讨了Ｎｂ（５＋）取代Ｍｏ（６＋）产生的氧空位对加速晶格氧扩散所起的作用。     

甲烷部分氧化制甲醛催化剂MoO_3／SiO_2及MoO-3·MxOy／SiO_2的程序升温还原研究

利用程序升温还原（ＴＰＲ）方法，研究了甲烷部分氧化制甲醛催化剂ＭｏＯ３／ＳｉＯ２及添加金属氧化物的ＭｏＯ３·ＭｘＯｙ／ＳｉＯ２（Ｍ＝Ｖ、Ｆｅ、Ｎｉ、Ｃｒ、Ｃｕ）催化剂上，活性组分在载体上的分散及ＭｏＯ３与ＭｘＯｙ的相互作用．发现钼含量的提高不利于ＭｏＯ３在ＳｉＯ２上的分散，催化剂表面晶相ＭｏＯ３随钼含量的提高而增多．ＳｉＯ２上担载的活性组分有一个最佳值，对应于最佳催化活性．ＭｏＯ３·ＭｘＯｙ／ＳｉＯ２催化剂中ＭｏＯ３与ＭｘＯｙ发生了不同的相互作用，影响催化剂表面的活性氧物种，导致它们对甲烷氧化活性和甲醛选择性的不同．ＭｏＯ３·Ｖ２Ｏ５／ＳｉＯ２是比较好的催化剂，且Ｖ２Ｏ５添加量有最佳值，对应甲烷氧化制甲醛也有较高的活性和选择性．     

助剂Ag对Cr／γ—Al2O3氧化物催化剂CO氧化性能的影响

本文用硝酸盐水溶液等浸渍法制备了一系列Ｃｒ－Ａｇ／γ－Ａｌ２Ｏ３双金属及单金属的 物催化剂，测定了ＣＯ氧化转化率。用ＢＥＴ，ＸＲＤ，ＴＰＲ，ＴＰＤ－ＭＳ技术研究了助剂Ａｇ对Ｃｒ／γ－Ａｌ２Ｏ３催化剂ＣＯ氧化反应的作用。     

CO2部分氧化乙烷制乙烯Pd—Cu／MoO3—SiO2催化剂的研究

用化学吸附－红外光谱、化学吸附－程序升温脱附（ＴＰＤ）和微型反应技术研究了Ｐｄ－Ｃｕ／ＭｏＯ３－ＳｉＯ２（ＭｏＳＯ）催化剂对ＣＯ２和乙烷的吸附活化和部分氧化反应性能．结果表明，乙烷以Ｃ—Ｈ键中的Ｈ吸附于ＭｏＳＯ载体表面ＭｏＯ键的端基氧上；Ｐｄ－Ｃｕ／ＭｏＳＯ催化剂对ＣＯ２有良好的化学吸附活化性能，ＣＯ２的吸附除有线式吸附态和剪式吸附态外，还有一种新的卧式吸附态；Ｐｄ－Ｃｕ／ＭｏＳＯ催化剂的晶格氧参与了化学反应．探讨了在Ｐｄ－Ｃｕ／ＭｏＳＯ催化剂上ＣＯ２的部分氧化乙烷反应机理     

Br^—对（TPP）Co电化学氧化还原行为影响研究

用微电极和薄层循环伏安（ＣＶ）技术研究了Ｂｒ＾－对四苯基钴卟啉（ＴＰＰ）Ｃｏ）在１，２－二氯乙烷（ＤＣＥ）中电化学行为的影响，发现在较高电位下，两个Ｂｒ＾－轴向配位的（ＴＰＰ）Ｃｏ（Ⅲ）（Ｂｒ＾－）２其一个Ｂｒ＾－发生脱落表现出（ＴＰＰ）Ｃｏ（Ⅲ）（Ｂｒ＾－）的行为特征，这被证明是Ｂｒ＾－的氧化所致证明了（ＴＰＰ）Ｃｏ（Ⅲ）Ｂｒ＾－在约０．１２Ｖ（ＳＣＥ）处还原，而（ＴＰＰ）Ｃｏ（Ⅲ）（Ｂｒ＾－）     

Cs_yP_（1．33）－kMo_（12）SblCu_mV_nAs_kO_x催化剂的研究

以共沉淀方法制备了杂多酸盐催化剂ＣｓｙＰ１．３３－ｋＭｏ１２ＳｂｌＣｕｍＶｎＡｓｋＯｘ．利用ＩＲ及ＳＥＭ研究了催化剂的结构，ＤＳＣ研究了催化剂的稳定性，ＥＳＲ研究了催化剂的氧化还原性，及ＮＨ３－ＴＰＤ研究了催化剂的酸性．同时考察了催化剂对异丁醛一步氧化制甲基丙烯酸的催化性能，并与催化剂的氧化还原性进行了关联．发现Ｃｓ１．５Ｐ１．１３Ｍｏ１２Ｓｂ０．２５Ｃｕ０．２５Ｖ０．２５Ａｓ０．２０Ｏｘ催化剂使异丁醛氧化的目的产物甲基丙烯酸收率最高，达７０．１％．     

Mo/SiO2及V改性的Mo/SiO2催化剂的微孔特征及其对甲烷部分氧化合成甲醛反应的影响

在常压下评价Ｍｏ／ＳｉＯ２催化剂的制备条件对反应性能的，利用Ｎ２的吸附等温线计算了Ｍｏ－Ｖ／ＳｉＯ２催化剂的比表面积和孔径分布，进而讨论了不同的Ｖ加入量对Ｍｏ／ＳｉＯ２催化剂的微孔特征及其催化性能的影响，找到了适宜的Ｖ／Ｍｏ质量比及使甲醛收率最高的最佳孔径，通过ＸＲＤ和ＴＥＭ的测试分析讨论了制备条件对微观状态的影响和Ｖ与Ｍｏ之间的相互作用。     

MoO_2Br_2体系催化丁二烯聚合中烯丙基卤素的作用

ＭｏＯ２Ｂｒ２－Ａｌ（ｉ－Ｂｕ）２ＯＰｈＣＨ３（－ｍ）体系催化丁二烯１，２－聚合过程中添加Ｃ３Ｈ５Ｘ（Ｘ＝Ｃｌ、Ｂｒ和Ｉ）对聚合物分子量有较好的调节作用，其中以Ｃ３Ｈ５Ｂｒ的调节作用最强，Ｍｎ从１７．５×１０５降至３．５×１０５，但对催化活性有一定的影响．在测定催化体系的ＵＶ光谱、（１３）Ｃ－ＮＭＲ谱、聚合活性和聚合动力学参数的基础上，讨论了Ｃ３Ｈ５Ｘ在催化体系中的行为．     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.