基于碳纳米管修饰电极的胆碱电化学发光生物传感器研制

在碳纳米管(CNTs)和K3Fe(CN)6修饰的铂电极上吸附固定胆碱氧化酶,以鲁米诺为发光试剂,研制了胆碱电化学发光(ECL)生物传感器。CNTs可有效提高电极表面的电荷传输能力、提高电极表面的生物相容性和对酶分子的固载能力;K3Fe(CN)6对酶活性具有激活作用,同时对H2O2增敏的鲁米诺ECL有增强作用,均有利于提高传感器的检测灵敏度。研究表明,将CNTs分散液与K3Fe(CN)6混合,滴涂修饰在Pt电极上,吸附固定胆碱氧化酶,制备传感器。此传感器在含有8×10-6mol/L鲁米诺的磷酸盐缓冲液(pH7.4)、30℃条件下产生的ECL强度与胆碱浓度在1×10-7～4×10-3mol/L范围内呈线性关系,相关系数为0.994,检出限为1.2×10-8 mol/L。此生物传感器应用于鼠血样中胆碱的测定,测得结果为2.68 mg/L,平均回收率为101.1%。传感器具有快速、稳定和重现性好等特点,有望应用于常规分析。     

聚硫堇/亚铁氰根修饰碳糊电极的研制及其在维生素B6测定中的应用

采用循环伏安法在碳糊电极上通过共聚的方式电化学聚合制备了聚硫堇/亚铁氰根修饰碳糊电极(PTH/[Fe(CN)6]4-/CPE)。与聚硫堇修饰碳糊电极(PTH/CPE)相比,该修饰电极在4.5mol.L-1乙酸底液中,产生一对明显的氧化还原峰,表明Fe2+已被成功地引入聚合膜中。结果表明:PTH/[Fe(CN)6]4-/CPE对维生素B6具有明显的电催化氧化作用,在优化的试验条件下,测得维生素B6浓度在3.0×10-5～1.0×10-3 mol.L-1范围内与氧化峰电流呈线性关系,检出限(3S/N)为6.0×10-6 mol.L-1。修饰电极用于测定药物中维生素B6含量,回收率在94.5%～101%之间,测定结果的相对标准偏差(n=6)在1.8%～2.3%之间。     

氧化铜-过氧化聚吡咯-还原氧化石墨烯复合膜修饰电极非酶检测葡萄糖

先以氧化石墨烯(Graphen oxide,GO)为阴离子掺杂剂,采用电化学聚合法制备了聚吡咯-氧化石墨烯复合膜(PPy-GO)。分别在0.10 mol/L Na Cl和0.10 mol/L NaOH溶液中对其进行还原和过氧化处理,制得过氧化聚吡咯-还原氧化石墨烯复合膜(OPPy-ERGO)。再以此OPPy-ERGO复合膜为载体,采用电化学沉积法制备了氧化铜-过氧化聚吡咯-还原氧化石墨烯复合膜修饰电极(CuO-OPPy-ERGO/CCE)。通过扫描电镜和电化学方法对此电极进行表征,研究了葡萄糖在此修饰电极上的电化学行为。结果表明,此电极对葡萄糖的电氧化过程表现出高的催化活性和良好的抗干扰能力。在0.20 mol/L NaOH溶液中,安培法检测葡萄糖的线性范围为5.0×10~(-7)~1.0×10~(-3)mol/L,检出限(3Sb)为2.0×10~(-7)mol/L,灵敏度为121.8μA/(mmol·L~(-1))。该电极用于血清中葡萄糖含量的测定,加标回收率为96.0%~110.1%。     

聚次甲基蓝-多壁碳纳米管修饰玻碳电极测定叶酸

利用电聚合方法制备了聚次甲基蓝/多壁碳纳米管修饰玻碳(PMB/MWCNTs/GC)电极,该修饰电极对叶酸(FA)具有良好的电催化作用。结果表明,在最佳实验条件下,叶酸在-0.51V处的还原峰电流与其浓度在3.4×10-6～1.1×10-4 mol/L之间呈良好线性关系,检出限为1.6×10-6 mol/L。用标准加入法做了回收实验,回收率在90.8%～101%之间。该电极制备简单,有良好的稳定性。     

石墨烯-壳聚糖修饰电极构建石杉碱甲免疫传感器

通过将石杉碱甲抗体(anti-HupA)固定到由还原态氧化石墨烯/壳聚糖(r GO/CS)复合膜修饰的玻碳电极表面,制备高灵敏度的电化学免疫传感器,利用石杉碱甲抗原抗体特异性反应可阻断[Fe(CN)6]3-/4-氧化还原反应体系电子转移的特点,建立了检测石杉碱甲(Hup A)的电化学免疫传感器分析方法。采用循环伏安法(CV)、交流阻抗法(EIS)及差示脉冲伏安法(DPV)研究Hup A在[Fe(CN)6]3-/4-氧化还原体系的电化学行为,利用DPV法测定Hup A浓度。在优化条件下,15 mmol/L K3[Fe(CN)6]+0. 1 mol/L KCl+0. 1 mol/L PBS(pH 6. 5)测试体系中,Hup A浓度的对数与峰电流差值在1. 0×10-13~1. 0×10-10mol/L范围内呈良好的线性关系,相关系数(r)为1. 000 0,检出限为3. 0×10-14mol/L,回收率为99. 4%~102%。该方法具有特异性强、灵敏度高、操作简单、绿色环保等特点,可用于中药材中石杉碱甲浓度的快速检测。     

硫酸特布他林分子印迹电极的制备与性能研究

采用分子印迹技术,以邻苯二胺为功能单体,在玻碳电极表面电聚合成聚邻苯二胺分子印迹敏感膜。K3[Fe(CN)6]作为探针分子,通过循环伏安法、差分脉冲法对该电极进行考察。结果表明:电极对硫酸特布他林具有较好的灵敏度与选择性,线性范围为1.52×10-8~1.05×10-6mol/L,检出限(S/N=3)为1.2×10-8mol/L,电极具有良好的重现性与稳定性。将电极用于实际样品的分析,方法回收率为98.4%~107.9%。     

多壁碳纳米管-分子印迹传感器测定盐酸克伦特罗

结合碳纳米材料和分子印迹技术,建立了以K3[Fe(CN)6]为探针测定盐酸克伦特罗的方法。以邻苯二胺为功能单体,盐酸克伦特罗为模板,采用电化学聚合法在多壁碳纳米管修饰电极表面制备了分子印迹薄膜。用乙腈水溶液可快速去除模板,得到多壁碳纳米管-分子印迹传感器。用循环伏安法、交流阻抗法和石英晶体微天平技术对印迹膜进行了表征,膜厚为12.3 nm。K3[Fe(CN)6]的相对峰电流与盐酸克伦特罗的浓度在4.0×10-8～6.6×10-6 mol/L范围内呈线性关系,检测限为8.1×10-9 mol/L。选择性实验表明传感器对结构类似物具有较强的抗干扰能力。此传感器可用于猪肉中盐酸克伦特罗的测定,加标回收率为101.3%～107.9%。     

金纳米粒子-过氧化聚吡咯-碳纳米管复合膜修饰电极同时测定对苯二酚和邻苯二酚

将多壁碳纳米管(MWCNTs)滴涂于复合陶瓷碳电极(CCE)表面,采用电化学方法在碳纳米管表面逐层沉积过氧化聚吡咯(OPPy)和金纳米粒子(AuNPs),制得金纳米粒子-过氧化聚吡咯-多壁碳纳米管复合膜修饰电极(AuNPs-OPPy-MWCNTs/CCE).采用扫描电镜和电化学方法对修饰电极进行了表征.在0.10 mol/LPBS (pH 7.0)缓冲溶液中研究了对苯二酚(HQ)和邻苯二酚(CC)在修饰电极上的电化学行为.结果表明,修饰电极对HQ和CC的电极过程具有良好的电化学响应和区分效应.基于此建立了一阶导数伏安法同时测定HQ和CC的方法,HQ和CC的线性范围均为2.0×10-7～ 1.0×10-4 mol/L,检出限分别为6.0×10-8 mol/L和8.0×10-8 mol/L(S/N=3).模拟水样中的加标回收率分别为96.2％～99.8％ (HQ)和96.0％～100.0％,表明本方法具有良好的实用性.     

以碳纳米管为支撑电沉积制备高电活性与电催化性能的六氰合铁酸钴纳米多孔薄膜

以碳纳米管(MWNTs)修饰的碳糊电极为基底电极,通过电沉积方法制备了六氰合铁酸钴(CoHCF)纳米多孔生物传感平台。考察了MWNTs对CoHCF沉积的影响,优化了CoHCF沉积的各种实验条件(0.5mol/L KCl,1 mmol/L CoCl2和0.9 mmol/L K3Fe(CN)6混合溶液,在循环伏安电压范围0～1.1 V内扫20圈,扫速100 mV/s),借助循环伏安法、交流阻抗法和扫描电镜法对修饰电极进行了表征。由于MWNTs的支撑作用,电沉积得到的CoHCF呈现出多孔结构和良好的电化学稳定性。具有纳米多孔结构的MWNTs-CoHCF薄膜能有效地促进生物小分子在电极上的电子交换,维生素B2在纳米多孔CoHCF/MWNTs上具有优异的氧化还原行为,其测定线性范围为1.2×10-7～2.6×10-7mol/L,检出限为8.9×10-8mol/L。     

异丙隆分子印迹敏感膜传感器

在弱酸(pH 5.5)条件下,采用电聚合法在金电极上制备邻氨基酚异丙隆分子印迹膜,对该印迹膜的性能、分子印迹效应和印迹膜对模板分子及其结构相似物的选择性响应等进行了研究.以K3Fe(CN)6为印迹电极和底液间的探针,建立了一种检测异丙隆的方法.该传感器对异丙隆具有良好的选择性和敏感度,异丙隆浓度在1.0×10-7～4.0×10-4 mol/L范围内与K3Fe(CN)6还原峰电流减少量呈线性关系; 检出限为2.95×10-8 mol/L.对农田水中异丙隆含量进行了测定,回收率为99.0%～102.0%.     

Pencil Lead Electrode Modified with Hemoglobin Film as a Novel Biosensor for Nitrite Determination

In the present paper, the electrochemical reduction of nitrite at a hemoglobin modified pencil lead electrode (Hb/PLE) is described. The electrochemical properties of nitrite were studied by cyclic voltammetry and chronoamperometry. Results showed that the hemoglobin film has an excellent electrochemical activity towards the reduction of nitrite. By using voltammetric and chronoamperometric methods, α, n_α and n were calculated. Then the ability of the electrode for nitrite determination was investigated using differential pulse voltammetry. The electrocatalytic reduction peak currents were found to be linear with the nitrite concentration in the range from 10 to 220 µM with a detection limit of 5 µM. The relative standard deviation is 2 % for 3 successive determinations of a 100 µM nitrite solution. This modified electrode was successfully used for the detection of low amounts of NO₂^? in spinach sample and a spiked sample of tap water.     

亚硝酸根在纳米金修饰玻碳电极上的电催化氧化行为及其测定

采用直接电化学沉积法制备出纳米金修饰玻碳电极,研究了其对亚硝酸根的电催化氧化作用。结果表明,亚硝酸根在该修饰电极上于0.8 V处出现了一个良好的氧化峰。在最优实验条件下,亚硝酸根的峰电流与其浓度在2×10-6～2×10-3mol/L范围内呈一定的线性关系,检出限为6.0×10-7(S/N=3),提出了用循环伏安法测定亚硝酸根的方法。纳米金修饰电极用于东莞自来水水样中亚硝酸根的测定,回收率在98.1%～101.4%之间。对比本方法,用分光光度法对东莞自来水样中亚硝酸根进行了测定,结果满意。     

聚铬黑T修饰电极检测亚硝酸盐的研究

利用电化学聚合法将铬黑T修饰到玻碳电极表面,制得聚铬黑T修饰电极。该修饰电极对亚硝酸盐的电化学氧化具有明显的催化作用,这种催化作用主要是由于聚铬黑T薄膜与带负电荷的亚硝酸盐离子的静电相互作用,导致亚硝酸盐离子富集在电极表面/溶液界面,显著增强了亚硝酸盐的氧化电流。电子传输系数α为0.735。选用0.85V作为工作电压,对亚硝酸盐进行安培检测,在0.05μmol/L～1.0 mmol/L和1.0～20.0 mmol/L两个浓度范围内呈现良好的线性关系,检测限达到0.01μmol/L。且该修饰电极有良好的重现性和稳定性。将该修饰电极用于泡菜中亚硝酸盐的测定,获得了满意的结果。     

A Sensitive and Selective Nitrite Detection in Water Using Graphene/Platinum Nanocomposite

A glassy carbon electrode modified with reduced graphene oxide and platinum nanocomposite film was developed simply by electrochemical method for the sensitive and selective detection of nitrite in water. The electrochemical reduction of graphene oxide (GO) efficiently eliminates oxygen‐containing functional groups. Pt nanoparticles were electrochemically and homogeneously deposited on the ErGO surface. Field emission scanning electron microscopy (FE‐SEM), Raman spectroscopy, attenuated total reflectance‐fourier transform infrared spectroscopy (ATR‐FTIR), electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV) were used to examine the surface morphology and electrocatalytic properties of the Pt‐ErGO nanocomposite film‐modified electrode surface. The fabricated nitrite sensor showed good electrochemical performance with two linear ranges; one from 5 to 100 µM (R²=0.9995) and the other from 100 to 1000 µM (R²=0.9972) and a detection limit of 0.22 µM. The proposed sensor was successfully applied for the detection of nitrite in tap water samples which proves performance of the Pt‐ErGO nanocomposite films.     

Electrochemical determination of nitrite via covalent immobilization of a single-walled carbon nanotubes and single stranded deoxyribonucleic acid nanocomposite on a glassy carbon electrode

A novel method has been developed for determination of nitrite by modifying the surface of a glassy carbon electrode (GCE) using single-walled carbon nanotubes with covalently immobilized single-strand deoxyribonucleic acid. The modified electrodes were characterized by field emission scanning electron microscopy, X-ray photoelectron spectroscopy, and electrochemical techniques. The results demonstrate that the nanotube-DNA nanocomposite has been successfully immobilized on the surface of the GCE. The new electrode, under optimum conditions at room temperature, exhibits excellent electrocatalytic activity towards the oxidation of nitrite, with a significantly reduction of the overpotential. The linear range for the detection of nitrite is from 0.6 to 540 μM, with a sensitivity of 0.216 μA?μM^?1, and a detection limit as low as 0.15 μM. The electrode showed good reproducibility and high stability and was successfully used to analyze nitrite in water and sausage samples.     

Activated Copper Cathodes as Sensors for Nitrite Analysis

The increased surface area of copper electrodes upon applying a suitable potential protocol was characterized by atomic force microscopy images. Scanning electrochemical microscopy was used to demonstrate the enhanced reactivity of the generated surface. The modified electrode showed excellent catalytic activity towards nitrite reduction in acidic medium (pH 2). This new platform was used in the development of a fast and simple voltammetric method for nitrite determination. Commercial and rainwater spiked samples were analyzed and the data showed an excellent agreement with those obtained with a reference spectrophotometric method (Griess reaction) at a confidence level of 95 % (Student’s t‐test).     

二氧化锆/石墨烯复合材料对亚硝酸盐的电化学传感研究

制备了一种二氧化锆/还原氧化石墨烯(ZrO2NPs/rGO)复合材料修饰电极的亚硝酸盐电化学传感器,并成功用于亚硝酸盐的检测.采用循环伏安法和电流-时间曲线考察了修饰电极的电化学行为.实验结果表明,ZrO2NPs/rGO复合材料修饰电极对亚硝酸盐具有良好的电流响应.在最优实验条件下,电流-时间曲线中的电流响应信号与亚硝酸盐浓度在3.0×10Symbolm@@_7～1.0×10Symbolm@@_6 mol/L和1.0×10Symbolm@@_6～6.0×10Symbolm@@_6 mol/L的范围内呈良好的线性关系,检测限为1.0×10Symbolm@@_7 mol/L(S/N 3).该传感器灵敏性高、稳定性和重现性好.使用此传感器检测实际样品香肠中的亚硝酸盐的回收率为93.7％～110.4％,相对标准偏差为1.6％～2.1％.     

Development of Pen-type Portable Electrochemical Sensor Based on Au-W Bimetallic Nanoparticles Decorated Graphene-chitosan Nanocomposite Film for the Detection of Nitrite in Water,Milk and Fruit Juices

The development and fabrication of a simple, portable, and sensitive detection tool to precisely monitor nitrite level is of growing importance in electrochemistry research, given the strong interest in the protection of drinking water quality, treatment of wastewater, food production, and control of remediation processes. This work describes the fabrication of a simple, cost-effective, pen-type electrochemical sensor based on bimetallic gold and tungsten nanoparticles electrochemically decorated on graphene-chitosan modified pencil graphite electrode (PGE) for the trace detection of nitrite in real samples. The prepared nanocomposite was characterized using XRD, SEM, and EDS. The electrochemical behavior of the sensor was evaluated by cyclic voltammetry (CV) and impedance electrochemical spectroscopy (EIS). Results revealed that the proposed sensor displayed excellent electrocatalytic activity towards electro-oxidation of nitrite with an irreversible redox reaction. The AuNPs-WNPs@Gr-Chi/PGE sensor exhibited excellent analytical performance with a wide linear range from 10 to 250 μM towards nitrite. The LOD and LOQ were calculated to be 0.12 μM and 0.44 μM, respectively. The designed electrochemical sensor was successfully applied for the detection of nitrite in water, milk, and natural fruit juice samples.     

Electrochemical determination of nitrite and iodate based on Pt nanoparticles self-assembled on a chitosan modified glassy carbon electrode

A promising electrochemical sensor was fabricated by the self-assembling of Pt nanoparticles (nano-Pts) on a chitosan (CS) modified glassy carbon electrode (GCE). A field-emission scanning electron microscope (FE-SEM), transmission electron microscopy (TEM) and electrochemical techniques were used for characterization of these composites. It has been found that nano-Pts are inserted into the CS layer uniformly, and have a larger surface area compared to the chitosan modified glassy carbon electrode. Electrocatalytic experiments for the oxidation of nitrite and the reduction of iodate have shown that nano-Pts/CS/GCE can decrease the over-potential and increase the faradic current, which can be used for the sensitive determination of nitrite and iodate. Moreover, the prepared modified electrode exhibits good reproducibility and stability, and it is possible that this novel electrochemical sensor can be applied in the sensing and/or biosensing field.