几种导电聚合物热分解行为的直接裂解质谱研究

本文用直接裂解低能电子轰击电离和化学电离质谱(DPMS)等方法研究了聚对苯硫醚(PPS).聚噻吩(PT)和聚苯胺(PAn)的热分解行为和某些结构性质, 能提供多至7个链节重复单元的裂解碎片.结果表明: 几种聚合物的热分解均以自由基方式降解,PPS形成环状和线状齐聚物,PT和PAn只能形成线状齐聚物.     

聚甲醛的催化裂解-气相色谱质谱分析

本文利用催化裂解-气相色谱/质谱分析技术(CP-GC/MS),对聚甲醛及共聚甲醛进行链结构分析及裂解机理的探讨。 实验部分 (一)仪器与试样 1.日本岛津PYR-2A型管式炉裂解器,日立633型气相色谱仪,M-80质谱,M-003计算机处理机。2.试样:上溶厂     

绝缘聚合物对聚苯胺复合物导电性能的影响

将十二烷基苯磺酸掺杂的聚苯胺(PAn DBSA)与乙烯丙烯酸共聚物(EAA)或聚烯烃弹性体(POE)进行溶液共混制得了PAn DBSA/EAA或PAn DBSA/POE导电复合物。研究了绝缘聚合物的化学结构对聚苯胺导电复合物形态结构及电性能影响。结果表明,极性聚合物EAA中的羧基能与PAn形成氢键并发生掺杂作用,复合物中卷曲的PAn主链能充分展开,导致PAn/EAA复合物具有非常低的逾渗域值(1.5%),PAn含量为20.0%时,电导率高达7.1S/cm。POE为非极性共聚物,与极性较强的PAn相容性较差,导致PAn/POE复合物具有较高逾渗域值(5.0%),PAn含量为20.0%时,电导率仅为3.0×10-5S/cm。     

可溶性聚苯胺的合成及研究

本文报道了可溶性聚苯胺(PAn)的合成方法。通过对比可溶和不可溶PAn的导电性、电化学行为及IR光谱,说明它们的分子链基本结构相同。并测得了PAn在DMF-d_7中的~13C-NMR 谱。     

裂解色谱与裂解质谱对高分子分析的评价

本文报导了在日立 M-80型气相色谱/质谱仪上装上CDS Pyroprobe 100型裂解器,组成既能做裂解色谱/质谱(Py-GC/MS),又能做裂解质谱(Py-MS)的分析裂解系统,通过对一系列的高分子裂解试验,评价了二者的性能。     

Py—GC／MS在VDF／CTF共聚物链段结构和其裂解机理研究上的应用

用高分辨裂解气相色谱－质谱联用技术（Py-GC/MS）分析了VDF／CTFE（1：4）链段结构和裂解机理。通过对实验条件的选择,找出了一套适合于VDF／CTFE（1：4）共聚物的实验操作条件,且表明在此条件下所得的裂解谱图的重现性非常好。讨论了该共聚物具有无序的链段结构特征;确定此共聚物裂解机理为解聚断裂生成单体,还伴随有主链断裂形成低聚物。     

聚苯胺/顺丁橡胶复合导电膜的制备与性能(Ⅱ)

采用再掺杂方法制得了樟脑磺酸掺杂的聚苯胺(PAn-CSA),用溶液共混法制备PAn／BR导电复合膜．研究了聚苯胺与顺丁橡胶(BR)复合膜在间甲酚二次掺杂前后电导率的变化。实验表明:CSA对聚苯胺有较好的掺杂作用;二次掺杂使PAn复合膜电导率明显提高,其导电渗滤阈值略有降低,使卷曲的二次掺杂PAn链展开并通过分子链间的相互作用而自行组成导电通路．     

裂解气相色谱-质谱联用法分析聚醚酰亚胺的裂解产物

应用裂解气相色谱及质谱联用法研究了3种聚醚酰亚胺(PEIM′s)的裂解行为,并根据裂解产物的结构及其相对产率推断了裂解的机理。取3种PEIM样品置于石英裂解管中,分别在550℃,650℃,750℃条件下裂解,所得产物用气相色谱-质谱联用法分析。分析中采用DB-5毛细管色谱柱,电子轰击离子源(200℃,70eV)及在m/z 29～500范围内全扫描方式,并用NIST谱库进行检索和用归一化法计算峰面积进行定量。由试验结果可知:选择在750℃进行裂解较好,在此条件下获得主要裂解产物存在的更明显的信息,有利于对产物进行详细分析和鉴定。     

基体辅助激光解吸电离飞行时间质谱和热裂解色谱/质谱研究聚酯型聚氨酯链结构

聚酯型聚氨酯样品用基体辅助激光裂解离子化质谱(MALDI-TOF/MS)和热裂解色谱质谱(PYGC/MS)方法进行了鉴定,PYGV/MS方法可检出PU的一些组成单元的化学结构,但PYGC/MS中大多数的峰,无法从常规的标准化合物的质谱数据库中检索到,而MALDI-MS方法,可明确测出PU试样各种单元的组合、聚合度及PU长链的序列分布,质量数范围可达2300.     

Py-GC/MS在VDF/CTFE共聚物链段结构和其裂解机理研究上的应用

用高分辨裂解气相色谱 质谱联用技术 (Py GC/MS)分析了VDF/CTFE(1∶4)链段结构和裂解机理。通过对实验条件的选择 ,找出了一套适合于VDF/CTFE(1∶4)共聚物的实验操作条件 ,且表明在此条件下所得的裂解谱图的重现性非常好。讨论了该共聚物具有无序的链段结构特征 ;确定此共聚物裂解机理为解聚断裂生成单体 ,还伴随有主链断裂形成低聚物     

Direct mass spectrometry of polymers. X. Primary thermal fragmentation processes in totally aromatic polyesters

The thermal decomposition of a series of isomeric poly-(oxphthaloyloxyphenylenes) (I–IV) and poly(m-hydroxybenzoic acid) (V) was studied by Direct Pyrolysis–Mass Spectrometry. The results indicate that intramolecular exchange reactions predominate in the primary thermal fragmentation processes, causing the formation of cyclic oligomers which are subsequently cleaved to open-chain fragments. The size and relative abundance of the cycles produced appear to be strongly influenced by steric factors, i.e., by the structure (para or meta) of the repeating unit in each polymer. Remarkably, in the case of poly(m-hydroxybenzoic acid) the formation of cyclic oligomers containing up to seven repeating units is observed.     

环取代基对金属化聚苯胺衍生物膜修饰电极性能的影响

通过比较聚2，5－二甲氧基苯胺（PDMAn）、聚邻甲基苯胺（POT）和聚间氯苯胺（PmClAn）膜修饰电极的氧化还原电位、沉积在这3种聚合物上的铂微粒的表面形态与晶面取向以及异丙醇在分散Pt微粒的聚苯胺膜修饰电极上的氧化行为，从电子效应和立体效应探讨了聚合物电化学性质与环取代基的关系以及不同聚合基质对Pt沉积机理和有催化性能的影响,结果表明，在硫酸溶液中PDMAn膜修饰电极的氧化还原电位最负、POT次之、PmClAn最正，Pt在PDMAn和POT膜上的电沉积机理与在PmClAn膜上的不同，聚合物膜上沉积的Pt微粒呈现（200)晶面择优取向，其中POT膜上择优取向度最大，PDMAn次之，Pm-ClAn最小，异丙醇在金属化聚合物膜电极上的氧化电位取决于聚苯胺的本质，在POT膜修饰电极上异丙醇的电氧化主要发生在POT的活性电位区，而在PDMAn与PmClAn膜上的电氧化则主要发生在Pt上的氧化电位区，说明聚合物膜不仅作为Pt微粒的分散介质，而且本身有产生催化作用。     

Mechanism of the Anionic Ring-Opening Oligomerization of Propylene Carbonate Initiated by the tert-Butylphenol/KHCO3 System

The ring-opening oligomerization reaction of propylene carbonate in the presence of the tert-butylphenol/KHCO₃ initiating system was studied by means of Matrix-Assisted Laser Desorption/Ionization Time of Flight Mass Spectrometry (MALDI-TOF MS) and Electrospray Ionization Time of Flight Mass Spectrometry (ESI-TOF MS). According to the MS spectra obtained, different series of peaks were identified. The MS spectra clearly showed that besides the chain-extension reaction yielding oligomers with all propylene oxide units, the formation of oligomers containing carbonate linkages in the chain, and condensation reaction between the latter two also took place. The structure of the oligomers carrying carbonate linkages was determined by the post-source decay (PSD) MALDI-TOF MS/MS method. Based on the MS results, a mechanism for the oligomerization reaction is proposed.     

An infrared and Raman spectroscopic study of polyanilines co-doped with metal ions and H+

Polyanilines doped with (HCl+KCl) and (HCl+CoCl2) were prepared by co-doping method, respectively. For comparison, polyaniline emeraldine salt (ES) by doping with HCl and its emeraldine base (EB) form were also synthesized. The co-doped polyanilines, ES and EB samples were all characterized by Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy aiming to understand the transformations in the different doping status. The results show that the doping degree of K+ ions is considerably higher than that of Co2+ ions under the same co-doping conditions possibly due to different pseudoprotonation constants of EB with K+ ions and Co2+ ions. Moreover, morphology difference of polyaniline co-doped with alkaline metal ions or transition meal ions may arise from different coordination geometry of metal ions. Nevertheless, there are similar chemical transformations of quinoid units to benzenoid ones on polyaniline backbones for the ES and both co-doped samples. And the polyaniline backbones co-doped with H+ and metal cations are found to attain weaker charge delocalization than the ES which is doped solely with H+.     

The effect of heating on polyaniline powders studied by real-time synchrotron radiation diffraction,mass spectrometry and thermal analysis

The effect of heating on four chemically synthesized polyanilines, three of which were doped by HCI, H₂SO₄, HCIO₄, and one sample which was dedoped, was investigated. The structural variations during thermal decomposition were studied by real-time synchrotron radiation diffractometry and correlated with mass spectrometry (MS), thermal gravimetry (TG), and differential thermal analysis (DTA). These macroscopic and microscopic techniques were combined in order to shed more light on the role played by the water and the counteranion molecules on the structure of doped polyaniline. Evidence for two H₂O fractions was found for HCI-doped polyaniline. Chain degradation was observed for HCIO₄ and H₂SO₄-doped polyaniline. The results indicate that intermediate sulphonation of polymer chains occurs in the latter case.     

Oxidation state and proton doping level in copolymers of 2-aminobenzoic acid and 2-methoxyaniline

UV-vis spectra of homopolymers and copolymers of 2-aminobenzoic acid (OAB) and 2-methoxyaniline (OMA) were analyzed in order to obtain information about the oxidation state and proton doping level of these polymers. Dimethyl sulfoxide (DMSO) was used as a solvent in which protonated forms of polyanilines are preserved and a mixture of N-methyl-2-pyrrolidone and triethylamine (0.5 %) as a solvent (NMP/TEA) in which polyanilines are assumed to be non-protonated. Polymers were prepared in the emeraldine salt form, externally doped with HCl. It was found that only external doping is eliminated in NMP/TEA while internal doping by carboxylate groups bound in OAB units remains operative. Since doped quinoid units do not contribute to the quinoid band (Q-band at 630 nm), the intensity ratio of the Q-band and benzenoid band (B-band at 320 nm) cannot be simply correlated with the oxidation state of poly(OMA-co-OAB) copolymers in contrast to poly(OMA) and polyaniline. Spectra of copolymers with less than 60 % of OMA units as well as those of poly(OAB) in DMSO and NMP/TEA are almost identical due to internal doping, which is proposed to lead to structures in which main-chain protons are coulombically bound with immobile carboxylate anions. In the spectra of copolymers with less than 60 % of OMA units, a well-resolved band occurs at 500 nm, which can be ascribed to alternating or close-to-alternating sequences of OMA and OAB units.     

Effect of ionizing radiation on polyaniline solutions

This communication presents the optical studies associated with transition doped (metallic)-neutral (semiconductor or insulator) state for conducting polymers. Special attention is focused on the electronic properties of polyaniline. The interconversion of different oxidation states of polyanilines has been studied by chemical and radiolytic methods. The polyaniline system is described by three sets of chromophores of three different oxidation states: fully reduced leucoemeraldine base (LB), partially oxidized emeraldine base (EB), and fully oxidized pernigraniline (PB). Each oxidation state can exist in its protonated form by treatment with an acid. All members of polyaniline family are spectroscopically distinguishable. The radiolytic study presents evidence that the polyaniline can exist in a continuum of oxidation states. The highly conducting form of polymer, i.e. emeraldine salt can be converted by using ionizing radiation into leucoemeraldine salt. The leucoemeraldine base is the final product of radiolysis of emeraldine base solution. The fully oxidized form of polyaniline can also be obtained by the irradiation of EB in the presence of CCl₄ or chlorobenzene.     

Application of thermal analysis and pyrolysis coupled to GC/MS in the qualification of simvastatin pharmaceutical raw material

The simvastatin (SV) is nowadays produced semi-synthetically from lovastatin. It’s one of the statins most commonly used to treat several forms of hypercholesterolemia. This study aimed to apply the thermal characterization of the SV raw material using thermoanalytical techniques and its degradation products by Pyrolysis coupled to Gas chromatography/Mass spectrometry (Pyr-GC/MS). It was studied three samples of SV (SVA, SVB, and SVC). The results showed thermal behavior differences of the samples during the melting process transition and the activation energies (E _a) of the thermal decomposition, which were correlated to the thermal stability of them. The first decomposition step of Pyr-GC/MS showed two new compounds of m/z 284 and 207, in proportions dependents according to the pyrolysis temperature.     

Optically active electrochromism in polyanilines

The electrochemically driven control of the natural optical activity of polyanilines bearing chiral camphorsulfonic acid is reported. Aniline was polymerized in the presence of camphorsulfonic acid by oxidative electrochemical polymerization in water to afford polyanilines containing (+)- or (−)-camphorsulfonic acid. This research elucidated that the polymerization, with cyclic voltammetry scanning up to 1.1 V, produced consistent optically active polyanilines. The polyaniline films thus prepared showed intense and tunable optical activity based on electrochemical reduction/oxidation in a 0.1 M sulfuric acid aqueous solution. The circular dichroism and optical rotation angle of the polymer were tunable by the appropriate adjustment of an externally applied potential as a form of optical modulation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2085–2090, 2007     

Additive‐dependent iptycene incorporation in polyanilines: Insights into the pentiptycene clipping effect and the polymerization mechanism

Despite the long history of polyaniline chemistry, backbone‐substituted polyanilines are limited. Here, we report the synthesis of pentiptycene‐incorporated polyanilines through acidic aniline oxidative polymerization with three pentiptycene derivatives, TA, DA, and TP, as nucleate additives. The reactivity of TA > DA ? TP, as evidenced by structural and property analysis of the corresponding polyaniline products, demonstrates a radical coupling mechanism and the formation of Dewar π‐complex intermediates for the chain propagation. In addition, the iptycene substituent effect on enhancing the electrochemical stability and charge storage capability of polyaniline are discussed with a clip model, namely, the threading of neighboring polyaniline chains through the U‐ and V‐shaped cavities of pentiptycene restricts lateral motions of the polymer chains and promotes interchain conductivity. Density function theory (DFT) calculations suggest a larger clipping effect for the U versus V cavities. Both the conclusion of a terminal planar p‐phenylenediamine (ppda) group being the key component of an effective nucleate and the concept of interchain clipping for enhanced electrochemical performance should facilitate the design and synthesis of novel polyanilines for electronic applications.