氧负离子自由基与乙烯反应机理的计算研究

在G3MP2B3理论水平下研究了氧负离子自由基(O^－)与乙烯(C₂H₄)的反应机理. 计算结果表明, O^－与C₂H₄经碰撞快速复合形成离子诱导偶极络合物中间体, 然后经历异构化、解离生成各种产物, 分别对应分子离子异构解离与复合电子剥离反应通道. 通过比较各个反应途径上势垒的相对高度, 发现主要产物通道为复合电子剥离通道, 相应的中性产物主要为c-C₂H₄O; 而分子离子解离通道的通道分支比较小, 其中生成水反应通道相应的阴离子产物主要是CH₂＝C^－. 当前的计算证实了以往实验观察的结论.     

白光及紫外光辐照下甲氨碘化铅基钙钛矿太阳能电池降解机制差异

本工作实验对比了可见光以及紫外光辐照下甲氨碘化铅(CH₃NH₃PbI₃即MAPbI₃)基钙钛矿太阳能电池器件性能及微结构演变特征差异. 结果表明可见光辐照下钙钛矿太阳能电池器件中MAPbI₃层发生降解的同时, 伴随着Au元素从金属电极一侧向MAPbI₃和电子传输层SnO₂的界面处迁移现象. 但相较于紫外光, 可见光辐照下器件中Au元素的迁移速率慢30倍左右. 这是由于器件电子传输层SnO₂具有较低的价带顶位置(–8.4 eV), 它吸收紫外光激发出强氧化性的空穴h⁺, 氧化碘离子I^–生成I原子. 而I原子会对金属电极层产生较大的破坏作用, 促进Au⁺离子的形成. 因此可见光辐照下, 尽管器件开路电压V_oc一直保持较高的数值, 但是Au元素的迁移以及钙钛矿层的分解, 会引起短路电流密度J_sc的快速降低. 本文为钙钛矿太阳能电池光照不稳定性的机理解释, 提供了全新的理论依据.     

锗硅烯与CH3OH加成反应机理及区域选择性

采用密度泛函理论方法,在B3LYP/6-311++G(d, p)水平,研究了几种锗硅烯与CH₃OH的加成反应的微观机理和势能剖面,分析了锗硅烯中Si=Ge双键的极性对加成反应区域选择性的影响.研究结果表明,锗硅烯可分别与CH₃OH的单聚体或二聚体发生加成反应.所有加成反应均从初始亲核或亲电复合物的形成开始.母体锗硅烯H₂Si=GeH₂与CH₃OH二聚体的加成反应比其与CH₃OH单聚体的相应反应在动力学上更容易些,但在其它锗硅烯与CH₃OH的反应中情况则相反.用Ph或SiMe₃基团取代H₂Si=GeH₂中的H原子在动力学上使反应变得不利且SiMe₃基团的影响更显著.加成反应的区域选择性与锗硅烯中Si=Ge双键的极性以及Si-O(Ge-H)和Ge-O (Si-H)键的相对强弱都有关.     

亚微米级多刺状星形氧化铜的制备

在阳离子gemini表面活性剂[C₁₆H₃₃(CH₃)₂N^＋(CH₂)₄N^＋(CH₃)₂C₁₆H₃₃]•2Br^－ (16-4-16)存在条件下, 以六次甲基四胺为沉淀剂, 利用水热合成法制备了大量多刺状星形亚微米级氧化铜. 用X射线衍射(XRD), X射线光电子能谱(XPS), 扫描电子显微镜(SEM)和透射电子显微镜(TEM)等多种手段对制备产物的表征结果表明, 所得产物是具有单斜结构多刺状星形氧化铜. 考察了表面活性剂浓度、温度以及铜源对产物物相及其形貌的影响.     

中间体C60(CH3)-和产物C60(CH3)2的结构及产物

用INDO系列方法对C₆₀^2-与CH₃反应的中间体C₆₀(CH₃)^-进行理论研究,得到具有Cs对称性的构型。结果表明,CH₃加成到C₁₅上,将使与其相邻的双键碳(C₃₀)的电荷密度和自旋密度达极大值,故加成反应部位在C₃₀处;另外,C₁₅的对位C₁₂(或C₂₇)也较其它部位易于反应,且有两个反应场所,因而产物C₆₀(CH₃)₂可能为六元环上的1,2-加成和1,4-加成两种异构体的混合物。同时对两种加成产物的结构和电子光谱进行了理论研究,指认其电子跃迁,并讨论了其光谱红移的原因。     

羟基氧化铟团簇与二氧化碳和甲烷作用的密度泛函理论研究

二氧化碳(CO₂)和化石能源气体燃料甲烷(CH₄)均是化学稳定、 温室效应较大的分子, 因而对其活化、 转化和利用的研究具有显著的理论和实际意义. 本文采用密度泛函理论方法, 计算研究了羟基氧化铟团簇与CO₂, CH₄和(CO₂+CH₄)的作用. 结果表明, 氧化铟团簇通过其活性位点—In—O(桥氧)—对CO₂和CH₄分子进行[2+2]加成活化, 而羟基的引入调变了氧化铟团簇活性位点上的局部电荷, 显著降低了其与CO₂和CH₄分子作用的活化自由能垒, 使得CO₂和CH₄分子的活化变得容易进行. 活性位点—In—O(桥氧)—中的In, O上的局部电荷差值(q_In－q_O)越大, 其对CO₂和CH₄分子作用的活化自由能垒越低. 羟基氧化铟与CO₂和CH₄分子作用时, 电子由羟基氧化铟流向CO₂和CH₄分子(亲核活化); 而羟基引入前的氧化铟与CO₂和CH₄分子作用时, 电子则由CO₂和CH₄分子流向氧化铟(亲电活化).     

多孔石墨烯分离CH4/CO2的分子动力学模拟

采用分子动力学方法模拟CH₄/CO₂混合气体在多孔石墨烯分离膜中的分离过程, 分析了3 种纳米孔功能化修饰(N/H 修饰、全H修饰和N/―CH₃修饰)对分离过程的影响规律. 模拟结果表明气体分子会在石墨烯表面形成吸附层, CO₂分子的吸附强度高于CH₄分子. 纳米孔的功能化修饰不仅减小了纳米孔的可渗透面积, 还通过影响纳米孔边缘原子的电荷分布提高了气体分子的吸附强度, 进而影响了混合气体分子在多孔石墨烯分离膜中的渗透性和选择性. CO₂分子在多孔石墨烯中的渗透率能达到10⁶ GPU (1 GPU=3.35×10^-10 mol·s^-1·m^-2·Pa^-1), 远远高于传统的聚合物分离膜. 研究表明多孔石墨烯分离膜在天然气处理、CO₂捕获等工业气体分离过程中具有广泛的应用前景.     

·OH自由基引发CH3SSCH3•+自由基裂解反应机理的理论研究

采用UωB97X-D/6-311+G^**方法, 研究了气相、 甲苯和水中OH自由基(·OH)引发CH₃SSCH₃自由基阳离子(CH₃SSC{\mathrm{H}}_{\mathrm{3}}^{?}⁺, DMDS^?+)裂解的反应机理, 并讨论了溶剂效应对反应的影响. 结果表明, ·OH和DMDS^·+首先形成自由基耦合产物CH₃S(OH)SCH₃⁺(R1)和氢提取产物复合物[CH₂=SSCH₃+H₂O]⁺(R2); 随后R1裂解直接发生 S—S键断裂协同质子转移, 而R2裂解依次发生构象变化、 C=S键亲碳加成和S—S键断裂协同质子转移. 去质子化的裂解产物为CH₃SOH, CH₂=S和HSCH₂OH. 甲苯略微降低了裂解反应速控步骤的自由能垒. 水溶剂有利于R1裂解, 但不利于R2裂解, 尤其是单个水分子参与反应. 在气相、 甲苯和水中, 以·OH和DMDS^·+为初始反应物, 虽然速控步骤的自由能垒为167.6~202.8 kJ/mol, 但裂解反应均是放热反应(?154.3~?31.4 kJ/mol).     

顺-8-三甲基锡烷基-6-辛烯醛分子内环化反应立体选择性的理论研究

用密度泛函方法在B3LYP/6-31G^*水平上研究了顺-8-三甲基锡烷基-6-辛烯醛分子内环化反应的机理,通过振动分析和内禀反应坐标对过渡态进行了确认,解析了三种反应途径.结果表明,反应具有很强的立体选择性,虽然-OSn(CH₃)₃和-C₂H₃基团均处于环的平伏位,是最稳定的产物构型,但是主要产物是经过活化能最低,且具有两个六元环椅式构象的过渡态形成的,主要产物中-OSn(CH₃)₃基团处于环的直立位.该结果与实验事实一致.     

新型含硅表面活性剂的合成及性能研究

含有双胺基的三硅氧烷中的伯胺基与D-葡萄糖酸-δ-内酯进行酰胺化,仲胺基与低聚乙二醇甲醚缩水甘油醚、二缩水甘油醚进行烷基化,制备了新型含硅表面活性剂Me₃SiOSiMeR¹OSiMe₃ [R¹=(CH₂)₃NR²(CH₂)₂NHCO(CHOH)₄CH₂OH; R²=H, CH₂CH(OH)CH₂O(CH₂CH₂O)_xCH₃, x=1, 2, 3] (1a, 2a～2c)和(CH₂OCH₂)_y(Me₃SiOSiMeR³OSiMe₃)₂ [R³=(CH₂)₃NR⁴～(CH₂)₂NHCO(CHOH)₄CH₂OH; R⁴=CH₂CH(OH)CH₂OCH₂, y=0, 1, 2] (3a～3c).这些化合物的结构用¹H, ¹³C核磁共振仪和元素分析仪进行鉴定.研究了这些新型含硅表面活性剂的界面性能,在浓度分别为10^-4和10^-5 mol·L^-1时可以将水的表面张力降低至约21 mN·m^-1.     

NMR研究溶液中正十四烷基硫酸钠/正十四烷基聚氧乙烯醚(3)表面活性剂之间的相互作用

采用¹HNMR弛豫、自扩散系数和二维相敏(2DNOESY)实验研究了正十四烷基硫酸钠[n-CH₃(CH₂)₁₃OSO₃Na(STS)]和正十四烷基聚氧乙烯醚(3)[n-CH₃(CH₂)₁₃O(C₂H₄O)₃H(C₁₄E₃)]在溶液中的自聚集以及二者混合后的相互作用.结果表明,STS与C₁₄E₃混合后存在相互作用,并形成混合胶束;弛豫实验表明,混合胶束中STS疏水链质子运动更加受阻,C₁₄E₃的α-(4″)和β-CH₂(3″)处链堆积紧密.C₁₄E₃的亲水端(CH₂CH₂0)₃链卷曲紧贴在疏水壳表面外链堆积较紧密处.自扩散系数测量表明,混合胶束比单一阴离子表面活性剂形成的胶束大.单一非离子型胶束和混合胶束的亲水端(CH₂CH₂0)₃(5″)链构成相应较软和松散的外壳.单一C₁₄E₃在极性溶剂氯仿溶液中,质子运动比在水中自由度大,但2DNOESY谱中出现了少量分子间的交叉峰,也可能形成了一些小的聚集体.     

Two-dimensional carboxylate bridged network of europium(III)-transition metal(II) glutarate compounds

Four new heterometallic glutarate coordination polymers, [Eu2M(H2O)4][O2C(CH2)3CO2]4.2H2O (M = Mn (1), Fe (2), Co (3) and Ni (4)) have been obtained under hydrothermal synthesis. The single-crystal X-ray diffraction analyses showed that they have two-dimensional frameworks based on the linear polyhedral chains consisting of two nine-coordinated Eu(III)O9 and a six-coordinated M(II)O6. These 1-D MO6-Eu2O16 chains are cross-linked by glutarate ligands as an interchain pillared architecture, whose conformations vary depending upon the transition metals. The magnetic behavior of the compounds show a weak antiferromagnetic interaction, in which shielding of the 4f electrons by the outer shell electrons effectively precludes significant coupling interactions between the Eu-4f electrons and transition metal (M)-3d electrons.     

Reactions of CH3SH and CH3SSCH3 with gas-phase hydrated radical anions (H2O)n(•-), CO2(•-)(H2O)n, and O2(•-)(H2O)n

The chemistry of (H(2)O)(n)(?-), CO(2)(?-)(H(2)O)(n), and O(2)(?-)(H(2)O)(n) with small sulfur-containing molecules was studied in the gas phase by Fourier transform ion cyclotron resonance mass spectrometry. With hydrated electrons and hydrated carbon dioxide radical anions, two reactions with relevance for biological radiation damage were observed, cleavage of the disulfide bond of CH(3)SSCH(3) and activation of the thiol group of CH(3)SH. No reactions were observed with CH(3)SCH(3). The hydrated superoxide radical anion, usually viewed as major source of oxidative stress, did not react with any of the compounds. Nanocalorimetry and quantum chemical calculations give a consistent picture of the reaction mechanism. The results indicate that the conversion of e(-) and CO(2)(?-) to O(2)(?-) deactivates highly reactive species and may actually reduce oxidative stress. For reactions of (H(2)O)(n)(?-) with CH(3)SH as well as CO(2)(?-)(H(2)O)(n) with CH(3)SSCH(3), the reaction products in the gas phase are different from those reported in the literature from pulse radiolysis studies. This observation is rationalized with the reduced cage effect in reactions of gas-phase clusters.     

Alpha-monodeuterated benzyl alcohols and phosphobetaines from reactions of aromatic aldehydes with a water/D2O-soluble phosphine

With the aim of learning more about the bleaching action of pulps by (hydroxymethyl)phosphines, we reacted several benzaldehydes, containing MeO, Me, OH, or halogen substituents, with tris(3-hydroxypropyl)phosphine, [HO(CH2)3]3P, in aqueous solution at 90 degrees C under argon. Effective reduction of the aldehydes to the corresponding benzyl alcohols with concomitant oxidation of the phosphine to the phosphine oxide takes place, the reaction proceeding via an initially formed phosphonium species. When the reactions are carried out in D2O, the benzyl alcohol product from 3,4-dimethoxybenzaldehyde contains one deuterium atom at the benzyl-carbon atom, consistent with the last step of the mechanism involving a carbanion intermediate. With syringaldehyde (3,5-dimethoxy-4-hydroxy-benzaldehyde), the reduction product (syringyl alcohol) is more reactive toward the phosphine than is the starting aldehyde, and a zwitterionic, phosphobetaine product is formed. In D2O, the zwitterion benzyl protons and protons of the hydroxypropyl-CH2 adjacent to the P atom undergo H/D exchange via presumed phosphorus ylide intermediates. Under the same aqueous reaction conditions, tris(3-hydroxypropyl)phosphine, [HO(CH2)3]3P (THPP), does not undergo redox reactions with aliphatic aldehydes but simply promotes a base-catalyzed self-condensation (aldol) reaction. THPP reduction of an aromatic ketone is sluggish, presumably because the carbonyl C-atom is less electrophilic than that present in an aromatic aldehyde.     

FTIR adsorption studies of H2O and CH3OH in the isostructural H-SSZ-13 and H-SAPO-34: formation of H-bonded adducts and protonated clusters

The acidity of the isostructural H-SSZ-13 and H-SAPO-34 has been investigated by transmission FTIR spectroscopy using H2O and CH3OH as molecular probes. Interactions between the zeolitic samples and the probe molecules led to perturbations and proton transfers directly related to the acidity of the materials. The entire set of acidic sites in H-SSZ-13 interacts with H2O and CH3OH to give H-bonded adducts or protonated species. H3O+ is not formed in appreciable amounts upon H2O adsorption on H-SSZ-13, but at high coverages H2O generates clusters that have a proton affinity sufficiently high to abstract protons from the zeolite framework. Parallel experiments carried out for H-SAPO-34 showed that the H2O clusters abstract protons from Br?nsted sites only to a minor extent. Moving to CH3OH, even if it has a higher proton affinity than H2O and should expectingly experience an easier protonation, proton transfer is totally absent in H-SAPO-34 under our set of conditions. The clear evidence of methanol protonation in H-SSZ-13 definitely states the strong acidic character of this material. When irreversibly adsorbed CH3OH is present in H-SSZ-13, an appreciable amount of (CH3)2O is formed upon heating to 573 K. Compared to its SAPO analogue, the present set of data indisputably points to H-SSZ-13 as the strongest Br?nsted acidic material.     

Mechanism of the OH-initiated oxidation of hydroxyacetone over the temperature range 236-298 K

The mechanism of the gas-phase reaction of OH radicals with hydroxyacetone (CH3C(O)CH2OH) was studied at 200 Torr over the temperature range 236-298 K in a turbulent flow reactor coupled to a chemical ionization mass-spectrometer. The product yields and kinetics were measured in the presence of O2 to simulate the atmospheric conditions. The major stable product at all temperatures is methylglyoxal. However, its yield decreases from 82% at 298 K to 49% at 236 K. Conversely, the yields of formic and acetic acids increase from about 8% to about 20%. Other observed products were formaldehyde, CO2 and peroxy radicals HO2 and CH3C(O)O2. A partial re-formation of OH radicals (by approximately 10% at 298 K) was found in the OH + hydroxyacetone + O2 chemical system along with a noticeable inverse secondary kinetic isotope effect (k(OH)/k(OD) = 0.78 +/- 0.10 at 298 K). The observed product yields are explained by the increasing role of the complex formed between the primary radical CH3C(O)CHOH and O2 at low temperature. The rate constant of the reaction CH3C(O)CHOH + O2 --> CH3C(O)CHO + HO2 at 298 K, (3.0 +/- 0.6) x 10(-12) cm3 molecule(-1) s(-1), was estimated by computer simulation of the concentration-time profiles of the CH3C(O)CHO product. The detailed mechanism of the OH-initiated oxidation of hydroxyacetone can help to better describe the atmospheric oxidation of isoprene, in particular, in the upper troposphere.     

Does α‐effect exist in E2 reactions? A G2(+) investigation

The gas-phase base-induced bimolecular elimination (E2) reactions at saturated carbon with 13 bases, B(-) + CH3CH2Cl --> BH + CH2=CH2 + Cl(-) (B = HO, CH3O, CH3CH2O, FCH2CH2O, ClCH2CH2O, Cl, Br, FO, ClO, BrO, HOO, HSO, and H2NO), were investigated with the high-level G2(+) theory. It was found that all alpha-bases with adjacent lone pair electrons examined exhibited downward deviations from the correlation line between the overall barriers and proton affinities for the normal bases without adjacent lone pair electrons, indicating the existence of the alpha-effect in the gas phase E2 reactions. The sizes of the alpha-effect for the E2 reaction, DeltaH(alpha)(E2), span a smaller range if the alpha-atoms are on the same column in the periodic table, in contrast to the corresponding S(N)2 reactions, where the DeltaH(alpha)(S(N)2) values significantly decrease from an upper to a lower column. The origin of the alpha-effects in E2 reactions can be interpreted by the favorable orbital interaction between the lone-pair electrons and positively charged anti-bonding orbital. It is worth noticing that the neighboring electron-rich pi lobe instead of lone pair electrons could also cause the alpha-effect in E2 reaction.     

Dynamics and mechanism of structural diffusion in linear hydrogen bond

Dynamics and mechanism of proton transfer in a protonated hydrogen bond (H-bond) chain were studied, using the CH(3)OH(2)(+)(CH(3)OH)(n) complexes, n = 1-4, as model systems. The present investigations used B3LYP/TZVP calculations and Born-Oppenheimer MD (BOMD) simulations at 350 K to obtain characteristic H-bond structures, energetic and IR spectra of the transferring protons in the gas phase and continuum liquid. The static and dynamic results were compared with the H(3)O(+)(H(2)O)(n) and CH(3)OH(2)(+)(H(2)O)(n) complexes, n = 1-4. It was found that the H-bond chains with n = 1 and 3 represent the most active intermediate states and the CH(3)OH(2)(+)(CH(3)OH)(n) complexes possess the lowest threshold frequency of proton transfer. The IR spectra obtained from BOMD simulations revealed that the thermal energy fluctuation and dynamics help promote proton transfer in the shared-proton structure with n = 3 by lowering the vibrational energy for the interconversion between the oscillatory shuttling and structural diffusion motions, leading to a higher population of the structural diffusion motion than in the shared-proton structure with n = 1. Additional explanation on the previously proposed mechanisms was introduced, with the emphases on the energetic of the transferring proton, the fluctuation of the number of the CH(3)OH molecules in the H-bond chain, and the quasi-dynamic equilibriums between the shared-proton structure (n = 3) and the close-contact structures (n ≥ 4). The latter prohibits proton transfer reaction in the H-bond chain from being concerted, since the rate of the structural diffusion depends upon the lifetime of the shared-proton intermediate state.     

CH4+O(3P)→CH3+OH反应的准经典轨线研究

用准经典轨线方法研究了O（3P）与CH4的反应，计算结果表明，CH4（υ＝0，j＝0）与O（3P）的反应在低及高的碰撞参数下都是直接反应，无短寿命的碰撞复合物生成，产物OH以向后散射为主，基本上处于振转基态.CH4（υ＝1，j＝1）与O（3P）的反应在低及高的碰撞参数下反应机理不一样。在低碰撞参数下是直接反应，无短寿命的碰撞复合物生成，产物OH以向后散射为主，主要处于振动基态，转动基本上是冷的，但比高碰撞参数下的热.在高的碰撞参数下则生成短寿命的碰撞复合物，产物OH以向前散射为主，表现出明显的周边动力学反应的特征，主要处于振动激发态（υ＝1），但转动仍然是较冷的。     

Mechanical Properties of Silicone Rubber Using Carbosilane Dendrimers as the Cross-linker

Peroxide-cured high-temperature vulcanized （HTV） silicone rubber was prepared by using allyl-capped carbosilane dendrimers, in which the core molecule is Si（CHaCH=CH2）4, as the cross-linker. It showed that this kind of allyl-capped carbosilane dendrimer improved the mechanical properties of silicone rubber.