水溶性钯—膦配合物催化1—己烯加氢反应研究

研究了水溶性钯－膦配合物ＰｄＣｌ２（ＴＰＰＴＳ）２催化１－己烯加氢反应，考察了两相催化体系中添加表面活性剂ＣＴＡＢ，膦配体ＴＰＰＴＳ，以及溶液ＰＨ值等对反应的影响。证明了１－己烯加氢反应中有一诱导期。反应中涉及两种催化活性物种。     

两相体系中钌膦配合物催化4—苯基—3—丁烯—2—酮加氢反应的研究

研究了水和有机物组成的两相催化体系中,由ＲｕＣｌ３－ＴＰＰＴＳ（ＴＰＰＴＳ：Ｐ（ｍ－Ｃ６Ｈ４ＳＯ３Ｎａ）３）原位反应生成的催化活性物种对４－苯基－３－丁烯－２－酮（又名苄叉丙酮）的催化加氢反应．考察了钌浓度（１．０×１０－３～６．０×１０－３ｍｏｌ／Ｌ）、氢压（１．０～６．０ＭＰａ）、反应温度（３０～７０℃）、配体浓度（１．２～７．２×１０－２ｍｏｌ／Ｌ）、阳离子表面活性剂（ＣＴＡＢ：十六烷基三甲基溴化铵）及反应时间等对加氢反应活性和选择性的影响,并与以配合物ＲｕＣｌ２（ＴＰＰＴＳ）３为催化剂前体生成的催化活性物种对加氢反应的活性及选择性进行了比较．结果表明,分别由配合物ＲｕＣｌ２（ＴＰＰＴＳ）３及ＲｕＣｌ３－ＴＰＰＴＳ原位反应生成的催化活性物种,都只催化４－苯基－３－丁烯－２－酮的Ｃ＝Ｃ键选择加氢．由配合物ＲｕＣｌ２（ＴＰＰＴＳ）３形成的催化体系的加氢活性及选择性均优于ＲｕＣｌ３－ＴＰＰＴＳ原位反应生成的催化活性物种．阳离子表面活性剂的加入,使加氢反应活性下降,选择性略有提高     

两相催化体系中α，β－不饱和醛的选择性加氢反应研究Ⅰ．水溶性钌－膦配合物催化肉桂醛的加氢性能

本文研究了两种水溶性钌－膦配合物ＲｕＣｌ_２（ＴＰＰＴＳ）_３和Ｒｕｃｌ_２（ＣＯ）_２（ＴＰＰＴＳ）_２［ＴＰＰＴＳ为：Ｐ（ｍ－Ｃ_６Ｈ_４ＳＯ_３Ｎａ）_３］的合成，在水相和有机相组成的两相催化体系中，考察了它们衍生出的活性物种和以ＲｕＣｌ３－ＴＰＰＴＳ原位合成的活性物种对肉桂醛的选择加氢性能，并对反应温度（２０—８０℃），氢压（２—６ＭＰａ），催化剂浓度（１．１２×１０~（－３）～４．５０×１０~（－３）ｍｏｌ／Ｌ），配体ＴＰＰＴＳ浓度（９．０×１０~（－３）～５．４×１０~（－２）ｍｏｌ／Ｌ），表面活性剂浓度和反应时间的变化对选择加氢反应的影响进行了详细研究。实验结果表明，ＲｕＣｌ_３－ＴＰＰＴＳ原位合成配合物的催化加氢活性最高，而在金属Ｒｕ上羰基的配位将使加氢活性降低，表面活性剂ＣＴＡＢ是有效的促进剂，它的加入可大大提高加氢活性，选择适当的ＣＴＡＢ浓度，在反应结束后水相与有机相分层迅速，有利于Ｒｕ催化剂的分离，在所考察的反应条件下，肉桂醛选择加氢生成肉桂醇的转化率大于８０％，选择性达９６％以上。     

水溶性铑—膦配合物催化长链烯烃氢甲酰化反应研究—反应条件的影响

本文研究了两相催化体系中，在ＣＴＡＢ（Ｃ１６Ｈ３３ＮＭｅ３Ｂｒ）存在下，水溶性铑－膦配合物ＲｈＣｌ（ＣＯ）（ＴＰＰＴＳ）２对１－己烯氢甲酰化反应的催化性能，详细考察了反应温度、压力、膦／铑比等对催化活性的影响。结果表明，在１．０ＭＰａ恒压下，反应温度１００℃，膦／铑摩尔比为１６，Ｈ２：ＣＯ＝１：１的条件下，１－己烯氢甲酰化的转化频率（ＴＯＦ）可达到３９．８ｍｉｎ＾－１。在此反应条件下，有机相和水相     

水溶性铑－膦配合物催化长链烯烃氢甲酰化反应研究──反应条件的影响

本文研究了两相催化体系中，在ＣＴＡＢ（Ｃ＿（１６）Ｈ＿（３３）ＮＭｅ＿３Ｂｒ）存在下，水溶性铑－膦配合物ＲｈＣｌ（ＣＯ）（ＴＰＰＴＳ）＿２对１－己烯氢甲酰化反应的催化性能，详细考察了反应温度、压力、膦／铑比等对催化活性的影响。结果表明，在１．０ＭＰａ恒压下，反应温度１００℃，膦／铑摩尔比为１６，Ｈ＿２：ＣＯ＝１：１的条件下，１－己烯氢甲酰化的转化频率（ＴＯＦ）可达到３９．８ｍｉｎ￣（－１）。在此反应条件下，有机相和水相容易分离，铑－膦配合物流失到有机相中的量极小。     

水溶性钯配合物催化柠檬醛的选择加氢研究 Ⅱ.催化剂的循环使用

研究了以水溶性ＰｄＣｌ２（ＴＰＰＴＳ）２为催化剂，在水／有机物两相体系中，添加ＴＰＰＴＳ、ＣＴＡＢ、ＰＶＡ、明胶和碳酸钠对柠檬醛加氢反应及催化剂稳定性的影响．添加配体ＴＰＰＴＳ、明胶或表面活性剂ＣＴＡＢ有利于减少钯黑的形成，但会引起催化活性的降低；而添加ＰＶＡ和Ｎａ２ＣＯ３，虽然都不能抑制钯黑的形成，但后者的添加会明显提高加氢速度；发现，明胶加碳酸钠的体系不仅可以稳定催化剂的活性物种，避免钯黑的析出，而且催化反应的转化率及选择性都较高．     

水溶性钯配合物催化化柠檬醛的选择加氢研究

研究了以水溶性ＰｄＣｌ２（ＴＰＰＴＳ）２为催化剂，在水／有化机物两相体系中，添加ＴＰＴＳ、ＣＴＡＢ、ＰＶＡ、明胶和碳酸钠和柠檬醛加氢反应及催化剂稳定性的影响，添加配体ＴＰＰＴＳ、明胶或表面活性ＣＴＡＢ有利于减少钯黑的形成，但会引起催化活性降低；而添加ＰＶＡ和Ｎａ２Ｃｏ３，虽然都不能抑制钯黑的形成，但后者的添加会明显提高加氢速度；发现，明胶加碳酸钠的体系不仅可以稳定催化剂的活性物种，避免钯黑的析出，     

水溶性铱膦配合物催化苯乙烯加氢反应研究

合成了两种水溶性铱膦配合物，ＩｒＣｌ（ＣＯ）－（ＴＰＰＴＳＷ）２和ＨＩｒＣｌ２（ＣＯ）（ＴＰＰＴＳ）２「ＴＰＰＴＳ＝Ｐ（ｍ－Ｃ６Ｈ４ＳＯ４Ｎａ）３」，并且在两相催化反应体系中评价了它们对苯乙烯加氢活性，考察了反应温度，压力，两种相转移试剂ＣＣＴＡＢ和β－ＣＤ浓度变化对苯乙烯加氢转化率的影响。     

水溶性铑－膦配合物催化1－十二碳烯常压氢甲酰化反应研究

本文研究了水溶性铑配合物ＲｈＣｌ（ＣＯ）（ＴＰＰＴＳ）２在常压（ＣＯ：Ｈ２＝１：１）条件下对１－十二碳烯氢甲酰化反应的催化性能，并对催化剂浓度、表面活性剂浓度、溶液ｐＨ值、膦铑比、溶剂等因素的变化对催化活性的影响作了考察．结果表明，表面活性剂（ＣＴＡＢ）的加入，可以在反应体系中形成胶束．加速有机相和水相间的传质速度，从而提高催化转化速度．在反应温度（８０℃）下，ＣＴＡＢ的临界胶束浓度（ＣＭＣ）较室温下高．达到最佳催化活性的ｐＨ范围为７～９，［Ｐ］／［Ｒｈ］比为１６，而有机溶剂的加入则使转化数降低．     

两相催化体系中α，β－不饱和醛的选择加氢反应研究Ⅱ．RuCl_3和TPPTS形成催化活性物种过程中的~（31）PNMR研究

两相催化体系中α，β－不饱和醛的选择加氢反应研究Ⅱ．ＲｕＣｌ_３和ＴＰＰＴＳ形成催化活性物种过程中的~（３１）ＰＮＭＲ研究王祥智，陈华，黎耀忠，李贤均（四川大学化学系，成都６１００６４）刘华骥（四川大学分析测试中心）关键词钌－膦配合物，选择加氢，（３１...     

Sc2MgGa2 and Y2MgGa2

Scandium magnesium gallide, Sc₂MgGa₂, and yttrium magnesium gallide, Y₂MgGa₂, were synthesized from the corresponding elements by heating under an argon atmosphere in an induction furnace. These intermetallic compounds crystallize in the tetragonal Mo₂FeB₂‐type structure. All three crystallographically unique atoms occupy special positions and the site symmetries of (Sc/Y, Ga) and Mg are m2m and 4/m, respectively. The coordinations around Sc/Y, Mg and Ga are pentagonal (Sc/Y), tetragonal (Mg) and triangular (Ga) prisms, with four (Mg) or three (Ga) additional capping atoms leading to the coordination numbers [10], [8+4] and [6+3], respectively. The crystal structure of Sc₂MgGa₂ was determined from single‐crystal diffraction intensities and the isostructural Y₂MgGa₂ was identified from powder diffraction data.     

Zur Kenntnis der Dialkalimetalldichalkogenide β-Na2S2, K2S2, α-Rb2S2, β-Rb2S2, K2Se2, Rb2Se2, α-K2Te2, β-K2Te2 und Rb2Te2

On Dialkali Metal Dichalcogenides β-Na₂S₂, K₂S₂, α-Rb₂S₂, β-Rb₂S₂, K₂Se₂, Rb₂Se₂, α-K₂Te₂, β-K₂Te₂ and Rb₂Te₂ The first presentation of pure samples of α- and β-Rb₂S₂, α- and β-K₂Te₂, and Rb₂Te₂ is described. Using single crystals of K₂S₂ and K₂Se₂, received by ammonothermal synthesis, the structure of the Na₂O₂ type and by using single crystals of β-Na₂S₂ and β-K₂Te₂ the Li₂O₂ type structure will be refined. By combined investigations with temperature-dependent Guinier-, neutron diffraction-, thermal analysis, and Raman-spectroscopy the nature of the monotropic phase transition from the Na₂O₂ type to the Li₂O₂ type will be explained by means of the examples α-/β-Na₂S₂ and α-/β-K₂Te₂. A further case of dimorphic condition as well as the monotropic phase transition of α- and β-Rb₂S₂ is presented. The existing areas of the structure fields of the dialkali metal dichalcogenides are limited by the model of the polar covalence.     

Crystal Structures of [Bu2Sn(O2PPh2)2], [Ph2Sn(O2PPh2)2], and [PhClSn(O2PPh2)OMe]2. Raman Spectra of [Ph2Sn(O2PPh2)2] and [PhClSn(O2PPh2)OMe]2

[(n‐Bu)₂Sn(O₂PPh₂)₂] ( 1 ), and [Ph₂Sn(O₂PPh₂)₂] ( 2 ) have been synthesized by the reactions of R₂SnCl₂ (R=n‐Bu, Ph) with HO₂PPh₂ in Methanol. From the reaction of Ph₂SnCl₂ with diphenylphosphinic acid a third product [PhClSn(O₂PPh₂)OMe]₂ ( 3 ) could be isolated. X‐ray diffraction studies show 1 to crystallize in the monoclinic space group P2₁/c with a = 1303.7(1) pm, b = 2286.9(2) pm, c = 1063.1(1) pm, β = 94.383(6)°, and Z = 4. 2 crystallizes triclinic in the space group , the cell parameters being a = 1293.2(2) pm, b = 1478.5(4) pm, c = 1507.2(3) pm, α = 98.86(3)°, β = 109.63(2)°, γ = 114.88(2)°, and Z = 2. Both compounds form arrays of eight‐membered rings (SnOPO)₂ linked at the tin atoms to form chains of infinite length. The dimer 3 consists of a like ring, in which the tin atoms are bridged by methoxo groups. It crystallizes triclinic in space group with a = 946.4(1) pm, b = 963.7(1) pm, c = 1174.2(1) pm, α = 82.495(6)°, β = 66.451(6)°, γ = 74.922(6)°, and Z = 1 for the dimer. The Raman spectra of 2 and 3 are given and discussed.     

Thermal decomposition of Me3SnO2PCl2, Me2Sn(O2PCl2)2 and Ph3SnO2PCl2

TG and DTA studies on Me₃SnO₂PCl₂, Me₂Sn(O₂PCl₂)₂ and Ph₃SnO₂PCl₂ were carried out under dynamic argon atmosphere. The results show that the decomposition proceeds in different stages leading to the formation of Sn₃(PO₄)₂ as a stable product. This compound was characterized by IR spectroscopy. Decomposition schemes involving reductive elimination reactions were proposed.     

Electrochemical study of (NEt4)2Cl2FeS2MoS2 and (NEt4)2Cl2FeS2MoS2FeCl2

Summary The ability of [MoS₄]^2–, anions to be used as ligands for transition metal ions has been widely demonstrated, especially with Fe²⁺. The present study has been restricted to linear complexes such as (NEt₄)₂ [Cl₂FeS₂MoS₂] and (NEt₄)₂[Cl₂FeS₂MoS₂FeCl₂]. Their electrochemical properties are described: upon electrochemical reduction, these compounds yield MoS₂, as a black precipitate, and an iron complex in solution, assumed to be [SFeCl₂]^2–. The electrochemical reduction goes through two electron transfers, coupled with the breakdown of the molecular skeleton: a DISPl and an ECE mechanism. Depending on the solvent, the following equilibrium may be observed: [Cl₄Fe₂MoS₄]^2–[Cl₂FeMoS₄]^2–+FeCl₂. The equilibrium constant, K_D, was evaluated by differential pulse polarography. K_D is tightly related to the donor number of the solvent.     

The alkali hypophosphites KH2PO2, RbH2PO2 and CsH2PO2

The structures of the hypophosphites KH₂PO₂ (potassium hypophosphite), RbH₂PO₂ (rubidium hypophosphite) and CsH₂PO₂ (caesium hypophosphite) have been determined by single‐crystal X‐ray diffraction. The structures consist of layers of alkali cations and hypophosphite anions, with the latter bridging four cations within the same layer. The Rb and Cs hypophosphites are isomorphous.     

Formal [(2+2)+2] and [(2+2)+(2+2)] nonconjugated dienediyne cascade cycloadditions

[reaction: see text] Fluoranthene 2 and heptacycle 3 are easily accessible from the reaction of diyne 1 and norbornadiene (NBD) in the presence of the rhodium catalyst. The unusual [(2+2)+(2+2)] adduct 3 was confirmed by the X-ray crystal structure analysis.