Synergy between Plasmonic and Electrocatalytic Activation of Methanol Oxidation on Palladium–Silver Alloy Nanotubes

Localized surface plasmon resonance (LSPR) excitation of noble metal nanoparticles has been shown to accelerate and drive photochemical reactions. Here, LSPR excitation is shown to enhance the electrocatalysis of a fuel‐cell‐relevant reaction. The electrocatalyst consists of Pd_xAg alloy nanotubes (NTs), which combine the catalytic activity of Pd toward the methanol oxidation reaction (MOR) and the visible‐light plasmonic response of Ag. The alloy electrocatalyst exhibits enhanced MOR activity under LSPR excitation with significantly higher current densities and a shift to more positive potentials. The modulation of MOR activity is ascribed primarily to hot holes generated by LSPR excitation of the Pd_xAg NTs.     

Dodecahedral Au/Pt Nanobowls as Robust Plasmonic Electrocatalysts for Methanol Oxidation under Visible-Light Illumination

Plasmonic nanostructures with large absorption areas under resonant excitation have been utilized extensively in photon-assisted applications. In this work, dodecahedral Au nanobowls were first prepared by an easy and template-free method only through the introduction of H₂PtCl₆ and I⁻ during the growth procedure. The Au nanobowls show electron-field enhancement due to the high curvature of the bowl edge, the open region, and dodecahedral morphology. Au/Pt nanobowls, which couple plasmonic Au and catalytic Pt, were then constructed as plasmonic electrocatalysts for methanol oxidation. The mass activity reached 497.6 mA mg⁻¹ under visible-light illumination, which is 1.9 times that measured in the dark. Simultaneously, the electrocatalytic stability is also greatly improved under light excitation. The enhanced properties of the plasmonic Au/Pt electrocatalysts are ascribed to the synergistic effect of the plasmon-enhanced photothermal and hot-carrier effects on the basis of experimental investigations. This work thus offers an effective methodology to construct efficient plasmonic electrocatalysts for fuel cells.     

Integration of Plasmonic Effects and Schottky Junctions into Metal–Organic Framework Composites: Steering Charge Flow for Enhanced Visible‐Light Photocatalysis

A wide range of light absorption and rapid electron–hole separation are desired for efficient photocatalysis. Herein, on the basis of a semiconductor‐like metal–organic framework (MOF), a Pt@MOF/Au catalyst with two types of metal–MOF interfaces integrates the surface plasmon resonance excitation of Au nanorods with a Pt‐MOF Schottky junction, which not only extends the light absorption of the MOF from the UV to the visible region but also greatly accelerates charge transfer. The spatial separation of Pt and Au particles by the MOF further steers the formation of charge flow and expedites the charge migration. As a result, the Pt@MOF/Au presents an exceptionally high photocatalytic H₂ production rate by water splitting under visible light irradiation, far superior to Pt/MOF/Au, MOF/Au and other counterparts with similar Pt or Au contents, highlighting the important role of each component and the Pt location in the catalyst.     

基于等离激元热电子调控的全谱光催化产氢增强（英文）

等离激元效应在光催化体系中的集成为实现广谱光吸收提供了一个新的途径,然而等离激元热电子的较低迁移率和不确定扩散方向使得其光催化效率仍较低.等离激元金属与n型半导体接触后,其界面间会形成肖特基结.在特定波长太阳光照射下,等离激元金属将其表面等离子体能量聚集在表面自由电子上,进而产生热电子.当这些热电子具有的能量高于肖特基势垒时,热电子便可注入到半导体导带上.与此同时,半导体上的电子可以通过肖特基接触发生回流,与金属上的空穴复合,进而降低半导体-等离激元金属复合材料的光催化性能.因此,为了提高光催化效率,如何调控等离激元热电子迁移和充分利用等离激元效应是一个重要挑战.本文尝试将"表面异质结"与肖特基结相结合的复合结构,得以有效地调控等离激元热电子的迁移.在该复合结构中,金纳米颗粒和铂纳米颗粒分别作为等离激元吸光单元和助催化剂,集成在TiO_2纳米片表面.其中"表面异质结"是由TiO_2纳米片的两种不同表面晶面所构成,我们选择由{001}和{101}两组晶面组成的TiO_2纳米片作为半导体衬底.该结构中的{001}晶面导带能级高于{101}导带能级,因而电子由高能级的{001}流向低能级的{101}晶面,可以用来引导等离激元热电子从可见光响应的金纳米颗粒向TiO_2进行高效转移.通过巯基丙酸的桥联作用,将等离激元Au纳米颗粒锚定在TiO_2纳米片的{001}晶面上,获得Au-TiO_2{001}样品.另一方面,利用TiO_2纳米片自身光生电荷导向性光沉积,得到与{101}晶面结合形成的Au-TiO_2{101}样品.我们对两组样品进行光电流和光催化产氢实验对比,确认在"表面异质结"诱导下Au-TiO_2{001}样品中Au产生的光生热电子可以更好地注入到TiO_2纳米片导带上.我们进一步通过光沉积Pt纳米颗粒来判定光生电子所能到达的区域,验证了以上结论.与此同时,肖特基结由铂纳米颗粒与TiO_2纳米片所形成,可以促使电子由TiO_2向铂纳米颗粒进行转移,而避免发生向金纳米颗粒的反向迁移,从而在Au-TiO_2体系中实现高效的单向载流子转移.基于该设计,等离激元光催化剂实现了明显改善的全谱光催化产氢性能.本文为全谱光催化的复合结构理性设计提供了一个新的思路.     

Single‐Molecule Nanocatalysis Shows In Situ Deactivation of Pt/C Electrocatalysts during the Hydrogen‐Oxidation Reaction

By coupling a Pt‐catalyzed fluorogenic reaction with the Pt‐electrocatalyzed hydrogen‐oxidation reaction (HOR), we combine single‐molecule fluorescence microscopy with traditional electrochemical methods to study the real‐time deactivation kinetics of a Pt/C electrocatalyst at single‐particle level during electrocatalytic hydrogen‐oxidation reaction. The decay of the catalytic performance of Pt/C could be mainly attributed to the electrocatalysis‐induced etching or dissolution of Pt nanoparticles. Spontaneous regeneration of activity and incubation period of the Pt electrocatalyst were also observed at single‐particle level. All these new insights are practically useful for the understanding and rational design of highly efficient electrocatalysts for application in fuel cells.     

ZIF‐Induced d‐Band Modification in a Bimetallic Nanocatalyst: Achieving Over 44 % Efficiency in the Ambient Nitrogen Reduction Reaction

The electrochemical nitrogen reduction reaction (NRR) offers a sustainable solution towards ammonia production but suffers poor reaction performance owing to preferential catalyst–H formation and the consequential hydrogen evolution reaction (HER). Now, the Pt/Au electrocatalyst d‐band structure is electronically modified using zeolitic imidazole framework (ZIF) to achieve a Faradaic efficiency (FE) of >44 % with high ammonia yield rate of >161 μg mg_cat^?1 h^?1 under ambient conditions. The strategy lowers electrocatalyst d‐band position to weaken H adsorption and concurrently creates electron‐deficient sites to kinetically drive NRR by promoting catalyst–N₂ interaction. The ZIF coating on the electrocatalyst doubles as a hydrophobic layer to suppress HER, further improving FE by >44‐fold compared to without ZIF (ca. 1 %). The Pt/Au‐N_ZIF interaction is key to enable strong N₂ adsorption over H atom.     

Durability investigation of graphene-supported Pt nanocatalysts for PEM fuel cells

We report graphene nanosheets as a durable alternative support material for Pt nanoparticle catalysts for oxygen reduction in proton exchange membrane (PEM) fuel cells and compared them to XC-72. The materials were characterized by X-ray diffraction and transmission electron microscopy. Electrochemical surface oxidation of XC-72 and graphene, and of Pt/XC-72 and Pt/graphene has been compared following treatments for up to 120 h. The electrochemical performance of the specimens was evaluated by cyclic voltammetry and linear sweep voltammetry at different surface oxidation time intervals. Electrochemical measurements indicate that the graphene exihibits greatly enhanced electrochemical durability. It is suggested that graphene nanosheet is a promising, low-cost, and durable electrocatalyst support for oxygen reduction in the PEM fuel cell.     

Electrooxidation of 2-propanol on Pt, Pd and Au in alkaline medium

Pd and Au are investigated as electrocatalysts for 2-propanol oxidation and compared with the conventional catalyst of Pt in alkaline medium. The current density for 2-propanol oxidation on Pd electrode is much higher than that on Pt electrode. The onset potential for 2-propanol oxidation on Pd electrode is more negative compared with that on Pt electrode. The results show that Pd is a good electrocatalyst for 2-propanol oxidation and the activity for the electrooxidation of 2-propanol is higher than Pt and Au in alkaline medium. Pd has higher electrocatalytic activity and better stability for the electrooxidation of 2-propanol. The present study shows a promising choice of Pd as effective electrocatalyst for 2-propanol electrooxidation in alkaline medium.     

ZIF-Induced d-Band Modification in a Bimetallic Nanocatalyst: Achieving Over 44 % Efficiency in the Ambient Nitrogen Reduction Reaction

The electrochemical nitrogen reduction reaction (NRR) offers a sustainable solution towards ammonia production but suffers poor reaction performance owing to preferential catalyst–H formation and the consequential hydrogen evolution reaction (HER). Now, the Pt/Au electrocatalyst d-band structure is electronically modified using zeolitic imidazole framework (ZIF) to achieve a Faradaic efficiency (FE) of >44 % with high ammonia yield rate of >161 μg mg_cat⁻¹ h⁻¹ under ambient conditions. The strategy lowers electrocatalyst d-band position to weaken H adsorption and concurrently creates electron-deficient sites to kinetically drive NRR by promoting catalyst–N₂ interaction. The ZIF coating on the electrocatalyst doubles as a hydrophobic layer to suppress HER, further improving FE by >44-fold compared to without ZIF (ca. 1 %). The Pt/Au-N_ZIF interaction is key to enable strong N₂ adsorption over H atom.     

Electrocatalytic oxidation of formic acid and methanol on Pt deposits on Au(111)

This work presents characteristics of Pt deposits on Au(111) obtained by the use of spontaneous deposition and investigated by electrochemical scanning tunneling microscopy (EC-STM). On such prepared and STM characterized Au(111)/Pt surfaces, we studied electrocatalytic oxidation of formic acid and methanol. We show that the first monatomic layer of Pt displays a (square root 3 x square root 3)R30 degrees surface structure, while the second layer is (1 x 1). After prolonged deposition, multilayer Pt deposits are formed selectively on Au(111) surface steps and are 1-20 nm wide and one to five layers thick. On the optimized Au(111)/Pt surface, formic acid oxidation rates are enhanced by a factor of 20 compared to those of pure Pt(111). The (square root 3 x square root 3)R30 degrees-Pt yields very low methanol oxidation rates, but the rates increase significantly with further Pt growth.     

“卡房”结构LDHs负载Pt纳米催化剂用于乙醇电催化氧化

乙醇电催化氧化是直接乙醇燃料电池(DEFCs)的核心反应,而DEFCs的阳极电催化剂是提升乙醇转化效率的关键。Pt作为最稳定、最有效的催化剂之一,仍面临着成本高、容易被乙醇氧化产生的中间产物毒化等问题。选择合适的载体实现Pt的高度、均匀、稳定分散,不仅可以提高其抗中毒能力和催化活性,而且还可以减少Pt用量降低成本。本文采用两步电化学沉积法合成了层状双金属氢氧化物(LDHs)纳米阵列负载Pt纳米催化剂(Pt/LDHs/NF),具有“卡房”结构的LDHs增强了Pt纳米粒子的分散,有助于实现高效的乙醇电催化氧化性能。制备的Pt/NiFe-LDH/NF在碱性环境下对乙醇表现出最优的电催化氧化活性,峰值电流密度达到171.99mA·cm^-2。这可为今后设计和制备均匀、稳定分散的Pt基催化剂用于乙醇电催化氧化提供借鉴。     

Platinum covering of gold nanoparticles for utilization enhancement of Pt in electrocatalysts

This work attempts to enhance platinum utilization in a Pt-based electrocatalyst by the tuned covering of gold nanoparticles with small Pt entities. Reductive deposition of Pt on Au nanoparticles of two size ranges (Au-I: 10 +/- 1.2 nm, Au-II: 3 +/- 0.6 nm) up to different atomic Pt : Au ratios (m) was used to prepare two series of samples named Pt(m)insertion markAu-I and Pt(m)insertion markAu-II particles, respectively. The obtained Pt(m)insertion markAu particles were characterized with TEM, XPS, UV-Vis and XRD techniques, and then loaded on conventional Vulcan XC-72 carbon to make Pt(m)insertion markAu/C electrocatalysts. Cyclic voltammetry (CV) measurements showed that the electrochemical active surface area (EAS) and Pt utilization (U(Pt)) in Pt(m)insertion markAu/C were enhanced remarkably at m< or = 0.2 for Pt(m)insertion markAu-I/C or m< or = 0.5 for Pt(m)insertion markAu-II/C, in comparison to conventional Pt/C electrocatalyst. In particular, U(Pt) was enhanced to nearly 100% in Pt(m)insertion markAu-I/C catalysts at m< or = 0.05 and in Pt(m)insertion markAu-II/C at m< or = 0.1. In the CV measurement of methanol electro-oxidation, the specific mass activity of Pt in Pt(m)insertion markAu/C catalysts was found in proportional to U(Pt), confirming that the enhancement of Pt utilization is essential for the development of highly active Pt-based electrocatalysts. The highly dispersed Pt entities on Au nanoparticles proved to be stable during the electro-oxidation of methanol. Our study also showed that the use of smaller Au nanoparticles is advantageous for the generation of more active Pt catalyst at higher atomic Pt : Au ratios.     

Al Electrode Modified by Au Atoms as a Novel Electrode for Electrocatalytic Oxidation of Thiosulfate

An aluminum electrode modified with gold atoms was introduced as a novel electrode. Gold atoms were deposited both chemically and electrochemically onto the aluminum electrode to make an aluminum/gold (Al/Au) modified electrode (ME). The experimental results showed that the Al/Au modified electrode prepared by chemical deposition, exhibits much more current than the electrochemical deposition method. The electrochemical behavior of the Al/Au modified electrode was studied by cyclic voltammometry. This modified electrode showed two pairs of peaks, a₁c₁ and a₂c₂, with surface‐confined characteristics in a 0.5 M phosphate buffer. The dependence of E_pa of the second peak (a₂c₂) on pH shows a Nernestian behavior with a slope of 55 mV per unit pH. The effect of different supporting electrolytes, solution's pH and different scan rates on electrochemical behavior of Al/Au modified electrode was studied. Au deposited electrochemically on a Pt electrode (Pt/Au) was also used as another modified electrode. A comparative study of electrochemical behavior of bare Al, Pt/Au and Al/Au modified electrodes showed that both Pt/Au and Al/Au electrodes have the ability of electrocatalytic oxidation of S₂O₃^2?, but the electrocatalytic oxidation on the latter was better than the former. The kinetics of the catalytic reaction was investigated by using cyclic voltammetry and chronoamperometry techniques. The average value of the rate constant for the catalytic reaction and the diffusion coefficient were evaluated by means of chronoamperometry technique.     

Performance of Pt—TiO2 Electrocatalyst for CO Oxidation in the Electrochemical Gas Sensor

It is reported for the first time that the Pt/TiO2 electrocatalyst was successfully used for the electrocatalytic oxidation of CO in the electrochemical gas sensor with a controlled potential mode. The stability of electrocatalytic activity of the Pt-TiO2 electrocatalyst for the CO oxidation is better than that of Pt.     

Boosting Hydrogen Evolution at Visible Light Wavelengths by Using a Photocathode with Modal Strong Coupling between Plasmons and a Fabry-Pérot Nanocavity

Hot-hole injection from plasmonic metal nanoparticles to the valence band of p-type semiconductors and reduction by hot electrons should be improved for efficient and tuneable reduction to obtain beneficial chemical compounds. We employed the concept of modal strong coupling between plasmons and a Fabry-Pérot (FP) nanocavity to enhance the hot-hole injection efficiency. We fabricated a photocathode composed of gold nanoparticles (Au−NPs), p-type nickel oxide (NiO), and a platinum film (Pt film) (ANP). The ANP structure absorbs visible light over a broad wavelength range from 500 nm to 850 nm via hybrid modes based on the modal strong coupling between the plasmons of Au−NPs and the FP nanocavity of NiO on a Pt film. All wavelength regions of the hybrid modes of the modal strong coupling system promoted hot-hole injection from the Au−NPs to NiO and proton/water reduction by hot electrons. The incident photon-to-current efficiency based on H₂ evolution through water/proton reduction by hot electrons reached 0.2 % at 650 nm and 0.04 % at 800 nm.     

Au nanowires with high aspect ratio and atomic shell of Pt-Ru alloy for enhanced methanol oxidation reaction

The methanol oxidation reaction(MOR) is the limiting half-reaction in direct methanol fuel cell(DMFC).Although Pt is the most active single-metal electrocatalyst for MOR,it is hampered by high cost and CO poisoning.Constructing a Pt or Ru monolayer on a second metal substrate by means of galvanic replacement of underpotentially deposited(UPD) Cu monolayer has been shown as an efficient catalyst design strategy for the electrocatalysis of MOR because of the presumed 100% utilization of atoms and resistance to CO poisoning.Herein,we prepared one-dimensional surface-alloyed electrocatalyst from predominantly(111) faceted Au nanowires with high aspect ratio as the substrate of under-potential deposition.The electrocatalyst comprises a core of the Au nanowire and a shell of catalytically active Pt coated by Ru.Coverage-dependent electro-catalytic activity and stability is demonstrated on the Pt/Ru submonolayers on Au wires for MOR.Among all these catalysts,Au@Pt_(ML)@Ru_(ML) exhibits the best electrocatalytic activity and poisoning tolerance to CO.This presents a viable method for the rational catalyst design for achieving high noble-metal utilization efficiency and high catalytic performance.     

A novel Pt/Au/C cathode catalyst for direct methanol fuel cells with simultaneous methanol tolerance and oxygen promotion

A novel Pt/Au/C catalyst was prepared by depositing the Pt and Au nanoparticles on the carbon support. The synthesized catalysts were characterized by energy-dispersive X-ray (EDX) and transmission electron microscopy (TEM), and electrochemically analyzed for activity towards oxygen-reduction reaction and methanol oxidation reaction. EDX and TEM results reveal that Pt nanoparticles supported on carbon supports were separated by Au nanoparticles. The electrochemical analysis indicate that the novel catalyst showed the enhanced methanol tolerance while maintaining a high catalytic activity for the oxygen-reduction reaction, which could be attributed to the less methanol adsorption on Pt/Au/C catalyst.     

Plasmonic Activation of a Fluorescent Carbazole–Oxazine Switch

The covalent attachment of a carbazole fluorophore to an oxazine photochrome permits the reversible activation of fluorescence under optical control. Ultraviolet irradiation with a pulsed laser opens the oxazine ring to shift bathochromically the absorption of the carbazole component. Concomitant visible illumination excites selectively the carbazole fluorophore of the photochemical product to produce fluorescence. The photogenerated and fluorescent species reverts spontaneously on a submicrosecond timescale to the initial nonemissive state of the carbazole–oxazine dyad. The photochemical and photophysical properties engineered into this particular molecular switch allow the convenient monitoring of plasmonic effects on photochemical reactions with fluorescence measurements. In close proximity to silver nanoparticles, visible illumination with a continuous‐wave laser also results in fluorescence activation. The metallic nanostructures enable the two‐photon excitation of the oxazine component to induce the photochromic transformation and then facilitate the one‐photon excitation of the photochemical product to generate fluorescence. Thus, these operating principles offer the opportunity to avoid altogether the need of pulsed ultraviolet irradiation to trigger the photochromic transformation and, instead, allow fluorescence activation with a single visible source operating at low illumination power.     

The Polarization Effect in Surface‐Plasmon‐Induced Photocatalysis on Au/TiO2 Nanoparticles

Controlling the interaction of polarization light with an asymmetric nanostructure such as a metal/semiconductor heterostructure provides opportunities for tuning surface plasmon excitation and near‐field spatial distribution. However, light polarization effects on interfacial charge transport and the photocatalysis of plasmonic metal/semiconductor photocatalysts are unclear. Herein, we reveal the polarization dependence of plasmonic charge separation and spatial distribution in Au/TiO₂ nanoparticles under 45° incident light illumination at the single‐particle level using a combination of photon‐irradiated Kelvin probe force microscopy (KPFM) and electromagnetic field simulation. We quantitatively uncover the relationship between the local charge density and polarization angle by investigating the polarization‐dependent surface photovoltage (SPV). The plasmon‐induced photocatalytic activity is enhanced when the polarization direction is perpendicular to the Au/TiO₂ interface.