Chemical‐Reductant‐Free Electrochemical Deuteration Reaction using Deuterium Oxide

We report a method for the electrochemical deuteration of α,β‐unsaturated carbonyl compounds under catalyst‐ and external‐reductant‐free conditions, with deuteration rates as high as 99 % and yields up to 91 % in 2 h. The use of graphite felt for both the cathode and the anode was key to ensuring chemoselectivity and high deuterium incorporation under neutral conditions without the need for an external reductant. This method has a number of advantages over previously reported deuteration reactions that use stoichiometric metallic reductants. Mechanistic experiments showed that O₂ evolution at the anode not only eliminates the need for an external reductant but also regulates the pH of the reaction mixture, keeping it approximately neutral.     

On the Mechanism of the Reactivity of 1,3‐Dialkylimidazolium Salts under Basic to Acidic Conditions: A Combined Kinetic and Computational Study

Comprehensive spectroscopic kinetic studies illustrate an alternative mechanism for the traditional free‐carbene intermediated H/D exchange reaction of 1,3‐dialkylimidazolium salts under neutral (D₂O) and acidic conditions (DCl/D₂O 35 wt % solution). The deuteration of high purity [bmim]Cl in D₂O is studied at different temperatures, in absence of catalyst or impurities, to yield an activation energy. DFT transition‐state modelling, of a small water cluster and [bmim] cation, also yields an activation energy which strongly supports the proposed mechanism. The presence of basic impurities are shown to significantly enhance the exchange reaction, which brings into question the need for further analysis of technical purities of ionic liquids and the implications for a wide range of chemical reactions in such media.     

Deuterodehalogenation Under Net Reductive or Redox-Neutral Conditions Enabled by Paired Electrolysis

Interest in deuterated active pharmaceutical ingredients (APIs) is increasing as deuteration holds promise for kinetic isotope effect (KIE) regulated fine-tuning of API performance. Moreover, deuterium isotope labeling is frequently carried out to study organic and bioorganic reaction mechanisms and to facilitate complex target synthesis. As such, methods for highly selective deuteration of organic molecules are highly desirable. Herein, we present an electrochemical method for the selective deuterodehalogenation of benzylic halides via a radical-polar crossover mechanism, using inexpensive deuterium oxide (D₂O) as the deuterium source. We demonstrate broad functional group compatibility across a range of aryl and heteroaryl benzylic halides. Furthermore, we uncover a sequential paired electrolysis regime, which permits switching between net reductive and overall redox-neutral reactions of sulfur-containing substrates simply by changing the identity of the sacrificial reductant employed.     

Organo-Mediator Enabled Electrochemical Deuteration of Styrenes

Despite widespread use of the deuterium isotope effect, selective deuterium labeling of chemical molecules remains a major challenge. Herein, a facile and general electrochemically driven, organic mediator enabled deuteration of styrenes with deuterium oxide (D₂O) as the economical deuterium source was reported. Importantly, this transformation could be suitable for various electron rich styrenes mediated by triphenylphosphine (TPP). The reaction proceeded under mild conditions without transition-metal catalysts, affording the desired products in good yields with excellent D-incorporation (D-inc, up to >99 %). Mechanistic investigations by means of isotope labeling experiments and cyclic voltammetry tests provided sufficient support for this transformation. Notably, this method proved to be a powerful tool for late-stage deuteration of biorelevant compounds.     

Mild,Selective Ru-Catalyzed Deuteration Using D2O as a Deuterium Source

A method for the selective deuteration of polyfunctional organic molecules using catalytic amounts of [RuCl₂(PPh₃)₃] and D₂O as a deuterium source is presented. Through variation of additives like CuI, KOH, and various amounts of zinc powder, orthogonal chemoselectivities in the deuteration process are observed. Mechanistic investigation indicates the presence of different, defined Ru-complexes under the given specific conditions.     

A convenient method for the Ru(0)-catalyzed regioselective deuteration of N-alkyl-substituted anilines

A highly effective and operationally practical method for the regioselective deuteration of N-alkyl-substituted anilines employing Ru₃(CO)₁₂ (?1 mol %) as catalyst and D₂O as deuterium source was described. A variety of N-alkyl-substituted anilines were efficiently deuterated (up to 98%) at the ortho and/or para position with respect to the nitrogen at neutral conditions. Under the present conditions, deuterated anilines can be easily obtained with simple extraction and evaporation. Substituents with aromatic methoxy groups would not influence the selectivity compared to previous method.     

Antimony‐Based Composites Loaded on Phosphorus‐Doped Carbon for Boosting Faradaic Efficiency of the Electrochemical Nitrogen Reduction Reaction

A nanocomposite of PC/Sb/SbPO₄ (PC, phosphorus‐doped carbon) exhibits a high activity and an excellent selectivity for efficient electrocatalytic conversion of N₂ to NH₃ in both acidic and neutral electrolytes under ambient conditions. At a low reductive potential of ?0.15 V versus the reversible hydrogen electrode (RHE), the PC/Sb/SbPO₄ catalyst achieves a high Faradaic efficiency (FE) of 31 % for ammonia production in 0.1 m HCl under mild conditions. In particular, a remarkably high FE value of 34 % is achieved at a lower reductive potential of ?0.1 V (vs. RHE) in a 0.1 m Na₂SO₄ solution, which is better than most reported electrocatalysts towards the nitrogen reduction reaction (NRR) in neutral electrolyte under mild conditions. The change in surface species and electrocatalytic performance before and after N₂ reduction is explored by an ex situ method. PC and SbPO₄ are both considered as the active species that enhanced the performance of NRR.     

Photocatalytic Deuterium Atom Transfer Deuteration of Electron-Deficient Alkenes with High Functional Group Tolerance

Due to its mild reaction conditions and unique chemoselectivity, hydrogen atom transfer (HAT) hydrogenation represents an indispensable method for the synthesis of complex molecules. Its analog using deuterium, deuterium atom transfer (DAT) deuteration, is expected to enable access to complex deuterium-labeled compounds. However, DAT deuteration has been scarcely studied for synthetic purposes, and a method that possesses the favorable characteristics of HAT hydrogenations has remained elusive. Herein, we report a protocol for the photocatalytic DAT deuteration of electron-deficient alkenes. In contrast to the previous DAT deuteration, this method tolerates a variety of synthetically useful functional groups including haloarenes. The late-stage deuteration also allows access to deuterated amino acids as well as donepezil-d₂. Thus, this work demonstrates the potential of DAT chemistry to become the alternative method of choice for preparing deuterium-containing molecules.     

Catalytic Stereoinversion of L‐Alanine to Deuterated D‐Alanine

A combination of an achiral pyridoxal analogue and a chiral base has been developed for catalytic deuteration of L ‐alanine with inversion of stereochemistry to give deuterated D ‐alanine under mild conditions (neutral pD and 25 °C) without the use of any protecting groups. This system can also be used for catalytic deuteration of D ‐alanine with retention of stereochemistry to give deuterated D ‐alanine. Thus a racemic mixture of alanine can be catalytically deuterated to give an enantiomeric excess of deuterated D ‐alanine. While catalytic deracemization of alanine is forbidden by the second law of thermodynamics, this system can be used for catalytic deracemization of alanine with deuteration. Such green and biomimetic approach to catalytic stereocontrol provides insights into efficient amino acid transformations.     

CONTROL OF PHOTOSYNTHETIC REDUCTANT: THE ROLE OF LIGHT AND TEMPERATURE ON SUSTAINED HYDROGEN PHOTOEVOLUTION BY Chlamydomonas sp. IN AN ANOXIC,CARBON DIOXIDE-CONTAINING ATMOSPHERE*

–Sustained hydrogen photoevolution from Chlamy domonas reinhardtii and C. Moewusii was measured under an anoxic, CO₂-containing atmosphere. It has been discovered that light intensity and temperature influence the partitioning of reductant between the hydrogen photoevolution pathway and the Calvin cycle. Under low incident light intensity (1-3 W m^-2) or low temperature (approx. 0°C), the flow of photosynthetic reductant to the Calvin cycle was reduced, and reductant was partitioned to the hydrogen pathway as evidenced by sustained H₂ photoevolution. Under saturating light (25 W m^-2) and moderate temperature (20±5°C), the Calvin cycle became the absolute sink for reductant with the exception of a burst of H₂ occurring at light on. This burst of H₂ corresponded to the expression of about 450 electrons for each photosynthetic electron transport chain. These results suggest that the hydrogen pathway and the Calvin cycle compete for reductant under anoxic conditions and that partioning between the two pathways can, to a certain extent, be controlled by the appropriate choice of experimental conditions.     

Excellent Stability of a Lithium‐Ion‐Conducting Solid Electrolyte upon Reversible Li+/H+ Exchange in Aqueous Solutions

Batteries with an aqueous catholyte and a Li metal anode have attracted interest owing to their exceptional energy density and high charge/discharge rate. The long‐term operation of such batteries requires that the solid electrolyte separator between the anode and aqueous solutions must be compatible with Li and stable over a wide pH range. Unfortunately, no such compound has yet been reported. In this study, an excellent stability in neutral and strongly basic solutions was observed when using the cubic Li₇La₃Zr₂O₁₂ garnet as a Li‐stable solid electrolyte. The material underwent a Li⁺/H⁺ exchange in aqueous solutions. Nevertheless, its structure remained unchanged even under a high exchange rate of 63.6 %. When treated with a 2 M LiOH solution, the Li⁺/H⁺ exchange was reversed without any structural change. These observations suggest that cubic Li₇La₃Zr₂O₁₂ is a promising candidate for the separator in aqueous lithium batteries.     

The overshoot phenomenon as a function of internal resistance in microbial fuel cells

A method for assessing the performance of microbial fuel cells (MFCs) is the polarisation sweep where different external resistances are applied at set intervals (sample rates). The resulting power curves often exhibit an overshoot where both power and current decrease concomitantly. To investigate these phenomena, small-scale (1 mL volume) MFCs operated in continuous flow were subjected to polarisation sweeps under various conditions. At shorter sample rates the overshoot was more exaggerated and power generation was overestimated; sampling at 30 s produced 23% higher maximum power than at 3 min. MFCs with an immature anodic biofilm (5 days) exhibited a double overshoot effect, which disappeared after a sufficient adjustment period (5 weeks). Mature MFCs were subject to overshoot when the anode was fed weak (1 mM acetate) feedstock with low conductivity (<100 μS) but not when fed with a higher concentration (20 mM acetate) feedstock with high conductivity (>1500 μS). MFCs developed in a pH neutral environment produced overshoot after the anode had been exposed to acidic (pH 3) conditions for 24 h. In contrast, changes to the cathode both in terms of pH and varying catholyte conductivity, although affecting power output did not result in overshoot suggesting that this is an anodic phenomenon.     

Chemoselective Amination of Propargylic C(sp3)?H Bonds by Cobalt(II)‐Based Metalloradical Catalysis

Highly chemoselective intramolecular amination of propargylic C(sp³) H bonds has been demonstrated for N‐bishomopropargylic sulfamoyl azides through cobalt(II)‐based metalloradical catalysis. Supported by D_2h‐symmetric amidoporphyrin ligand 3,5‐Di^tBu‐IbuPhyrin, the cobalt(II)‐catalyzed C H amination proceeds effectively under neutral and nonoxidative conditions without the need of any additives, and generates N₂ as the only byproduct. The metalloradical amination is suitable for both secondary and tertiary propargylic C H substrates with an unusually high degree of functional‐group tolerance, thus providing a direct method for high‐yielding synthesis of functionalized propargylamine derivatives.     

Electrochemical oxidation of dyes on oxide lead anode with the involvement of active oxygen species

Kinetics and selectivity of oxidation of dyes (Methyl Orange and Chrome Dark Blue) on a lead dioxide (Pb/PbO₂) anode at various current densities, substrate concentrations, and pH values with the use of various active oxygen species was studied. It was shown that the electrochemical oxidation of dyes on the Pb/PbO₂ anode occurs rather effectively under the chosen conditions. The mineralization efficiency in 5 h was 51 to 89.5 and 93 to 100% for, respectively, Methyl Orange and Chrome Dark Blue, depending on the electrolysis conditions.     

A Membrane-Free Neutral pH Formate Fuel Cell Enabled by a Selective Nickel Sulfide Oxygen Reduction Catalyst

Polymer electrolyte membranes employed in contemporary fuel cells severely limit device design and restrict catalyst choice, but are essential for preventing short-circuiting reactions at unselective anode and cathode catalysts. Herein, we report that nickel sulfide Ni₃S₂ is a highly selective catalyst for the oxygen reduction reaction in the presence of 1.0 m formate. We combine this selective cathode with a carbon-supported palladium (Pd/C) anode to establish a membrane-free, room-temperature formate fuel cell that operates under benign neutral pH conditions. Proof-of-concept cells display open circuit voltages of approximately 0.7 V and peak power values greater than 1 mW cm⁻², significantly outperforming the identical device employing an unselective platinum (Pt) cathode. The work establishes the power of selective catalysis to enable versatile membrane-free fuel cells.     

Chemoselective Amination of Propargylic C(sp3)H Bonds by Cobalt(II)‐Based Metalloradical Catalysis

Highly chemoselective intramolecular amination of propargylic C(sp³)? H bonds has been demonstrated for N‐bishomopropargylic sulfamoyl azides through cobalt(II)‐based metalloradical catalysis. Supported by D_2h‐symmetric amidoporphyrin ligand 3,5‐Di^tBu‐IbuPhyrin, the cobalt(II)‐catalyzed C? H amination proceeds effectively under neutral and nonoxidative conditions without the need of any additives, and generates N₂ as the only byproduct. The metalloradical amination is suitable for both secondary and tertiary propargylic C? H substrates with an unusually high degree of functional‐group tolerance, thus providing a direct method for high‐yielding synthesis of functionalized propargylamine derivatives.     

General method of obtaining deuterium-labeled heterocyclic compounds using neutral D2O with heterogeneous Pd/C

A protocol of a versatile H-D exchange reaction of heterocyclic compounds catalyzed by heterogeneous Pd/C in D₂O is described. The reaction of various nitrogen-containing heterocycles with 10% Pd/C (10 wt % of the substrate) under hydrogen atmosphere in D₂O as a deuterium source at 110-180 °C for 24 h afforded the corresponding deuterated compounds with satisfactory efficiency of deuteration in moderate to excellent isolated yields. Furthermore, the Pd/C-H₂-D₂O system can be extended to the direct deuteration of biologically active compounds such as sulfamethazine, which is used as a synthetic antibacterial drug for fat stocks and would be applied as a general method for the preparation of the standard materials for the analysis of residual chemicals in foods and so on.     

A highly selective decarboxylative deuteration of carboxylic acids

In this paper, we report a mild and practical method for precise deuteration of aliphatic carboxylic acids by synergistic photoredox and HAT catalysis. The reaction delivers excellent D-incorporation (up to 99%) at predicted sites even in substrates bearing reactive C–H bonds or versatile functional groups. The use of a recirculation reactor with a peristaltic pump supports a scalable preparative ability (up to 50 mmol) under very mild reaction conditions. The practical and precise deuteration of readily available complex carboxylic acids makes this protocol promising for the preparation of deuterium-labelled compounds.

A scalable, practical and general method for precise deuteration of aliphatic carboxylic acids via synergistic photoredox and HAT catalysis has been developed. The use of recirculation reactor achieved the preparative scale deuteration.     

基于医用纱布负载的二氧化锰纳米颗粒用于亚甲蓝染料的去除

以医用纱布（medical gauze,MG）同时作为模板和还原剂,通过原位氧化还原反应,简便地制备了MG负载的MnO₂纳米颗粒（MnO₂ NPs/MG）,并对其形貌、成分进行表征。结果表明,MnO₂ NPs均匀地分散于MG纤维表面。结合MnO₂纳米材料的吸附性能和MG复合材料的操作便捷性,将MnO₂ NPs/MG进一步应用于亚甲蓝染料的去除。结果表明,在中性条件下,通过简单的浸泡搅拌,MnO₂ NPs/MG对亚甲蓝的去除率可达85.09%,并且可以通过增大吸附材料用量与染料初始浓度的比例提高去除率。等温吸附和动力学研究证明,MnO₂ NPs/MG对亚甲蓝的吸附符合Langmuir吸附等温模型和拟二级动力学模型。     

基于医用纱布负载的二氧化锰纳米颗粒用于亚甲蓝染料的去除

以医用纱布(medical gauze,MG)同时作为模板和还原剂,通过原位氧化还原反应,简便地制备了MG负载的MnO₂纳米颗粒(MnO₂ NPs/MG),并对其形貌、成分进行表征。结果表明,MnO₂ NPs均匀地分散于MG纤维表面。结合MnO₂纳米材料的吸附性能和MG复合材料的操作便捷性,将MnO₂ NPs/MG进一步应用于亚甲蓝染料的去除。结果表明,在中性条件下,通过简单的浸泡搅拌,MnO₂ NPs/MG对亚甲蓝的去除率可达85.09%,并且可以通过增大吸附材料用量与染料初始浓度的比例提高去除率。等温吸附和动力学研究证明,MnO₂ NPs/MG对亚甲蓝的吸附符合Langmuir吸附等温模型和拟二级动力学模型。