双单体固相共聚改性聚丙烯技术及其机理研究

在马来酸酐(MAH)固相接枝改性聚丙烯(PP)的过程中加入合适比例的异氰脲酸三烯丙酯(TAIC)作为共聚单体,可以大大提高MAH在PP上的接枝率,同时可以有效抑制在普通固相接枝过程中PP的严重降解,得到了性能较好的高极性PP.与普通固相接枝法与熔体接枝法对比,双单体固相共聚接枝改性PP是一种得到高极性PP的有效方法.本文同时对双单体在固相接枝反应中的作用机理进行了探讨.     

PP固相接枝改性研究进展

聚丙烯(PP)是一种具有优异性能且价格低廉的通用高分子材料,但由于聚丙烯为非极性聚合物,其染色性、亲水性、粘结性等均较差,且与其它材料的相容性也很差,这些缺点限制了聚丙烯的应用。通过固相接枝法改性聚丙烯,不仅可以在保持聚丙烯原有优异性能的情况下引入极性官能团,而且具有低温、低压、低成本、较高的接枝率和无需溶剂回收等优点。本文简要介绍了PP固相接枝反应机理,从接枝单体角度综述了近几年PP固相接枝改性的研究进展,并讨论了反应工艺对接枝产物的接枝率、接枝效率和性能的影响。     

在超临界CO_2中进行的PP固相接枝改性研究进展

由于性价比高,聚丙烯(PP)成为增长最快的通用塑料,在汽车工业、家用电器和管材方面得到了广泛地应用。然而由于聚丙烯自身的非极性限制了其在某些领域的应用,向聚丙烯主链上接枝极性单体是改善其极性的有效方法。常用的接枝改性方法有:溶液接枝、熔融接枝、等离子体处理、表面可控活性聚合以及超临界CO2状态下接枝等。其中超临界CO2由于溶解单体能力强,对聚合物基体也有很好的溶胀能力,且阻燃性好、无毒以及价格相对低廉,克服了传统接枝方法存在的操作工艺复杂,溶剂不易回收等缺点,得到了广泛研究。本文从超临界CO2协助固相接枝改性机理、接枝单体的选择、影响过程的因素以及超临界CO2协助固相接枝的应用等方面出发,系统阐述了超临界CO2协助PP固相接枝改性近些年来的研究概况。     

固相共聚接枝合成功能化聚丙烯及机理研究

通过马来酸酐 (MAH)和乙酸乙烯酯 (VAc)固相共聚接枝聚丙烯 (PP) ,在二者的投料摩尔比接近 1:1时 ,得到了高接枝率的多官能团功能化的PP .反应的机理是两单体摩尔比接近 1:1时容易形成较为稳定的过渡态 ,从而两者的共聚活性大大增加 ,接枝率大大提高 ,同时抑制了接枝产品熔体流动指数的增加 .这种含有多种官能团 (酸酐官能团和酯基官能团 )的极性PP对于拓展PP的应用范围 ,促进PP本身及其共混合金材料的功能化和高性能化有着重要的意义     

聚丙烯接枝改性及其挤出发泡研究

以有机过氧化物为引发剂,以双螺杆挤出机为反应器,将线型不饱和聚酯(ULP)接枝到聚丙烯(PP)分子链上。通过FTIR、DSC及凝胶含量测试,对MPP的结构和性能进行了研究,表明PP发生了接枝反应;泷变性能和熔体流动速率(MFR)测定表明,接枝反应有效地改善了PP流变性能,用双螺杆挤出机对未接枝和接枝的PP进行了发泡研究,SEM分析表明接枝PP具有更好的发泡效果。     

PP熔融接枝改性研究进展

聚丙烯作为一种非极性聚合物,其亲水性、染色性、粘结性及与其它极性聚合物和无机填料的相容性都很差,这大大限制了它的应用。因此,往往采用官能化的方法赋予聚丙烯以极性、反应活性和功能性。通过熔融接枝的方法,在聚丙烯链段上接枝极性单体,可以显著提高聚丙烯的极性,改善表面亲水性及染色性等。本文简要介绍了聚丙烯熔融接枝改性及其影响因素,并按接枝单体分类,综述了熔融接枝聚丙烯的研究进展、性能与应用,展望了其发展趋势。     

PP/PMMA/PP-g-MAH共混物的结晶和相形态研究

采用偏光显微镜和相差显微镜详细研究PP/PMMA不相容聚合物共混物体系和PP/PMMA/PP-g-PMMA增容共混体系的结晶和相形态.偏光显微照片的研究结果表明,增容剂PP-g-MAH中PP结晶需要克服更多的能垒,导致PP结晶形态变得不完善,球晶尺寸变小.比较PP/PMMA和PP/PMMA/PP-g-MAH的相差显微照片可以看出,由于增容剂的加入,PP与PMMA相之间的界面变得模糊,两相的相容性变好.随着PP-g-MAH中MAH接枝率的增加,PMMA分散相的尺寸减小且变得均匀;当增容剂的接枝率为2.41%,添加的质量分数为4.71%,PP/PMMA共混体系中PMMA分散相的相?尺寸可达最小.PP-g-MAH作为反应型增容剂,一方面与PP在界面区域产生共晶;另一方面,MAH极性基团与PMMA的极性基团间产生的强的化学键合作用,使得界面区域的PP-g-MAH分子采取有利于降低构象熵的构象来起到增容作用.PP/PMMA共混物在130℃等温结晶的结果显示,PMMA相对PP的结晶形态的影响较小,PP结晶呈现典型的均相成核特征.PP/PMMA共混体系中加入PP-g-MAH,PP结晶尺寸减少.与非等温结晶相比,等温结晶的PP/PMMA共混物中PMMA相区尺寸明显偏大.     

St存在下MAH熔融接枝PP机理的探讨

在哈克转矩流变仪和双螺杆挤出机中,对苯乙烯（St）存在下马来酸酐（MAH）熔融接枝聚丙烯（PP）进行了研究.实验表明：St的加入不仅可显著提高MAH的接枝率,而且可减少PP的降解;当St和MAH的摩尔比为1时,MAH接枝率最大.通过反应机理分析得出：没有St时,MAH主要以单分子形式在PP降解之后接枝到PP上;而在St存在下,St与MAH以交替接枝的形式或者配合物（CTC）形式在PP降解之前接枝到PP上,形成St和MAH交替聚合的长链.后者使MAH的接枝率增加,同时增大了PP的交联,减小了PP的降解.     

球形聚丙烯粒子固相接枝苯乙烯的研究

用负载型高效球形催化剂催化丙烯本体聚合获得了孔隙率较高的球形聚丙烯 (PP)粒子 .研究了苯乙烯在这种球形多孔PP粒子中的接枝聚合反应 ,考察了各种聚合条件对接枝率及接枝效率的影响 ,并用FTIR、DSC、GPC、粘度测定及偏光显微镜 (PLM)等方法表征了接枝聚合产物的结构和形态 .研究表明 ,球形PP粒子固相接枝苯乙烯不仅可达较高接枝率 (最高达 2 4 % )和接枝效率 (最高达 5 6 7% ) ,PS相区尺寸小、分布均匀 ,而且产物为形态规则的球形颗粒 ,有利于防止聚合物结块和粘壁 .但PP接枝PS后分子量有所下降 ,表明PP接枝PS的同时伴随着轻微的降解     

不饱和非极性合成橡胶接枝共聚改性研究进展

不饱和非极性合成橡胶本身具有优良的电绝缘性、高弹性、粘弹性,应用非常广泛.但其与基体的相容性差,耐油、有机溶剂性差,不耐热.含硅/不饱和非极性橡胶共聚物不仅兼备了含硅聚合物的诸多优良性能,而且能有效地提高与基体的相容性并提高橡胶的应用范围.本文以接枝共聚方法为主线,对接枝共聚机理进行了初步讨论,按接枝共聚引发方式对橡胶接枝改性进行了分类,同时介绍了接枝共聚产物的性能及应用,并对非极性不饱和橡胶接枝改性前景作简要展望.     

Graft copolymerization of maleic anhydride/styrene onto isotactic polypropylene using supercritical CO2

The free‐radical grafting of maleic anhydride (MAH) and styrene (St) onto isotactic polypropylene (iPP) was studied by thermal decomposition of dicumyl peroxide (DCP) using supercritical CO₂ as a solvent and swelling agent. Several effects of molar ratio of monomer, soaking temperature and time, reaction time, and reaction pressure on the graft degree were discussed. It was found that the addition of St to the grafting system as a comonomer could significantly enhance the graft degree of the grafted PP. Under the optimal reaction condition, the maximum of iPP grafting MAH and St in supercritical CO₂ medium was 10.58%. The chemical structures and properties of grafting copolymers were characterized by Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). The results showed that the supercritical CO₂ method had noticeable advantages over the existed method when compared, such as a lower temperature, a higher graft degree, easy separation, and environmentally benign. Copyright © 2007 John Wiley & Sons, Ltd.     

Grafting of glycidyl methacrylate onto polypropylene using supercritical carbon dioxide

Free-radical grafting of glycidyl methacrylate (GMA) onto polypropylene (PP) films has been studied using supercritical carbon dioxide (SC-CO₂) as a solvent and a swelling agent. As the reaction temperature was below the melting point, PP was modified in the solid phase. The PP film was first soaked with the monomer GMA and benzoyl peroxide (BPO) as an initiator using SC-CO₂ at different experimental conditions of pressure, temperature, and thermal treatment time. After releasing CO₂, film GMA molecules were grafted onto PP in different times. Using this method, the degree of grafting and the morphology could be controlled through the combination of pressure, temperature, and soaking time. FTIR spectra confirmed that GMA had been grafted onto PP and that polypropylene-graft-glycidyl methacrylate (PP-g-GMA) presented a high surface reactivity for conductive polyaniline anchoring. DSC measurements and TG analyses showed that the thermal profiles of the graft copolymer and virgin PP are quite similar and that the graft PP does not exhibit changes in terms of thermal degradation profile and melting temperature, respectively. X-ray data showed that a high degree of grafting leads to a lower degree of crystallinity of polypropylene.     

聚乙烯—丙烯酸与聚（2—乙基—2—恶唑啉）接枝共聚物的合成及表征

选用聚乙烯－丙烯酸（ＥＡＡ）为接枝母体,首先摸索出２－乙基－２－恶唑啉阳离子开环聚合的规律,得到高转化率端基为活性翁离子的聚（２－乙基－２－恶唑啉）（ＰＥＯＸ）,再与ＥＡＡ羟基侧基进行接枝反应,考察了开环聚合条件及接枝反应条件对接枝率的影响,在一定的条件下得到了接枝率〉２５％的聚乙烯－丙烯酸与聚（２－乙基－２－恶唑啉）的接枝共聚物（ＥＡＡ－ｇ－ＰＥＯＸ）。该接枝物用于聚对苯二甲酸丁醇酯／聚丙烯（Ｐ     

聚乙烯丙烯酸与聚(2-乙基-2-噁唑啉)接枝共聚物的合成及表征

选用聚乙烯 丙烯酸 (EAA)为接枝母体 ,首先摸索出 2 乙基 2 唑啉阳离子开环聚合的规律 ,得到高转化率端基为活性离子的聚 ( 2 乙基 2 唑啉 ) (PEOX) ,再与EAA羟基侧基进行接枝反应 ,考察了开环聚合条件及接枝反应条件对接枝率的影响 ,在一定的条件下得到了接枝率 >2 5%的聚乙烯 丙烯酸与聚 ( 2 乙基 2 唑啉 )的接枝共聚物 (EAA g PEOX) .该接枝物用于聚对苯二甲酸丁二醇酯 /聚丙烯 (PBT/PP)共混体系中作相容剂 ,可提高两者的相容性 .     

1,6-己二醇二丙烯酸酯和苯乙烯多单体熔融接枝制备长支链聚丙烯研究

采用哈克转矩流变仪制备了1,6-己二醇二丙烯酸酯(HDDA)和苯乙烯(St)多单体熔融接枝聚丙烯(PP)体系.红外测试结果表明St的加入能够促进HDDA接枝到PP主链,提高接枝率.动态流变行为研究结果也表明采用多单体熔融接枝PP更有利于体系在熔融接枝中生成长支链(LCB).随着St单体添加量的增加,HDDA的接枝率增大...     

聚丙烯粉料固相光接枝马来酸酐的研究

聚丙烯（ＰＰ）由于其优越的性能价格比而具有广泛的用途，但ＰＰ的非极性、易氧化等缺点使其在一些重要领域中的应用受到限制，因此需采用涂层法、等离子体处理、接枝法等方法对ＰＰ改性．其中ＰＰ表面接枝共聚法可使其脱去主链氢原子，引入极性基团，改善染色性和亲水性...     

显微镜图像分析研究聚丙烯/尼龙1010共混物相结构及其性能

用扫描电子显微镜图像分析研究了聚丙烯/聚酰胺1010共混物及其部分相容体系的相形态结构,计算了表征相结构和尺寸的结构参数,如分散相的平均直径、平均弦长和分散相的质心相关距等.并分别讨论了聚丙烯/聚酰胺1010共混物及其部分相容体系的相形态以及其结构参数与共混物组成的关系.测定了聚合物及其共混物体系的力学性能,讨论了共混物组成与力学性能的关系.聚丙烯/聚酰胺1010共混物的拉伸模量与组成的关系较为复杂,但其部分相容体系的拉伸模量与组成呈线性关系.聚丙烯/聚酰胺1010及其共混物体系的屈服强度与共混物组成均呈线性关系.表征相结构的两相平均弦长比(l-1/-l2)与组成以及共混物体系力学性能与组成的关系,二者相似.同时讨论了体系力学性能随相尺寸等的变化规律.     

Properties of polymer track membranes modified by grafting with poly(2-methyl-5-vinylpyridine) and poly(N-isopropylacrylamide)

The properties of track membranes (TM) based on poly(ethylene terephthalate) (PETP) and polypropylene (PP) and modified by radiation-induced graft polymerization of 2-methyl-5-vinylpyridine (MVP) andN-isopropylacrylamide (NIPAA) were studied. The rate of grafting and the limiting degree of grafting increase linearly as the pore diameter of TM increases. The gasdynamic and hydrodynamic pore diameters of modified TM were determined. The dependence of water permeability of TM modified by grafting with poly(2-methyl-5-vinylpyridine) (PMVP) on the degree of grafting passes through a maximum, which, according to the data of wetting angle measurements, corresponds to the maximum hydrophilicity. The negative χ-potential of TM changes sign after modification by grafting with PMVP. Thermosensitive TM based on PETP and PP were prepared by radiation-induced graft polymerization of NIPAA. The structure of modified TM was studied by electron microscopy and atomic force microscopy. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 5, pp. 858–864, May, 2000.     

超临界CO2固相接枝法制备马来酸酐改性聚丙烯的分级与表征

采用不同溶剂的连续萃取法,对超临界CO2固相接枝法制备的马来酸酐改性聚丙烯(PP-g-MAH)进行分级并获得了等规度不同的级份。对所得级份用傅立叶变换红外光谱仪(FT-IR)、差示扫描量热仪(DSC)和偏光显微镜(POM)表征,结果表明:接枝率不同的级份所对应的材料性能存在明显差异,接枝反应更易发生在非晶区或结晶不完善的区域,但接枝率越高的PP-g-MAH接枝越均匀。     

Study of the Impact Resistance of Physically and Dynamically Vulcanized Mixtures of PP/EPDM

Physically and dynamically vulcanized (TPV) mixtures of polypropylene (PP) and ethylene propylene diene terpolymer (EPDM) are prepared by extrusion in order to improve the impact resistance of PP. To enhance the chemical compatibility and provide better interaction between the PP and EPDM in the physical mixtures, both polymers are modified with maleic anhydride (MAH) in solution using xylene as solvent and dicumyl peroxide (DCP) as initiator. The qualitative and quantitative determination of the degree of grafting is study by Fourier Transform Infrared Spectroscopy (FTIR) and varying the amount of DCP and/or amount of MAH in order to determine the optimum amounts to obtain the highest degree of grafting. The effect of the relation of PP/EPDM, the amount of reinforcement filler and mix rate are studied for modified polymer mixtures (PP-g-MAH/EPDM-g-MAH). For the TPV of PP/EPDM the effects of amount and triallylisocyanurate (TAC) as coupling agent in presence of different amounts of DCP are studied. The physical mixtures of modified polymers prepared with a PP/EPDM ratio of 80/20 and the TPVs blends prepared with a PP/EPDM ratio of 70/30 and containing 15% filler at 60 rpm show the highest impact resistance. The impact resistance, melt flow index and hardness of the different mixtures are measured to determine their possible applications to prepare front panels and bumpers for automobiles by injection molding.