钼源对钼基催化剂芳构化性能的影响

 采用乙酸回流MoO3的方法制备了MoAC, 以其为钼源分别制备了Mo/HMCM-22, Mo/HMCM-49和Mo/HZSM-5催化剂,并考察了各催化剂在甲烷无氧芳构化反应中的催化性能. 结果表明,以MWW型分子筛(HMCM-22和HMCM-49)为载体时,催化剂的芳烃收率和催化剂稳定性均比传统浸渍法制备的催化剂明显提高; 而以HZSM-5为载体时,催化剂的甲烷无氧芳构化活性无明显变化.     

MoO3纳米带修饰MCM-22催化甲烷无氧芳构化反应

利用天然气生产芳烃是一个有吸引力的课题，这个过程需要具有高性能活性位点的催化剂，以活化稳定的碳氢键．在甲烷直接转化方法中，将甲烷无氧脱氢芳构化(MDA)转化为高附加值芳烃(如苯、甲苯和萘)是甲烷增值的有效途径．本研究采用MoO₃纳米带作为Mo源，微孔分子筛MCM-22作为载体制备双功能Mo基催化剂，结果表明MoO₃纳米带高度分散在分子筛内部，与分子筛中Br?nsted酸中心结合形成有效活性中心，改善了甲烷无氧脱氢芳构化反应的催化活性，提高了催化剂的稳定性．在甲烷无氧脱氢芳构化反应测试中，当MoO₃纳米带的负载量质量分数为6%时，N-Mo-HMCM-22催化剂催化的甲烷转化率达到14.1%，苯产率可达8.2%．本研究为合成高性能、稳定的MDA催化剂提供了一种更为简易的策略．     

耐硫甲烷化中H2S浓度对MoO3/Al2O3和CoO-MoO3/Al2O3催化剂的影响

在0 到12 mL·L^-1 (体积分数φ=0.00%-1.20%) 范围内考察了不同H₂S 浓度对25% (质量分数, w)MoO₃/Al₂O₃和5% (w) CoO-25%MoO₃/Al₂O₃催化剂甲烷化性能的影响. 结果表明, 5%CoO-25%MoO₃/Al₂O₃的甲烷化活性随H₂S浓度的增加单调上升, 而25%MoO₃/Al₂O₃对H₂S浓度并不敏感. 对比这两种催化剂发现, 只有在H₂S浓度高于0.40% (φ) 时, 在25%MoO₃/Al₂O₃中添加Co助剂才会有促进作用; H₂S浓度低于0.40% (φ)时, Co助剂会抑制25%MoO₃/Al₂O₃催化剂的甲烷化活性. 分别对反应前后的催化剂表征发现, H₂S浓度的改变不会对两种催化剂的物理结构产生明显的影响, 而是通过影响催化剂表面的金属硫化物活性位来影响催化剂的甲烷化性能. 耐硫甲烷化反应体系中较高的硫含量下Co助剂才表现出对25%MoO₃/Al₂O₃催化剂的促进作用. 该研究明确了在MoO₃/Al₂O₃催化剂中添加Co助剂的硫化氢浓度范围, 为工业上选择合适的催化剂提供了依据.     

N掺杂Mo/HZSM-5催化剂制备及对甲烷无氧芳构化催化性能影响

采用三聚氰胺作为N源,N掺杂改性HZSM-5沸石分子筛后负载Mo活性金属组分,制备了一种用于甲烷无氧芳构化反应(MDA)的催化剂。采用XPS、N_2吸附-脱附、XRD、H2-TPR、TEM和NH3-TPD对催化剂性质和Mo金属组分状态进行了分析表征,并考察了催化剂的甲烷无氧芳构化反应催化性能。结果表明,HZSM-5经过N掺杂改性后,会在分子筛表面生成一层含氮基团,有序调控了分子筛的酸性位点;同时会诱导Mo金属组分在催化剂表面更好的锚定落位。此方法制备的Mo/HZSM-5-CN催化剂能有效提高MDA反应的甲烷转化率和芳烃选择性,减缓了积炭的生成,展现出更优良的催化性能。     

Mo/HZSM-5催化剂载体对甲烷无氧芳构化反应的影响

着重研究了挤条成型的纳米Mo/HZSM-5催化剂在甲烷无氧芳构化反应中的催化性能.结果表明,Al2O3载体的加入减少了催化剂的B酸量,对甲烷无氧芳构化反应不利,导致甲烷转化率降低,并且催化剂积碳严重.通过适量添加SiO2载体,减少Al2O3载体的量,可以使催化剂的B酸量提高,从而可提高甲烷转化率,并且可降低催化剂的积碳量.     

预处理条件对Mo/HZSM-5和Mo-Zn/HZSM-5甲烷芳构化性能的影响

甲烷无氧芳构化 ,具有选择性高、技术简单及产物易分离等特点 ,已引起人们的广泛关注 [1,2 ] .Mo/HZSM- 5是芳构化的良好催化剂 ,为了探讨预处理条件对反应的影响 ,我们对不同预处理条件下的 Mo/HZSM- 5及 Zn改性的 Mo/HZSM- 5催化剂上的甲烷无氧芳构化反应进行了研究 ,并以热重法对催化剂的稳定性进行了表征 .1实验部分1 .1原料和试剂钼酸铵 ( A.R.级 ) ,乙酸锌 ( A.R.级 ) ,铵型ZSM- 5分子筛 (硅铝比为 5 0～ 70 ) .1 .2催化剂制备铵型 ZSM- 5分子筛于 81 3K、空气气氛下焙烧3h,即成 HZSM- 5分子筛 .以一定浓度的钼酸铵溶液…     

甲烷在Mo/HZRP-1催化剂上无氧脱氢芳构化反应 Ⅰ.Mo/HZRP-1催化剂的催化性能和积炭行为

用高硅含磷五员环沸石分子筛(商品代号HZRP-1)作为载体,制备了Mo/HZRP-1催化剂.与Mo/HZSM-5相比,Mo/HZRP-1对甲烷无氧脱氢芳构化反应也表现出较好的催化性能.实验过程中,在反应气中添加N2作为内标物,给出包括甲烷在Mo/HZRP-1上的结焦量、转化率及各产物选择性在内的总碳物料平衡计算结果.考察了不同Mo担载量对催化剂性能和积炭行为的影响;重点考察了不同温度焙烧后20%Mo/HZRP-1催化剂的性能和积炭行为.在反应的初始阶段,6%Mo/HZRP-1表现出很高的活性:反应进行30 min时,甲烷转化率为11%,芳烃选择性达81%,而催化剂的结焦选择性仅为12%.BET,NH3-TPD和催化反应等表征结果表明:Mo物种的数量和状态,分子筛的酸强度和酸量以及分子筛的孔道结构是决定甲烷无氧脱氢芳构化反应性能和积炭行为的关键因素.     

甲烷芳构化反应催化剂的研究——Mo-M/HZSM-5在无氧条件下的催化性能和表面性质

苯;甲烷芳构化反应催化剂的研究——Mo-M/HZSM-5在无氧条件下的催化性能和表面性质     

A New Way to Obtain Mo/HZSM-5 Catalyst with High Activity and Selectivity for Methane Dehydro-aromatization 一种制备高活性和高稳定性甲烷无氧芳构化Mo/HZSM-5的新方法

 采用气相化学沉积法对HZSM-5分子筛的外表面进行选择性修饰,然后将它作为载体制备Mo/HZSM-5 催化剂,并应用于甲烷无氧脱氢芳构化反应. 改性的催化剂比未改性的催化剂表现出更好的甲烷转化活性、芳烃选择性和稳定性,明显地抑制了积碳的生成. 利用核磁氢谱对催化剂进行了表征. 在未经改性的Mo/HZSM-5催化剂表面,平均每个晶胞中含有1.12个B酸中心, 而在改性后的催化剂表面,平均每个晶胞中只有0.61个B酸位. 说明在甲烷无氧芳构化反应中,少量的B酸中心即可达到反应要求,过多的酸性位只会导致更多积碳物种的生成,从而加快催化剂失活速度,降低其稳定性.     

Mo-Zn/HZSM-5催化剂上甲烷与丙烷混合物的无氧芳构化

研究了甲烷和丙烷的混合气体在x%Mo+6%Zn/HZSM-5催化剂上(x=0.3,0.5,0.7,0.9)的无氧芳构化反应性能.结果表明,在873K,GHSV=3L/(g·h)和n(C₁)/n(C₃)=1.0条件下,甲烷的转化率在29%～35%之间,芳烃选择性大于80%.其中0.7%Mo+6%Zn/HZSM-5对甲烷表现出最优的活性,甲烷转化率达到34.8%,丙烷转化率为69.6%.探讨了反应时间和n(C₁)/n(C₃)比对甲烷和丙烷转化率及其产物分布的影响.结果显示,丙烷的存在促使甲烷活化并参与芳构化反应.同位素13^CH₄示踪实验发现,13^C进入了C₆H₆⁺,C₇H₈⁺和C₈H₁₀⁺碎片中,进一步证实了甲烷进入芳烃形成过程.此种用丙烷活化甲烷的过程可能为天然气和炼厂气的直接利用提供了一个新的反应途径.     

甘油辅助HZSM-5分子筛的制备及其甲烷无氧芳构化催化性能研究

以正硅酸乙酯(TEOS)为硅源,甘油为辅助剂,在水热条件下合成HZSM-5分子筛。考察甘油添加量、晶化时间对HZSM-5分子筛的晶粒尺寸、相对结晶度和酸性等性质及其甲烷无氧芳构化催化性能的影响。利用X射线衍射(XRD)、扫描电镜(SEM)、氨程序升温脱附(NH_3-TPD)等分析手段对不同条件合成的HZSM-5分子筛样品进行表征。结果表明,在添加一定量的甘油辅助剂的条件下,通过调控晶化时间,可以提升HZSM-5分子筛的相对结晶度,在一定程度上抑制无定型SiO_2的产生,增加其酸量。在甲烷无氧芳构化反应中,甘油辅助合成的HZSM-5分子筛催化剂表现出优良的催化性能,与未添加甘油合成的HZSM-5分子筛催化剂相比,甲烷转化率、苯选择性和芳烃选择性均有较大提高,且具有较强的稳定性与容炭能力。     

Methane dehydrogenation and aromatization in the absence of oxygen on Mo/HZSM-5: A study on the interaction between Mo species and HZSM-5 by using Al and Si MAS NMR

By using a high-resolution solid state nuclear magnetic resonance spectrometer with ²⁷Al and ²⁹Si probes, the interaction between Mo species and HZSM-5 of frsol|Mo/HZSM-5 catalysts has been studied. The results show that there is a strong interaction between Mo species and HZSM-5 zeolite. The framework aluminum in the zeolite can be easily extracted by the introduction of Mo species. The extractability of framework aluminum by Mo species increases with increasing Mo loading and the calcination temperature. The extraction process leads to the formation of non-framework Al at first and then a new crystalline phase of Al₂(MoO₄)₃. The dealumination of the catalyst having a Mo loading of 15% and had been calcined at 973 K is so severe that all the aluminum in the framework are extracted and no framework Al could be detected by ²⁷Al MAS NMR. The catalyst, therefore, lost its catalytic activity for methane dehydrogenation and aromatization in the absence of oxygen. The Si/Al ratio measured from ²⁹Si MAS NMR further confirms the dealumination process observed by ²⁷Al MAS NMR. The MAS NMR results give us an evidence that Al₂(MoO₄)₃ crystallites are much less active for the reaction.     

Influence of Pretreatment Conditions on Methane Aromatization Performance of Mo／HZSM—5 and Mo—Cu／HZSM—5 Catalysts

Mo/HZSM-5 is a good catalyst for methane aromatization, and the reaction performance of Mo/HZSM-5 and Cu modified Mo/HZSM-5 catalysts under various pretreatment conditions has been studied. The results indicate that the catalyst presented a distinguished catalytic activity, benzene selectivity and a high stability when the bed temperature was raised in N2 atmosphere.     

HZSM-5/SAPO-11复合分子筛的制备、 表征及在异丁烷芳构化反应中的催化性能

将经聚二烯丙基二甲基氯化铵(PDDA)预处理的HZSM-5分子筛置于SAPO-11分子筛的合成母液中, 在水热体系中原位制备了一系列HZSM-5/SAPO-11复合分子筛, 并对分子筛的结构、 形貌及酸性进行了表征, 考察了其在异丁烷芳构化反应中的催化性能. 结果表明, 所得复合分子筛由HZSM-5表面包覆约20 nm的SAPO-11微晶组成, 且通过调变SAPO-11的Si含量可以有效调变复合分子筛的酸性, 提高芳构化强弱酸协同催化作用, 有效抑制裂解副反应. 结合异丁烷芳构化转化率及液体收率结果可知, 当SAPO-11合成溶胶中硅铝摩尔比为0.6时, HZSM-5/SAPO-11复合分子筛的芳构化活性及稳定性最佳.     

Relationship between the molybdenum phases and the conversion of n-butane over Mo/HZSM-5

The conversion of n-C₄H₁₀ was undertaken on MoO₃/HZSM-5 catalyst at 773–973 K and the phases of molybdenum species were detected by XRD. The XRD results show that bulk MoO₃ on HZSM-5 can be readily reduced by n-C₄H₁₀ to MoO₂ at 773 K and MoO₂ can be gradually carburized to molybdenum carbide above 813 K. The molybdenum carbide formed from the carburization of MoO₂ with n-C₄H₁₀ below 893 K is -MoC_1−x with fcc-structure, while hcp-molybdenum carbide formed above 933 K. During the evolution of MoO₃ to MoO₂ (>773 K) or the carburization of MoO₂ to molybdenum carbide (>813 K), deep oxidation, cracking and coke deposition are serious, in particular at higher reaction temperatures, these lead to the poor selectivity to aromatics. Aromatization of n-C₄H₁₀ can proceed catalytically on both Mo₂C/HZSM-5 and MoO₂/HZSM-5, the distribution of the products for the two catalysts is similar below 813 K, but the activity for Mo₂C/HZSM-5 is much higher than that for MoO₂/HZSM-5.     

Aromatization of methane by using propane as co-reactant over cobalt and zinc-impregnated HZSM-5 catalysts

The activities of the cobalt and zinc-impregnated HZSM-5 catalysts to the non-oxidative conversion of propane (C3) and methane (C1) into aromatic hydrocarbons were evaluated using a fixed-bed microreactor. C1 conversion reached 36.7% and the selectivity of aromatic products reached above 88.7% at atmospheric pressure, weight (hourly) space velocity (WHSV) 1.6 g h⁻¹/(g cat)⁻¹ and 873 K. The influence of the acidity and the ratio of cobalt in the catalyst on the conversion of methane and propane was evaluated. C1 incorporation was conclusively confirmed by the mass spectral analyses of aromatic products produced in a run with ¹³CH₄ which shows a significant ¹³C enrichment in the C₆H₆⁺, C₇H₈⁺ and C₈H₁₀⁺ fragments. The methane activation could result from its hydrogen-transfer reaction with alkenes. These catalysts were thoroughly characterized using XRD, N₂ adsorption measurements, TPD of NH₃, and FT-IR. The results showed that the activation of methane in low temperature was due to existence of propane. The acidic changes and micropore area of the catalyst severely affected aromatization, and resulted in drastic modifications in product distribution. From this work, we found that only a small fraction of tetrahedral framework aluminum, which corresponds to the Bronsted acid sites, is sufficient to accomplish the aromatization of the intermediates in methane and propane aromatic reaction, while the superfluous strong Bronsted acid sites, which can be decreased by adding Co and Zn, are showed to be related with the aromatic carbonaceous deposits on the catalysts. The density of acidic site and the strength of strong acid decreased when the concentration of Co and Zn in the catalyst increased. Therefore, a much higher benzene yield and a longer durability of the catalysts are obtained when compared with the conventional HZSM-5 catalysts.     

HZSM-5分子筛上C_(6～8)混合链烃和邻二甲苯的加氢裂化

在连续流动固定床装置上,探讨了不同酸性HZSM-5上C6~8混合链烃(以下简称混合烃)和邻二甲苯加氢裂化的变化规律,并在稳定条件下考察了反应温度、质量空速以及氢烃体积比等反应参数的影响。混合烃的加氢裂化伴随着芳构化反应,酸性较弱的HZSM-5主要发生加氢裂化反应,裂化产物以正构烷烃为主,甲烷和异构烷烃较少。酸性强的HZSM-5上,起初以芳构化反应为主,稳定之后产物分布与弱酸催化剂接近。混合烃的加氢裂化反应表现出明显的温度效应,而质量空速和氢烃体积比的影响较小。在380℃、3.0 MPa、质量空速1.02 h-1、氢烃体积比1 000的条件下,100 h内混合烃的转化率均在99%以上,稳定的裂化反应选择性在95%以上。邻二甲苯发生加氢裂化及异构、歧化反应,酸性强的HZSM-5裂化产物收率高,裂化产物分布与混合烃的基本相同。稳定的邻二甲苯裂化反应选择性小于10%。     

Zn-Co bimetallic supported ZSM-5 catalyst for phosgene-free synthesis of hexamethylene–1,6–diisocyanate by thermal decomposition of hexamethylene–1,6–dicarbamate

A set of mono-and bimetallic(Zn-Co) supported ZSM-5 catalysts was first prepared by PEG-additive method. The physicochemical properties of the catalysts were investigated by FTIR, XPS, XRD, N_2adsorption-desorption measurements, SEM, EDS and NH3-TPD techniques. The physicochemical properties showed that the Zn Co_2O_4 spinel oxide was formed on the ZSM-5 support and provided effectual synergetic effect between Zn and Co species for the bimetallic catalyst. Furthermore, bimetallic supported ZSM-5 catalyst exhibited weak, moderate and strong acidic sites, while the monometallic supported ZSM-5 catalyst showed only weak and moderate or strong acidic sites. Their catalytic performances for thermal decomposition of hexamethylene–1,6–dicarbamate(HDC) to hexamethylene–1,6–diisocyanate(HDI) were then studied. It was found that the bimetallic supported ZSM-5 catalysts,especially Zn-2Co/ZSM-5 catalyst showed excellent catalytic performance due to the good synergetic effect between Co and Zn species, which provided a suitable contribution of acidic sites. HDC conversion of 100% with HDI selectivity of 91.2% and by-products selectivity of 1.3% could be achieved within short reaction time of 2.5 h over Zn-2Co/ZSM-5 catalyst.     

HF改性的Pt/ZSM-5催化剂在苯和甲醇烷基化反应中的应用

以HF改性的Pt/ZSM-5为催化剂,研究了其在苯和甲醇烷基化反应的应用,并用XRD、NH₃-TPD、BET等表征方法研究了改性前后催化剂酸性和孔结构变化。 结果表明,经HF改性后,Pt/ZSM-5催化剂的酸性增强、酸量增加,苯和甲醇烷基化反应性能明显提升。 3%HF-0.2%Pt/ZSM-5催化剂催化苯和甲醇烷基化反应时,甲苯和二甲苯选择性达到92.20%。 但是,HF负载量大于6%时,HF脱除的部分骨架硅和骨架铝会堆积在催化剂孔道内部,限制了反应物和产物的扩散,造成其催化性能下降。 通过计算得到了HF改性的Pt/ZSM-5催化剂上苯和甲醇烷基化反应的活化能为118 kJ/mol。