无机纳米材料表面引发自由基可控聚合反应

无机纳米-高分子杂化材料具有优异的性能及广阔的应用前景,引起人们的广泛关注.本文综述了无机纳米材料表面引发自由基可控聚合反应在合成无机-高分子纳米杂化材料方面的广泛应用,包括表面引发原子转移自由基聚合(ATRP)、表面引发可逆加成-断裂链转移自由基聚合(RAFT)、表面引发稳定氮氧自由基聚合(NMP). 着重总结了近几年来这类杂化材料在功能性研究上新的进展,并对今后研究的发展趋势进行了展望.     

无机纳米粒子表面引发接枝聚合

无机纳米粒子表面引发聚合反应是无机纳米粒子—有机聚合物杂化复合材料制备的一种重要途径。分子自组装技术的发展使得各种类型的聚合反应都有转移至无机纳米粒子表面进行的可能。本文综述了表面引发聚合反应用于制备高键合密度的聚合物接技无机纳米粒子的研究进展。     

γ辐照引发无皂乳液聚合法一步合成Ag-聚4-乙烯基吡啶杂化微凝胶

无机-聚合物纳米复合材料是将聚合物与一种或多种无机纳米粒子复合而成的一种材料,它同时具有无机纳米粒子和聚合物的优良特性,在许多重要技术领域具有广泛的应用前景.近20年来,无机-聚合物纳米复合材料的制备及应用备受关注[1~6].包括杂化微凝胶在内的纳米复合微球是无机-聚合     

聚合物纳米杂化高性能光功能材料

近年来材料科学与技术的不断发展,对光学材料提出了高性能化和多功能化的需求,为此,研究者们结合传统有机聚合物光学材料和无机光学材料的优势,提出了备受关注的聚合物纳米粒子杂化的策略.本文首先概述了针对杂化材料透光性进行控制的杂化方法,指出杂化方法的选择很大程度上与材料性质尤其是纳米相的性质相关,而杂化方法的目的则在于实现纳米杂化材料的透光性控制,纳米杂化光功能材料实现功能的前提即为透光性.随后,分别介绍了聚合物纳米杂化策略在高折射率材料与发光材料中的应用.对于高折射率材料,总结了提升材料折射率的不同策略.对于发光材料,总结了基于聚合物相和纳米相之间不同的相互作用而采用各种杂化方式以及相关的性能提升.接下来,讨论了聚合物纳米杂化光功能材料在光学和机械、热学、表面性能方面的调控手段和性能提升的策略.最后,提出了下一代光学杂化材料所面临的困难与挑战,以进一步推动这一领域的发展.     

由铜-胺氧化还原引发反应一步法简便制备TiO_2表面接枝聚甲基丙烯酸甲酯纳米杂化粒子

提出并验证了一种通过普通自由基聚合在纳米TiO2表面接枝聚甲基丙烯酸甲酯的简单方法.通过在纳米TiO2粒子表面引入伯胺分子层(纳米TiO2-NH2粒子),利用Cu2+-胺氧化还原体系实现了CuSO4催化纳米TiO2-NH2粒子表面引发甲基丙烯酸甲酯(MMA)的自由基接枝聚合,从而一步得到表面固定有聚甲基丙烯酸甲酯链的纳米TiO2杂化粒子(纳米TiO2-PMMA杂化粒子).红外光谱、热失重分析与电镜的结果都表明PMMA已经被接枝到纳米TiO2粒子表面,且接枝率随着聚合时间的延长而逐渐增大,PMMA链的引入有助于降低纳米TiO2粒子微球的团聚程度、增强与有机溶剂分子的范德华力,从而提高分散稳定性.反应溶液中没有游离均聚物形成.     

聚合物与纳米晶的杂化及性能优化

聚合物-纳米晶杂化材料因结合了有机和无机材料的优点而逐渐地受到了人们普遍的关注,聚合物为纳米晶的形成与生长提供了优良的环境,纳米晶的引入同样也增加和强化了聚合物的功能特性.如聚硫代氨基甲酸酯与TiO2杂化的高折射率薄膜,该薄膜不仅保持了原有的性能,而且有较高的折射率.此外,还有许多不同纳米粒子与不同聚合物的杂化体系.如...     

荧光无机/有机杂化纳米分子口袋的构建

利用能量匹配原则将无机半导体ZnO纳米粒子与有机半导体四苯基卟啉四羧酸(TCPP)分子进行组装, 在无机-有机组分之间的界面构建了杂化纳米分子口袋ZNPs-TCPP, 该纳米分子口袋对四苯基卟啉(TPP)分子具有高选择性识别功能, 同时其荧光增强了5倍以上, 并成功地将该杂化纳米分子口袋用于肺腺癌细胞(A549)的细胞成像.     

氧化石墨烯在仿生合成中的应用及研究

氧化石墨烯薄片的边缘含有大量的含氧功能团(如羧基等),这些官能团可以有效地与金属离子作用而成为晶体的成核位点,从而使得氧化石墨烯具备模板功能而用于仿生合成。论文综述了氧化石墨烯用作模板剂在仿生合成有机/无机杂化材料方面的应用研究进展,介绍了其基本原理,阐述了不同类型杂化材料的制备方法,并展望了石墨烯基有机/无机杂化材料的发展新趋势。     

由聚合物门控的介孔二氧化硅基刺激响应性药物递送系统

本文主要介绍了以聚合物体系作为门控构筑的基于介孔二氧化硅纳米粒子的刺激响应性药物控释体系, 并根据聚合物类别将门控体系分为聚合物刷、 聚合物交联网络和聚合物包裹层三类. 根据聚合物“阀门”与无机纳米粒子的共价或非共价连接方式, 综述了这些杂化材料在不同外界刺激作用下的药物控制释放行为, 并给出该领域所面临的机遇和挑战.     

基于点击化学和活性自由基聚合方法制备双重响应金纳米粒子

采用点击化学和可逆加成断裂链转移活性自由基聚合方法制备了温度和pH双重响应的金纳米粒子. 通过红外光谱(FTIR)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)及热重分析(TGA)等方法对双重响应性金纳米粒子进行了表征. 该金纳米杂化粒子具有良好的分散性, 其表面接枝聚合物的密度约为0.6 Chain/nm2. 通过改变温度和pH条件, 考察了金纳米杂化粒子的可逆响应行为. 实验结果表明, 点击化学和可逆加成断裂链转移活性自由基聚合方法实现了金纳米粒子修饰的简单化、可控化以及功能化.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.