聚芴类半导体光谱稳定性

有机半导体的物理和化学性质直接影响其光电器件的性能, 这为物理化学提出了新的研究内容与挑战. 其中, 聚芴类蓝光二极管的光谱稳定性及低能发射带(LEEB)的起源问题是国际上近十年的热点问题之一. 本文系统概述了低能发射带的现象、表征方法以及可能的形成机理, 包括链间作用导致的激基缔合物发射、器件制备或降解过程形成的芴酮缺陷发射、芴酮聚集态发射以及聚芴端羟基界面氧化导致的绿光发射. 本文综述各种物理掺杂和界面调控改善聚芴类二极管蓝光稳定性的策略, 着重论述非平面基团的空间位阻、分子构象与链的拓扑结构以及引入抗氧化受阻胺光稳定剂来提高其光谱稳定性策略.     

一种受阻胺封端的聚芴蓝光材料的合成及其稳定性研究

以五甲基哌啶醇、对溴苯酰氯为原料合成了一种受阻胺抗氧稳定剂,通过Suzuki反应将其封端到聚(9,9-二辛基)芴上.通过核磁共振谱、凝胶渗透色谱对合成材料的分子结构进行了表征;并利用荧光发射光谱和退火方法,对其光谱热稳定性进行了细致研究.实验结果表明,当在聚芴分子链上引入受阻胺五甲基哌啶醇后,其荧光发射光谱的稳定性显著提高,绿光区发射现象明显减弱.     

含空间位阻基团的超支化聚芴的合成、表征及稳定性研究

以1,3,5-间三溴苯和三(4-溴苯基)胺为支化核,引入9,10-二溴蒽和2,7-二溴-螺(芴-9,9-氧杂蒽)通过Suzuki反应与芴分别共聚,得到4种不同结构的超支化聚芴蓝光材料,对其结构及光物理性质进行了表征,根据退火前后荧光光谱的变化对其光谱热稳定性进行了研究.实验结果表明,引入超支化结构和高位阻基团,聚芴的荧光发射光谱热稳定性显著提高,绿光区发射现象几乎完全被抑制.     

电致蓝光芴取代聚芴的合成与光谱稳定性

为了筛选高效稳定的聚合物电致蓝光材料, 设计合成了三苯胺和芴取代的二芳基芴单体, 并通过Suzuki缩聚合成了交替共聚物TPAFF-co-F和TPAFF-co-P. 将二辛基芴引入聚芴的9位可以增加其溶解度, 同时具有屏蔽主链和减少主链芴9位被氧化的作用, 三苯胺基团将有利于提高空穴在阳极界面的注入能力. 200 ℃下空气中退火24 h实验表明, 在相同条件下, 绿光指数(Igreen/Iblue)顺序为聚(9,9-二辛基芴)(1.07)>TPAFF-co-F(0.65)>TPAFF-co-P (0.47), 证明了烷基芴引入减少了主链氧化的几率. 还制作了发光二极管器件, 其结构为ITO/PEDOT:PSS(40 nm)/TPAFF-co-F或TPAFF-co-P(80 nm)/Ba(4 nm)/Al(120 nm). 在高电流密度下它们保持了良好的光谱稳定性, 在547 mA·cm-2电流密度下, TPAFF-co-F的CIE(国际发光照明委员会)坐标为(0.22, 0.24), TPAFF-co-P的CIE坐标为(0.24, 0.26), 后者的电流效率为0.712 cd·A-1.     

基于芴的蓝色电致发光材料研究进展

新型有机及高分子光电材料的制备与器件设计是目前国际上一个十分活跃的领域。与液晶平面显示器相比,有机和高分子电致发光平面显示器（OLED和PLED）具有主动发光、无角度依赖性、对比度好、轻、薄、能耗低等显著特点,具有广阔的应用前景。红、绿、蓝3原色是实现有效全色显示的必备条件。与红光和绿光材料相比,蓝光材料的效率、稳定性和色纯度都与前两者相去甚远。开发好的蓝光材料不仅可以作为OLED或PLED中的发光层,还可作为主体来掺杂制备绿光和白光光源。在蓝光材料中,基于芴的齐聚物和高分子拥有良好的热稳定性、高荧光量子效率和优异的电致发光特性,但其存在电荷注入与传输困难、易发生聚集、C9位易被氧化等缺点,这些缺点正是导致器件效率低、色纯度低、光谱稳定性差的原因。综述了基于芴的蓝光小分子和高分子的研究进展,主要针对含有电子给体、受体的齐聚芴和聚芴的材料设计、合成及电致发光性能,结果表明,既含空穴传输又含电子传输片段的材料比相应的只含电子给体或受体的材料性能更佳。     

一步法合成螺双芴及螺氧杂蒽衍生物及其在有机发光二极管中的应用:性能增强及相关的光学现象（英文）

以芴为原料,以钯为催化剂一步合成了2-(9-苯基芴基)-9,9′螺二芴(PF-SBF)。以PF-SBF作为有机发光二极管的发光及主体材料(FIrpic为磷光客体)时,观察到了不同于PF-SBF及FIrpic发光的红光带。这分别源于PF-SBF分子间的聚集和发光层/传输层诱导的激基复合物。通过选择合适的空穴和电子传输层,有效抑制了激基复合物的发光。同时,PF-SBF和TAPC双主体的结构不仅实现了纯FIrpic和Ir(ppy)_3蓝光和绿光,还大幅提升了器件性能。蓝光、绿光器件的最大电流效率和最大亮度分达到16.7、50.5 cd?A~(-1)和7857 cd?m~(-2)(11 V)、23390 cd?m~(-2)(8 V)。另外,除了PF-SBF,利用相似的合成方法,我们也合成了2-(9-苯基芴基)-9,9′螺芴氧杂蒽(PF-SFX),其较大的三线态能级(2.8 eV)较PF-SBF更适合做蓝光主体。以TAPC和PFSFX为双主体的器件最大电流效率提升到了22.6 cd?A~(-1)。所有实验结果均表明,PF-SBF和PF-SFX是构建高效绿光/蓝光磷光主体材料的有效结构单元。     

聚芴材料低能级发射现象及其机理研究现状

聚芴是一类重要的蓝光发射材料,有高亮度、高效率等优点;然而聚芴类材料在发光器件中使用一段时间之后,光致发光光谱在530～550 nm、电致发光光谱在2.2～2.3e V的区域出现新的发射带,使得器件的发射变成绿光或蓝绿光,在色度失纯的同时,器件的发光效率也迅速降低.本文概述了目前提出的有关聚芴材料低能级发射形成的原因的假说、试验依据、理论计算、以及基于假说所提出的消除低能级发射、改善材料发射稳定性的方法等研究现状.     

一步法合成螺双芴及螺氧杂蒽衍生物及其在有机发光二极管中的应用：性能增强及相关的光学现象关

以芴为原料,以钯为催化剂一步合成了2-(9-苯基芴基)-9,9′螺二芴(PF-SBF)。以PF-SBF作为有机发光二极管的发光及主体材料(FIrpic为磷光客体)时,观察到了不同于PF-SBF及FIrpic发光的红光带。这分别源于PF-SBF分子间的聚集和发光层/传输层诱导的激基复合物。通过选择合适的空穴和电子传输层,有效抑制了激基复合物的发光。同时,PF-SBF和TAPC双主体的结构不仅实现了纯FIrpic和Ir(ppy)3蓝光和绿光,还大幅提升了器件性能。蓝光、绿光器件的最大电流效率和最大亮度分达到16.7、50.5 cd·A^-1和7857 cd·m^-2(11 V)、23390 cd·m^-2(8 V)。另外,除了PF-SBF,利用相似的合成方法,我们也合成了2-(9-苯基芴基)-9,9′螺芴氧杂蒽(PF-SFX),其较大的三线态能级(2.8 eV)较PF-SBF更适合做蓝光主体。以TAPC和PFSFX为双主体的器件最大电流效率提升到了22.6 cd·A^-1。所有实验结果均表明,PF-SBF和PF-SFX是构建高效绿光/蓝光磷光主体材料的有效结构单元。     

N-苯基咔唑取代的蓝光聚(2,7-咔唑)的合成与表征

采用Suzuki聚合方法并通过改变催化剂的投料量,合成了一系列具有不同分子量的N-苯基咔唑取代的蓝光聚(2,7-咔唑),并详细研究了分子量对聚合物的光物理、电化学和电致发光器件性质的影响.结果表明,刚性N-苯基咔唑侧链的引入,能够有效地调控主链之间的相互作用,提高蓝光的色纯度,并使得该系列聚合物的固态荧光量子效率高达0.40.同时,在热退火及器件工作过程中,没有观察到类似聚芴中绿光峰的出现,表明具有良好的光谱稳定性.单层聚合物电致发光器件的最大发光效率为0.33 cd/A,色坐标为(0.18,0.12).     

绿色单峰发光聚(9,9-二烯丙基芴)的合成及其发光机制

为了得到绿色单峰发光的聚合物材料, 我们设计并合成了9位取代的二烯丙基芴单体, 在NiCl₂的催化下, 合成了可溶的聚芴衍生物, 聚(9,9-二烯丙基芴)(PAF). 较短的烯丙基链既可以增加聚芴的溶解度, 双键的存在又有利于聚芴发生分子间聚集而得到绿光发射的有机电致发光器件(OLED). PAF在溶液和薄膜状态下的荧光峰分别位于403和456 nm的蓝光区域, 而其器件ITO/PEDOT:PSS/PAF/LiF/Al(其中, ITO为氧化铟锡, PEDOT为聚(3,4-乙撑二氧噻吩), PSS为聚苯乙烯磺酸盐)的电致发光峰却红移至绿光区域(532 nm), 得到绿色单峰发光. 紫外吸收光谱、荧光发射光谱、红外光谱以及原子力显微镜(AFM)图像的结果证明, 造成PAF电致发绿光的机制为聚合物分子间聚集.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.