纳米TiO_2的制备及其改性和应用研究进展

简要介绍了TiO2纳米材料的制备、改性方法及其应用;其制备方法包括气相法和液相法,液相法又包括溶胶-凝胶法、水热/溶剂热法、液相沉积法和微乳液法;其改性主要包括贵金属沉积、离子掺杂、染料敏化和半导体复合;其应用领域则主要包括光催化、光伏电池和光解水.     

SAPO-34分子筛的制备及其催化应用研究进展

SAPO-34分子筛的制备方法及其合成因素是影响其晶体形貌、晶粒大小、酸性质和孔道结构等物化性质的重要因素,与分子筛的催化性能密切相关。本文对比分析了常规水热合成法、微波辅助合成法、干胶转化合成法和无溶剂合成法的优缺点,并重点介绍了模板剂、硅铝比、水铝比、硅源铝源和金属改性等制备参数对SAPO-34分子筛物化性质及催化性能的影响;简要总结了其在甲醇制低碳烯烃、氨选择性催化还原NOx和烃类催化裂解制低碳烯烃等催化应用中的进展。本文为设计和制备新型、高效SAPO-34分子筛提供一定的借鉴意义和研究思路。     

金属负载型分子筛催化剂在NH3-SCR反应中水热稳定性的研究进展

NO_x控制是目前大气污染控制领域的重要研究内容，NH₃选择性催化还原技术（NH₃-SCR）是消除NO_x最有效的技术之一，其核心是高性能催化剂的开发。本研究综述了金属负载型分子筛催化剂（Cu基和Fe基分子筛催化剂）的NH₃-SCR活性、水热稳定性以及水热老化失活机制，并对影响催化剂水热稳定性的因素（包括Si/Al比、分子筛拓扑结构、活性金属负载量、粒径和合成方法等）进行了系统阐述，总结了一些有效提高催化剂水热稳定性的改性方法，比如磷改性、第二活性金属改性、碱金属改性和外表面改性等。最后，对进一步提高金属负载型分子筛催化剂在NH₃-SCR反应中的水热稳定性进行了展望。     

二氧化碳合成脂肪族聚碳酸酯

介绍了二氧化碳合成脂肪族聚碳酸酯（APC）的合成工艺、催化剂体系、物理化学性能以及改性,并阐述了共聚物性质和应用前景。     

SAPO-34处理方法对吸附性能的影响

以二乙胺为结构导向剂, 在微波条件下合成了SAPO-34分子筛材料, 并分别在空气和氮气氛下1073 K焙烧. 考察了氮气氛下分子筛表面碳改性后对材料表面及水、甲醇和乙醇吸附性能的影响. 结果表明: 碳改性后SAPO-34比表面、孔容下降, 但孔径趋于均一. 与SAPO-34样品相比, 碳改性后SAPO-34吸水量从0.295 g/g降低到0.180 g/g, 甲醇/乙醇的吸附比从1.42提高到2.81.     

聚环氧琥珀酸水处理剂的合成及其改性研究进展

综述了聚环氧琥珀酸(PESA)水处理剂的合成及改性方法。PESA的合成方法包括一步法和多步法;改性方法包括物理改性和化学改性。对PESA水处理剂未来的发展提出了建议。参考文献30篇。     

改性纳米HZSM-5催化剂上甲苯与甲醇的烷基化反应

以Si,P,Mg复合改性的纳米HZSM-5为催化剂,进行了甲苯与甲醇的烷基化反应;并采用X射线衍射,NH3程序升温脱附,红外和低温N2吸附等方法研究了改性前后催化剂酸性质和孔结构的变化.在小型固定床反应器上,考察了载气量、反应温度和重时空速等反应条件对烷基化反应性能的影响.在2h-1,460℃,甲苯/甲醇比,水/烃比和...     

铝修饰改性对SBA-15分子筛性质及催化剂性能的影响

分别采用调变pH值合成法和后处理嫁接法制备了铝修饰改性的SBA-15分子筛,通过XRD、Al核磁、N₂吸附脱附、NH₃-TPD等方法对改性分子筛的理化性质进行了分析表征,考察了不同的Al修饰改性方法对分子筛性质和加氢裂化催化剂性能的影响。结果表明,调变pH值合成法能够有效地对SBA-15进行Al改性,得到的Al-SBA-15分子筛具有高度有序的六方孔道结构,较好的水热稳定性。Al的引入提高了SBA-15的表面酸性,并使其在加氢裂化反应中表现出较好的中油选择性。     

稀土掺杂改性对Cu/ZnAl水滑石衍生催化剂甲醇水蒸气重整制氢性能的影响

采用原位合成法在γ-Al₂O₃表面合成了锌铝水滑石,再通过顺次浸渍法制备了一系列掺杂稀土改性的M（M=Y、La、Ce、Sm、Gd）/Cu/ZnAl催化材料,并将其应用于甲醇水蒸气重整制氢反应。探讨了稀土掺杂改性对Cu/ZnAl催化剂催化性能的影响,并采用XRD、SEM-EDS、BET、H₂-TPR、XPS和N₂O滴定等手段对催化剂进行了表征。结果表明,催化剂的活性与Cu比表面积和催化剂的还原性质密切相关,Cu比表面积越大,还原温度越低,催化活性越高。稀土Ce、Sm、Gd的引入能改善活性组分Cu的分散度、Cu比表面积以及催化剂的还原性质,进而提高催化剂的催化活性。其中,Ce/Cu/ZnAl催化剂表现出最佳的催化活性,在反应温度为250 ℃时,甲醇转化率达到100%,CO含量为0.39%,相比Cu/ZnAl催化剂,甲醇转化率提高了近40%。     

对氯甲基苯乙烯的聚合及其聚合物性质的研究

<正> 对氯甲基苯乙烯(p-CMS)是一种有工业应用的单体,通过其苄氯基团上的亲核取代反应,可以合成各种功能性单体及功能高分子。虽然其聚合物——聚对氯甲基苯乙烯(P-p-CMS)——可从聚苯乙烯的直接氯甲基化来合成,但通过p-CMS的聚合及共聚可以更准确地控制聚合物的结构和扩大它们在高分子改性中的应用范围.70年代以来,对p-CMS的合成和应用日渐报道,但有关其聚合、单体与聚合物的结构及基本理化性质研     

A DFT study of molecular structures and tautomerizations of 2-benzoylpyridine semicarbazone and picolinaldehyde N-oxide thiosemicarbazone and their complexations with Ni(II), Cu(II), and Zn(II)

The structure optimizations of picolinaldehyde N-oxide thiosemicarbazone (Hpiotsc), 2-benzoylpyridine semicarbazone (H2BzPS), their imino tautomers and their complexes with Ni(II), Cu(II), and Zn(II) were carried out using DFT calculations. The structures of Hpiotsc and H2BzPS ligands, transition states of their tautomerizations were obtained at the B3LYP/6-31+G(d,p) level and their thermodynamic properties were derived from the frequency calculations at the same level of theory. The B3LYP/LANL2DZ-optimized structures of Hpiotsc and H2BzPS complexes with Ni(II), Cu(II), and Zn(II), and the thermodynamic properties of their complexations derived from the B3LYP/LANL2DZ-frequency calculations were obtained. The B3LYP/LANL2DZ-optimized geometrical parameters for the [Ni(Hpiotsc)₂]²⁺, [Cu(Hpiotsc).Cl₂], and [Zn(Hpiotsc).Cl₂] complexes show good agreement with their corresponding X-ray crystallographic data.     

Structure and total synthesis of (-)-myrionidine and (-)-schoberine, antimalarial alkaloids from Myrioneuron nutans

Two new alkaloids, (5S,9S,10R)-myrionidine (1) and (5S,9S,10R,13S)-myrionamide (2), along with the known schoberine (3), were isolated from the leaves of Myrioneuron nutans (Rubiaceae), and their structures were determined from spectral analysis, including mass spectrometry and 2D NMR. The total asymmetric syntheses of (-)-myrionidine (1), (-)-schoberine (3), their enantiomers as well as their 9-epimers derivatives were performed, allowing the determination of their absolute configuration together with that of myrionamide (2). (-)-Myrionidine (1) and its synthetic enantiomer (18) showed a significant antimalarial activity on Plasmodium falciparum.     

蓝布正挥发油化学成分的GC-MS分析

研究贵州产蓝布正（Herba Gei）挥发油的化学成分，采用水蒸气蒸馏法提取蓝布正挥发性成分，用气相色谱－质谱进行分离测定，结合计算机检索技术对分离的化合物进行鉴定，应用色谱峰面积归一化法测定各成分的相对含量；水蒸气蒸馏提取物得率是0．10％，共分离出103种成分，鉴定出40个化学成分，其主要成分为脂肪酸及其甲酯类化合物、萜烯类及其含氧衍生物等，主要有棕榈酸（13．2％）、11，14，17－二十碳三烯酸甲酯（10．4％）、亚油酸（8．6％）、石竹烯氧化物（3．9％）、丁子香酚（3．4％）和反式－植醇（3．2％）等。     

Synthesis of panax acetylenes: chiral syntheses of acetylpanaxydol, PQ-3 and panaxydiol

Acetylpanaxydol (1-Ac), PQ-3 (2) and panaxydiol (3) and their optical isomers were synthesized from L-(+)-diethyl tartrate. The absolute configurations of 1-Ac, 2 and 3 were determined to be 1-Ac (3R,9R,10S), 2 (9R,10S) and 3 (3R,10S), respectively, by comparisons of their optical rotations and the NMR data of their MTPA esters with those of natural products.     

Measurement of nanoparticles by light-scattering techniques

Nanoparticles (NPs), due to their unique physical and chemical properties, especially their minute particle size (?100 nm), find applications in numerous industrial, commercial and consumer products. After their end-user applications, these NPs find their way into the environment and food products. The NPs so discharged need to be quantified accurately to determine their toxicity and exposure levels.At this time, there is a need to develop a unified method for their determination. There are plenty of techniques available in the market that were initially used for colloidal particles (e.g., microscopy, spectroscopy and the recent addition of magnetic resonance), but each of these techniques has a certain degree of uncertainty.Further, sample homogeneity, sample preparation, instrument-operating procedures, and statistical practices are likely to add to the complexity of the problem. In this context, this review attempts to understand the widely-used light-scattering techniques, including their theory, practice and real-world use in determination of NPs in environmental and food applications.     

Etude thermoanalytique de substances psychotherapeutiques. I. Anxiolytiques. Phenprobamate,meprobamate, clobazam et medazepam

The thermoanalytical study of phenprobamate (a), meprobamate I (b), clobazam (c), medazepam I (d) has enabled the existence of polymorphs for (d) to be established, and to confirm that of (b). The thermal stability and decomposition kinetics of commercial forms of drugs have been determined; their temperatures and intervals of fusion are given. Knowing the thermal behaviour of these compounds, their degree of purity: 99.67±0.19% (a), 99.32± 0.04% (b), 99.61±0.07% (c), 99.66±0.14% (d); their enthalpy, 27.58±0.69 (a), 34.23±1.22 (b), 30.38±0.81 (c), 21.48±0.75 kJ mole^-1; and entropy of fusion have been evaluated by differential scanning calorimetry.     

Etude thermoanalytique de quelques steroides. I. Testosterone et derives

The thermoanalytical study of testosterone (a), phenylpropionate (b), and decanoate (c) of testosterone has enabled the existence of polymorphs for (b) and (c) to be shown and to confirm that of (a). The thermal stability, decomposition kinetics of commercial forms of testosterone (I), phenylpropionate (I) and decanoate (II) of testosterone have been determined; their temperatures and intervals of fusion are given. Knowing the thermal behaviour of these drugs, their degree of purity: 99.69 ± 0.08% (a), 99.78 ± 0.07% (b), 99.53 ± 0.08% (c), their enthalpy 6151 ± 255 (a), 6123 ± 147 (b), 8598 ± 164 (c) cal mole^?1, and entropy have been evaluated by differential scanning calorimetry.     

共轭型聚合物三阶非线性光学材料的研究进展

综述了近１０年共轭型聚合物三阶非线性光学材料取得的新进展。主要包括聚二乙炔及其衍生物、聚乙炔及其衍生物、聚噻吩及其衍生物、聚苯乙炔及其衍生物、聚苯腈及其衍生物以及聚苯胺类等。     

Heterocyclo-Substituted Sulfa Drugs: Part XII. Mercapto-S-Azo-Benzothiazol Dyes and Their Metal Complexes

New azo sulfadrugs of 2-mercapto-S-azo ( p '-heterocyclo-substituted benzene-sulfonyl) benzothiazole derivatives (L 1 and L 2 ) were synthesized by coupling of p '-heterocyclo-substituted-benzene-sulphonyl diazonium salts with 2-mercapto-benzothiazole in acid medium. The corresponding iron(III), cobalt(II), nickel(II), copper(II), and mercury(II) chelates were prepared in a 1:1 metal to ligand molar ratio. The ligands and their chelates were characterized on the basis of microanalysis, UV, IR, and H 1 -NMR spectrometry. Thermal decomposition of the complexes was studied in static air. On the basis of the thermogravimetric curves some decomposition steps could be correlated with the proper decomposition products. The photochemical behavior of the ligands and their complexes were investigated. The photosensitivity shown by the complexes was attributed to the photoreactivity of their free ligands. The ligands and their chelates were screened in vitro for their antimicrobial activities (antibacterial and antifungal). The complexes induce a remarkable increase in the antimicrobial activity compared to the corresponding ligands.