咪唑类离子液体中合成β-烯胺酮的研究

本文通过修饰阴阳离子合成了一系列咪唑型离子液体,以β-烯胺酮的合成为反应探针,考察离子液体结构和活性之间的关系。结果表明:阴阳离子对离子液体的活性都有显著的影响。阴离子为BF4-时,阳离子活性顺序为[Hmim]+[bmim]+,[emim]+[bmmim]+,其中[Hmim]BF4作反应介质,反应时间为10min,产率可达96%。当阳离子为[Hmim]+时,阴离子BF4-,Tsa-,Br-和NO3-活性均较高,产率达到93%以上,但阴离子HSO4-显著降低离子液体的活性,反应30min,产物收率仅有60%;阳离子为[bmim]+时,[bmim]Br[bmim]PF6[bmim]BF4,产率达到85%以上;而阴离子为HSO4-和H2PO4-时,离子液体活性变差,收率低于70%。离子液体[Hmim]BF4重复使用5次,β-烯胺酮产率基本不变,反应10min后,仍达89%。     

Brφnsted酸性离子液体催化合成阿司匹林

用Brφnsted酸性离子液体[Hmim]BF4、[bmim]HSO4和[bmim]H2PO4代替浓H2SO4为催化剂催化乙酸酐对水杨酸的乙酰化,合成阿司匹林。考察了反应温度、反应时间、催化剂用量、酐/醇摩尔比对水杨酸酰化反应产率的影响和离子液体的重复使用性能。选择了最佳反应条件,以[bmim]H2PO4作为催化剂,催化剂用量为0.28g(1.18×10-3mol),水杨酸2.762g(0.02mol),乙酸酐4.083g(0.04mol),n(酐)∶n(醇)=2∶1,反应时间30min,反应温度70℃,产率最高达63.43%,并且[bmim]H2PO4溶于水后通过过滤和旋蒸脱水,重复使用3次,产率无明显变化。     

Brønsted酸性离子液体催化合成阿司匹林

用Bronsted酸性离子液体[Hmim]BF4、[bmim]HSO4和[bmim]H2PO4代替浓H2SO4为催化剂催化乙酸酐对水杨酸的乙酰化,合成阿司匹林.考察了反应温度、反应时间、催化剂用量、酐/醇摩尔比对水杨酸酰化反应产率的影响和离子液体的重复使用性能.选择了最佳反应条件,以[bmim]H2PO4作为催化剂,催化剂用量为0.28 g(1.18×10-3mol),水杨酸2.762 g(0.02 mol),乙酸酐4.083 g(0.04 mol),n(酐)n(醇)=21,反应时间30 min,反应温度70℃,产率最高达63.43%,并且[bmim]H2PO4溶于水后通过过滤和旋蒸脱水,重复使用3次,产率无明显变化.     

Br(o)nsted酸性离子液体催化合成阿司匹林

用Brcnsted酸性离子液体[Hmim]BF4、[bmim]HSO4和[bmim]H2PO4代替浓H2SO4为催化剂催化乙酸酐对水杨酸的乙酰化，合成阿司匹林。考察了反应温度、反应时间、催化剂用量、酐／醇摩尔比对水杨酸酰化反应产率的影响和离子液体的重复使用性能。选择了最佳反应条件，以[bmim]H2PO4作为催化剂，催化剂用量为0．28g（1．18×10^-3mol），水杨酸2．762g（0．02mol），乙酸酐4．083g（0．04mol），n（酐）：n（醇）=2：1，反应时间30min，反应温度70℃，产率最高达63．43％，并且[bmim]H2PO4溶于水后通过过滤和旋蒸脱水，重复使用3次，产率无明显变化。     

离子液体中一步合成14-芳基-1,6,7,14-四氢二苯并[a, i]吖啶-1,6-二酮衍生物

室温条件下在离子液体[bmim]BF4中合成了14-芳基-1,6,7,14-四氢二苯并[a, i]吖啶-1,6-二酮类衍生物,该方法具有产率高,反应介质可回收使用,反应底物范围广,反应时间短,操作简单等优点。     

离子液体[bmim]Cl-CrCl2促进的Reformatsky反应研究

用无水氯化铬(CrCl2)和氯化1-丁基-3-甲基咪唑([bmim]Cl)制备了离子液体[bmim]Cl-CrCl2, 考察了CrCl2与[bmim]Cl物质的量比以及离子液体与底物物质的量比对Reformatsky反应的影响, 研究了[bmim]Cl-CrCl2促进不同底物发生的Reformatsky反应. 结果表明, 离子液体[bmim]Cl-CrCl2不仅能促进醛、酮与α-溴代酸酯的反应, 以极好的产率得到β-羟基酸酯; 而且能较好地诱导α-溴代苯乙酮与醛、酮的反应, 以较高的产率得到β-羟基酮. 该离子液体经处理后可以重复使用, 是一种Reformatsky反应的绿色化学方法.     

离子液体中β-葡萄糖苷酶生物催化合成红景天甙

比较了聚乙二醇修饰的β-葡萄糖苷酶在三种离子液体([bmim]PF6,[bmim]BF4,[bmim]Tf2N)及两种常用有机溶剂(1,4-二氧六环、正己烷)中的催化性能,确定了适宜的反应介质;考察了底物浓度、温度、体系含水量和反应时间等因素对β-葡萄糖苷酶催化合成红景天甙反应的影响.结果表明,在最佳反应介质[bmim...     

离子液体中13-芳基-5,7,12,14-四氢二苯并[b, i]氧杂蒽5,7,12,14(13H)-四酮衍生物的绿色高效合成

在离子液体[bmim+][BF4-]中高产率的合成了一系列13-芳基-5,7,12,14-四氢二苯并[b, i]氧杂蒽-5,7,12,14(13H)-四酮类化合物。该反应操作步骤简单,离子液体易于与产物分离,并且离子液体可以循环使用。     

反相高效液相色谱法测定离子液体及其中的高沸点有机物

建立了反相键合相液相色谱分析离子液体咪唑类离子液体[bmim]PF6[、bmim]BF4、吡啶类离子液体[bupy]BF4的纯度及其中高沸点有机物的方法.以缓冲溶液控制流动相pH值,显著改善了峰形.保留时间定性,外标法定量.     

Ru-[bmim]BF4 的制备及催化苯选择加氢反应性能

以离子液体1-丁基-3-甲基咪唑四氟硼酸盐([bmim]BF4)-水混合溶剂为介质,采用化学还原法制备了Ru-[bmim]BF4催化剂,并利用紫外-可见光谱、红外光谱、透射电镜、X射线衍射和X射线光电子能谱对催化剂进行了表征.结果表明,Ru在[bmim]BF4中分散较好,粒径~2nm,且离子液体中咪唑阳离子与部分Ru形成了金属卡宾配合物.利用苯选择加氢反应对该催化剂性能进行了评价,发现Ru-卡宾配合物存在时,催化剂活性较低,但环己烯选择性较高.在本文反应条件下,苯转化率为12.2%,环己烯选择性为40.5%.重复使用该催化剂时,由于Ru-卡宾配合物在反应中转变为Ru0,其催化活性增加,但环己烯选择性下降.继续多次使用该催化剂,其性能基本保持稳定.     

二醋酸纤维素-离子液体膜固定肌红蛋白制备过氧化氢传感器

将二醋酸纤维素(CDA)-(1-丁基-3-甲基咪唑四氟硼酸盐离子液体)([bmim]BF4)-肌红蛋白(Mb)的复合物修饰在玻碳电极(GCE)表面,制备了一种新型Mb修饰电极(CDA-[bmim]BF4-Mb/GCE).光谱分析表明:固定在CDA- [bmim]BF4-Mb膜中的肌红蛋白保持了其天然构象和生物活性.离子...     

高活性离子液体-铑膦络合物体系催化1-己烯氢甲酰化反应

 The hydroformylation of 1-hexene catalyzed by rhodium-TPPTS complexes in the ionic liquid [bmim]BF4 was studied. The activity and selectivity of the rhodium-TPPTS complexes in [bmim]BF4 were much higher than those reported in other ionic liquids. The TOF of 1-hexene and selectivity for aldehyde were 1508 h-1 and 92%, respectively, under the optimum conditions. The high activity of the catalyst is ascribed to the absence of halide ions as well as the much higher solubility of hydrogen and rhodium-TPPTS complexes in [bmim]BF4 than in [bmim]PF6.     

Conductive polymer as a controlled microenvironment for the potentiometric high-throughput evaluation of ionic liquid cell toxicity

This paper presents both biological and potentiometric evaluations of the cell toxicity of a widely used ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim]BF(4)), to Chinese hamster lung fibroblast cells (V79 cell line). The innovative potentiometric study takes advantage of the unique properties of conductive polymer polypyrrole (PPY) for the potentiometric evaluation of cell toxicity of [bmim]BF(4) to the V79 cells in a real-time, noninvasive and high-throughput manner. The conductive polymer PPY provides a controlled microenvironment that allows the quantitative release of the anions of the ionic liquids into the cells being monitored in real time and noninvasively. Parallel biological assay results showed that V79 cells exposed to [bmim]BF(4) usually grew in clusters, and that many small vacuoles could be seen in the cytoplasm. At the 24th hour after the V79 cells had been exposed to the ionic liquid (IL), the half inhibition concentration (EC(50)) of [bmim]BF(4) was around 5 mM. From a cell cycle study performed using a FACScan flow cytometer, it was found that the V79 cells could be partially locked to the G(1) phase by [bmim]BF(4), which extended the doubling time for cell growth. Comparing with the EC(50) values of cadmium chloride and mercury chloride, [bmim]BF(4) is not very toxic, but it may have a long-term toxic effect on mammalian cells. Compared to traditional biological in vitro assays, the use of a conductive polymer substrate in combination with a potentiometric sensor array is much more sensitive, faster, and enables a simpler evaluation of chemical cell toxicity. Additionally, it simplifies the study of the reversibility of cell toxicity, i.e., cell recovery, because there is no need to refresh the culture medium since a finite amount of chemicals can be doped and released. We found that the cytotoxicity of [bmim]BF(4) at a concentration of less than 6 mM was reversible for the V79 cell line, because cell morphology and proliferation rate returned to normal after the removal of the IL from the culture medium. This finding suggests that the IL [bmim]BF(4) could be used as a tool to control mammalian cell proliferation rate.     

离子液体介质中一锅法合成2-氨基-4-苯基-6-(苯基硫基)-3,5-二氰基吡啶衍生物

考察了各种不同介质中,芳醛、丙二腈和苯硫酚为原料的一锅反应,发现在离子液体1-正丁基-3-甲基咪唑四氟硼酸盐([bmim]BF4)介质中,反应能够在较短时间内高产率地生成2-氨基-4-苯基-6-(苯基硫基)-3,5-二氰基吡啶衍生物,且没有1,4-二氢吡啶副产物的生成.该方法具有反应条件温和、产率高、选择性好和环境友好等优点,且离子液体容易回收,可循环使用.     

添加中低浓度离子液体[bmim][BF4]对吐温-20临界胶束浓度和胶束结构的影响

添加离子液体会对表面活性剂在水溶液中的聚集行为产生重要影响。本文研究了吐温-20在中低浓度离子液体四氟硼酸1-丁基-3-甲基咪唑鎓([bmim][BF_4])中的胶束化行为。随着[bmim][BF_4]浓度(cIL)从0增加到0.2mol·L~(-1),吐温-20的临界胶束浓度逐渐增大。相比cIL0.05mol·L~(-1),在cIL0.05mol·L~(-1)时加入[bmim][BF_4]使吐温-20临界胶束浓度增大得更加显著。吐温-20胶束聚集数随着离子液体浓度的增加而逐渐减小,这一结果也说明加入离子液体会对吐温-20胶束的生成有抑制作用。吐温-20胶束化热力学研究表明,吐温-20在不同浓度离子液体中的胶束化是熵、焓共同驱动,并具有熵-焓补偿性。随着离子液体浓度的增加,吐温-20胶束平均粒径和胶束微粘性均表现出先增大后减小的变化,在cIL=0.05mol·L~(-1)时达到最大值。     

Concentration-dependent dual behavior of hydrophilic ionic liquid in changing properties of aqueous sodium dodecyl sulfate

Modifying physicochemical properties of aqueous surfactant solutions in favorable fashion by addition of environmentally benign room-temperature ionic liquids (ILs) has enormous future potential. Due to its unusual properties, an IL may demonstrate a unique role in altering the properties of aqueous surfactant solutions. Changes in the properties of aqueous sodium dodecyl sulfate (SDS), an anionic surfactant, upon addition of a common and popular "hydrophilic" ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF4] are presented. Addition of low concentrations of [bmim][BF4] (i.e., 相似文献   

Cu(I)(bpp)]BF4: the first extended coordination network prepared solvothermally in an ionic liquid solvent

Use of an ionic liquid [bmim][BF4] (bmim = 1-butyl-3-methylimidazolium) as solvent has resulted in the first extended coordination structure, the two-dimensional network [Cu(bpp)]BF4 [bpp = 1,3-bis(4-pyridyl)propane], produced via a solvothermal route.     

Thermodynamic modeling of the phase behavior of binary systems of ionic liquids and carbon dioxide with the group contribution equation of state

The group contribution equation of state (GC-EOS) was applied to predict the phase behavior of binary systems of ionic liquids of the homologous families 1-alkyl-3-methylimidazolium hexafluorophosphate and tetrafluoroborate with CO2. Pure group parameters for the new ionic liquid functional groups [-mim][PF6] and [-mim][BF4] and interaction parameters between these groups and the paraffin (CH3, CH2) and CO2 groups were estimated. The GC-EOS extended with the new parameters was applied to predict high-pressure phase equilibria in binary mixtures of the ionic liquids [emim][PF6], [bmim][PF6], [hmim][PF6], [bmim][BF4], [hmim][BF4], and [omim][BF4] with CO2. The agreement between experimental and predicted bubble point data for the ionic liquids was excellent for pressures up to 20 MPa, and even for pressures up to about 100 MPa, the agreement was good. The results show the capability of the GC-EOS to describe phase equilibria of systems consisting of ionic liquids.     

Effects of water and methanol on the molecular organization of 1-butyl-3-methylimidazolium tetrafluoroborate as functions of pressure and concentration

The structural organization in mixtures of 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF(4)])/water or methanol was studied by infrared spectroscopy. No drastic change in the concentration dependence of the alkyl C-H band frequency was observed at high concentration of the ionic liquid. This behavior indicates a clustering of the ionic liquid in alkyl regions. Nevertheless, the presence of methanol significantly perturbs the ionic liquid-ionic liquid associations in the imidazolium region. On the basis of the responses to change in pressure and concentration, two different types of O-H species, i.e., free O-H and bonded O-H, were observed in the O-H stretching region. For [bmim][BF(4)]/water mixtures, the compression leads to loss of the free O-H band intensity. It is likely that free O-H is switched to bonded O-H as high pressures are applied. For [bmim][BF(4)]/methanol mixtures, the free O-H is still stable under high pressures.