立构复合PL(D) LA-TMC无规共聚物的制备、结构与性能

以辛酸亚锡为催化剂,通过开环聚合法制备了聚左旋乳酸-三亚甲基碳酸酯(PLLA-TMC)和聚右旋乳酸-三亚甲基碳酸酯(PDLA-TMC)无规共聚物.利用共聚物中PLLA/PDLA链段形成立构复合体,通过溶液浇注法制备了PLLA-TMC/PDLA-TMC立构复合聚乳酸材料(sc-PLA-TMC).研究结果表明,聚合物链中的柔性TMC单元可以增强L(D)LA链段的运动能力,有助于不同旋光性的LA链段形成立构复合晶体,但也使得L(D)LA链段的规整度和序列长度降低.即随着共聚物链段中柔性TMC单元摩尔含量的增加,sc-PLA-TMC中同质结晶能力降低.当TMC含量≥5%时,仅生成熔点200℃的PLLA/PDLA立构复合结晶,表明sc-PLA-TMC的耐热性有所提高.蛋白酶K降解实验表明,PL(D)LA-TMC共聚物的降解速率不但比PLLA高,而且可通过共聚物中TMC含量进行调控.     

三亚甲基环碳酸酯及2,2-二甲基三亚甲基环碳酸酯开环均聚合*

生物降解聚合物聚三亚甲基环碳酸酯（PTMC）及聚2,2-二甲基三亚甲基环碳酸酯（PDTC）在药物控释载体及其它生物医学技术领域有着良好的应用前景。与脂肪族聚酯不同,PTMC、PDTC降解时,不会产生有害的酸性化合物。PTMC、PDTC主要由三亚甲基环碳酸酯（TMC）及2,2-二甲基三亚甲基环碳酸酯（DTC）开环均聚合制备。本文总结了催化TMC、DTC开环均聚合的不同催化剂及其聚合机理,综述了近年来国内外在TMC、DTC均聚合催化剂开发上的研究进展,并对生物相容性催化剂如稀土催化剂、Ca、Mg、Zn、Fe催化剂以及酶催化剂催化TMC、DTC开环聚合的优缺点进行了比较。     

三(2,6-二叔丁基-4-甲基-苯氧基)镧催化ε-己内酯低温聚合特征及与环碳酸酯嵌段共聚

摘要用三(2,6-二叔丁基-4-甲基-苯氧基)镧[La(OAr)₃]在-15 ℃引发ε-己内酯(CL)的开环聚合, 发现聚合体系具有活性聚合特征. 在第二步聚合过程中继续补加第二种单体三亚甲基环碳酸酯(TMC)或二甲基三亚甲基环碳酸酯(DTC), 可得到CL与环碳酸酯的嵌段共聚物.     

苄醇存在下脂肪叔胺催化内酯开环聚合

为研究脂肪叔胺结构对内酯开环聚合规律的影响,以三乙胺( TEA)、N,N,N′,N′-四甲基乙二胺(TMEDA)、N,N,N′,N″,N″-五甲基二亚乙基三胺(PM DTA)3种不同结构的叔胺催化碳酸三亚甲基酯(TMC)和左旋丙交酯( L-LA)开环聚合.结果显示,在55℃的THF溶液中,以苄醇为引发剂,3种叔胺均能催...     

不同旋光度PLGA的制备及其结晶性能研究

以消旋丙交酯、左旋丙交酯和乙交酯为原料,以辛酸亚锡为引发剂,在高真空条件下本体熔融开环聚合,制得一系列不同旋光度的丙交酯乙交酯共聚物(PLGA),其结构经1H NMR, IR, XRD和DSC表征.并采用DSC研究了PLGA的熔体结晶行为,结果表明其结晶性能随其旋光度的减少而显著降低,甚至不结晶.     

PNIPAM-b-聚碳酸酯温敏胶束的制备及用作药物控制释放载体的研究

以多孔硅球固定化猪胰脂肪酶(IPPL)为催化剂,温敏性HO-PNIPAM为大分子引发剂,5-甲基-5-烯丙氧羰基-三亚甲基碳酸酯(MAC)和5,5-二甲基三亚甲基碳酸酯(DTC)为共聚单体,通过开环聚合合成了不同结构比例的两亲性嵌段型共聚物P(MAC-co-DTC) -b-PNIPAM.该嵌段型共聚物在水中可自组装形成...     

PLLA-TMC微球增强磷酸钙骨水泥的制备与性能研究

以左旋丙交酯（L-LA）和三亚甲基碳酸酯（TMC）为原料,辛酸亚锡为催化剂,采用本体聚合法制备了不同单体配比的二元无规共聚物（PLTMC64, PLTMC73和PLTMC82）,其结构和性质经¹H NMR, FT-IR, GPC和DCS等表征。采用水包油法将3种二元PLLA-TMC共聚物制成平均直径约50 μm的微球,以5 wt%含量加入到磷酸钙骨水泥中进行固化时间与力学性能测试。结果表明：添加PLTMC73微球为增强相时,骨水泥压缩强度增高到22 MPa左右,且压缩模量能达到1.5 GPa。 SEM照片显示,骨水泥与微球之间有较好的亲和性。      

聚右旋丙交酯和聚左旋丙交酯乙交酯的制备及其共混物的结晶行为

以辛酸亚锡为催化剂,十八醇为引发剂,分别以右旋丙交酯和左旋丙交酯与乙交酯为原料,在真空条件下经本体熔融开环聚合制备了系列右旋丙交酯聚合物(E)和左旋丙交酯乙交酯共聚物(F),其结构经1H NMR和IR表征。利用DSC研究了E和F共混物(M)的结晶性能,结果表明,E和F能形成具有较高熔点的立构复合物(SC),其形成能力随E分子量的增加而降低,且SC的含量在E和F共混比为49∶51附近出现极大值。     

增塑剂对可吸收缝合线后处理工艺条件和降解性能的影响

分别在对二氧环己酮均聚物和对二氧环己酮-乙交酯共聚物中加入增塑剂进行纺丝,制得聚对二氧环己酮单丝缝合线(PDS)和对二氧环己酮-乙交酯共聚物单丝缝合线(PDG).用DSC方法研究了增塑剂含量对PDS缝合线热性能的影响和不同热定型条件的PDG缝合线的热性能,测试了热定型温度对PDG缝合线初始强度、模量及柔量的影响,考察了增塑剂含量对两种缝合线的生物降解性能和力学降解性能影响.研究结果表明,PDS缝合线的玻璃化转变温度Tg、结晶温度Tc以及熔融温度Tm均随着增塑剂含量的增加而降低,但其结晶能力增加.随着热定型温度的增加,PDG缝合线的初始打结强度、熔融热均提高,熔融温度Tm基本保持不变.两种缝合线的强度保留率随着增塑剂含量的增加均先增加后减小,而重量保留率随着增塑剂含量增加始终减小.     

聚(对氧环己酮-三亚甲基碳酸酯)静电纺膜的制备及其生物学与降解性能研究

通过静电纺丝技术,将二元共聚物聚(对氧环己酮-三亚甲基碳酸酯)(PDT)制成了膜材料,采用扫描电镜(SEM)观察了静电纺膜的形貌,当共聚物中TMC组分含量越高时,纤维丝之间黏结越严重.采用静态接触角仪测定了静电纺膜的接触角,表征了共聚物的亲疏水性,PDT的亲水性介于PPDO与PTMC均聚物静电纺膜之间.对PDT共聚物静电纺膜进行了L929大鼠成纤维细胞培养实验,MTT和荧光染色结果说明PDT膜的细胞相容性良好.通过水解及酶解实验考察了材料的降解过程,PDT静电纺膜在脂肪酶存在下降解速率加快,材料的失重率、分子量损失、材料形貌破坏程度等均高于水解样品,这说明脂肪酶对含有TMC组分的聚合物的降解有促进作用.同时,降解过程中PBS溶液的p H值变化说明TMC组分的加入,减缓了降解过程中酸性物质的产生.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.