铱-芴主链型共聚物的合成与光致发光性能

合成以2-(4-溴苯基)苯并咪唑为环金属配体、乙酰丙酮为辅助配体的铱配合物客体单元,并通过Suzuki缩聚方法将客体引入聚芴(PFO)主体中,合成了主链型共聚物。通过元素分析、红外光谱、1 H-NMR等分析手段对产物进行了结构表征,通过紫外吸收光谱、稳态和瞬态荧光光谱对铱配合物、共聚物的光物理性能进行了研究。结果表明:铱配合物最大发射峰位于505nm和535nm,为绿光发射;共聚物同时呈现蓝光主体PFO和绿光客体铱配合物的发射,且随铱配合物含量提高,绿光强度明显增强,显示了主客体能量的部分转移,通过调节共聚物中铱配合物单元的含量,使共聚物的发光颜色从蓝光向绿光转移;当铱配合物的物质的量分数为2%时,蓝色荧光强度大于绿色磷光,共聚物色坐标刚好处于蓝绿交界处,当铱配合物物质的量分数大于2%时,共聚物呈现绿色发光;与铱配合物的荧光量子效率(2.7%)相比,共聚物的荧光量子效率均有显著增加;共聚物热稳定性良好。     

2-(2-苯并咪唑)-6-甲基吡啶锌配合物的合成及发光性质

合成了2-(2-苯并咪唑)-6-甲基吡啶及其锌配合物,通过元素分析、摩尔电导率、红外光谱和紫外光谱对产物进行了表征,并运用荧光光谱对配合物的发光性质进行了研究。结果表明,锌配合物在DMF溶液中的荧光最大发射波长为428nm,在固态下的荧光最大发射波长为448nm,均属于蓝光发射,具有作为蓝色发光材料的潜能。     

以氧化偶联聚合法制备主链含香豆素的颜色可调发光共聚物

用氧化偶联共聚合方法合成了几种主链上含香豆素或香豆素1的共聚物。用红外光谱和核磁共振氢谱表征了共聚物的结构。共聚物的结构均为非晶态,并且呈现良好的热稳定性,用紫外-可见光谱表征了共聚物的吸收特征。共聚物的荧光光谱表明,通过含香豆素的共聚物中两单体的不同组成可呈现蓝光、绿光、黄光和红光发射,发光波长几乎覆盖了整个可见光区,说明含有香豆素的共聚物可以成为颜色可调的发光聚合物。     

芳氨基螺芴类蓝色发光材料合成及荧光性能的研究

设计合成了一种新型二苯胺螺芴化合物2,7-双二苯胺-螺环[芴-7,9’-苯并芴](DDsF),通过了1HNMR,MS,IR图谱测试和元素分析,每步反应产率均在70％以上；利用紫外可见吸收光谱、荧光光谱研究了其发光性能.结果表明,在固体状态下,其荧光发射峰红移40 nm左右.然而溶液荧光强度及荧光量子产率都随着溶剂极性的变化有着明显差异；通过循环伏安法测得其氧化峰电位为0.77 V,计算出DDSF的HOMO能级为-5.10 eV,LUMO能级为-2.95 eV.     

氧化偶联共聚合制备主链含β-萘烷基醚的红色发光聚合物

用氧化偶联聚合法合成了主链上含β-萘烷基醚和吡啶、二烷基芴、二苯乙烯和均四甲苯的聚合物.用FT-IR和1H NMR表征了聚合物的结构.广角X射线衍射表明共聚物的结构都是非晶态的.用UV-V is表征了共聚物的吸收特征.聚合物的荧光光谱表明,含有β-萘烷基醚和吡啶的聚合物在溶液中表现为红光发射材料.含有β-萘甲醚和二苯乙烯的共聚物为黄橙光发射,通过改变单体含量也可实现红光发射.含有β-萘甲醚和二烷基芴的聚合物固体有望成为白光发射材料.     

新型可溶性酞菁的合成和光致发光及电致发光性质

以3(4)-硝基邻苯二腈和对甲氧基苯酚为原料, 经过两步反应合成了α(β)-四(4-甲氧基苯氧基)酞菁锌, 通过谱学方法和元素分析表征了其结构. 比较研究其溶液和旋涂膜的紫外可见光谱、光致发光光谱和固体薄片的光致发光光谱. 并以其旋涂膜为发光层制备了电致发光器件, 研究其电致发光性质. 结果表明, 固态酞菁材料与其溶液的荧光发射波长相比均向长波方向移动了145 nm以上, 而且都有不同程度的宽展. 在固态下β-位取代酞菁荧光发射波长红移的程度比α-位取代酞菁大. 电致发光光谱的发射波长和其旋涂膜的光致发光光谱的发射波长基本一致, 大约在856和862 nm左右. 在固态下酞菁分子排列紧密, 分子间相互作用增强导致了荧光发射波长的巨大红移.     

新的β-二酮及其Eu(Ⅲ)配合物的合成表征及荧光性能研究

合成了一种新的β-二酮,2-吡啶甲酰苯甲酰甲烷(HPBM),以元素分析和1H NMR谱确定了其组成,核磁和红外分析结果表明HPBM主要以烯醇式存在.以HPBM作配体采用溶液析出法合成了Eu(Ⅲ)的二元配合物,并以邻菲罗啉(Phen)、三苯基氧膦(TPPO)作为第二配体合成了两种新的三元配合物,用元素分析、红外光谱、紫外可见吸收光谱和荧光光谱进行了表征.荧光光谱研究表明:配体与EuM3+之间存在着有效的能量传递,且显示Phen和TPPO对配合物有较强的敏化作用.发射光谱表明三种配合物均显示Eu3+离子的特征发射光谱,发射谱线很窄,主发射峰为Eu3+的5D0-7F2发射.三种配合物中Eu(PBM)3(TPPO)(H2O)2发光强度最高,是具有一定应用价值的红色高亮发光材料.     

新的β-二酮及其Eu(Ⅲ)三元配合物的合成与发光研究

合成了一种新的β-二酮,4-甲氧基联苯甲酰三氟丙酮(1-(4'-meothoxybiphenyl-4yl-)-4,4,4,-trifluoro-butane-1,3-dione,MBPTFA),以元素分析和1H-NMR谱确定了其组成;进而以MBPTFA作第一配体和邻菲罗啉(1,10-phenanthroline,Phen)为第二配体,与EuGl3反应,合成了一种三元配合,Eu(MBPTFA)3Phen.用元素分析、红外、紫外-可见吸收光谱和荧光光谱进行了表征.荧光分析结果表明:配体本身是一种良好的蓝色发光材料;配合物中的有机配体能够有效地的把吸收的能量传递给中心Eu3 离子,强烈敏化Eu3 发光,且发射谱线很窄,主发射峰为Eu3 的5Do-7F2发射.这对寻找新型稀土配合物发光材料和制备有机电郅发光器件具有一定的价值.     

双(1,2-二苯基环戊二烯基)二氯化锆化合物发光光谱行为及取代基效应

以干燥的正己烷为溶剂, 在N2气保护下, 研究了金属有机化合物双(1,2-二苯基环戊二烯基)二氯化锆(2)、 双(4-甲基-1,2-二苯基环戊二烯基)二氯化锆(3)和双(1,2,4\|三苯基环戊二烯基)二氯化锆(4)的发光光谱行为. 研究结果表明, 该系列化合物具有良好的发光性能, 且荧光光谱的发射波长可通过改变环戊二烯基4位上的取代基R进行调节. 发射光波长大小顺序为Ph>CH3>H.     

丙烯酸接枝邻苯二酚衍生物的二次聚合

合成了2种聚合前驱体邻苯二丙烯酸酯(o-PDA)和2-甲氧基苯丙烯酸酯(2-MOPA), 分别通过与丙烯酸(AA)自由基共聚得到邻苯二丙烯酸酯-丙烯酸共聚物(O1)和2-甲氧基苯丙烯酸酯-丙烯酸共聚物(O2). 产物邻苯二酚(o-DHB)-O1(质量比1∶1)和1-羟基-2-甲氧基苯(HMOB)-O2(质量比1∶1)分别在乙腈/二氯甲烷-三氟化硼乙醚体系中直接阳极氧化聚合获得交联网状共聚物P1和P2. P1和P2均可溶于DMSO, 而难溶于ACN, DCM和THF等有机溶剂. 通过UV-Vis, FTIR和 ¹H NMR对交联共聚物膜的结构进行了表征. AA的引入不仅可以增加链的柔韧性, 而且提高了共聚物的力学性能. 而o-DHB/ HMOB的引入极大地减弱了单体的聚合位阻, 实现了单体的二次聚合, 同时也增强了单体及聚合物的电化学活性. 荧光光谱显示, 得到的2种交联共聚物膜分别在415和487 nm处有较强的发射峰, 表明共聚物仍具有良好的蓝色发光性能, 且聚丙烯酸结构的引入并没有对聚邻苯二酚(Po-DHB)和聚(1-羟基-2-甲氧基苯)(PHMOB)产生较大的荧光猝灭作用. 热重分析曲线(TGA)表明2种交联共聚物膜均具有较高的热稳定性.     

An Investigation of the Structure of Copolymers of lsobutylene and Diene Prepared by Initiation with VCI4 in the Dark and with Visible Light

¹H-NMR spectra of copolymers of isobutylene and 1,3-butadiene, isoprene, and 2,3-dimethyl-1,3-butadiene were investigated in connection with the elucidation of the formation of soluble and insoluble copolymers. For copolymers soluble in heptane, benzene, and CCI₄ it was found that the incorporation of diene into the polymer chain proceeds by 1,4-addition in the case of copolymerizations conducted both in the dark and with visible light using VC1₄ as initiator. The formation of a soluble and an insoluble copolymer is attributed to a different type of initiation, either with radical-cations of isobutylene, if soluble copolymers are formed, or with radical-cations of diene, if the arising copolymers are insoluble.     

Application of New Modified Poly(ethylene Oxide)-Block-Poly(propylene oxide)-Block-Poly(ethylene oxide) Copolymers as Demulsifier for Petroleum Crude Oil Emulsion

Water soluble nonionic amphiphilic block copolymers based on hydrophilic poly(ethylene glycol) (PEG) and hydrophobic poly(propylene glycol) (PPG) were prepared. Poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) copolymers, PEG-PPG-PEG, were prepared in the normal condition. The chemical composition and molecular weights of the prepared copolymers were determined from ¹H NMR and GPC techniques. The surface properties of the prepared surfactants were determined by measuring the surface tension at different temperatures. The prepared nonionic surfactants were evaluated as demulsifiers for water in crude-oil emulsions that were pronounced at different ratios of crude oil: water at 318 K and 333 K. The experimental results showed that the dehydration rate of the prepared demulsifiers reached 100% based on demulsifier chemical compositions and concentrations.     

Oligomers Derived from 2-Oxazolines

This paper describes the synthesis and properties of oligomer chains derived from 2-oxazolines. First, poly(styrene-g-N-acetyl-ethylenimine) was prepared, and its hydrolysis gave poly(styrene-g-ethylenimine) which showed good chelating properties. Secondly, ABA type triblock copolymers were prepared in which an N-acylethylenimine chain is used as A block and ethylene oxide chain is employed as B block. These triblock copolymers showed good compatibility with Nylon 6, which were shown to posecess effective anti-electrostatic properties for Nylon 6. Thirdly, AB type block copolymers from 2-oxazolines have been prepared by using living polymerization technique. These block copolymers are soluble in water and showed good surfactant nature as reflected by surface tension (γ), when A block is consisted from N-acetyl- or N-propionylethylenimine chain (hydro-philic) and B block is made of N-tridecanoyl or N-aroylethylenimine chain (lipophilic). Finally, graft copolymers of cellulose diacetate having N-acetylethylenimine chain were prepared. It has been found by using a rheovibron that these graft copolymers are compatible with poly(vinyl chloride).     

Studies of the antenna effect in polymer molecules 25. Photozymes with rose bengal chromophores

Several copolymers of poly(sodium styrenesulfonate-styrene-vinylbenzylchloride) and poly(sodium styrenesulfonate-2-vinylnaphthalene- vinylbenzylchloride) containing various amounts of rose bengal chromophores attached to the polymer chain were synthesized. The copolymers are soluble in water and can solubilize large hydrophobic compounds. They are efficient genarators of singlet oxygen, and act as photosensitizers in the oxidation of singlet oxygen acceptors which are dissolved in the water phase and solubilized in the hydrophobic polymeric microdomains.     

Charges of soluble amphiphiles and particles: random and diblock copolymerizations of MAA/AAm,MAA/St,and MAA/4VP in ethanol

Random and reversible addition-fragmentation chain transfer (RAFT) copolymerizations of methacrylic acid (MAA)/acrylamide (AAm), MAA/styrene (St), and MAA/4-vinyl pyridine (4VP) were carried out in ethanol. (CPDB)-terminated PMAA (PMAA-CPDB) and 2,2′-azobis(2,4-diemthylvaleronitrile) (V-65) was used as the macromolecular chain transfer agent (CTA) and initiator, respectively. Electric conductivity of copolymerization systems was traced throughout the polymerizations, and charges of soluble copolymer and particles were detected. As a result, a considerable increase of conductivity was observed in all of the RAFT polymerization systems, whereas the variation of conductivity in the random copolymerization systems was insignificant. The high conductivity of RAFT polymerization was dominantly contributed by the soluble diblock copolymers in the serum, rather than their particles, except for P(MAA-b-4VP) where only the particles was obtained due to the zwitterionic interactions of PMAA segments and 4VP. In the direct current (DC) field, the behavior of these soluble diblock copolymers, P(MAA-b-AAM) and P(MAA-b-St), indicated that they were positively charged, whereas the particles of (PMAA-b-AAm) and P(MAA-b-4VP) were surprisingly negatively charged, though the composition of MAA was dominant. Soluble random copolymers of P(MAA-co-St) and P(MAA-co-4VP) represented the charge neutrality. These results indicated that the positive charges were contributed by the solvophobic block in the soluble diblock copolymers. Therefore, the diblock copolymers were the macrodipoles boosting the conductivity of solution. Meanwhile, it indicated that the electrostatic interactions of dipoles were possibly the main driving force of their self-assembly. Generally, compared with RAFT polymerization, the particles were hard to be prepared in the random copolymerization. It implies that the electrostatic interactions of diblock copolymers also played an important role in the particle formation.

两亲性含糖三嵌段共聚物的合成与自组装研究

以二(2-溴异丁酸)4,4′-联苯酯(BiBBP)为引发剂,采用顺序加料的方法,用原子转移自由基聚合法(ATRP)合成了一系列窄分子量分布的甲基丙烯酸甲酯(MMA)和6-O-甲基丙烯酰基-1,2;3,4-双-O-亚异丙基-α-D-吡喃半乳糖苷(MAIPGal)的三嵌段共聚物.用GPC和1H-NMR表征了聚合物的相对分子量和链段组成.结果表明,通过改变投料顺序可以合成ABA和BAB型2种三嵌段共聚物,改变投料比和控制单体的转化率可以调控聚合物的链段组成.聚合物脱保护后得到两亲性含糖共聚物.用TEM考察了聚合物在水溶液中的自组装行为,表明具有不同链段组成的共聚物可以形成不同形态的聚集体,含糖段组成高的聚合物易于形成大尺寸的胶团,含糖段组成低的聚合物易于形成结构清晰的囊泡、胶束,其中,含糖段在两边的BAB型共聚物易于形成囊泡,含糖段在中央的ABA型共聚物易于形成胶束.     

Polyaniline/Maleic Acid Copolymers Composites: Synthesis and Characterization

Summary: Polyaniline/maleic acid copolymers composites were synthesized by chemical in situ polymerization of aniline using ammonium peroxidisulfate as oxidant, in the presence of water soluble copolymers containing carboxylic groups. Fine dispersions of composite materials, soluble in N,N-dimethylformamide or dimethyl sulfoxide were obtained which can be processed as thin films and membranes for application as proton-conductive materials for electrolyte membranes of fuel cells. The composites were characterized by FTIR spectroscopy and thermal methods.     

Synthesis and characterization of poly[(methylsilylene ethynylenephenyleneethynylene)-co-(dimethylsilylene ethynylenephenyleneethynylene)]s

<正>A series of poly[(methylsilylene ethynylenephenyleneethynylene)-co-(dimethylsilylene ethynylenephenyleneethynylene)]s were synthesized by the incorporation of various ratios of methylsilylene to dimethylsilylene units into the polymer chain backbone.The resultant copolymers were soluble in a variety of common organic solvents at room temperature.The copolymers were characterized by FT-IR,~1H-NMR,GPC,rheological analysis,differential scanning calorimetry(DSC) and thermogravimetric analysis(TGA).The results showed that the copolymers exhibited good processability and cured at low temperatures like 200℃.The curing reactions involved in hydrosilylation of Si—H and alkyne groups and the polymerization of alkynes.Y_(d5)(5%weight loss) of the cured copolymers ranged from 629℃to 686℃,and the decomposition residues of cured copolymers at 1000℃ranged from 88.1%to 90.9%under nitrogen.Thermal stability of the copolymers increased with the introduction of methylsilylene units into polymer chains.The cured copolymers were sintered at 1450℃,and the results of X-ray diffraction analysis showed that β-SiC was formed in the sintered products.     

Synthesis and characterization of (AB)n-type poly(l-lactide)-poly(dimethyl siloxane) multiblock copolymer and the effect of its macrodiol composition on urethane formation

An (AB)_n-type multiblock copolymer containing alternating poly(l-lactide) (PLLA) and poly(dimethyl siloxane) (PDMS) segments was synthesized by chain extension of hydroxyltelechelic PLLA-PDMS-PLLA triblock copolymers, which were prepared by the ring-opening polymerization of l-lactide initiated by α,ω-functionalized hydroxyl poly(dimethyl siloxane), using 1,6-hexamethylene diisocyanate as a chain extender. The triblock and the multiblock copolymers were characterized by FT-IR, ¹H NMR and GPC. From the results of thermal analysis, two glass transition temperatures which were measured by DSC showed the occurrence of phase separation phenomena in the triblock and multiblock copolymers because of the difference of solubility parameters between PLLA and PDMS segments. The effect of the chemical composition of the triblock copolymers, including the Mw and the constitutive segment chain length of the macrodiol, on the development of the Mw of the multiblock was discussed based on diffusion effect. Furthermore, the consumption of the isocyanate groups was determined by FT-IR to investigate the dependence of the reaction kinetics of the urethane formation on the chemical composition of the triblock copolymer. The results reveal that the order of the chain extension reaction depended on the Mw of the triblock copolymer: a second order reaction was transformed into a third reaction as the Mw of the triblock copolymer increased from 7000 to 25,000 (g/mol) perhaps because of the inhibition of the formation of an active complex involved in the catalyzed-urethane reaction by the polymer chain aggregation. Finally, the mechanical properties of the multiblock copolymers demonstrated that the introduction of the extremely flexible PDMS segment substantially improved the elongation at breakage, and the tensile strength and the tensile modulus declined due to the intrinsic elasticity of such segments.     

Study of the chemical copolymerization of 2-aminoterephthalic acid and aniline.: Synthesis and copolymer properties

Aniline (ANI) and 2-aminoterephthalic acid (2ATA) copolymers, with different compositions, were prepared by chemical oxidative polymerization varying the feed ratio. The new materials have been characterized by techniques such as XPS, FTIR, Raman spectroscopies and thermal analysis. It has been checked that 2ATA units are included in the polymer backbone. Different properties have been studied as solubility, conductivity, optical absorption, fluorescence and electroactivity. The copolymers are soluble in aqueous alkaline medium and show clear electroactivity in aqueous acid medium.