嵌段序列对聚合物囊泡形成过程影响的Monte Carlo模拟

采用Monte Carlo模拟方法研究了具有相同链长和组分比的不同嵌段序列的AB两嵌段共聚物与ABA三嵌段共聚物在选择性溶剂中形成囊泡的动力学过程. 模拟结果表明, AB两嵌段共聚物囊泡的形成与ABA三嵌段共聚物囊泡的形成的动力学过程不同. 在慢速退火条件下, ABA三嵌段共聚物囊泡是通过亲水链段向胶束的表面和中心扩散而形成的, 而AB两嵌段共聚物囊泡则由片层弯曲闭合而形成. 相对而言, 退火速度对AB两嵌段共聚物囊泡形成的动力学过程没有显著影响, 其改变仅影响亲水链段与疏水链段发生相分离的难易程度. 当退火速度较快时, 亲水链段和疏水链段发生相分离的速度较快且相分离发生在囊泡形成之前; 而当退火速度较慢时亲水链段和疏水链段之间的相分离在囊泡形成之后仍在进行.     

磷酰胆碱基pH敏感性ABA型嵌段共聚物的合成与胶束化

采用氯化亚铜/2,2-联二吡啶催化体系, 2,5-二溴己二酸二乙酯为引发剂, 甲醇为溶剂运用希莱克技术, 利用原子转移自由基聚合(ATRP)方法合成了ABA型三嵌段共聚物PDEAEMA-b-PMPC-b-PDEAEMA. ¹H NMR和GPC(凝胶渗透色谱)对聚合物组成、结构及分子量进行了表征, 利用透光率、粘度测定研究了嵌段共聚物溶液的pH敏感性, 利用表面张力测定、荧光探针和透射电镜研究了嵌段共聚物胶束化作用, 确定了共聚物水溶液的临界胶束浓度(CMC). 结果表明所合成的ABA型三嵌段共聚物水溶液具有pH敏感性, 其临界相变pH 7～7.5. 调节溶液pH值可实现嵌段共聚物胶束化形成“花状”胶束, 并测定了其临界胶束浓度.     

多嵌段共聚物(P4VP-b-PS-b-P4VP)_n的胶束化行为研究

研究了一系列具有不同链段长度和组成的聚4-乙烯基吡啶-聚苯乙烯-聚4-乙烯基吡啶多嵌段共聚物(P4VP-b-PS-b-P4VP)n在其选择性溶剂甲苯和pH<3的水中的胶束化过程,主要研究了多嵌段共聚物链段长度、溶液浓度和溶剂对其胶束形态的影响.透射电镜和原子力显微镜结果表明随着P4VP段链的相对增长,多嵌段共聚物在甲苯中的胶束形态由蠕虫链状向短棒状到球状胶束变化,而其在pH<3的水溶液中均形成球形胶束.由于特殊的链结构,聚合物的浓度对(P4VP-b-PS-b-P4VP)n多嵌段共聚物的胶束行为和胶束形态有着重要的影响.同时,(P4VP-b-PS-b-P4VP)n多嵌段共聚物分子量分布的多分散性对其在选择性溶剂中的胶束形态也有所影响.     

三嵌段刷状共聚物的合成及溶液组装制备多孔纳米粒子

结合可控自由基聚合和铜催化的叠氮-炔环加成(Cu AAC)反应,合成了coil-brush-coil型三嵌段刷状共聚物.其中coil段为亲水性的聚(N,N′-二甲基丙烯酰胺)(PDMA),brush段为高密度接枝V形侧链的疏水性聚丙烯酸酯.由于其两亲性特征及刷状拓扑结构所赋予的主链刚性,该嵌段共聚物在选择性溶剂甲醇和乙醇中可分别自组装得到片状胶束和囊泡.刷状嵌段的V形侧链包含聚苯乙烯(PS)和聚左旋丙交酯(PLLA)2条链,它们在胶束(或囊泡)组装体的核(或壁)区发生微相分离得到有序的柱状相分离形貌.将离散柱状PLLA相水解,即可得到核或壁具有多孔结构的片状胶束或囊泡.     

聚乙二醇-聚乳酸-聚甲基丙烯酸羟乙酯两亲性三嵌段聚合物的合成及其自组装研究

具有生物相容性的两亲性嵌段共聚物在水中易形成胶束,在医学诊断、体内药物缓释及药物靶向输送方面具有广阔的应用前景.利用二嵌段聚合物聚乙二醇-聚乳酸(PEG-PLA)引发甲基丙烯酸羟乙酯的原子转移自由基聚合,制备了两亲性三嵌段聚合物聚乙二醇-聚乳酸-聚甲基丙烯酸羟乙酯(PEG-PLA-PHEMA),利用凝胶渗透色谱(GPC),红外光谱(FT-IR),1H NMR表征了其聚合物组成;然后利用透析法制备了不同分子量的聚合物胶束,动态光散射(DLS)和透射电镜(TEM)结果表明其形貌规整、尺寸均一,而且胶束粒径在PEG和PLA链段长度不变的条件下,随PHEMA链段的变长而增大.PHEMA链上大量羟基的存在为聚合物胶束的功能化改性提供了反应位点,加上本身完全由具良好生物相容性的聚合物制备,使其在可控药物释放方面具有很大的应用潜力.     

叶酸封端的聚(碳酸酯-co-乙二醇)嵌段共聚物的合成及其胶束的制备

在不添加催化剂的情况下,通过聚乙二醇单甲醚(mPEG)引发5,5-二甲基-1,3-二噁烷-2-酮(DTC)本体开环聚合,得到了生物可降解脂肪族聚(碳酸酯-co-乙二醇)(DMP)两亲性嵌段共聚物。将其与叶酸(FA)反应,合成了末端含有叶酸的生物可降解两亲性嵌段共聚物(FA-DMP)。所得聚合物结构经傅里叶变换红外光谱(FT-IR)、核磁共振谱(1 H-NMR)、紫外光谱(UV-Vis)、凝胶渗透色谱(GPC)表征。利用聚合物FA-DMP的两亲性结构特点,采用透析法制备了其聚合物胶束。结果表明,在不添加任何催化剂的情况下,利用mPEG的端羟基可成功引发DTC开环聚合,且通过改变投料比可调控DMP嵌段共聚物的分子量;FA-DMP聚合物可形成具有一定纳米尺寸的胶束,且其粒径与聚合物的亲水-疏水链链长有关。     

由可控聚合反应直接制备不同形貌的聚集体

由可控聚合,包括活性阴离子和自由基聚合直接制备不同形貌纳米材料,是近几年来合成化学领域的一个重要研究成果.与两亲性嵌段共聚物在选择性溶剂中自组装方法不同,在选择性溶剂中进行的分散聚合,首先生成两亲性嵌段共聚物,并逐渐增加第二段聚合物的链长,以实现相分离,形成球形胶束;聚合物链继续增长,实现形貌转变,从而制备预期的聚合物形貌,包括球形胶束、纳米棒、纳米线、囊泡和复合囊泡等.本文综述了乳液聚合法制备球形胶束等形貌;描述了不同聚合体系形成的形貌以及它们的性质和应用,讨论了形貌的形成机理和控制方法,同时指出了存在的问题.     

ATRP法合成两亲性嵌段共聚物PSt-b-PAA及其在离子液体[BMIM][PF6]中的自组装行为研究

利用原子转移自由基聚合法(ATRP)合成了分子量可控、分子量分布窄的嵌段共聚物聚苯乙烯-b-聚丙烯酸叔丁酯(PSt-b-PtBA), 进而在酸性条件下由水解反应得到了两亲性嵌段共聚物聚苯乙烯-b-聚丙烯酸(PSt-b-PAA), 并通过凝胶渗透色谱(GPC)、傅立叶变换红外光谱(FTIR)、核磁共振(1H NMR)等测试手段对产物进行了表征. 使三种分子量不同的两亲性嵌段共聚物在离子液体1-丁基-3-甲基咪唑六氟磷酸盐([BMIM][PF6])中进行自组装, 通过激光粒度分析仪(DLS)和透射电子显微镜(TEM)研究了聚合物在离子液体中自组装的胶束尺寸和结构形态. 当PSt的链段长度一定时, 胶束的形状主要依赖于PAA链的长度. 当PAA链段较长时, 胶束呈球形; 当PAA链段较短时, 则变成不规则的花生状胶束.     

分子量规整聚p-乙烯基苯甲酸及苯乙烯p-乙烯基苯甲酸两嵌段共聚物的合成

当两嵌段共聚物为由性质不同的规制 (Ｗｅｌｌ ｄｅｆｉｎｅｄ)分子量两链段所构成时 ,在只对其中一链段为良溶剂的选择性溶剂中 ,它能够自组装形成尺寸均一的胶束 .胶束的形态与共聚物的组成、浓度、溶剂的性质等关系密切[1] .因此 ,两嵌段共聚物的合成颇被关注[2 ] .这一性质使得嵌段共聚物在分子识别、药物和其他物质的输送、基因疗法、水系涂料、污染物的除去、催化剂以及传感器等方面展示着潜在的应用前景 .规制分子量的两嵌段共聚合物的合成主要通过阴离子、阳离子、开环易位、基团转移等活性或可控聚合来实现 .但是这些方法受到单体…     

AB型聚乙二醇单甲醚-聚(L-丙氨酸)嵌段共聚物自组装过程的核磁共振研究

利用核磁共振方法研究了AB型双嵌段共聚物(MPEG45-b-PA32)在选择性溶剂中的自组装行为及胶束化过程.嵌段共聚物在三氟乙酸中聚氨基酸和聚乙二醇链段均处于自由运动状态,聚丙氨酸链段为无规线团结构.在向该溶液中逐渐加入氘代水的过程中,聚丙氨酸链段又重新聚集形成规整的二级结构.结合1H-NMR和COSY谱分析,结果显示这一自组装过程伴随着聚(L-丙氨酸)链段由无规线团向α-螺旋结构的构象转变,同时嵌段共聚物逐渐形成核-壳型胶束结构.利用透射电镜观察了所形成胶束的形态,嵌段共聚物主要形成粒径150 nm到220 nm的球形胶束.     

Self-organization behavior of methacrylate-based amphiphilic di- and triblock copolymers

Amphiphilic di- and triblock copolymers having different hydrophilic-to-hydrophobic block length ratio were synthesized using ATRP. The self-assembly behavior of these AB and ABA block copolymers consisting of poly(n-butyl methacrylate) (B) and poly(2,2-(dimethylaminoethyl methacrylate) (A) was investigated using a combination of dynamic light scattering, negative-stain transmission electron microscopy, cryoelectron microscopy, and atomic force microscopy. Two populations of self-organized structures in aqueous solution, micelles and compound micelles, were detected for diblock copolymers. Triblock copolymers assembled into vesicular structures of uniform sizes. Furthermore it was found that these vesicles tended to compensate the high curvature by additional organization of the polymer chains outside of the membrane. The chain hydrophilicity of the polymers appeared to have a critical impact on the self-assembly response toward temperature change. The self-reorganization of the polymers at different temperatures is discussed.     

pH Responsivity and micelle formation of gradient copolymers of methacrylic acid and methyl methacrylate in aqueous solution

A series of gradient copolymers of methacrylic acid (MAA)/methyl methacrylate (MMA) with four end-to-end composition profiles (uniform, linear gradient, triblock with linear gradient midblock, and diblock) but all having an average chain composition of ?F(MMA) ≈ 0.5 and an average chain length of 200 were synthesized via model-based, computer-programmed, semibatch atom-transfer radical copolymerization (ATRcoP). These samples allowed us to investigate systematically the effects of the gradient composition profile on the pH responsivity and micelle formation of the copolymers in an aqueous solution. Measurements included light transmittance, TEM, AFM, DLS, (1)H NMR, and pH titration. It was found that linear gradient, triblock, and diblock copolymers formed spherical micelles at high pH. The micelles of the linear gradient copolymer contained MMA units in their hydrophilic shells, and those of the triblock and diblock copolymers had all of their MMA units residing in their cores. The composition profile showed a strong effect on the degree of acid dissociation at a given pH. The conformational transition of the copolymer chains was determined by both the pH value and composition profile. Copolymers having sharper gradients required a lower pH to trigger the conformational transition and a narrower pH range to complete the transition.     

Poly(sodium styrene sulfonate)-b-poly(methyl methacrylate) diblock copolymers through direct atom transfer radical polymerization: Influence of hydrophilic–hydrophobic balance on self-organization in aqueous solution

A series of poly(sodium styrene sulfonate)-b-poly(methyl methacrylate), PSSNa-b-PMMA, amphiphilic diblock copolymers have been synthesized through atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in N,N-dimethylformamide/water mixtures, starting from a PSSNa macroinitiator. The kinetics of the polymerization was followed by ¹H NMR, while the chemical composition of the copolymers was verified by a variety of techniques, such as ¹H NMR, FTIR and TGA. The MMA content of the copolymers ranges from 0 up to 60 mol%, while the number–average molecular weight of the PSSNa macroinitiator was 9000 g/mol. The self-association of the diblock copolymers in aqueous solution was compared to the respective behavior of similar random P(SSNa-co-MMA) copolymers through optical density measurements, pyrene fluorescence probing, dynamic light scattering and surface tension measurements. It is shown that the diblock copolymers form micellar structures in water, characterized by an increasing hydrophobic character and a decreasing size as the length of the PMMA block increases. These micelle-like structures turn from surface inactive to surface active as the length of the PMMA block increases. Moreover, contrary to the MMA-rich random copolymers, the respective diblock copolymers form water insoluble polymer/surfactant complexes with cationic surfactants such as hexadecyltrimethyl ammonium bromide (HTAB), leading to materials with antimicrobial activity.     

Synthesis and Self-Assembly Behaviors of Four-Arm Star Block Copolymers Poly(ϵ-caprolactone)-b-poly(2- (diethylamino) ethyl methacrylate)) in Aqueous Solution

Four-arm star block polymers consisting of hydrophobic poly(?-caprolactone) (PCL) block and hydrophilic poly(2-(diethylamino) ethyl methacrylate)) (PDEAEMA) block were successfully synthesized by ring opening polymerization (ROP) and atom transfer radical polymerization (ATRP). Chain lengths of PDEAEMA segments were varied to obtain a series of star copolymers with different hydrophilic/hydrophobic ratio, which were desired for self-assembly study. Dynamic light scattering (DLS) and transmission electron microscopic (TEM) were used to study their self-assembly behavior. In the PBS solution with different pH value, the star polymers formed micelles or nanoparticles. Furthermore, the morphologies of the micelles were also pH-dependent. Critical micelle concentrations of star copolymers changed from 5.0 to 17.5 mg/L with the increase of hydrophilic block length or the pH decrease. Moreover, a steady increase was found on the micelles diameters when the pH decreased from 7.0 to 3.0. The low CMC value and slight changes on micelle diameter indicated that the micelle remained stable under the changing external stimulus.     

可聚合的光引发转移终止剂合成接枝共聚物

采用一种可聚合的光引发转移终止剂 ,2 N ,N 二乙基二硫代氨基甲酰氧基乙酸 β 甲基丙烯酰氧基乙酯 (MAEDCA) ,通过两种途径制备了含有聚甲基丙烯酸甲酯 (PMMA)和聚苯乙烯 (PSt)链段的接枝共聚物 .其一是将MAEDCA作为引发剂 ,在紫外光照射下引发MMA聚合 ,得到大分子单体 ,通过大分子单体与St的共聚合得到 .考察了所用大分子单体的分子量和浓度对共聚合的影响 .其二是将MAEDCA作为单体与MMA共聚得到侧链上含有N ,N 二乙基二硫代氨基甲酰氧基 (DC)基团的无规共聚物 ,P(MMA co MAEDCA) .在紫外光照射下 ,P(MMA co MAEDCA)作为大分子引发剂引发St聚合 ,得到P(MMA co MAEDCA) g PSt的共聚物 ,研究了接枝共聚合过程的活性自由基聚合特征     

Phase diagrams,mechanisms and unique characteristics of alternating-structured polymer self-assembly via simulations

Alternating-structured polymers(ASPs), like alternating copolymers, regular multiblock copolymers and polycondensates, are very important polymer structures with broad applications in photoelectric materials. However, their self-assembly behaviors,especially the self-assembly of alternating copolymers, have not been clearly studied up to now. Meanwhile, the unique characteristics therein have not been systematically disclosed yet by both experiments and theories. Herein, we have performed a systematic simulation study on the self-assembly of ASPs with two coil alternating segments in solution through dissipative particle dynamics(DPD) simulations. Several morphological phase diagrams were constructed as functions of different impact parameters. Diverse self-assemblies were observed, including spherical micelles, micelle networks, worm-like micelles, disklike micelles, multimicelle aggregates, bicontinuous micelles, vesicles, nanotubes and channelized micelles. Furthermore, a morphological evolutionary roadmap for all these self-assemblies was constructed, along with which the detailed molecular packing models and self-assembly mechanisms for each aggregate were disclosed. The ASPs were found to adopt a folded-chain mechanism in the self-assemblies. Finally, the unique characteristics for the self-assembly of alternating copolymers were revealed especially, including(1) ultra-fine and uniform feature sizes of the aggregates;(2) independence of self-assembled structures from molecular weight and molecular weight distribution;(3) ultra-small unimolecular aggregates. We believe the current work is beneficial for understanding the self-assembly of alternating structured polymers in solution and can serve as a guide for the further experiments.     

Small-angle neutron scattering study of adsorbed pluronic tri-block copolymers on laponite

The adsorption of selected poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) tri-block copolymers on synthetic clay particles (laponite) has been investigated. The adsorbed amount and distribution of polymer was determined as a function of relative block composition and size, using the technique of contrast variation small-angle neutron scattering. The pluronic molecules appear to adsorb via a preferential segregation of hydrophobic PPO segments at the surface, with hydrophilic PEO segments dangling into solution. The effect of the PPO segments is substantial with large increases in adsorbed amount and layer thickness as the anchor fraction decreases/PEO chain length increases. This is in direct contrast to the behavior observed for PEO homopolymer adsorption (of much higher molecular weights) where the adsorbed amount and layer thickness are smaller and change little with molecular weight.     

Synthesis of Poly(methyl methacrylate)-poly(poly(ethylene glycol) methacrylate)-polyisobutylene ABCBA Pentablock Copolymers by Combining Quasiliving Carbocationic and Atom Transfer Radical Polymerizations and Characterization Thereof

Novel, unique amphiphilic pentablock terpolymers consisting of the highly hydrophobic polyisobutylene (PIB) mid-segment attached to the hydrophilic combshaped poly(poly(ethylene glycol) methacrylate) (PPEGMA) polymacromonomer chains, which are coupled to poly(methyl methacrylate) (PMMA) outer segments were synthesized by the combination of quasiliving carbocationic polymerization and atom transfer radical polymerization (ATRP). First, a bifunctional PIB macroinitiator was prepared by quasiliving carbocationic polymerization and subsequent quantitative chain end derivatizations. Quasiliving ATRP of PEGMAs with different molecular weights (M_n = 188, 300 and 475 g/mol) led to triblock copolymers which were further reacted with MMA under ATRP conditions to obtain PMMA-PPEGMA-PIB-PPEGMA-PMMA ABCBA-type pentablock copolymers. It was found that slow initiation takes place between the PIB macroinitiator and PEGMA macromonomers with higher molecular weights via ATRP. ATRP of MMA with the resulting block copolymers composed of PIB and PPEGMA chain segments led to the desired block copolymers with high initiating efficiency. Investigations of the resulting pentablock copolymers by DSC, SAXS and phase mode AFM revealed that nanophase separation occurs in these new macromolecular structures with average domain distances of 11-14 nm, and local lamellar self-assembly takes place in the pentablocks with PPEGMA polymacromonomer segments of PEGMAs with M_n of 118 g/mol and 300 g/mol, while disordered nanophases are observed in the block copolymer with PEGMA having molecular weight of 475 g/mol. These new amphiphilic block copolymers composed of biocompatible chain segments can find applications in a variety of advanced fields.     

Multicompartment Micelles From π-Shaped ABC Block Copolymers

Dissipative particle dynamics simulations were performed on the morphology and structure of multicompartmerit micelles formed from n-shaped ABC block copolymers in water. The influences of chain architectures were studied in a systematic way, and a rich variety of morphologies were observed, such as spherical, wormlike, X-shaped, Y-shaped, ribbon-like, layered rod-like, layered disk-like, as well as network morphologies. The simulations show that the distance between the two grafts plays an important role in control of the morphology. Since n-shaped ABC block copolymers can be reduced to linear ABC and star ABC block copolymers, they are good model copolymers for studying the self-assembly of complex block copolymers into micelles. The knowledge obtained in this work as well as the new morphologies identified provide useful information for future rational design and synthesis of novel multicompartment micelles.     

Formation of hybrid wormlike micelles upon mixing cetyl trimethylammonium bromide with poly(methyl methacrylate-co-sodium styrene sulfonate) copolymers in aqueous solution

The association of cetyltrimethylammonium bromide, CTAB, with a series of P(MMAx-co-SSNa) random copolymers of sodium styrene sulfonate (SSNa) with methyl methacrylate (MMA) was explored in aqueous solution as a function of the MMA molar content, x, of the copolymers. The polyelectrolyte/surfactant complexation in aqueous solution was verified through pyrene fluorescence probing. In addition, turbidimetry studies in dilute or more concentrated aqueous solutions elucidated the phase separation behavior of the P(MMAx-co-SSNa)/CTAB systems as a function of the copolymer composition x and the surfactant to polyelectrolyte mixing charge ratio. It is found that practically phase separation is completely suppressed within the studied mixing range when the MMA content of the copolymers is ～30-40 mol%. For lower MMA contents the polyelectrolyte/surfactant complex separates out from water, while for higher x values the solubility limits of the copolymers in water are attained. For the intermediate MMA contents, viscoelastic systems are obtained in more concentrated polymer/surfactant solutions provided that the polyelectrolyte is fully complexed with the cationic surfactant ((1)H NMR results). Moreover, the (1)H NMR studies indicate that hybrid P(MMAx-co-SSNa)/CTAB wormlike micelles are formed in water under these conditions. Finally, it is shown that addition of salt prevents syneresis problems and facilitates the rheological investigation.