高效液相色谱法测定塑料食品包装材料中8种苯并三唑类紫外吸收剂EI北大核心CSCD

建立了同时测定塑料食品包装材料中8种苯并三唑类紫外吸收剂(UV-P、UV-234、UV-320、UV-326、UV-327、UV-328、UV-329和UV-360)的高效液相色谱-二极管阵列检测法。样品经5 m L乙酸乙酯+二氯甲烷(V/V=4:1)在20℃超声提取10 min后,以甲醇、乙腈和水为流动相梯度洗脱,经Eclipse XDB-C_(18)柱分离,在340 nm处检测。UV-P和UV-360以及其他6种紫外线吸收剂分别在0.02~10,0.2~10和0.1~10 mg/L的质量浓度范围内呈良好的线性关系。8种紫外吸收剂的线性相关系数均大于0.9999;仪器的检出限(S/N=3)为0.0074~0.1250mg/L。3种不同添加水平下的样品加标平均回收率为93.7%~114.3%,相对标准偏差均不高于5.0%(n=6)。     

高效液相色谱法测定塑料食品包装材料中8种苯并三唑类紫外吸收剂

建立了同时测定塑料食品包装材料中8种苯并三唑类紫外吸收剂(UV-P、UV-234、UV-320、UV-326、UV-327、UV-328、UV-329和UV-360)的高效液相色谱-二极管阵列检测法。样品经5 m L乙酸乙酯+二氯甲烷(V/V=4:1)在20℃超声提取10 min后,以甲醇、乙腈和水为流动相梯度洗脱,经Eclipse XDB-C_(18)柱分离,在340 nm处检测。UV-P和UV-360以及其他6种紫外线吸收剂分别在0.02~10,0.2~10和0.1~10 mg/L的质量浓度范围内呈良好的线性关系。8种紫外吸收剂的线性相关系数均大于0.9999;仪器的检出限(S/N=3)为0.0074~0.1250mg/L。3种不同添加水平下的样品加标平均回收率为93.7%~114.3%,相对标准偏差均不高于5.0%(n=6)。     

高效液相色谱法同时测定食品接触材料中抗氧化剂和紫外吸收剂的迁移量

采用高效液相色谱技术,建立了食品接触材料中多种抗氧化剂和紫外吸收剂迁移水平的检测方法。该方法测定的23种目标化合物具有较好的线性关系,相关系数（r²）≥ 0.9998,检出限和定量限分别在0.01到0.22 mg/L之间和0.03到0.85 mg/L之间。依据欧盟指令（EU）No. 10/2011,考察了5种食品模拟物30 g/L乙酸、10%（v/v）乙醇、20%（v/v）乙醇、50%（v/v）乙醇和油类模拟物（异辛烷）中抗氧化剂和紫外吸收剂的迁移量。该方法回收率在92.8%~117.7%之间,相对标准偏差在0.95%~9.72%之间。探讨了不同实验条件对抗氧化剂和紫外吸收剂回收率的影响。结果表明,该方法准确、稳定,完全满足欧盟指令（EU）No 10/2011和GB 9685-2008对食品接触材料及制品中抗氧化剂和紫外吸收剂特定迁移量（SML）的限量要求,并利用该方法测定了30批次食品接触材料中抗氧化剂和紫外吸收剂的迁移水平。     

固相萃取/超高效液相色谱法测定纺织品中14种紫外吸收剂

建立了固相萃取(SPE)净化,超高效液相色谱(UPLC)同时测定纺织品中14种二苯甲酮类(BPs)和苯并三唑类(BZTs)紫外吸收剂的分析方法。样品以甲醇-四氢呋喃超声提取,提取液经ENVI-Carb固相萃取柱净化后,在C18色谱柱和乙腈-0.1%甲酸水流动相下梯度洗脱分离,二极管阵列检测器测定。结果表明,14种紫外吸收剂在0.1~50 mg/L浓度范围内线性关系良好,相关系数均大于0.999;方法检出限为1~5mg/kg;阴性涤纶和腈纶样品在3个加标水平下的平均回收率(n=6)为81.5%~99.1%,相对标准偏差(RSD)为2.8%~7.5%。该方法简单快速,回收率和精密度良好,适用于纺织品中14种紫外吸收剂的同时测定。     

GC-MS/MS法对焙烤食品及其塑料包装材料中25种磷酸三酯类与邻苯二甲酸酯类化合物的同时测定

建立了气相色谱-质谱/质谱(GC-MS/MS)测定焙烤食品及其塑料包装材料中25种磷酸三酯类及邻苯二甲酸酯类化合物的高通量检测方法。焙烤食品以乙腈-丙酮(8∶2,体积比)超声提取,采用50 mg C18和50 mg PSA混合填料进行Qu ECh ERS净化;塑料包装材料经二氯甲烷-甲醇超声提取后直接检测。样液经DB-5 ms色谱柱分离,选择反应监测(SRM)模式测定。25种化合物在各自线性范围内的相关系数不小于0.997 5,方法检出限为10~500μg/kg,平均回收率为80.2%~119.6%,相对标准偏差(n=6)为1.5%~9.4%。该方法操作简单,净化效果好,可有效消除基质效应,适用于不同焙烤食品及其塑料包装材料中磷酸三酯类及邻苯二甲酸酯类化合物的同时测定。     

高效液相色谱-串联质谱法检测塑料类食品接触材料中9种紫外吸收剂的特定总迁移量

建立了高效液相色谱-串联质谱(HPLC-MS/MS)同时测定塑料制品食品模拟物(10%乙醇、20%乙醇、50%乙醇、3%乙酸和橄榄油)浸泡液中UV-24,UV-0,UV-9,DHBP,UV-531,HHBP,UV-P,UV-327和UV-326共9种紫外吸收剂的特定总迁移量的方法。以食品模拟物浸泡待测样品,冷却至室温并混匀,水基食品模拟物(10%乙醇、3%乙酸、20%乙醇、50%乙醇)用乙醇1∶10稀释,经亲水性聚四氟乙烯(PTFE)针头过滤器过滤后进样;橄榄油用乙腈正庚烷提取后,下清液用PTFE过滤器过滤后进样。采用C8柱梯度洗脱分离;质谱采用电喷雾离子源,在负离子多反应监测(MRM)模式下运行。方法的线性关系良好(r≥0.995 4),在5种食品模拟物中的定量下限为0.01~0.30 mg/kg;1~35 mg/kg加标水平下的回收率为80.0%~127%,相对标准偏差(RSD)为0.8%~8.0%。该方法的色谱分离效果和线性关系较好,回收率和准确度高,可用于实际样品的检测。     

超声萃取-高效液相色谱法同时测定人造革中7种苯并三唑类紫外线吸收剂含量

建立了超声萃取-高效液相色谱法(HPLC)同时测定人造革中7种苯并三唑类紫外线吸收剂UV-P、UV-326、UV-327、UV-329、UV-350、UV-320和UV-328含量的方法。该方法以甲醇为萃取溶剂,超声萃取人造革中的苯并三唑类紫外线吸收剂,萃取液经处理后直接进行HPLC分析,外标法定量。在信噪比(S/N)=3的条件下,UV-P、UV-326、UV-327、UV-329、UV-350的检出限均为0.05mg/kg,UV-320、UV-328的检出限均为0.10 mg/kg。在3个不同加标浓度水平下,各组分的平均加标回收率为88.19%~98.32%,相对标准偏差(RSD)为0.61%~3.74%。该方法简便快捷、灵敏度高,可用于人造革中苯并三唑类紫外线吸收剂的测定。采用该方法对市售人造革样品进行测定,结果在6个样品中检出了不同浓度水平的UV-P和UV-329。     

气相色谱–质谱法测定塑胶中8种苯并三唑紫外吸收剂

以气相色谱–质谱联用法测定塑胶中8种苯并三唑紫外吸收剂的含量。采用甲苯作为萃取溶剂,对样品进行超声萃取,选用DB–5HT气相分离色谱柱,以气相色谱–质谱联用仪对塑胶制品中8种苯并三唑类紫外吸收剂(UV–P,UV–320,UV–326,UV–327,UV–328,UV–329,UV–234,UV–360)进行分析测试。在优化的前处理和仪器分析条件下,8种苯并三唑紫外吸收剂萃取效果良好,在17 min内有效分离,色谱峰理想。在0.1~10 mg/L范围内溶液的质量浓度与色谱峰面积线性良好,线性相关系数(r~2)均大于0.999,检出限为0.1 mg/L,重复性试验相对标准偏差小于3%(n=7),加标回收率为95%~110%。该方法简便快捷、准确可靠,满足苯并三唑紫外吸收剂的检测要求。     

超高效合相色谱法快速检测塑料食品接触材料中13种紫外吸收剂

建立了一种同时检测塑料食品接触材料中13种紫外吸收剂的超高效合相色谱法。以甲醇为溶剂对塑料食品接触材料样品进行超声提取，经C18固相萃取柱净化，过0.22 μm有机滤膜，采用超高效合相色谱仪分析。选择ACQUTY UPC² HSS C18 SB色谱柱（150 mm×3.0 mm，1.8 μm），以超临界二氧化碳为流动相，异丙醇为改性剂进行梯度洗脱，在最优色谱条件下，13种紫外吸收剂能够在4 min内实现有效分离。结果表明，在各自线性范围内，13种紫外吸收剂的线性关系良好，标准曲线相关系数不低于0.9985，检出限（S/N=3）为0.05~0.15 mg/kg，加标回收率为86.8%~115.7%，相对标准偏差为0.73%~5.61%。该方法快速简便，准确可靠，同时大大减少了有机溶剂的消耗，可用于塑料食品接触材料中13种紫外吸收剂的快速检测。     

超高效液相色谱法测定涂料中11种紫外吸收剂

建立了同时测定涂料中11种苯甲酮类和苯并三唑类紫外吸收剂的超高效液相色谱(UPLC)分析方法。乳胶漆类样品经水分散后,乙酸乙酯提取;木器清漆类样品以乙腈直接提取。提取液以C18色谱柱为分离柱,在乙腈-水流动相体系下变流速洗脱分离,二极管阵列检测器检测。结果表明,11种紫外吸收剂在0.1~50 mg/L浓度范围内线性关系良好,相关系数(r)均不小于0.999 0;方法检出限为10~30 mg/kg;3个加标水平下的平均回收率(n=6)为80.7%~107%,相对标准偏差(RSD)为3.0%~8.7%。该方法简单、快速,回收率和精密度良好,适用于涂料中11种紫外吸收剂的同时测定。     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.