高质量尺寸可调CuFeS2纳米晶的合成与光电性质

制备了单分散性良好且尺寸可调的具有荧光性质的CuFeS2纳米晶,利用紫外-可见吸收光谱(UVVis)、荧光光谱、透射电子显微镜(TEM)、X射线粉末衍射(XRD)、元素分析和光电流测试等技术对其组分和结构进行了表征,分析了CuFeS2纳米晶尺寸变化对吸收光谱和光电响应行为的影响规律.随着CuFeS2纳米晶尺寸增大,其吸收峰位表现出符合量子尺寸效应的相应红移;具有荧光性质的CuFeS2纳米晶可控制备预示其在生物医学成像和光电器件等领域具有应用前景.     

硅纳米晶的制备及其在太阳电池中的应用研究

硅纳米晶由于量子限域效应的作用而产生了多种不同于体硅材料的新特性,如荧光效应显著、光学带隙可调等,因而在微电子、光伏、生物医学等领域受到极大的重视。本文介绍了分立的硅纳米晶颗粒和硅纳米晶薄膜的制备方法,并对比了不同方法制备硅纳米晶体的优缺点。着重介绍了硅纳米晶体在太阳电池中应用的几种方式,包括利用纯硅纳米晶薄膜制备太阳电池、硅纳米晶体与有机薄膜基质结合形成复合结构太阳电池、含有硅纳米晶颗粒的硅墨水在太阳电池中的应用等。     

熔盐法合成NiO纳米微晶

纳米科技的基础是纳米结构材料的合成．它是纳米科技在分散与包覆、高比表面材料、功能纳米器件、强化材料等方面实现突破的起点。纳米颗粒（1-100nm）本身具有宏观量子隧道效应、量子尺寸效应、表面效应许多独特的性能．其制备研究日益得到广泛关注和重视．     

石墨烯-量子点复合材料的制备与应用

石墨烯因其独特的物理化学性质以及潜在的巨大应用价值引起了越来越多的研究兴趣,但其特殊的零带隙结构却限制了它在光电领域的应用。半导体量子点因其特有的量子尺寸效应而表现出迷人的光学性能,已成功应用于生物标记及电化学等领域,但电子-空穴对易复合湮灭,导致电子迁移率较低,限制了其在光电转换方面的应用。石墨烯独特的结构和电子特性使其成为优秀的导电支架,可从量子点中捕获并输运电子,实现了电子空穴对的有效分离。石墨烯-量子点复合材料不仅具有石墨烯的高电子传输性能,而且具备量子点特殊结构产生的量子尺寸效应和边缘效应,二者复合后在纳米器件和光电器件等领域极具应用潜力。本文详细总结了近年来石墨烯-量子点复合材料的制备方法,包括相转移法、静电复合、水热和溶剂热法以及电化学法和微波辅助法等,并简要介绍了相关应用领域的研究进展,以期为石墨烯基纳米复合材料的发展研究提供相关的参考与依据。     

Ⅰ-Ⅲ-Ⅵ族半导体纳米晶:合成,性质及应用（英文）

半导体纳米晶具有独特的量子限域效应以及新颖的尺寸和形貌依赖特性,已被证实是在低成本高性能光伏器件、光致及电致发光二极管、生物成像、光催化等领域非常具有潜力的新型材料.其中,II-VI族与I-III-VI族半导体纳米晶由于其优异的性能在过去的数十年中引起了广泛的关注.过去数十年对于II-VI族半导体纳米晶的研究已经十分成熟,然而几乎所有的传统II-VI族半导体纳米晶都含有对环境有害的元素,对人体和环境造成不可逆转的伤害,从而限制了II-VI族半导体纳米晶的进一步应用.与二元II-VI族纳米晶相比,大部分三元I-III-VI族纳米晶不含镉和铅等重金属元素,因而具有低毒性的特点,并且其带隙窄、吸光收系数大、斯托克斯位移大、自吸收小以及发光波长在近红外区,所以有望使其成为新一代荧光纳米晶材料.例如,CuInS_2的带隙为1.53 eV,与太阳光谱匹配且其吸光系数较大,在10.5cm.~1左右,从而使其成为制备太阳能电池的一种优秀材料.另一方面,I-III-VI族纳米晶在可见光和近红外范围内呈现与尺寸相关的发光,它们的荧光量子产率在包覆ZnS壳后可超过50%,因而在照明,显示和生物成像领域具广泛应用的潜力.水溶性的I-III-VI族量子点粒径尺寸可以小于10 nm,可以减小纳米颗粒通过肾清除的淘汰率,并且具有高荧光性能和耐光性的特点,因此成为进行生物成像工作的优秀材料.与此同时,I-III-VI族纳米晶在光催化领域也展现了巨大的发展前景.本综述主要关注I-III-VI族纳米晶的合成,性质及应用.首先,我们概述了不同的化学合成方法,并列举讨论了一些经典的工作,根据纳米晶的种类分类统计了主要合成方法、形貌及尺寸.第二部分,我们讨论了它们的光物理和电子特性,解释了纳米晶的"donor-acceptor pair"(DAP)结合机理,概述了I-III-VI族纳米晶的磁光现象.接下来,我们概述了I-III-VI族纳米晶主要的应用领域,着重总结了在太阳能电池领域、半导体发光二极管领域、生物成像领域以及光催化制氢领域的研究进展.最后,我们会讨论半导体纳米晶的应用前景,以及它的机遇和挑战.     

Ⅰ-Ⅲ-Ⅵ族半导体纳米晶

半导体纳米晶是近年来发展起来的一类新型功能材料,因其独特的量子限域效应和光电性质,在太阳电池、发光二极管、光电探测器、生物标记、非线性光学等领域中具有潜在的应用。与目前研究比较多的Ⅱ-Ⅵ和Ⅳ-Ⅵ族纳米晶相比,Ⅰ-Ⅲ-Ⅵ族半导体纳米晶,不含镉和铅等重金属元素,具有毒性小、带隙窄、光吸收系数大、Stokes位移大、自吸收小以及发光波长在近红外区等特点,有望成为新一代低成本太阳电池和低毒荧光量子点生物标记材料, 还可用于发光二极管和光电探测等领域。因此,Ⅰ-Ⅲ-Ⅵ族半导体纳米晶的合成、性质及应用研究成为近期纳米晶研究领域的热点之一。本文将综述Ⅰ-Ⅲ-Ⅵ族半导体纳米晶的研究进展,着重介绍其制备方法、光学性质及其在生物标记、太阳电池等领域的应用。     

聚苯胺微／纳米结构及其应用

导电聚合物微／纳米结构保留了轻质、类金属电导率和可逆化学和电化学特性,又具有纳米材料的高比表面积、尺寸和量子效应,它在电子器件、储能器件、传感器件等领域具有广泛的技术应用前景。其中,由于聚苯胺的制备方法简单、原料易得和独特的质子酸掺杂和脱掺杂机制,使聚苯胺微／纳米结构的可控制备及其应用研究已成为当前导电聚合物研究的热点...     

NEWS

量子尺寸的金纳米颗粒,又称为金纳米簇(Au NCs),近年来吸引了人们的广泛兴趣。由于量子限域效应,金纳米簇具有不连续的尺寸相关的电子能级,因而表现出类分子性质,如较高的的催化活性、荧光、磁性等,这使得金纳米簇在理论研究和实际应用中表现出巨大的潜力。此外,金纳米簇还具有另一些优越的性质,如制备简单,水溶性好,低毒性,     

水相CdTe纳米晶的合成、生长机理和应用研究

纳米晶在生物检测、光电器件、光波导、可调激光器等领域有着广泛的应用前景．本文以CdTe为例,对近年来水相纳米品合成和生长机理方面的研究进展作了简要的归纳和论述．水相合成纳米晶具有操作简单、价格低廉、在水溶液中稳定性高等优点,并可以通过静电力、范德华力等弱相互作用实现一维、二维甚至三维结构的组装．对纳米晶的生长机理的研究涵盖了热力学主导的Ostwald熟化（Ostwaldripening）机理和动力学控制的聚集机理两个主要方面．文章最后对水相合成CdTe纳米晶的应用进行了总结和展望,     

CdTe/CdS共敏化TiO2电极材料的制备与光电性能

将电沉积法和化学浴沉积法结合,分别将CdTe和CdS量子点纳米晶材料引入到TiO_2纳米管阵列上制备CdTe/CdS量子点共敏化TiO_2光电极。利用扫描电镜、X射线衍射和X射线能量色散光谱等测试手段对所得样品的形貌、晶型和组分进行表征。在模拟太阳光照射条件下,通过电化学工作站测试其光电化学性能。研究结果表明,相对于单一量子点敏化CdS/TiO_2和CdTe/TiO_2光电极而言,共敏化CdTe/CdS/TiO_2光电极表现出更好的光电转化性能,短路电流密度和光电转换效率分别可以达到3.1 m A·cm~(-2)和1.85%。此外,采用电化学阻抗测试技术对材料性能提升的原因进行深入的探究。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.